summaryrefslogtreecommitdiff
path: root/builtin/clone.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-13Merge branch 'jh/partial-clone'Libravatar Junio C Hamano1-2/+20
The machinery to clone & fetch, which in turn involves packing and unpacking objects, have been told how to omit certain objects using the filtering mechanism introduced by the jh/object-filtering topic, and also mark the resulting pack as a promisor pack to tolerate missing objects, taking advantage of the mechanism introduced by the jh/fsck-promisors topic. * jh/partial-clone: t5616: test bulk prefetch after partial fetch fetch: inherit filter-spec from partial clone t5616: end-to-end tests for partial clone fetch-pack: restore save_commit_buffer after use unpack-trees: batch fetching of missing blobs clone: partial clone partial-clone: define partial clone settings in config fetch: support filters fetch: refactor calculation of remote list fetch-pack: test support excluding large blobs fetch-pack: add --no-filter fetch-pack, index-pack, transport: partial clone upload-pack: add object filtering for partial clone
2018-01-23Merge branch 'jk/abort-clone-with-existing-dest'Libravatar Junio C Hamano1-7/+24
"git clone $there $here" is allowed even when here directory exists as long as it is an empty directory, but the command incorrectly removed it upon a failure of the operation. * jk/abort-clone-with-existing-dest: clone: do not clean up directories we didn't create clone: factor out dir_exists() helper t5600: modernize style t5600: fix outdated comment about unborn HEAD
2018-01-03clone: do not clean up directories we didn't createLibravatar Jeff King1-4/+16
Once upon a time, git-clone would refuse to write into a directory that it did not itself create. The cleanup routines for a failed clone could therefore just remove the git and worktree dirs completely. In 55892d2398 (Allow cloning to an existing empty directory, 2009-01-11), we learned to write into an existing directory. Which means that doing: mkdir foo git clone will-fail foo ends up deleting foo. This isn't a huge catastrophe, since by definition foo must be empty. But it's somewhat confusing; we should leave the filesystem as we found it. Because we know that the only directory we'll write into is an empty one, we can handle this case by just passing the KEEP_TOPLEVEL flag to our recursive delete (if we could write into populated directories, we'd have to keep track of what we wrote and what we did not, which would be much harder). Note that we need to handle the work-tree and git-dir separately, though, as only one might exist (and the new tests in t5600 cover all cases). Reported-by: Stephan Janssen <sjanssen@you-get.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-01-03clone: factor out dir_exists() helperLibravatar Jeff King1-3/+8
Two parts of git-clone's setup logic check whether a directory exists, and they both call stat directly with the same scratch "struct stat" buffer. Let's pull that into a helper, which has a few advantages: - it makes the purpose of the stat calls more obvious - it makes it clear that we don't care about the information in "buf" remaining valid - if we later decide to make the check more robust (e.g., complaining about non-directories), we can do it in one place Note that we could just use file_exists() for this, which has identical code. But we specifically care about directories, so this future-proofs us against that function later getting more picky about seeing actual files. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-28Merge branch 'jt/transport-hide-vtable'Libravatar Junio C Hamano1-3/+0
Code clean-up. * jt/transport-hide-vtable: transport: make transport vtable more private clone, fetch: remove redundant transport check
2017-12-27Merge branch 'es/clone-shared-worktree'Libravatar Junio C Hamano1-1/+2
"git clone --shared" to borrow from a (secondary) worktree did not work, even though "git clone --local" did. Both are now accepted. * es/clone-shared-worktree: clone: support 'clone --shared' from a worktree
2017-12-14clone, fetch: remove redundant transport checkLibravatar Jonathan Tan1-3/+0
Prior to commit a2d725b7bdf7 ("Use an external program to implement fetching with curl", 2009-08-05), if Git was compiled with NO_CURL, the get_refs_list and fetch methods in struct transport might not be populated, hence the checks in clone and fetch. After that commit, all transports populate get_refs_list and fetch, making the checks in clone and fetch redundant. Remove those checks. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-11clone: support 'clone --shared' from a worktreeLibravatar Eric Sunshine1-1/+2
