summaryrefslogtreecommitdiff
path: root/builtin/commit.c
AgeCommit message (Collapse)AuthorFilesLines
2011-06-06Merge branch 'bc/maint-status-z-to-use-porcelain'Libravatar Junio C Hamano1-3/+4
* bc/maint-status-z-to-use-porcelain: builtin/commit.c: set status_format _after_ option parsing t7508: demonstrate status's failure to use --porcelain format with -z Conflicts: builtin/commit.c
2011-05-16Merge branch 'ci/commit--interactive-atomic'Libravatar Junio C Hamano1-12/+34
* ci/commit--interactive-atomic: Test atomic git-commit --interactive Add commit to list of config.singlekey commands Add support for -p/--patch to git-commit Allow git commit --interactive with paths t7501.8: feed a meaningful command Use a temporary index for git commit --interactive
2011-05-11Do not strip empty lines / trailing spaces from a commit message templateLibravatar Boris Faure1-1/+3
Templates should be just that: A form that the user fills out, and forms have blanks. If people are attached to not having extra whitespace in the editor, they can simply clean up their templates. Added test with editor adding even more whitespace. Signed-off-by: Boris Faure <billiob@gmail.com> Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-09Add support for -p/--patch to git-commitLibravatar Conrad Irwin1-3/+7
The --interactive flag is already shared by git add and git commit, share the -p and --patch flags too. Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-09Allow git commit --interactive with pathsLibravatar Conrad Irwin1-2/+0
Make git commit --interactive feel more like git add --interactive by allowing the user to restrict the list of files they have to deal with. A test in t7501 used to ensure that this is not allowed; no need for that anymore. Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-08Use a temporary index for git commit --interactiveLibravatar Conrad Irwin1-8/+28
Change the behaviour of git commit --interactive so that when you abort the commit (by leaving the commit message empty) the index remains unchanged. Hitherto an aborted commit --interactive has added the selected hunks to the index regardless of whether the commit succeeded or not. Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-83/+83
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-26Merge branch 'jc/index-update-if-able'Libravatar Junio C Hamano1-7/+2
* jc/index-update-if-able: update $GIT_INDEX_FILE when there are racily clean entries diff/status: refactor opportunistic index update
2011-03-21diff/status: refactor opportunistic index updateLibravatar Junio C Hamano1-7/+2
When we had to refresh the index internally before running diff or status, we opportunistically updated the $GIT_INDEX_FILE so that later invocation of git can use the lstat(2) we already did in this invocation. Make them share a helper function to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-19Merge branch 'jn/status-translatable'Libravatar Junio C Hamano1-29/+30
* jn/status-translatable: commit, status: use status_printf{,_ln,_more} helpers commit: refer to commit template as s->fp wt-status: add helpers for printing wt-status lines Conflicts: builtin/commit.c
2011-03-19Merge branch 'jk/merge-rename-ux'Libravatar Junio C Hamano1-1/+0
* jk/merge-rename-ux: pull: propagate --progress to merge merge: enable progress reporting for rename detection add inexact rename detection progress infrastructure commit: stop setting rename limit bump rename limit defaults (again) merge: improve inexact rename limit warning
2011-03-09i18n: git-commit advice messagesLibravatar Ævar Arnfjörð Bjarmason1-6/+6
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-commit "enter the commit message" messageLibravatar Ævar Arnfjörð Bjarmason1-5/+5
Gettextize the "# Please enter the commit message for your changes." message. Several tests in t7500-commit.sh and t7502-commit.sh assume that this message starts with a newline. Change the tests to to skip under GETTEXT_POISON=YesPlease. These fail under GETTEXT_POISON=YesPlease because the poison editor message doesn't do the right thing with comments and line breaks, so these messages will be incorrectly broken up across lines. This test should not be skipped under a hypothetical future testing mode that tests Git under language locales, since those messages should all start with a newline like the original. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-commit print_summary messagesLibravatar Ævar Arnfjörð Bjarmason1-2/+2
Gettextize the "(root-commit)" and "detached HEAD" fragments that appear when you commit either the root commit, or a commit in a detached head translatable. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-commit formatting messagesLibravatar Ævar Arnfjörð Bjarmason1-6/+6
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-commit "middle of a merge" messageLibravatar Ævar Arnfjörð Bjarmason1-2/+2
