| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
In c45f0f525d (switch: reject if some operation is in progress,
2019-03-29), a check is added to prevent switching when some operation
is in progress. The reason is it's often not safe to do so.
This is true for merge, am, rebase, cherry-pick and revert, but not so
much for bisect because bisecting is basically jumping/switching between
a bunch of commits to pin point the first bad one. git-bisect suggests
the next commit to test, but it's not wrong for the user to test a
different commit because git-bisect cannot have the knowledge to know
better.
For this reason, allow to switch when bisecting (*). I considered if we
should still prevent switching by default and allow it with
--ignore-in-progress. But I don't think the prevention really adds
anything much.
If the user switches away by mistake, since we print the previous HEAD
value, even if they don't know about the "-" shortcut, switching back is
still possible.
The warning will be printed on every switch while bisect is still
ongoing, not the first time you switch away from bisect's suggested
commit, so it could become a bit annoying.
(*) of course when it's safe to do so, i.e. no loss of local changes and
stuff.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-restore is different from git-checkout that it only restores the
worktree by default, not both worktree and index. add--interactive
needs some update to support this mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a more specific option name to express its purpose. --force may come
back as an alias of --ignore-unmerged and possibly more. But since this
is a destructive operation, I don't see why we need to "force" anything
more. We already don't hold back.
When 'checkout --force' or 'restore --ignore-unmerged' is used, we may
also print warnings about unmerged entries being ignore. Since this is
not exactly warning (people tell us to do so), more informational, let
it be suppressed if --quiet is given. This is a behavior change for
git-checkout.
PS. The diff looks a bit iffy since --force is moved to
add_common_switch_branch_options() (i.e. for switching). But
git-checkout is also doing switching and inherits this --force.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore --staged" without --source does not make much sense since
by default we restore from the index. Instead of copying the index to
itself, set the default source to HEAD in this case, yielding behavior
that matches "git reset -- <paths>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-checkout rejects plenty of invalid option combinations. Since
git-checkout is equivalent of either
git restore --source --staged --worktree
or
git restore --worktree
that still leaves the new mode 'git restore --index' unprotected. Reject
some more invalid option combinations.
The other new mode 'restore --source --worktree' does not need anything
else.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git checkout <tree-ish> <pathspec>' updates both index and
worktree. But updating the index when you want to restore worktree
files is non-intuitive. The index contains the data ready for the next
commit, and there's no indication that the user will want to commit
the restored versions.
'git restore' therefore by default only touches worktree. The user has
the option to update either the index with
git restore --staged --source=<tree> <path> (1)
or update both with
git restore --staged --worktree --source=<tree> <path> (2)
PS. Orignally I wanted to make worktree update default and form (1)
would add index update while also updating the worktree, and the user
would need to do "--staged --no-worktree" to update index only. But it
looks really confusing that "--staged" option alone updates both. So
now form (2) is used for both, which reads much more obvious.
PPS. Yes form (1) overlaps with "git reset <rev> <path>". I don't know
if we can ever turn "git reset" back to "_always_ reset HEAD and
optionally do something else".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Overlay mode is considered confusing when the command is about
restoring files on worktree. Disable it by default. The user can still
turn it on, or use 'git checkout' which still has overlay mode on by
default.
While at it, make the check in checkout_branch() stricter. Neither
--overlay or --no-overlay should be accepted in branch switching mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore" without arguments does not make much sense when
it's about restoring files (what files now?). We could default to
either
git restore .
or
git restore :/
Neither is intuitive. Make the user always give pathspec, force the
user to think the scope of restore they want because this is a
destructive operation.
"git restore -p" without pathspec is an exception to this
because it really is a separate mode. It will be treated as running
patch mode on the whole worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another departure from 'git checkout' syntax, which uses -- to
separate ref and pathspec. The observation is restore (or "git
checkout -- <pathspec>") is most often used to restore some files from
the index. If this is correct, we can simplify it by taking away the
ref, so that we can write
git restore some-file
without worrying about some-file being a ref and whether we need to do
git restore -- some-file
for safety. If the source of the restore comes from a tree, it will be
in the form of an option with value, e.g.
git restore --source=this-tree some-file
This is of course longer to type than using "--". But hopefully it
will not be used as often, and it is clearly easier to understand.
dwim_new_local_branch is no longer set (or unset) in cmd_restore_files()
because it's irrelevant because we don't really care about dwim-ing.
