summaryrefslogtreecommitdiff
path: root/builtin/clean.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-13color: check color.ui in git_default_config()Libravatar Jeff King1-2/+1
Back in prehistoric times, our decision on whether or not to show color by default relied on using a config callback that either did or didn't load color config like color.diff. When we introduced color.ui, we put it in the same boat: commands had to manually respect it by using git_color_config() or its git_color_default_config() convenience wrapper. But in 4c7f1819b (make color.ui default to 'auto', 2013-06-10), that changed. Since then, we default color.ui to auto in all programs, meaning that even plumbing commands like "git diff-tree --pretty" might colorize the output. Nobody seems to have complained in the intervening years, presumably because the "is stdout a tty" check does a good job of catching the right cases. But that leaves an interesting curiosity: color.ui defaults to auto even in plumbing, but you can't actually _disable_ the color via config. So if you really hate color and set "color.ui" to false, diff-tree will still show color (but porcelain like git-diff won't). Nobody noticed that either, probably because very few people disable color. One could argue that the plumbing should _always_ disable color unless an explicit --color option is given on the command line. But in practice, this creates a lot of complications for scripts which do want plumbing to show user-visible output. They can't just pass "--color" blindly; they need to check the user's config and decide what to send. Given that nobody has complained about the current behavior, let's assume it's a good path, and follow it to its conclusion: supporting color.ui everywhere. Note that you can create havoc by setting color.ui=always in your config, but that's more or less already the case. We could disallow it entirely, but it is handy for one-offs like: git -c color.ui=always foo >not-a-tty when "foo" does not take a --color option itself. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'ab/free-and-null'Libravatar Junio C Hamano1-4/+2
A common pattern to free a piece of memory and assign NULL to the pointer that used to point at it has been replaced with a new FREE_AND_NULL() macro. * ab/free-and-null: *.[ch] refactoring: make use of the FREE_AND_NULL() macro coccinelle: make use of the "expression" FREE_AND_NULL() rule coccinelle: add a rule to make "expression" code use FREE_AND_NULL() coccinelle: make use of the "type" FREE_AND_NULL() rule coccinelle: add a rule to make "type" code use FREE_AND_NULL() git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
2017-06-24Merge branch 'bw/config-h'Libravatar Junio C Hamano1-0/+1
Fix configuration codepath to pay proper attention to commondir that is used in multi-worktree situation, and isolate config API into its own header file. * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h
2017-06-16coccinelle: make use of the "type" FREE_AND_NULL() ruleLibravatar Ævar Arnfjörð Bjarmason1-4/+2
Apply the result of the just-added coccinelle rule. This manually excludes a few occurrences, mostly things that resulted in many FREE_AND_NULL() on one line, that'll be manually fixed in a subsequent change. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-15config: don't include config.h by defaultLibravatar Brandon Williams1-0/+1
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-02Merge branch 'sl/clean-d-ignored-fix'Libravatar Junio C Hamano1-0/+42
"git clean -d" used to clean directories that has ignored files, even though the command should not lose ignored ones without "-x". "git status --ignored" did not list ignored and untracked files without "-uall". These have been corrected. * sl/clean-d-ignored-fix: clean: teach clean -d to preserve ignored paths dir: expose cmp_name() and check_contains() dir: hide untracked contents of untracked dirs dir: recurse into untracked dirs for ignored files t7061: status --ignored should search untracked dirs t7300: clean -d should skip dirs with ignored files
2017-05-24clean: teach clean -d to preserve ignored pathsLibravatar Samuel Lijin1-0/+42