When worktree functionality was originally implemented, the possibility of 'clone --local' from within a worktree was overlooked, with the result that the location of the "objects" directory of the source repository was computed incorrectly, thus the objects could not be copied or hard-linked by the clone. This shortcoming was addressed by 744e469755 (clone: allow --local from a linked checkout, 2015-09-28). However, the related case of 'clone --shared' (despite being handled only a few lines away from the 'clone --local' case) was not fixed by 744e469755, with a similar result of the "objects" directory location being incorrectly computed for insertion into the 'alternates' file. Fix this. Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08clone: partial cloneLibravatar Jonathan Tan1-2/+20
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-15Merge branch 'mh/tidy-ref-update-flags'Libravatar Junio C Hamano1-2/+2
Code clean-up in refs API implementation. * mh/tidy-ref-update-flags: refs: update some more docs to use "oid" rather than "sha1" write_packed_entry(): take `object_id` arguments refs: rename constant `REF_ISPRUNING` to `REF_IS_PRUNING` refs: rename constant `REF_NODEREF` to `REF_NO_DEREF` refs: tidy up and adjust visibility of the `ref_update` flags ref_transaction_add_update(): remove a check ref_transaction_update(): die on disallowed flags prune_ref(): call `ref_transaction_add_update()` directly files_transaction_prepare(): don't leak flags to packed transaction
2017-11-06Merge branch 'bc/object-id'Libravatar Junio C Hamano1-11/+11
Conversion from uchar[20] to struct object_id continues. * bc/object-id: (25 commits) refs/files-backend: convert static functions to object_id refs: convert read_raw_ref backends to struct object_id refs: convert peel_object to struct object_id refs: convert resolve_ref_unsafe to struct object_id worktree: convert struct worktree to object_id refs: convert resolve_gitlink_ref to struct object_id Convert remaining callers of resolve_gitlink_ref to object_id sha1_file: convert index_path and index_fd to struct object_id refs: convert reflog_expire parameter to struct object_id refs: convert read_ref_at to struct object_id refs: convert peel_ref to struct object_id builtin/pack-objects: convert to struct object_id pack-bitmap: convert traverse_bitmap_commit_list to object_id refs: convert dwim_log to struct object_id builtin/reflog: convert remaining unsigned char uses to object_id refs: convert dwim_ref and expand_ref to struct object_id refs: convert read_ref and read_ref_full to object_id refs: convert resolve_refdup and refs_resolve_refdup to struct object_id Convert check_connected to use struct object_id refs: update ref transactions to use struct object_id ...
2017-11-06refs: rename constant `REF_NODEREF` to `REF_NO_DEREF`Libravatar Michael Haggerty1-2/+2
Even after working with this code for years, I still see this constant name as "ref node ref". Rename it to make it's meaning clearer. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: convert resolve_refdup and refs_resolve_refdup to struct object_idLibravatar brian m. carlson1-1/+1
All of the callers already pass the hash member of struct object_id, so update them to pass a pointer to the struct directly, This transformation was done with an update to declaration and definition and the following semantic patch: @@ expression E1, E2, E3, E4; @@ - resolve_refdup(E1, E2, E3.hash, E4) + resolve_refdup(E1, E2, &E3, E4) @@ expression E1, E2, E3, E4; @@ - resolve_refdup(E1, E2, E3->hash, E4) + resolve_refdup(E1, E2, E3, E4) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16Convert check_connected to use struct object_idLibravatar brian m. carlson1-2/+2
Convert check_connected and the callbacks it takes to use struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: update ref transactions to use struct object_idLibravatar brian m. carlson1-1/+1
Update the ref transaction code to use struct object_id. Remove one NULL pointer check which was previously inserted around a dereference; since we now pass a pointer to struct object_id directly through, the code we're calling handles this for us. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-16refs: convert update_ref and refs_update_ref to use struct object_idLibravatar brian m. carlson1-7/+7