Gettextize the "You are in the middle of a merge -- cannot amend." message. Several tests in t7110-reset-merge.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-commit basic messagesLibravatar Ævar Arnfjörð Bjarmason1-59/+59
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09Merge branch 'js/cherry-pick-usability'Libravatar Junio C Hamano1-42/+114
* js/cherry-pick-usability: Teach commit about CHERRY_PICK_HEAD bash: teach __git_ps1 about CHERRY_PICK_HEAD Introduce CHERRY_PICK_HEAD t3507: introduce pristine-detach helper
2011-03-08commit, status: use status_printf{,_ln,_more} helpersLibravatar Jonathan Nieder1-23/+24
wt-status code is used to provide a reminder of changes included and not included for the commit message template opened in the operator's text editor by "git commit". Therefore each line of its output begins with the comment character "#": # Please enter the commit message for your changes. Lines starting Use the new status_printf{,_ln,_more} functions to take care of adding "#" to the beginning of such status lines automatically. Using these will have two advantages over the current code: - The obvious one is to force separation of the "#" from the translatable part of the message when git learns to translate its output. - Another advantage is that this makes it easier for us to drop "#" prefix in "git status" output in later versions of git if we want to. Explained-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08commit: refer to commit template as s->fpLibravatar Jonathan Nieder1-14/+13
Instead of maintaining a local variable for it, use s->fp to keep track of where the commit message template should be written. This prepares us to take advantage of the status_printf functions, which use a struct wt_status instead of a FILE pointer to determine where to send their output. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08commit, status: use status_printf{,_ln,_more} helpersLibravatar Jonathan Nieder1-23/+24
wt-status code is used to provide a reminder of changes included and not included for the commit message template opened in the operator's text editor by "git commit". Therefore each line of its output begins with the comment character "#": # Please enter the commit message for your changes. Lines starting Use the new status_printf{,_ln,_more} functions to take care of adding "#" to the beginning of such status lines automatically. Using these will have two advantages over the current code: - The obvious one is to force separation of the "#" from the translatable part of the message when git learns to translate its output. - Another advantage is that this makes it easier for us to drop "#" prefix in "git status" output in later versions of git if we want to. Explained-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08commit: refer to commit template as s->fpLibravatar Jonathan Nieder1-14/+13
Instead of maintaining a local variable for it, use s->fp to keep track of where the commit message template should be written. This prepares us to take advantage of the status_printf functions, which use a struct wt_status instead of a FILE pointer to determine where to send their output. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-04Merge branch 'jn/maint-commit-missing-template'Libravatar Junio C Hamano1-1/+1
* jn/maint-commit-missing-template: commit: error out for missing commit message template
2011-02-25commit: error out for missing commit message templateLibravatar Jonathan Nieder1-1/+1
When "git commit" was rewritten in C (v1.5.4-rc0~78^2~30, 2007-11-08), a subtle bug in --template was introduced. If the file named by a --template parameter is missing, previously git would error out with a message: Commit template file does not exist. but in the C version the --template parameter gets ignored and the default template is used. t7500 has two tests for this case which would have caught it, except that with the default $EDITOR, the commit message template is left unmodified, causing 'git commit' to error out and the test to succeed. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21Teach commit about CHERRY_PICK_HEADLibravatar Jay Soffian1-42/+113
Previously the user was advised to use commit -c CHERRY_PICK_HEAD after a conflicting cherry-pick. While this would preserve the original commit's authorship, it would sadly discard cherry-pick's carefully crafted MERGE_MSG (which contains the list of conflicts as well as the original commit-id in the case of cherry-pick -x). On the other hand, if a bare 'commit' were performed, it would preserve the MERGE_MSG while resetting the authorship. In other words, there was no way to simultaneously take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. This change fixes that situation. A bare 'commit' will now take the authorship from CHERRY_PICK_HEAD and the commit message from MERGE_MSG. If the user wishes to reset authorship, that must now be done explicitly via --reset-author. A side-benefit of passing commit authorship along this way is that we can eliminate redundant authorship parsing code from revert.c. (Also removed an unused include from revert.c) Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21Introduce CHERRY_PICK_HEADLibravatar Jay Soffian1-0/+1