There is an implicit assumption that a directory containing only untracked and ignored paths should itself be considered untracked. This makes sense in use cases where we're asking if a directory should be added to the git database, but not when we're asking if a directory can be safely removed from the working tree; as a result, clean -d would assume that an "untracked" directory containing ignored paths could be deleted, even though doing so would also remove the ignored paths. To get around this, we teach clean -d to collect ignored paths and skip an untracked directory if it contained an ignored path, instead just removing the untracked contents thereof. To achieve this, cmd_clean() has to collect all untracked contents of untracked directories, in addition to all ignored paths, to determine which untracked dirs must be skipped (because they contain ignored paths) and which ones should *not* be skipped. For this purpose, correct_untracked_entries() is introduced to prune a given dir_struct of untracked entries containing ignored paths and those untracked entries encompassed by the untracked entries which are not pruned away. A memory leak is also fixed in cmd_clean(). This also fixes the known breakage in t7300, since clean -d now skips untracked directories containing ignored paths. Signed-off-by: Samuel Lijin <sxlijin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-06dir: convert fill_directory to take an indexLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-06dir: convert is_excluded to take an indexLibravatar Brandon Williams1-1/+1
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-27Merge branch 'nd/clean-preserve-errno-in-warning'Libravatar Junio C Hamano1-4/+12
Some warning() messages from "git clean" were updated to show the errno from failed system calls. * nd/clean-preserve-errno-in-warning: clean: use warning_errno() when appropriate
2017-02-16clean: use warning_errno() when appropriateLibravatar Nguyễn Thái Ngọc Duy1-4/+12
All these warning() calls are preceded by a system call. Report the actual error to help the user understand why we fail to remove something. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-14i18n: clean.c: match string with git-add--interactive.perlLibravatar Vasco Almeida1-5/+5
Change strings for help to match the ones in git-add--interactive.perl. The strings now represent one entry to translate each rather then two entries each different only by an ending newline character. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-26Merge branch 'jk/tighten-alloc'Libravatar Junio C Hamano1-2/+2
Update various codepaths to avoid manually-counted malloc(). * jk/tighten-alloc: (22 commits) ewah: convert to REALLOC_ARRAY, etc convert ewah/bitmap code to use xmalloc diff_populate_gitlink: use a strbuf transport_anonymize_url: use xstrfmt git-compat-util: drop mempcpy compat code sequencer: simplify memory allocation of get_message test-path-utils: fix normalize_path_copy output buffer size fetch-pack: simplify add_sought_entry fast-import: simplify allocation in start_packfile write_untracked_extension: use FLEX_ALLOC helper prepare_{git,shell}_cmd: use argv_array use st_add and st_mult for allocation size computation convert trivial cases to FLEX_ARRAY macros use xmallocz to avoid size arithmetic convert trivial cases to ALLOC_ARRAY convert manual allocations to argv_array argv-array: add detach function add helpers for allocating flex-array structs harden REALLOC_ARRAY and xcalloc against size_t overflow tree-diff: catch integer overflow in combine_diff_path allocation ...
2016-02-22use st_add and st_mult for allocation size computationLibravatar Jeff King1-1/+1
If our size computation overflows size_t, we may allocate a much smaller buffer than we expected and overflow it. It's probably impossible to trigger an overflow in most of these sites in practice, but it is easy enough convert their additions and multiplications into overflow-checking variants. This may be fixing real bugs, and it makes auditing the code easier. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22convert trivial cases to ALLOC_ARRAYLibravatar Jeff King1-1/+1
Each of these cases can be converted to use ALLOC_ARRAY or REALLOC_ARRAY, which has two advantages: 1. It automatically checks the array-size multiplication for overflow. 2. It always uses sizeof(*array) for the element-size, so that it can never go out of sync with the declared type of the array. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-03Merge branch 'jk/ref-cache-non-repository-optim'Libravatar Junio C Hamano1-25/+1
The underlying machinery used by "ls-files -o" and other commands have been taught not to create empty submodule ref cache for a directory that is not a submodule. This removes a ton of wasted CPU cycles. * jk/ref-cache-non-repository-optim: resolve_gitlink_ref: ignore non-repository paths clean: make is_git_repository a public function
2016-01-25clean: make is_git_repository a public functionLibravatar Jeff King1-25/+1