Convert update_ref, refs_update_ref, and write_pseudoref to use struct object_id. Update the existing callers as well. Remove update_ref_oid, as it is no longer needed. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06treewide: prefer lockfiles on the stackLibravatar Martin Ågren1-4/+3
There is no longer any need to allocate and leak a `struct lock_file`. The previous patch addressed an instance where we needed a minor tweak alongside the trivial changes. Deal with the remaining instances where we allocate and leak a struct within a single function. Change them to have the `struct lock_file` on the stack instead. These instances were identified by running `git grep "^\s*struct lock_file\s*\*"`. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-07clone: release strbuf after use in remove_junk()Libravatar Rene Scharfe1-1/+1
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-23pack: move pack-closing functionsLibravatar Jonathan Tan1-0/+1
The function close_pack_fd() needs to be temporarily made global. Its scope will be restored to static in a subsequent commit. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-22Merge branch 'bw/clone-recursive-quiet'Libravatar Junio C Hamano1-0/+3
"git clone --recurse-submodules --quiet" did not pass the quiet option down to submodules. * bw/clone-recursive-quiet: clone: teach recursive clones to respect -q
2017-08-04clone: teach recursive clones to respect -qLibravatar Brandon Williams1-0/+3
Teach 'git clone --recurse-submodules' to respect the '-q' option by passing down the quiet flag to the process which handles cloning of submodules. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'bw/config-h'Libravatar Junio C Hamano1-0/+1
Fix configuration codepath to pay proper attention to commondir that is used in multi-worktree situation, and isolate config API into its own header file. * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-13Merge branch 'nd/fopen-errors'Libravatar Junio C Hamano1-1/+1
We often try to open a file for reading whose existence is optional, and silently ignore errors from open/fopen; report such errors if they are not due to missing files. * nd/fopen-errors: mingw_fopen: report ENOENT for invalid file names mingw: verify that paths are not mistaken for remote nicknames log: fix memory leak in open_next_file() rerere.c: move error_errno() closer to the source system call print errno when reporting a system call error wrapper.c: make warn_on_inaccessible() static wrapper.c: add and use fopen_or_warn() wrapper.c: add and use warn_on_fopen_errors() config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD clone: use xfopen() instead of fopen() use xfopen() in more places git_fopen: fix a sparse 'not declared' warning
2017-06-05Merge branch 'jn/clone-add-empty-config-from-command-line' into maintLibravatar Junio C Hamano1-1/+3
"git clone --config var=val" is a way to populate the per-repository configuration file of the new repository, but it did not work well when val is an empty string. This has been fixed. * jn/clone-add-empty-config-from-command-line: clone: handle empty config values in -c
2017-05-29Merge branch 'bc/object-id'Libravatar Junio C Hamano1-2/+2
Conversion from uchar[20] to struct object_id continues. * bc/object-id: (53 commits) object: convert parse_object* to take struct object_id tree: convert parse_tree_indirect to struct object_id sequencer: convert do_recursive_merge to struct object_id diff-lib: convert do_diff_cache to struct object_id builtin/ls-tree: convert to struct object_id merge: convert checkout_fast_forward to struct object_id sequencer: convert fast_forward_to to struct object_id builtin/ls-files: convert overlay_tree_on_cache to object_id builtin/read-tree: convert to struct object_id sha1_name: convert internals of peel_onion to object_id upload-pack: convert remaining parse_object callers to object_id revision: convert remaining parse_object callers to object_id revision: rename add_pending_sha1 to add_pending_oid http-push: convert process_ls_object and descendants to object_id refs/files-backend: convert many internals to struct object_id refs: convert struct ref_update to use struct object_id ref-filter: convert some static functions to struct object_id Convert struct ref_array_item to struct object_id Convert the verify_pack callback to struct object_id Convert lookup_tag to struct object_id ...