With accept_ref being unset, dwim can't happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout -m <other>" was about carrying the differences
between HEAD and the working-tree files forward while checking out
another branch, and ignored the differences between HEAD and the
index. The command has been taught to abort when the index and the
HEAD are different.
* nd/checkout-m:
checkout: prevent losing staged changes with --merge
read-tree: add --quiet
unpack-trees: rename "gently" flag to "quiet"
unpack-trees: keep gently check inside add_rejected_path
|
|
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
|
|
Doc about the above.
* nd/checkout-m-doc-update:
checkout.txt: note about losing staged changes with --merge
|
|
Switching and creating branches always involves knowing the
<start-point> to begin the new branch from. Sometimes, people want to
create a new branch that does not have any commits yet; --orphan is a
flag to allow that.
--orphan overrides the default of HEAD for <start-point> instead causing
us to start from an empty history with all tracked files removed from
the index and working tree. The use of --orphan is incompatible with
specifying a <start-point>.
A note on the implementation. An alternative is just create a dummy
commit in-core with empty tree and switch to it. But there's a chance
the commit's SHA-1 may end up somewhere permanent like reflog. It's best
to make sure "commit" pointer is NULL to avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless you know what you're doing, switching to another branch to do
something then switching back could be confusing. Worse, you may even
forget that you're in the middle of something. By the time you realize,
you may have done a ton of work and it gets harder to go back.
A new option --ignore-in-progress was considered but dropped because it
was not exactly clear what should happen. Sometimes you can switch away
and get back safely and resume the operation. Sometimes not. And the
git-checkout behavior is automatically clear merge/revert/cherry-pick,
which makes it a bit even more confusing [1].
We may revisit and add this option in the future. But for now play it
safe and not allow it (you can't even skip this check with --force). The
user is suggested to cancel the operation by themselves (and hopefully
they do consider the consequences, not blindly type the command), or to
create a separate worktree instead of switching. The third option is
the good old "git checkout", but it's not mentioned.
[1] CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we switch from one branch to another, it makes sense to show a
summary of local changes since there could be conflicts, or some files
left modified.... When switch is used solely for creating a new
branch (and "switch" to the same commit) or detaching, we don't really
need to show anything.
"git checkout" does it anyway for historical reasons. But we can start
with a clean slate with switch and don't have to.
This essentially reverts fa655d8411 (checkout: optimize "git checkout
-b <new_branch>" - 2018-08-16) and make it default for switch,
but also for -B and --detach. Users of big repos are encouraged to
move to switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is already the default in git-checkout. The real change in here is
just minor cleanup. The main excuse is to explain why dwim is kept default.
Contrary to detach mode that is easy to get into and confusing to get
back out. Automatically creating a tracking branch often does not kick
in as often (you would need a branch of the same name on a remote). And
since the branch creation is reported clearly, the user should be able
to undo/delete it if it's unwanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" automatically detaches branches and --detach is not
that useful (--no-detach is more likely). But for "switch", you
may want to use it more often once you're used to detached HEAD. This
of course adds -d to git-checkout but it does not harm (yet?) to do it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout <commit>" will checkout the commit in question and
detach HEAD from the current branch. It is naturally a right thing to
do once you get git references. But detached HEAD is a scary concept
to new users because we show a lot of warnings and stuff, and it could
be hard to get out of (until you know better).
To keep switch a bit more friendly to new users, we only allow
entering detached HEAD mode when --detach is given. "git
switch" must take a branch (unless you create a new branch,
then of course switch can take any commit-ish)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" can be executed without any arguments. What it does is
not exactly great: it switches from HEAD to HEAD and shows worktree
modification as a side effect.
