| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Provide commit metadata for checkout code paths that use unpack_trees
and friends. When we're checking out a commit, use the commit
information, but don't provide commit information if we're checking out
from the index, since there need not be any particular commit associated
with the index, and even if there is one, we can't know what it is.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have the codebase wired up to pass any additional metadata
to filters, let's collect the additional metadata that we'd like to
pass.
The two main places we pass this metadata are checkouts and archives.
In these two situations, reading HEAD isn't a valid option, since HEAD
isn't updated for checkouts until after the working tree is written and
archives can accept an arbitrary tree. In other situations, HEAD will
usually reflect the refname of the branch in current use.
We pass a smaller amount of data in other cases, such as git cat-file,
where we can really only logically know about the blob.
This commit updates only the parts of the checkout code where we don't
use unpack_trees. That function and callers of it will be handled in a
future commit.
In the archive code, we leak a small amount of memory, since nothing we
pass in the archiver argument structure is freed.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the future, we're going to want to use the branch info in
checkout_worktree, so let's pass the whole struct branch_info down, not
just the revision name. We hoist the definition of struct branch_info
so it's in scope.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* rs/strbuf-insertstr:
mailinfo: don't insert header prefix for handle_content_type()
strbuf: add and use strbuf_insertstr()
|
|
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout X" did not correctly fail when X is not a local
branch but could name more than one remote-tracking branches
(i.e. to be dwimmed as the starting point to create a corresponding
local branch), which has been corrected.
* am/checkout-file-and-ref-ref-ambiguity:
checkout: don't revert file on ambiguous tracking branches
parse_branchname_arg(): extract part as new function
|
|
"git restore --staged" did not correctly update the cache-tree
structure, resulting in bogus trees to be written afterwards, which
has been corrected.
* nd/switch-and-restore:
restore: invalidate cache-tree when removing entries with --staged
|
|
When "git restore --staged <path>" removes a path that's in the index,
it marks the entry with CE_REMOVE, but we don't do anything to
invalidate the cache-tree. In the non-staged case, we end up in
checkout_worktree(), which calls remove_marked_cache_entries(). That
actually drops the entries from the index, as well as invalidating the
cache-tree and untracked-cache.
But with --staged, we never call checkout_worktree(), and the CE_REMOVE
entries remain. Interestingly, they are dropped when we write out the
index, but that means the resulting index is inconsistent: its
cache-tree will not match the actual entries, and running "git commit"
immediately after will create the wrong tree.
We can solve this by calling remove_marked_cache_entries() ourselves
before writing out the index. Note that we can't just hoist it out of
checkout_worktree(); that function needs to iterate over the CE_REMOVE
entries (to drop their matching worktree files) before removing them.
One curiosity about the test: without this patch, it actually triggers a
BUG() when running git-restore:
BUG: cache-tree.c:810: new1 with flags 0x4420000 should not be in cache-tree
But in the original problem report, which used a similar recipe,
git-restore actually creates the bogus index (and the commit is created
with the wrong tree). I'm not sure why the test here behaves differently
than my out-of-suite reproduction, but what's here should catch either
symptom (and the fix corrects both cases).
Reported-by: Torsten Krah <krah.tm@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For easier understanding, here are the existing good scenarios:
1) Have *no* file 'foo', *no* local branch 'foo' and a *single*
remote branch 'foo'
2) `git checkout foo` will create local branch foo, see [1]
and
1) Have *a* file 'foo', *no* local branch 'foo' and a *single*
remote branch 'foo'
2) `git checkout foo` will complain, see [3]
This patch prevents the following scenario:
1) Have *a* file 'foo', *no* local branch 'foo' and *multiple*
remote branches 'foo'
2) `git checkout foo` will successfully... revert contents of
file `foo`!
That is, adding another remote suddenly changes behavior significantly,
which is a surprise at best and could go unnoticed by user at worst.
Please see [3] which gives some real world complaints.
To my understanding, fix in [3] overlooked the case of multiple remotes,
and the whole behavior of falling back to reverting file was never
intended:
[1] introduces the unexpected behavior. Before, there was fallback
from not-a-ref to pathspec. This is reasonable fallback. After, there
is another fallback from ambiguous-remote to pathspec. I understand
that it was a copy&paste oversight.