2017-05-26clone: use xfopen() instead of fopen()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
copy_alternates() called fopen() without handling errors. By switching to xfopen(), this bug is fixed. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-16Merge branch 'jn/clone-add-empty-config-from-command-line'Libravatar Junio C Hamano1-1/+3
"git clone --config var=val" is a way to populate the per-repository configuration file of the new repository, but it did not work well when val is an empty string. This has been fixed. * jn/clone-add-empty-config-from-command-line: clone: handle empty config values in -c
2017-05-08tree: convert parse_tree_indirect to struct object_idLibravatar brian m. carlson1-1/+1
Convert parse_tree_indirect to take a pointer to struct object_id. Update all the callers. This transformation was achieved using the following semantic patch and manual updates to the declaration and definition. Update builtin/checkout.c manually as well, since it uses a ternary expression not handled by the semantic patch. @@ expression E1; @@ - parse_tree_indirect(E1.hash) + parse_tree_indirect(&E1) @@ expression E1; @@ - parse_tree_indirect(E1->hash) + parse_tree_indirect(E1) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-08Convert lookup_commit* to struct object_idLibravatar brian m. carlson1-1/+1
Convert lookup_commit, lookup_commit_or_die, lookup_commit_reference, and lookup_commit_reference_gently to take struct object_id arguments. Introduce a temporary in parse_object buffer in order to convert this function. This is required since in order to convert parse_object and parse_object_buffer, lookup_commit_reference_gently and lookup_commit_or_die would need to be converted. Not introducing a temporary would therefore require that lookup_commit_or_die take a struct object_id *, but lookup_commit would take unsigned char *, leaving a confusing and hard-to-use interface. parse_object_buffer will lose this temporary in a later patch. This commit was created with manual changes to commit.c, commit.h, and object.c, plus the following semantic patch: @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1.hash, E2) + lookup_commit_reference_gently(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_reference_gently(E1->hash, E2) + lookup_commit_reference_gently(E1, E2) @@ expression E1; @@ - lookup_commit_reference(E1.hash) + lookup_commit_reference(&E1) @@ expression E1; @@ - lookup_commit_reference(E1->hash) + lookup_commit_reference(E1) @@ expression E1; @@ - lookup_commit(E1.hash) + lookup_commit(&E1) @@ expression E1; @@ - lookup_commit(E1->hash) + lookup_commit(E1) @@ expression E1, E2; @@ - lookup_commit_or_die(E1.hash, E2) + lookup_commit_or_die(&E1, E2) @@ expression E1, E2; @@ - lookup_commit_or_die(E1->hash, E2) + lookup_commit_or_die(E1, E2) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-02clone: handle empty config values in -cLibravatar Jonathan Nieder1-1/+3
"git clone --config" uses the following incantation to add an item to a config file, instead of replacing an existing value: git_config_set_multivar_gently(key, value, "^$", 0) As long as no existing value matches the regex ^$, that works as intended and adds to the config. When a value is empty, though, it replaces the existing value. Noticed while trying to set credential.helper during a clone to use a specific helper without inheriting from ~/.gitconfig and /etc/gitconfig. That is, I ran git clone -c credential.helper= \ -c credential.helper=myhelper \ https://example.com/repo intending to produce the configuration [credential] helper = helper = myhelper Without this patch, the 'helper =' line is not included and the credential helper from /etc/gitconfig gets used. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-01clone: add a --no-tags option to clone without tagsLibravatar Ævar Arnfjörð Bjarmason1-2/+11
Add a --no-tags option to clone without fetching any tags. Without this change there's no easy way to clone a repository without also fetching its tags. When supplying --single-branch the primary remote branch will be cloned, but in addition tags will be followed & retrieved. Now --no-tags can be added --single-branch to clone a repository without tags, and which only tracks a single upstream branch. This option works without --single-branch as well, and will do a normal clone but not fetch any tags. Many git commands pay some fixed overhead as a function of the number of references. E.g. creating ~40k tags in linux.git will cause a command like `git log -1 >/dev/null` to run in over a second instead of in a matter of milliseconds, in addition numerous other things