| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Simplify parse_pathspec() codepath and stop it from looking at the
default in-core index.
* bw/pathspec-sans-the-index:
pathspec: convert find_pathspecs_matching_against_index to take an index
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP
ls-files: prevent prune_cache from overeagerly pruning submodules
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag
submodule: add die_in_unpopulated_submodule function
pathspec: provide a more descriptive die message
|
|
Convert find_pathspecs_matching_against_index to take an index
parameter.
In addition mark pathspec.c with NO_THE_INDEX_COMPATIBILITY_MACROS now
that it doesn't use any cache macros or reference 'the_index'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since the stripping the trailing slash is no longer necessary, remove
the PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag. In addition, factor
out the logic which dies if a path decends into a submodule so that it
can still be used as a check after a pathspec struct has been
initialized.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common pattern in our code to read paths from stdin,
separated either by newlines or NULs, and unquote as
necessary. In each of these five cases we use "nbuf" to
temporarily store the unquoted value. Let's give it the more
meaningful name "unquoted", which makes it easier to
understand the purpose of the variable.
While we're at it, let's also static-initialize all of our
strbufs. It's not wrong to call strbuf_init, but it
increases the cognitive load on the reader, who might wonder
"do we sometimes avoid initializing them? why?".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The synopsys text and the usage string of subcommands that read list
of things from the standard input are often shown like this:
git gostak [--distim] < <list-of-doshes>
This is problematic in a number of ways:
* The way to use these commands is more often to feed them the
output from another command, not feed them from a file.
* Manual pages outside Git, commands that operate on the data read
from the standard input, e.g "sort", "grep", "sed", etc., are not
described with such a "< redirection-from-file" in their synopsys
text. Our doing so introduces inconsistency.
* We do not insist on where the output should go, by saying
git gostak [--distim] < <list-of-doshes> > <output>
* As it is our convention to enclose placeholders inside <braket>,
the redirection operator followed by a placeholder filename
becomes very hard to read, both in the documentation and in the
help text.
Let's clean them all up, after making sure that the documentation
clearly describes the modes that take information from the standard
input and what kind of things are expected on the input.
[jc: stole example for fmt-merge-msg from Jonathan]
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
|
|
check-ignore currently shows how .gitignore rules would treat untracked
paths. Tracked paths do not generate useful output. This prevents
debugging of why a path became tracked unexpectedly unless that path is
first removed from the index with `git rm --cached <path>`.
The option --no-index tells the command to bypass the check for the
path being in the index and hence allows tracked paths to be checked
too.
Whilst this behaviour deviates from the characteristics of `git add` and
`git status` its use case is unlikely to cause any user confusion.
Test scripts are augmented to check this option against the standard
ignores to ensure correct behaviour.
Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use
OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn
remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary.
* sb/parseopt-boolean-removal:
revert: use the OPT_CMDMODE for parsing, reducing code
checkout-index: fix negations of even numbers of -n
config parsing options: allow one flag multiple times
hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP
branch, commit, name-rev: ease up boolean conditions
checkout: remove superfluous local variable
log, format-patch: parsing uses OPT__QUIET
Replace deprecated OPT_BOOLEAN by OPT_BOOL
Remove deprecated OPTION_BOOLEAN for parsing arguments
|
|
"git check-ignore -z" applied the NUL termination to both its input
(with --stdin) and its output, but "git check-attr -z" ignored the
option on the output side.
This is potentially a backward incompatible fix. Let's see if
anybody screams before deciding if we want to do anything to help
existing users (there may be none).
* jc/check-x-z:
check-attr -z: a single -z should apply to both input and output
check-ignore -z: a single -z should apply to both input and output
check-attr: the name of the character is NUL, not NULL
check-ignore: the name of the character is NUL, not NULL
|
|
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless a command has separate --nul-terminated-{input,output}
options, the --nul-terminated-records (-z) option should apply
to both input and output for consistency. The caller knows that its
input paths may need to be protected for LF, and the program shows
these problematic paths to its output.
The code already did the right thing. Only the help text needs
fixing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enhance "check-ignore" (1.8.2 update) to work more like "check-attr"
over bidi-pipes.
* as/check-ignore:
t0008: use named pipe (FIFO) to test check-ignore streaming
Documentation: add caveats about I/O buffering for check-{attr,ignore}
check-ignore: allow incremental streaming of queries via --stdin
check-ignore: move setup into cmd_check_ignore()
check-ignore: add -n / --non-matching option
t0008: remove duplicated test fixture data
|
|
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers, such as the git-annex web assistant, find it useful to
invoke git check-ignore as a persistent background process, which can
then have queries fed to its STDIN at any point, and the corresponding
response consumed from its STDOUT. For this we need to invoke
check_ignore() once per line of standard input, and flush standard
output after each result.
The above use case suggests that empty STDIN is actually a reasonable
scenario (e.g. when the caller doesn't know in advance whether any
queries need to be fed to the background process until after it's
already started), so we make the minor behavioural change that "no
pathspec given." is no longer emitted in when STDIN is empty.
Even though check_ignore() could now be changed to operate on a single
pathspec, we keep it operating on an array of pathspecs since that is
a more convenient way of consuming the existing pathspec API.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Initialisation of the dir_struct and path_exclude_check structs was
previously done within check_ignore(). This was acceptable since
check_ignore() was only called once per check-ignore invocation;
however the next commit will convert it into an inner loop which is
called once per line of STDIN when --stdin is given. Therefore moving
the initialisation code out into cmd_check_ignore() ensures that
initialisation is still only performed once per check-ignore
invocation, and consequently that the output is identical whether
pathspecs are provided as CLI arguments or via STDIN.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `-n` or `--non-matching` are specified, non-matching pathnames will
also be output, in which case all fields in each output record except
for <pathname> will be empty. This can be useful when running
check-ignore as a background process, so that files can be
incrementally streamed to STDIN, and for each of these files, STDOUT
will indicate whether that file matched a pattern or not. (Without
this option, it would be impossible to tell whether the absence of
output for a given file meant that it didn't match any pattern, or
that the result simply hadn't been flushed to STDOUT yet.)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually we do not pass an empty string to the function hash_name()
because we almost always ask for hash values for a path that is a
candidate to be added to the index. However, check-ignore (and most
likely check-attr, but I didn't check) apparently has a callchain
to ask the hash value for an empty path when it was given a "." from
the top-level directory to ask "Is the path . excluded by default?"
Make sure that hash_name() does not overrun the end of the given
pathname even when it is empty.
Remove a sweep-the-issue-under-the-rug conditional in check-ignore
that avoided to pass an empty string to the callchain while at it.
It is a valid question to ask for check-ignore if the top-level is
set to be ignored by default, even though the answer is most likely
no, if only because there is currently no way to specify such an
entry in the .gitignore file. But it is an unusual thing to ask and
it is not worth optimizing for it by special casing at the top level
of the call chain.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This works in a similar manner to git-check-attr.
Thanks to Jeff King and Junio C Hamano for the idea:
http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Brandon Williams
Jeff King
Alex Henrie
Dave Williams
Stefan Beller
Nguyễn Thái Ngọc Duy
Karsten Blees
Adam Spiers