We have always had is_git_directory(), for looking at a specific directory to see if it contains a git repo. In 0179ca7 (clean: improve performance when removing lots of directories, 2015-06-15), we added is_git_repository() which checks for a non-bare repository by looking at its ".git" entry. However, the fix in 0179ca7 needs to be applied other places, too. Let's make this new helper globally available. We need to give it a better name, though, to avoid confusion with is_git_directory(). This patch does that, documents both functions with a comment to reduce confusion, and removes the clean-specific references in the comments. Based-on-a-patch-by: Andreas Krey <a.krey@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-15strbuf: introduce strbuf_getline_{lf,nul}()Libravatar Junio C Hamano1-3/+3
The strbuf_getline() interface allows a byte other than LF or NUL as the line terminator, but this is only because I wrote these codepaths anticipating that there might be a value other than NUL and LF that could be useful when I introduced line_termination long time ago. No useful caller that uses other value has emerged. By now, it is clear that the interface is overly broad without a good reason. Many codepaths have hardcoded preference to read either LF terminated or NUL terminated records from their input, and then call strbuf_getline() with LF or NUL as the third parameter. This step introduces two thin wrappers around strbuf_getline(), namely, strbuf_getline_lf() and strbuf_getline_nul(), and mechanically rewrites these call sites to call either one of them. The changes contained in this patch are: * introduction of these two functions in strbuf.[ch] * mechanical conversion of all callers to strbuf_getline() with either '\n' or '\0' as the third parameter to instead call the respective thin wrapper. After this step, output from "git grep 'strbuf_getline('" would become a lot smaller. An interim goal of this series is to make this an empty set, so that we can have strbuf_getline_crlf() take over the shorter name strbuf_getline(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-05use strbuf_complete to conditionally append slashLibravatar Jeff King1-4/+2
When working with paths in strbufs, we frequently want to ensure that a directory contains a trailing slash before appending to it. We can shorten this code (and make the intent more obvious) by calling strbuf_complete. Most of these cases are trivially identical conversions, but there are two things to note: - in a few cases we did not check that the strbuf is non-empty (which would lead to an out-of-bounds memory access). These were generally not triggerable in practice, either from earlier assertions, or typically because we would have just fed the strbuf to opendir(), which would choke on an empty path. - in a few cases we indexed the buffer with "original_len" or similar, rather than the current sb->len, and it is not immediately obvious from the diff that they are the same. In all of these cases, I manually verified that the strbuf does not change between the assignment and the strbuf_complete call. This does not convert cases which look like: if (sb->len && !is_dir_sep(sb->buf[sb->len - 1])) strbuf_addch(sb, '/'); as those are obviously semantically different. Some of these cases arguably should be doing that, but that is out of scope for this change, which aims purely for cleanup with no behavior change (and at least it will make such sites easier to find and examine in the future, as we can grep for strbuf_complete). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15clean: improve performance when removing lots of directoriesLibravatar Erik Elfström1-4/+26
"git clean" uses resolve_gitlink_ref() to check for the presence of nested git repositories, but it has the drawback of creating a ref_cache entry for every directory that should potentially be cleaned. The linear search through the ref_cache list causes a massive performance hit for large number of directories. Modify clean.c:remove_dirs to use setup.c:is_git_directory and setup.c:read_gitfile_gently instead. Both these functions will open files and parse contents when they find something that looks like a git repository. This is ok from a performance standpoint since finding repository candidates should be comparatively rare. Using is_git_directory and read_gitfile_gently should give a more standardized check for what is and what isn't a git repository but also gives three behavioral changes. The first change is that we will now detect and avoid cleaning empty nested git repositories (only init run). This is desirable. Second, we will no longer die when cleaning a file named ".git" with garbage content (it will be cleaned instead). This is also desirable. The last change is that we will detect and avoid cleaning empty bare repositories that have been placed in a directory named ".git". This is not desirable but should have no real user impact since we already fail to clean non-empty bare repositories in the same scenario. This is thus deemed acceptable. On top of this we add some extra precautions. If read_gitfile_gently fails to open the git file, read the git file or verify the path in the git file we assume that the path with the git file is a valid repository and avoid cleaning. Update t7300 to reflect these changes in behavior. The time to clean an untracked directory containing 100000 sub directories went from 61s to 1.7s after this change. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-01Merge branch 'rs/janitorial'Libravatar Junio C Hamano1-2/+0
Code clean-up. * rs/janitorial: dir: remove unused variable sb clean: remove unused variable buf use file_exists() to check if a file exists in the worktree
2015-06-01Merge branch 'dt/clean-pathspec-filter-then-lstat'Libravatar Junio C Hamano1-3/+3
"git clean pathspec..." tried to lstat(2) and complain even for paths outside the given pathspec. * dt/clean-pathspec-filter-then-lstat: clean: only lstat files in pathspec
2015-05-20clean: remove unused variable bufLibravatar René Scharfe1-2/+0
It had never been used. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-18clean: only lstat files in pathspecLibravatar David Turner1-3/+3
Even though "git clean" takes pathspec to limit the part of the working tree to be cleaned, it checked the paths it encounters during its directory traversal with lstat(2), before checking if the path is within the pathspec. Ignore paths outside pathspec and proceed without checking with lstat(2). Even if such a path is unreadable due to e.g. EPERM, "git clean" should not care. Signed-off-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-06Merge branch 'ja/clean-confirm-i18n'Libravatar Junio C Hamano1-1/+2
The prompt string "remove?" used when "git clean -i" asks the user if a path should be removed was localizable, but the code always expects a substring of "yes" to tell it to go ahead. Always show [y/N] as part of this prompt to hint that the answer is not (yet) localized. * ja/clean-confirm-i18n: Add hint interactive cleaning
2015-03-02Add hint interactive cleaningLibravatar Jean-Noel Avila1-1/+2
For translators, specify that a [y/N] reply is needed. Also capitalize the first word in the prompt, as all the other interactive prompts from this command are capitalized. Signed-off-by: Jean-Noel Avila <jn.avila@free.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-22clean: typofixLibravatar Alexander Kuleshov1-1/+1
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-20Merge branch 'jn/parse-config-slot'Libravatar Junio C Hamano1-2/+1
Code cleanup. * jn/parse-config-slot: color_parse: do not mention variable name in error message pass config slots as pointers instead of offsets
2014-10-14color_parse: do not mention variable name in error messageLibravatar Jeff King1-2/+1
Originally the color-parsing function was used only for config variables. It made sense to pass the variable name so that the die() message could be something like: $ git -c color.branch.plain=bogus branch fatal: bad color value 'bogus' for variable 'color.branch.plain' These days we call it in other contexts, and the resulting error messages are a little confusing: $ git log --pretty='%C(bogus)' fatal: bad color value 'bogus' for variable '--pretty format' $ git config --get-color foo.bar bogus fatal: bad color value 'bogus' for variable 'command line' This patch teaches color_parse to complain only about the value, and then return an error code. Config callers can then propagate that up to the config parser, which mentions the variable name. Other callers can provide a custom message. After this patch these three cases now look like: $ git -c color.branch.plain=bogus branch error: invalid color value: bogus fatal: unable to parse 'color.branch.plain' from command-line config $ git log --pretty='%C(bogus)' error: invalid color value: bogus fatal: unable to parse --pretty format $ git config --get-color foo.bar bogus error: invalid color value: bogus fatal: unable to parse default color value Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-10-07use skip_prefix() to avoid more magic numbersLibravatar René Scharfe1-3/+4
Continue where ae021d87 (use skip_prefix to avoid magic numbers) left off and use skip_prefix() in more places for determining the lengths of prefix strings to avoid using dependent constants and other indirect methods. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-09Merge branch 'rs/clean-menu-item-defn'Libravatar Junio C Hamano1-1/+1