When a cherry-pick conflicts git advises: $ git commit -c <original commit id> to preserve the original commit message and authorship. Instead, let's record the original commit id in CHERRY_PICK_HEAD and advise: $ git commit -c CHERRY_PICK_HEAD A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part. Note that we record CHERRY_PICK_HEAD even in the case where there are no conflicts so that we may use it to communicate authorship to commit; this will then allow us to remove set_author_ident_env from revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit is used, as presumably the user intends to further edit the commit and possibly even cherry-pick additional commits on top. Tests and documentation contributed by Jonathan Nieder. Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-21commit: stop setting rename limitLibravatar Jeff King1-1/+0
For its post-commit summary, commit was explicitly setting the default rename limit to 100. Presumably when the code was added, it was necessary to do so. These days, however, it will fall back properly to the diff default, and that default has long since changed from 100. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15Make <identifier> lowercase as per CodingGuidelinesLibravatar Michael J Gruber1-7/+7
*.c part for matches with '"[A-Z]+"'. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15commit,status: describe -u likewiseLibravatar Michael J Gruber1-1/+1
They differ by one character only. Being exactly equal should help translations. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15commit,merge,tag: describe -m likewiseLibravatar Michael J Gruber1-1/+1
This also removes the superfluous "specify" and rewords the misleading "if any" which sounds as if omitting "-m" would omit the merge commit message. (It means "if a merge commit is created at all".) Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15commit,status: describe --porcelain just like pushLibravatar Michael J Gruber1-2/+2
Push has the clearer description, so take that one for all. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-15commit,tag: use same wording for -FLibravatar Michael J Gruber1-1/+1
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-12Merge branch 'maint'Libravatar Junio C Hamano1-2/+2
* maint: commit: suggest --amend --reset-author to fix commiter identity
2011-01-12commit: suggest --amend --reset-author to fix commiter identityLibravatar Matthieu Moy1-2/+2
Since the message advises to fix the configuration first, the advantage of using this command is that it is cut-and-paste ready, while using --author='...' requires the user to type his name and email again. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22Merge branch 'jk/commit-die-on-bogus-ident'Libravatar Junio C Hamano1-22/+32
* jk/commit-die-on-bogus-ident: commit: die before asking to edit the log message ident: die on bogus date format Conflicts: builtin/commit.c
2010-12-20commit: die before asking to edit the log messageLibravatar Junio C Hamano1-22/+32
When determine_author_info() returns to the calling prepare_to_commit(), we already know the pieces of information necessary to determine what author ident will be used in the final message, but deferred making a call to fmt_ident() before the final commit_tree(). Most importantly, we would open the editor to ask the user to compose the log message before it. As one important side effect of fmt_ident() is to error out when the given information is malformed, this resulted in us spawning the editor first and then refusing to commit due to error, even though we had enough information to detect the error before starting the editor, which was annoying. Move the fmt_ident() call to the end of determine_author_info() where we have final determination of author info to rectify this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-16Merge branch 'aa/status-hilite-branch'Libravatar Junio C Hamano1-0/+2
* aa/status-hilite-branch: default color.status.branch to "same as header" status: show branchname with a configurable color
2010-12-12Merge branch 'jn/git-cmd-h-bypass-setup'Libravatar Junio C Hamano1-0/+6
* jn/git-cmd-h-bypass-setup: update-index -h: show usage even with corrupt index merge -h: show usage even with corrupt index ls-files -h: show usage even with corrupt index gc -h: show usage even with broken configuration commit/status -h: show usage even with broken configuration checkout-index -h: show usage even in an invalid repository branch -h: show usage even in an invalid repository Conflicts: builtin/merge.c