[2] noticed the unexpected behavior but chose to semi-document it
instead of forbidding, because the goal of the patch series was
focused on something else.
[3] adds `die()` when there is ambiguity between branch and file. The
case of multiple tracking branches is seemingly overlooked.
The new behavior: if there is no local branch and multiple remote
candidates, just die() and don't try reverting file whether it
exists (prevents surprise) or not (improves error message).
[1] Commit 70c9ac2f ("DWIM "git checkout frotz" to "git checkout -b frotz origin/frotz"" 2009-10-18)
https://public-inbox.org/git/7vaazpxha4.fsf_-_@alter.siamese.dyndns.org/
[2] Commit ad8d5104 ("checkout: add advice for ambiguous "checkout <branch>"", 2018-06-05)
https://public-inbox.org/git/20180502105452.17583-1-avarab@gmail.com/
[3] Commit be4908f1 ("checkout: disambiguate dwim tracking branches and local files", 2018-11-13)
https://public-inbox.org/git/20181110120707.25846-1-pclouds@gmail.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is done for the next commit to avoid crazy 7x tab code padding.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected.
2) It is not allowed to pass pathspec in both args and file.
`you must specify path(s) to restore` block was moved down to be able to
test for `pathspec.nr` instead, because testing for `argc` is no longer
correct.
`git switch` does not support the new options because it doesn't expect
`<pathspec>` arguments.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
|
|
Resurrect a performance hack.
* nd/switch-and-restore:
checkout: add simple check for 'git checkout -b'
|
|
Fix a mismerge that happened in 2.22 timeframe.
* en/checkout-mismerge-fix:
checkout: remove duplicate code
|
|
The 'git switch' command was created to separate half of the
behavior of 'git checkout'. It specifically has the mode to
do nothing with the index and working directory if the user
only specifies to create a new branch and change HEAD to that
branch. This is also the behavior most users expect from
'git checkout -b', but for historical reasons it also performs
an index update by scanning the working directory. This can be
slow for even moderately-sized repos.
A performance fix for 'git checkout -b' was introduced by
fa655d8411 (checkout: optimize "git checkout -b <new_branch>"
2018-08-16). That change includes details about the config
setting checkout.optimizeNewBranch when the sparse-checkout
feature is required. The way this change detected if this
behavior change is safe was through the skip_merge_working_tree()
method. This method was complex and needed to be updated
as new options were introduced.
This behavior was essentially reverted by 65f099b ("switch:
no worktree status unless real branch switch happens"
2019-03-29). Instead, two members of the checkout_opts struct
were used to distinguish between 'git checkout' and 'git switch':
* switch_branch_doing_nothing_is_ok
* only_merge_on_switching_branches
These settings have opposite values depending on if we start
in cmd_checkout or cmd_switch.
The message for 64f099b includes "Users of big repos are
encouraged to move to switch." Making this change while
'git switch' is still experimental is too aggressive.
Create a happy medium between these two options by making
'git checkout -b <branch>' behave just like 'git switch',
but only if we read exactly those arguments. This must
be done in cmd_checkout to avoid the arguments being
consumed by the option parsing logic.
This differs from the previous change by fa644d8 in that
the config option checkout.optimizeNewBranch remains
deleted. This means that 'git checkout -b' will ignore
the index merge even if we have a sparse-checkout file.
While this is a behavior change for 'git checkout -b',
it matches the behavior of 'git switch -c'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Acked-by: Elijah Newren <newren@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" and "git restore" to re-populate the index from a
tree-ish (typically HEAD) did not work correctly for a path that
was removed and then added again with the intent-to-add bit, when
the corresponding working tree file was empty. This has been
corrected.
* vn/restore-empty-ita-corner-case-fix:
restore: add test for deleted ita files
checkout.c: unstage empty deleted ita files
|
|
write_tree_from_memory() appeared to be a merge-recursive special that
basically duplicated write_index_as_tree(). The two have a different
signature, but the bigger difference was just that write_index_as_tree()
would always unconditionally read the index off of disk instead of
working on the current in-memory index. So:
* split out common code into write_index_as_tree_internal()
* rename write_tree_from_memory() to write_inmemory_index_as_tree(),
make it call write_index_as_tree_internal(), and move it to
cache-tree.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge_trees() took a results parameter that would only be written when
opt->call_depth was positive, which is never the case now that
merge_trees_internal() has been split from merge_trees(). Remove the
misleading and unused parameter from merge_trees().