will slow down, e.g. "git log <TAB>" with the bash completion will slowly show ~40k references instead of 1. The user might want to avoid all of that overhead to simply use a repository like that to browse the "master" branch, or something like a CI tool might want to keep that one branch up-to-date without caring about any other references. Without this change the only way of accomplishing this was either by manually tweaking the config in a fresh repository: git init git && cat >git/.git/config <<EOF && [remote "origin"] url = git@github.com:git/git.git tagOpt = --no-tags fetch = +refs/heads/master:refs/remotes/origin/master [branch "master"] remote = origin merge = refs/heads/master EOF cd git && git pull Which requires hardcoding the "master" name, which may not be the main --single-branch would have retrieved, or alternatively by setting tagOpt=--no-tags right after cloning & deleting any existing tags: git clone --single-branch git@github.com:git/git.git && cd git && git config remote.origin.tagOpt --no-tags && git tag -l | xargs git tag -d Which of course was also subtly buggy if --branch was pointed at a tag, leaving the user in a detached head: git clone --single-branch --branch v2.12.0 git@github.com:git/git.git && cd git && git config remote.origin.tagOpt --no-tags && git tag -l | xargs git tag -d Now all this complexity becomes the much simpler: git clone --single-branch --no-tags git@github.com:git/git.git Or in the case of cloning a single tag "branch": git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-30Merge branch 'bw/submodule-is-active'Libravatar Junio C Hamano1-7/+43
"what URL do we want to update this submodule?" and "are we interested in this submodule?" are split into two distinct concepts, and then the way used to express the latter got extended, paving a way to make it easier to manage a project with many submodules and make it possible to later extend use of multiple worktrees for a project with submodules. * bw/submodule-is-active: submodule add: respect submodule.active and submodule.<name>.active submodule--helper init: set submodule.<name>.active clone: teach --recurse-submodules to optionally take a pathspec submodule init: initialize active submodules submodule: decouple url and submodule interest submodule--helper clone: check for configured submodules using helper submodule sync: use submodule--helper is-active submodule sync: skip work for inactive submodules submodule status: use submodule--helper is-active submodule--helper: add is-active subcommand
2017-03-18clone: teach --recurse-submodules to optionally take a pathspecLibravatar Brandon Williams1-7/+43
Teach clone --recurse-submodules to optionally take a pathspec argument which describes which submodules should be recursively initialized and cloned. If no pathspec is provided, --recurse-submodules will recursively initialize and clone all submodules by using a default pathspec of ".". In order to construct more complex pathspecs, --recurse-submodules can be given multiple times. This also configures the 'submodule.active' configuration option to be the given pathspec, such that any future invocation of `git submodule update` will keep up with the pathspec. Additionally the switch '--recurse' is removed from the Documentation as well as marked hidden in the options array, to streamline the options for submodules. A simple '--recurse' doesn't convey what is being recursed, e.g. it could mean directories or trees (c.f. ls-tree) In a lot of other commands we already have '--recurse-submodules' to mean recursing into submodules, so advertise this spelling here as the genuine option. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-22builtin/clone: convert to struct object_idLibravatar brian m. carlson1-5/+5
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-02Merge branch 'rs/absolute-pathdup'Libravatar Junio C Hamano1-2/+2
Code cleanup. * rs/absolute-pathdup: use absolute_pathdup() abspath: add absolute_pathdup()
2017-01-27use absolute_pathdup()Libravatar René Scharfe1-2/+2
Apply the semantic patch for converting callers that duplicate the result of absolute_path() to call absolute_pathdup() instead, which avoids an extra string copy to a static buffer. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-19Merge branch 'jc/lock-report-on-error'Libravatar Junio C Hamano1-1/+1
Git 2.11 had a minor regression in "merge --ff-only" that competed with another process that simultanously attempted to update the index. We used to explain what went wrong with an error message, but the new code silently failed. The error message has been resurrected. * jc/lock-report-on-error: lockfile: LOCK_REPORT_ON_ERROR hold_locked_index(): align error handling with hold_lockfile_for_update() wt-status: implement opportunisitc index update correctly