2010-12-03Merge branch 'pn/commit-autosquash'Libravatar Junio C Hamano1-27/+54
* pn/commit-autosquash: add tests of commit --squash commit: --squash option for use with rebase --autosquash add tests of commit --fixup commit: --fixup option for use with rebase --autosquash pretty.c: teach format_commit_message() to reencode the output commit: helper methods to reduce redundant blocks of code Conflicts: Documentation/git-commit.txt t/t3415-rebase-autosquash.sh
2010-11-29status: show branchname with a configurable colorLibravatar Aleksi Aalto1-0/+2
You can tell "git status" to paint the name of the current branch in its output (the line that says "On branch ...") by setting the configuration variable color.status.branch; it is by default turned off. Signed-off-by: Aleksi Aalto <aga@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-15Describe various forms of "be quiet" using OPT__QUIETLibravatar Jonathan Nieder1-2/+2
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-15add description parameter to OPT__QUIETLibravatar René Scharfe1-1/+1
Allows better help text to be defined than "be quiet". Also make use of the macro in a place that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-15add description parameter to OPT__VERBOSELibravatar René Scharfe1-2/+2
Allows better help text to be defined than "be verbose". Also make use of the macro in places that already had a different description. No object code changes intended. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04commit: --squash option for use with rebase --autosquashLibravatar Pat Notz1-2/+33
This option makes it convenient to construct commit messages for use with 'rebase --autosquash'. The resulting commit message will be "squash! ..." where "..." is the subject line of the specified commit message. This option can be used with other commit message options such as -m, -c, -C and -F. If an editor is invoked (as with -c or -eF or no message options) the commit message is seeded with the correctly formatted subject line. Example usage: $ git commit --squash HEAD~2 $ git commit --squash HEAD~2 -m "clever comment" $ git commit --squash HEAD~2 -F msgfile $ git commit --squash HEAD~2 -C deadbeef Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04commit: --fixup option for use with rebase --autosquashLibravatar Pat Notz1-4/+18
This option makes it convenient to construct commit messages for use with 'rebase --autosquash'. The resulting commit message will be "fixup! ..." where "..." is the subject line of the specified commit message. Example usage: $ git commit --fixup HEAD~2 Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-04commit: helper methods to reduce redundant blocks of codeLibravatar Pat Notz1-22/+4
* builtin/commit.c: Replace block of code with a one-liner call to logmsg_reencode(). * commit.c: new function for looking up a comit by name * pretty.c: helper methods for getting output encodings Add helpers get_log_output_encoding() and get_commit_output_encoding() that eliminate some messy and duplicate if-blocks. Signed-off-by: Pat Notz <patnotz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-22commit/status -h: show usage even with broken configurationLibravatar Nguyễn Thái Ngọc Duy1-0/+6
"git status" and "git commit" read .git/config and .gitmodules before parsing options, but there is no reason to access a repository at all when the caller just wanted to know what arguments are accepted. [jn: rewrote the log message and added test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18Merge branch 'jl/submodule-ignore-diff'Libravatar Junio C Hamano1-0/+2
* jl/submodule-ignore-diff: Add tests for the diff.ignoreSubmodules config option Add the 'diff.ignoreSubmodules' config setting Submodules: Use "ignore" settings from .gitmodules too for diff and status Submodules: Add the new "ignore" config option for diff and status Conflicts: diff.c
2010-08-18Merge branch 'jn/fix-abbrev'Libravatar Junio C Hamano1-1/+0
* jn/fix-abbrev: examples/commit: use --abbrev for commit summary checkout, commit: remove confusing assignments to rev.abbrev archive: abbreviate substituted commit ids again
2010-08-09Submodules: Use "ignore" settings from .gitmodules too for diff and statusLibravatar Jens Lehmann1-0/+2
The .gitmodules file is parsed for "submodule.<name>.ignore" entries before looking for them in .git/config. Thus settings found in .git/config will override those from .gitmodules, thereby allowing the local developer to ignore settings given by the remote side while also letting upstream set defaults for those users who don't have special needs. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 12:54:13 +0000