While at it, add some comments explaining how the output of
merge_trees() and merge_recursive() differ.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running 'git checkout -m' and using diff3 style conflict markers,
we want all the conflict hunks (left-side, "common" or "merge base", and
right-side) to have label markers letting the user know where each came
from. The "common" hunk label (o.ancestor) came from
old_branch_info->name, but that is NULL when HEAD is detached, which
resulted in a blank label. Check for that case and provide an
abbreviated commit hash instead.
(Incidentally, this was the only case in the git codebase where
merge_trees() was called with opt->ancestor being NULL. A subsequent
commit will prevent similar problems by enforcing that merge_trees()
always be called with opt->ancestor != NULL.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both commit a7256debd4b6 ("checkout.txt: note about losing staged
changes with --merge", 2019-03-19) from nd/checkout-m-doc-update and
commit 6eff409e8a76 ("checkout: prevent losing staged changes with
--merge", 2019-03-22) from nd/checkout-m were included in git.git
despite the fact that the latter was meant to be v2 of the former.
The merge of these two topics resulted in a redundant chunk of code;
remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is possible to delete a committed file from the index and then add it
as intent-to-add. After `git checkout HEAD <pathspec>`, the file should
be identical in the index and HEAD. The command already works correctly
if the file has contents in HEAD. This patch provides the desired
behavior even when the file is empty in HEAD.
`git checkout HEAD <pathspec>` calls tree.c:read_tree_1(), with fn
pointing to checkout.c:update_some(). update_some() creates a new cache
entry but discards it when its mode and oid match those of the old
entry. A cache entry for an ita file and a cache entry for an empty file
have the same oid. Therefore, an empty deleted ita file previously
passed both of these checks, and the new entry was discarded, so the
file remained unchanged in the index. After this fix, if the file is
marked as ita in the cache, then we avoid discarding the new entry and
add the new entry to the cache instead.
This change should not affect newly added ita files. For those, inside
tree.c:read_tree_1(), tree_entry_interesting() returns
entry_not_interesting, so fn is never called.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Varun Naik <vcnaik94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
In c45f0f525d (switch: reject if some operation is in progress,
2019-03-29), a check is added to prevent switching when some operation
is in progress. The reason is it's often not safe to do so.
This is true for merge, am, rebase, cherry-pick and revert, but not so
much for bisect because bisecting is basically jumping/switching between
a bunch of commits to pin point the first bad one. git-bisect suggests
the next commit to test, but it's not wrong for the user to test a
different commit because git-bisect cannot have the knowledge to know
better.
For this reason, allow to switch when bisecting (*). I considered if we
should still prevent switching by default and allow it with
--ignore-in-progress. But I don't think the prevention really adds
anything much.
If the user switches away by mistake, since we print the previous HEAD
value, even if they don't know about the "-" shortcut, switching back is
still possible.
The warning will be printed on every switch while bisect is still
ongoing, not the first time you switch away from bisect's suggested
commit, so it could become a bit annoying.
(*) of course when it's safe to do so, i.e. no loss of local changes and
stuff.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-restore is different from git-checkout that it only restores the
worktree by default, not both worktree and index. add--interactive
needs some update to support this mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a more specific option name to express its purpose. --force may come
back as an alias of --ignore-unmerged and possibly more. But since this
is a destructive operation, I don't see why we need to "force" anything
more. We already don't hold back.
When 'checkout --force' or 'restore --ignore-unmerged' is used, we may
also print warnings about unmerged entries being ignore. Since this is
not exactly warning (people tell us to do so), more informational, let
it be suppressed if --quiet is given. This is a behavior change for
git-checkout.