Make switch reject this case. Just use "git status" if you want
that side effect. For switch, you have to either
- really switch a branch
- (explicitly) detach from the current branch
- create a new branch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is about switching branch (or creating a new one) and
should not accept pathspec. This helps simplify ambiguation
handling. The other two ("git checkout" and "git restore") of
course do accept pathspec as before.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option is ancient. Nowadays reflog is enabled by default and
automatically created for new branches. Keep it in git-checkout only.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--discard-changes is a better name than --force for this option since
it's what really happens. --force is turned to an alias for
--discard-changes. But it's meant to be an alias for potentially more
force options in the future.
Side note. It's not obvious from the patch but --discard-changes also
affects submodules if --recurse-submodules is used. The knob to force
updating submodules is hidden behind unpack-trees.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shortcut of these options do not make much sense when used with
switch. And their descriptions are also tied to checkout. Move -b/-B
to cmd_checkout() and new -c/-C with the same functionality in
cmd_switch_branch()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a preparation step for introducing new commands that do parts
of what checkout does. There will be two new commands, one is about
switching branches, detaching HEAD... one about checking out
paths. These share the a subset of command line options. The rest of
command line options are separate.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These local variables are referenced by struct option[]. This struct
will soon be broken down, moved away and we can't rely on local
variables anymore. Move these two to struct checkout_opts in
preparation for that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"opts" will soon be moved out of cmd_checkout(). To keep changes in
that patch smaller, convert "opts" to a pointer and keep the real
thing behind "real_opts".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is in preparation for the new command restore, which also
needs to parse opts->source_tree but does not need all the
disambiguation logic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The include list becomes very long and frankly a bit unorganized. With
the exception of builtin.h, cache.h or git-compat-util.h which have to
come first, keep the rest sorted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --merge is specified, we may need to do a real merge (instead of
three-way tree unpacking), the steps are best seen in git-checkout.sh
version before it's removed:
# Match the index to the working tree, and do a three-way.
git diff-files --name-only | git update-index --remove --stdin &&
work=`git write-tree` &&
git read-tree $v --reset -u $new || exit
git merge-recursive $old -- $new $work
# Do not register the cleanly merged paths in the index yet.
# this is not a real merge before committing, but just carrying
# the working tree changes along.
unmerged=`git ls-files -u`
git read-tree $v --reset $new
case "$unmerged" in
'') ;;
*)
(
z40=0000000000000000000000000000000000000000
echo "$unmerged" |
sed -e 's/^[0-7]* [0-9a-f]* /'"0 $z40 /"
echo "$unmerged"
) | git update-index --index-info
;;
esac
Notice the last 'read-tree --reset' step. We restore worktree back to
'new' tree after worktree's messed up by merge-recursive. If there are
staged changes before this whole command sequence is executed, they
are lost because they are unlikely part of the 'new' tree to be
restored.
There is no easy way to fix this. Elijah may have something up his
sleeves [1], but until then, check if there are staged changes and
refuse to run and lose them. The user would need to do "git reset" to
continue in this case.
A note about the test update. 'checkout -m' in that test will fail
because a deletion is staged. This 'checkout -m' was previously needed
to verify quietness behavior of unpack-trees. But a different check
has been put in place in the last patch. We can safely drop
'checkout -m' now.
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gently flag was added in 17e4642667 (Add flag to make unpack_trees()
not print errors. - 2008-02-07) to suppress error messages. The name
"gently" does not quite express that. Granted, being quiet is gentle but
it could mean not performing some other actions. Rename the flag to
"quiet" to be more on point.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have staged changes in path A and perform 'checkout
--merge' (which could result in conflicts in a totally unrelated path
B), changes in A will be gone. Which is unexpected. We are supposed
to keep all changes, or kick and scream otherwise.
This is the result of how --merge is implemented, from the very first
day in 1be0659efc (checkout: merge local modifications while switching
branches., 2006-01-12):
1. a merge is done, unmerged entries are collected
2. a hard switch to a new branch is done, then unmerged entries added
back
There is no trivial fix for this. Going with 3-way merge one file at a
time loses rename detection. Going with 3-way merge by trees requires
teaching the algorithm to pick up staged changes. And even if we detect
staged changes with --merge and abort for safety, an option to continue
--merge is very weird. Such an option would keep worktree changes, but
drop staged changes.