2016-12-07hold_locked_index(): align error handling with hold_lockfile_for_update()Libravatar Junio C Hamano1-1/+1
Callers of the hold_locked_index() function pass 0 when they want to prepare to write a new version of the index file without wishing to die or emit an error message when the request fails (e.g. somebody else already held the lock), and pass 1 when they want the call to die upon failure. This option is called LOCK_DIE_ON_ERROR by the underlying lockfile API, and the hold_locked_index() function translates the paramter to LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update(). Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop translating. Callers other than the ones that are replaced with this change pass '0' to the function; no behaviour change is intended with this patch. Signed-off-by: Junio C Hamano <gitster@pobox.com> --- Among the callers of hold_locked_index() that passes 0: - diff.c::refresh_index_quietly() at the end of "git diff" is an opportunistic update; it leaks the lockfile structure but it is just before the program exits and nobody should care. - builtin/describe.c::cmd_describe(), builtin/commit.c::cmd_status(), sequencer.c::read_and_refresh_cache() are all opportunistic updates and they are OK. - builtin/update-index.c::cmd_update_index() takes a lock upfront but we may end up not needing to update the index (i.e. the entries may be fully up-to-date), in which case we do not need to issue an error upon failure to acquire the lock. We do diagnose and die if we indeed need to update, so it is OK. - wt-status.c::require_clean_work_tree() IS BUGGY. It asks silence, does not check the returned value. Compare with callsites like cmd_describe() and cmd_status() to notice that it is wrong to call update_index_if_able() unconditionally.
2016-12-05clone,fetch: explain the shallow-clone option a little more clearlyLibravatar Alex Henrie1-1/+1
"deepen by excluding" does not make sense because excluding a revision does not deepen a repository; it makes the repository more shallow. Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-28Merge branch 'jk/clone-copy-alternates-fix' into maintLibravatar Junio C Hamano1-2/+5
"git clone" of a local repository can be done at the filesystem level, but the codepath did not check errors while copying and adjusting the file that lists alternate object stores. * jk/clone-copy-alternates-fix: clone: detect errors in normalize_path_copy
2016-10-17Merge branch 'jk/clone-copy-alternates-fix'Libravatar Junio C Hamano1-2/+5
"git clone" of a local repository can be done at the filesystem level, but the codepath did not check errors while copying and adjusting the file that lists alternate object stores. * jk/clone-copy-alternates-fix: clone: detect errors in normalize_path_copy
2016-10-10Merge branch 'nd/shallow-deepen'Libravatar Junio C Hamano1-3/+21
The existing "git fetch --depth=<n>" option was hard to use correctly when making the history of an existing shallow clone deeper. A new option, "--deepen=<n>", has been added to make this easier to use. "git clone" also learned "--shallow-since=<date>" and "--shallow-exclude=<tag>" options to make it easier to specify "I am interested only in the recent N months worth of history" and "Give me only the history since that version". * nd/shallow-deepen: (27 commits) fetch, upload-pack: --deepen=N extends shallow boundary by N commits upload-pack: add get_reachable_list() upload-pack: split check_unreachable() in two, prep for get_reachable_list() t5500, t5539: tests for shallow depth excluding a ref clone: define shallow clone boundary with --shallow-exclude fetch: define shallow boundary with --shallow-exclude upload-pack: support define shallow boundary by excluding revisions refs: add expand_ref() t5500, t5539: tests for shallow depth since a specific date clone: define shallow clone boundary based on time with --shallow-since fetch: define shallow boundary with --shallow-since upload-pack: add deepen-since to cut shallow repos based on time shallow.c: implement a generic shallow boundary finder based on rev-list fetch-pack: use a separate flag for fetch in deepening mode fetch-pack.c: mark strings for translating fetch-pack: use a common function for verbose printing fetch-pack: use skip_prefix() instead of starts_with() upload-pack: move rev-list code out of check_non_tip() upload-pack: make check_non_tip() clean things up on error upload-pack: tighten number parsing at "deepen" lines ...