PS. The diff looks a bit iffy since --force is moved to
add_common_switch_branch_options() (i.e. for switching). But
git-checkout is also doing switching and inherits this --force.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore --staged" without --source does not make much sense since
by default we restore from the index. Instead of copying the index to
itself, set the default source to HEAD in this case, yielding behavior
that matches "git reset -- <paths>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-checkout rejects plenty of invalid option combinations. Since
git-checkout is equivalent of either
git restore --source --staged --worktree
or
git restore --worktree
that still leaves the new mode 'git restore --index' unprotected. Reject
some more invalid option combinations.
The other new mode 'restore --source --worktree' does not need anything
else.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git checkout <tree-ish> <pathspec>' updates both index and
worktree. But updating the index when you want to restore worktree
files is non-intuitive. The index contains the data ready for the next
commit, and there's no indication that the user will want to commit
the restored versions.
'git restore' therefore by default only touches worktree. The user has
the option to update either the index with
git restore --staged --source=<tree> <path> (1)
or update both with
git restore --staged --worktree --source=<tree> <path> (2)
PS. Orignally I wanted to make worktree update default and form (1)
would add index update while also updating the worktree, and the user
would need to do "--staged --no-worktree" to update index only. But it
looks really confusing that "--staged" option alone updates both. So
now form (2) is used for both, which reads much more obvious.
PPS. Yes form (1) overlaps with "git reset <rev> <path>". I don't know
if we can ever turn "git reset" back to "_always_ reset HEAD and
optionally do something else".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Overlay mode is considered confusing when the command is about
restoring files on worktree. Disable it by default. The user can still
turn it on, or use 'git checkout' which still has overlay mode on by
default.
While at it, make the check in checkout_branch() stricter. Neither
--overlay or --no-overlay should be accepted in branch switching mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git restore" without arguments does not make much sense when
it's about restoring files (what files now?). We could default to
either
git restore .
or
git restore :/
Neither is intuitive. Make the user always give pathspec, force the
user to think the scope of restore they want because this is a
destructive operation.
"git restore -p" without pathspec is an exception to this
because it really is a separate mode. It will be treated as running
patch mode on the whole worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another departure from 'git checkout' syntax, which uses -- to
separate ref and pathspec. The observation is restore (or "git
checkout -- <pathspec>") is most often used to restore some files from
the index. If this is correct, we can simplify it by taking away the
ref, so that we can write
git restore some-file
without worrying about some-file being a ref and whether we need to do
git restore -- some-file
for safety. If the source of the restore comes from a tree, it will be
in the form of an option with value, e.g.
git restore --source=this-tree some-file
This is of course longer to type than using "--". But hopefully it
will not be used as often, and it is clearly easier to understand.
dwim_new_local_branch is no longer set (or unset) in cmd_restore_files()
because it's irrelevant because we don't really care about dwim-ing.
With accept_ref being unset, dwim can't happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout -m <other>" was about carrying the differences
between HEAD and the working-tree files forward while checking out
another branch, and ignored the differences between HEAD and the
index. The command has been taught to abort when the index and the
HEAD are different.
* nd/checkout-m:
checkout: prevent losing staged changes with --merge
read-tree: add --quiet
unpack-trees: rename "gently" flag to "quiet"
unpack-trees: keep gently check inside add_rejected_path
|
|
Code cleanup.
* jk/unused-params-even-more:
parse_opt_ref_sorting: always use with NONEG flag
pretty: drop unused strbuf from parse_padding_placeholder()
pretty: drop unused "type" parameter in needs_rfc2047_encoding()
parse-options: drop unused ctx parameter from show_gitcomp()
fetch_pack(): drop unused parameters
report_path_error(): drop unused prefix parameter
unpack-trees: drop unused error_type parameters
unpack-trees: drop name_entry from traverse_by_cache_tree()
test-date: drop unused "now" parameter from parse_dates()
update-index: drop unused prefix_length parameter from do_reupdate()
log: drop unused "len" from show_tagger()
log: drop unused rev_info from early output
revision: drop some unused "revs" parameters
|
|
Doc about the above.
* nd/checkout-m-doc-update:
checkout.txt: note about losing staged changes with --merge
|
|
Switching and creating branches always involves knowing the
<start-point> to begin the new branch from. Sometimes, people want to
create a new branch that does not have any commits yet; --orphan is a
flag to allow that.
--orphan overrides the default of HEAD for <start-point> instead causing
us to start from an empty history with all tracked files removed from
the index and working tree. The use of --orphan is incompatible with
specifying a <start-point>.