* rs/clean-menu-item-defn: clean: use f(void) instead of f() to declare a pointer to a function without arguments
2014-08-18clean: use f(void) instead of f() to declare a pointer to a function without ↵Libravatar René Scharfe1-1/+1
arguments Explicitly state that menu_item functions like clean_cmd don't take any arguments by using void instead of an empty parameter list. Found using gcc -Wstrict-prototypes. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-21use xcalloc() to allocate zero-initialized memoryLibravatar René Scharfe1-2/+1
Use xcalloc() instead of xmalloc() followed by memset() to allocate and zero out memory because it's shorter and avoids duplicating the function parameters. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-07-02Merge branch 'maint-1.8.5' into maintLibravatar Junio C Hamano1-1/+1
* maint-1.8.5: t7300: repair filesystem permissions with test_when_finished enums: remove trailing ',' after last item in enum
2014-07-02enums: remove trailing ',' after last item in enumLibravatar Ronnie Sahlberg1-1/+1
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-08Merge branch 'jl/nor-or-nand-and'Libravatar Junio C Hamano1-3/+3
Eradicate mistaken use of "nor" (that is, essentially "nor" used not in "neither A nor B" ;-)) from in-code comments, command output strings, and documentations. * jl/nor-or-nand-and: code and test: fix misuses of "nor" comments: fix misuses of "nor" contrib: fix misuses of "nor" Documentation: fix misuses of "nor"
2014-03-31code and test: fix misuses of "nor"Libravatar Justin Lebar1-3/+3
Signed-off-by: Justin Lebar <jlebar@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-18Merge branch 'jk/clean-d-pathspec' into maintLibravatar Junio C Hamano1-11/+9
"git clean -d pathspec" did not use the given pathspec correctly and ended up cleaning too much. * jk/clean-d-pathspec: clean: simplify dir/not-dir logic clean: respect pathspecs with "-d"
2014-03-18Merge branch 'jk/clean-d-pathspec'Libravatar Junio C Hamano1-11/+9
"git clean -d pathspec" did not use the given pathspec correctly and ended up cleaning too much. * jk/clean-d-pathspec: clean: simplify dir/not-dir logic clean: respect pathspecs with "-d"
2014-03-11clean: simplify dir/not-dir logicLibravatar Jeff King1-9/+6
When we get a list of paths from read_directory, we further prune it to create the final list of items to remove. The code paths for directories and non-directories repeat the same "add to list" code. This patch restructures the code so that we don't repeat ourselves. Also, by following a "if (condition) continue" pattern like the pathspec check above, it makes it more obvious that the conditional is about excluding directories under certain circumstances. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-11clean: respect pathspecs with "-d"Libravatar Jeff King1-2/+3
git-clean uses read_directory to fill in a `struct dir` with potential hits. However, read_directory does not actually check against our pathspec. It uses a simplified version that may turn up false positives. As a result, we need to check that any hits match our pathspec. We do so reliably for non-directories. For directories, if "-d" is not given we check that the pathspec matched exactly (i.e., we are even stricter, and require an explicit "git clean foo" to clean "foo/"). But if "-d" is given, rather than relaxing the exact match to allow a recursive match, we do not check the pathspec at all. This regression was introduced in 113f10f (Make git-clean a builtin, 2007-11-11). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-27Merge branch 'ep/varscope'Libravatar Junio C Hamano1-1/+2
Shrink lifetime of variables by moving their definitions to an inner scope where appropriate. * ep/varscope: builtin/gc.c: reduce scope of variables builtin/fetch.c: reduce scope of variable builtin/commit.c: reduce scope of variables builtin/clean.c: reduce scope of variable builtin/blame.c: reduce scope of variables builtin/apply.c: reduce scope of variables bisect.c: reduce scope of variable
2014-02-24clean: use cache_name_is_other()Libravatar Nguyễn Thái Ngọc Duy1-19/+2
cmd_clean() has the exact same code of index_name_is_other(). Reduce code duplication. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-24clean: replace match_pathspec() with dir_path_match()Libravatar Nguyễn Thái Ngọc Duy1-2/+1