2016-10-05clone: detect errors in normalize_path_copyLibravatar Jeff King1-2/+5
When we are copying the alternates from the source repository, if we find a relative path that is too deep for the source (e.g., "../../../objects" from "/repo.git/objects"), then normalize_path_copy will report an error and leave trash in the buffer, which we will add to our new alternates file. Instead, let's detect the error, print a warning, and skip copying that alternate. There's no need to die. The relative path is probably just broken cruft in the source repo. If it turns out to have been important for accessing some objects, we rely on other parts of the clone to detect that, just as they would with a missing object in the source repo itself (though note that clones with "-s" are inherently local, which may do fewer object-quality checks in the first place). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-03Merge branch 'nd/init-core-worktree-in-multi-worktree-world'Libravatar Junio C Hamano1-8/+6
"git init" tried to record core.worktree in the repository's 'config' file when GIT_WORK_TREE environment variable was set and it was different from where GIT_DIR appears as ".git" at its top, but the logic was faulty when .git is a "gitdir:" file that points at the real place, causing trouble in working trees that are managed by "git worktree". This has been corrected. * nd/init-core-worktree-in-multi-worktree-world: init: kill git_link variable init: do not set unnecessary core.worktree init: kill set_git_dir_init() init: call set_git_dir_init() from within init_db() init: correct re-initialization from a linked worktree
2016-09-25init: call set_git_dir_init() from within init_db()Libravatar Nguyễn Thái Ngọc Duy1-8/+7
The next commit requires that set_git_dir_init() must be called before init_db(). Let's make sure nobody can do otherwise. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-22clone: pass --progress decision to recursive submodulesLibravatar Jeff King1-2/+14
When cloning with "--recursive", we'd generally expect submodules to show progress reports if the main clone did, too. In older versions of git, this mostly worked out of the box. Since we show progress by default when stderr is a tty, and since the child clones inherit the parent stderr, then both processes would come to the same decision by default. If the parent clone was asked for "--quiet", we passed down "--quiet" to the child. However, if stderr was not a tty and the user specified "--progress", we did not propagate this to the child. That's a minor bug, but things got much worse when we switched recently to submodule--helper's update_clone command. With that change, the stderr of the child clones are always connected to a pipe, and we never output progress at all. This patch teaches git-submodule and git-submodule--helper how to pass down an explicit "--progress" flag when cloning. The clone command then decides to propagate that flag based on the cloning decision made earlier (which takes into account isatty(2) of the parent process, existing --progress or --quiet flags, etc). Since the child processes always run without a tty on stderr, we don't have to worry about passing an explicit "--no-progress"; it's the default for them. This fixes the recent loss of progress during recursive clones. And as a bonus, it makes: git clone --recursive --progress ... 2>&1 | cat work by triggering progress explicitly in the children. Signed-off-by: Jeff King <peff@peff.net> Acked-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-17clone: recursive and reference option triggers submodule alternatesLibravatar Stefan Beller1-0/+19
When `--recursive` and `--reference` is given, it is reasonable to expect that the submodules are created with references to the submodules of the given alternate for the superproject. An initial attempt to do this was presented to the mailing list, which used flags that are passed around ("--super-reference") that instructed the submodule clone to look for a reference in the submodules of the referenced superproject. This is not well thought out, as any further `submodule update` should also respect the initial setup. When a new submodule is added to the superproject and the alternate of the superproject does not know about that submodule yet, we rather error out informing the user instead of being unclear if we did or did not use a submodules alternate. To solve this problem introduce new options that store the configuration for what the user wanted originally. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-15clone: implement optional referencesLibravatar Stefan Beller1-10/+25
In a later patch we want to try to create alternates for submodules, but they might not exist in the referenced superproject. So add a way to skip the non existing references and report them. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-15clone: clarify option_reference as requiredLibravatar Stefan Beller1-4/+4
In the next patch we introduce optional references; To better distinguish between optional and required references we rename the variable. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>