Because the problem has been with us since the introduction of --merge
and everybody has been pretty happy (except Phillip, who found this
problem), I'll just take a note here to acknowledge it and wait for
merge wizards to come in and work their magic. There may be a way
forward [1].
[1] CABPp-BFoL_U=bzON4SEMaQSKU2TKwnOgNqjt5MUaOejTKGUJxw@mail.gmail.com
Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This hasn't been used since 17ddc66e70 (convert report_path_error to
take struct pathspec, 2013-07-14), as the names in the struct will have
already been prefixed when they were parsed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
|
|
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.
* tg/checkout-no-overlay:
revert "checkout: introduce checkout.overlayMode config"
checkout: introduce checkout.overlayMode config
checkout: introduce --{,no-}overlay option
checkout: factor out mark_cache_entry_for_checkout function
checkout: clarify comment
read-cache: add invalidate parameter to remove_marked_cache_entries
entry: support CE_WT_REMOVE flag in checkout_entry
entry: factor out unlink_entry function
move worktree tests to t24*
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
* nd/checkout-noisy-unmerge:
checkout: count and print -m paths separately
checkout: update count-checkouts messages
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
Since 0f086e6dca (checkout: print something when checking out paths -
2018-11-13), this command reports how many paths have been updated
from what source (either from a tree, or from the index). I forget
that there's a third source: when -m is used, the merge conflict is
re-created (granted, also from the index, but it's not a straight copy
from the index).
Count and report unmerged paths separately. There's a bit more update
to avoid reporting:
Recreated X merge conflicts
Updated 0 paths from the index
The second line is unnecessary. Though if there's no conflict
recreation, we still report
Updated 0 paths from the index
to make it clear we're not really doing anything.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 0f086e6dca [1] counts the number of files updated by "git
checkout -- <paths>" command and prints it. Later on 536ec1839d [2]
adds the ability to remove files in "git checkout -- <paths>". This is
still an update on worktree and should be reported to the user.
To prepare for such an update since that commit is on track to
'master' now, the messages are rephrased to avoid "checked out" which
does not imply file deletion.
[1] 0f086e6dca (checkout: print something when checking out paths -
2018-11-13)
[2] 536ec1839d (entry: support CE_WT_REMOVE flag in checkout_entry -
2018-12-20)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout -b <new> [HEAD]" to create a new branch from the
current commit and check it out ought to be a no-op in the index
and the working tree in normal cases, but there are corner cases
that do require updates to the index and the working tree. Running
it immediately after "git clone --no-checkout" is one of these
cases that an earlier optimization kicked in incorrectly, which has
been fixed.
* bp/checkout-new-branch-optim:
checkout: fix regression in checkout -b on intitial checkout
checkout: add test demonstrating regression with checkout -b on initial commit
|
|
This reverts 1495ff7da5 ("checkout: introduce checkout.overlayMode
config", 2019-01-08) and thus removes the checkout.overlayMode config
option.
The option was originally introduced to give users the option to make
the new no-overlay behaviour the default. However users may be using
'git checkout' in scripts, even though it is porcelain. Users setting
the option to false may actually end up accidentally breaking scripts.
With the introduction of a new subcommand that will make the behaviour
the default, the config option will not be needed anymore anyway.
Revert the commit and remove the config option, so we don't risk
breaking scripts.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing a 'checkout -b' do a full checkout including updating the working
tree when doing the initial checkout. As the new test involves an filesystem
access, do it later in the sequence to give chance to other cheaper tests to
leave early. This fixes the regression in behavior caused by fa655d8411
(checkout: optimize "git checkout -b <new_branch>", 2018-08-16).
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
|
Jean-Noël Avila
Junio C Hamano
Nguyễn Thái Ngọc Duy
Jeff King
Jeff Hostetler
Thomas Gummerer
Ben Peart