This instance was left out when many match_pathspec() call sites that take input from dir_entry were converted to dir_path_match() because it passed a path with the trailing slash stripped out to match_pathspec() while the others did not. Stripping for all call sites back then would be a regression because match_pathspec() did not know how to match pathspec foo/ against _directory_ foo (the stripped version of path "foo/"). match_pathspec() knows how to do it now. And dir_path_match() strips the trailing slash also. Use the new function, because the stripping code is removed in the next patch. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-24pathspec: pass directory indicator to match_pathspec_item()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
This patch activates the DO_MATCH_DIRECTORY code in m_p_i(), which makes "git diff HEAD submodule/" and "git diff HEAD submodule" produce the same output. Previously only the version without trailing slash returns the difference (if any). That's the effect of new ce_path_match(). dir_path_match() is not executed by the new tests. And it should not introduce regressions. Previously if path "dir/" is passed in with pathspec "dir/", they obviously match. With new dir_path_match(), the path becomes _directory_ "dir" vs pathspec "dir/", which is not executed by the old code path in m_p_i(). The new code path is executed and produces the same result. The other case is pathspec "dir" and path "dir/" is now turned to "dir" (with DO_MATCH_DIRECTORY). Still the same result before or after the patch. So why change? Because of the next patch about clean.c. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-24pathspec: rename match_pathspec_depth() to match_pathspec()Libravatar Nguyễn Thái Ngọc Duy1-2/+2
A long time ago, for some reason I was not happy with match_pathspec(). I created a better version, match_pathspec_depth() that was suppose to replace match_pathspec() eventually. match_pathspec() has finally been gone since 6 months ago. Use the shorter name for match_pathspec_depth(). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-31builtin/clean.c: reduce scope of variableLibravatar Elia Pinto1-1/+2
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05replace {pre,suf}fixcmp() with {starts,ends}_with()Libravatar Christian Couder1-2/+2
Leaving only the function definitions and declarations so that any new topic in flight can still make use of the old functions, replace existing uses of the prefixcmp() and suffixcmp() with new API functions. The change can be recreated by mechanically applying this: $ git grep -l -e prefixcmp -e suffixcmp -- \*.c | grep -v strbuf\\.c | xargs perl -pi -e ' s|!prefixcmp\(|starts_with\(|g; s|prefixcmp\(|!starts_with\(|g; s|!suffixcmp\(|ends_with\(|g; s|suffixcmp\(|!ends_with\(|g; ' on the result of preparatory changes in this series. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09Merge branch 'jl/submodule-mv'Libravatar Junio C Hamano1-14/+10
"git mv A B" when moving a submodule A does "the right thing", inclusing relocating its working tree and adjusting the paths in the .gitmodules file. * jl/submodule-mv: (53 commits) rm: delete .gitmodules entry of submodules removed from the work tree mv: update the path entry in .gitmodules for moved submodules submodule.c: add .gitmodules staging helper functions mv: move submodules using a gitfile mv: move submodules together with their work trees rm: do not set a variable twice without intermediate reading. t6131 - skip tests if on case-insensitive file system parse_pathspec: accept :(icase)path syntax pathspec: support :(glob) syntax pathspec: make --literal-pathspecs disable pathspec magic pathspec: support :(literal) syntax for noglob pathspec kill limit_pathspec_to_literal() as it's only used by parse_pathspec() parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN parse_pathspec: make sure the prefix part is wildcard-free rename field "raw" to "_raw" in struct pathspec tree-diff: remove the use of pathspec's raw[] in follow-rename codepath remove match_pathspec() in favor of match_pathspec_depth() remove init_pathspec() in favor of parse_pathspec() remove diff_tree_{setup,release}_paths convert common_prefix() to use struct pathspec ...
2013-09-04Merge branch 'sb/parseopt-boolean-removal'Libravatar Junio C Hamano1-3/+3
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary. * sb/parseopt-boolean-removal: revert: use the OPT_CMDMODE for parsing, reducing code checkout-index: fix negations of even numbers of -n config parsing options: allow one flag multiple times hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP branch, commit, name-rev: ease up boolean conditions checkout: remove superfluous local variable log, format-patch: parsing uses OPT__QUIET Replace deprecated OPT_BOOLEAN by OPT_BOOL Remove deprecated OPTION_BOOLEAN for parsing arguments