A note on the implementation. An alternative is just create a dummy
commit in-core with empty tree and switch to it. But there's a chance
the commit's SHA-1 may end up somewhere permanent like reflog. It's best
to make sure "commit" pointer is NULL to avoid it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless you know what you're doing, switching to another branch to do
something then switching back could be confusing. Worse, you may even
forget that you're in the middle of something. By the time you realize,
you may have done a ton of work and it gets harder to go back.
A new option --ignore-in-progress was considered but dropped because it
was not exactly clear what should happen. Sometimes you can switch away
and get back safely and resume the operation. Sometimes not. And the
git-checkout behavior is automatically clear merge/revert/cherry-pick,
which makes it a bit even more confusing [1].
We may revisit and add this option in the future. But for now play it
safe and not allow it (you can't even skip this check with --force). The
user is suggested to cancel the operation by themselves (and hopefully
they do consider the consequences, not blindly type the command), or to
create a separate worktree instead of switching. The third option is
the good old "git checkout", but it's not mentioned.
[1] CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we switch from one branch to another, it makes sense to show a
summary of local changes since there could be conflicts, or some files
left modified.... When switch is used solely for creating a new
branch (and "switch" to the same commit) or detaching, we don't really
need to show anything.
"git checkout" does it anyway for historical reasons. But we can start
with a clean slate with switch and don't have to.
This essentially reverts fa655d8411 (checkout: optimize "git checkout
-b <new_branch>" - 2018-08-16) and make it default for switch,
but also for -B and --detach. Users of big repos are encouraged to
move to switch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is already the default in git-checkout. The real change in here is
just minor cleanup. The main excuse is to explain why dwim is kept default.
Contrary to detach mode that is easy to get into and confusing to get
back out. Automatically creating a tracking branch often does not kick
in as often (you would need a branch of the same name on a remote). And
since the branch creation is reported clearly, the user should be able
to undo/delete it if it's unwanted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" automatically detaches branches and --detach is not
that useful (--no-detach is more likely). But for "switch", you
may want to use it more often once you're used to detached HEAD. This
of course adds -d to git-checkout but it does not harm (yet?) to do it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout <commit>" will checkout the commit in question and
detach HEAD from the current branch. It is naturally a right thing to
do once you get git references. But detached HEAD is a scary concept
to new users because we show a lot of warnings and stuff, and it could
be hard to get out of (until you know better).
To keep switch a bit more friendly to new users, we only allow
entering detached HEAD mode when --detach is given. "git
switch" must take a branch (unless you create a new branch,
then of course switch can take any commit-ish)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" can be executed without any arguments. What it does is
not exactly great: it switches from HEAD to HEAD and shows worktree
modification as a side effect.
Make switch reject this case. Just use "git status" if you want
that side effect. For switch, you have to either
- really switch a branch
- (explicitly) detach from the current branch
- create a new branch
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This command is about switching branch (or creating a new one) and
should not accept pathspec. This helps simplify ambiguation
handling. The other two ("git checkout" and "git restore") of
course do accept pathspec as before.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option is ancient. Nowadays reflog is enabled by default and
automatically created for new branches. Keep it in git-checkout only.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--discard-changes is a better name than --force for this option since
it's what really happens. --force is turned to an alias for
--discard-changes. But it's meant to be an alias for potentially more
force options in the future.
Side note. It's not obvious from the patch but --discard-changes also
affects submodules if --recurse-submodules is used. The knob to force
updating submodules is hidden behind unpack-trees.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shortcut of these options do not make much sense when used with
switch. And their descriptions are also tied to checkout. Move -b/-B
to cmd_checkout() and new -c/-C with the same functionality in
cmd_switch_branch()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a preparation step for introducing new commands that do parts
of what checkout does. There will be two new commands, one is about
switching branches, detaching HEAD... one about checking out
paths. These share the a subset of command line options. The rest of
command line options are separate.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
brian m. carlson
Junio C Hamano
René Scharfe
Jeff King
Alexandr Miloslavskiy
Derrick Stolee
Elijah Newren
Jean-Noël Avila
Varun Naik
Nguyễn Thái Ngọc Duy