summaryrefslogtreecommitdiff
path: root/builtin/check-ignore.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16usage: do not insist that standard input must come from a fileLibravatar Junio C Hamano1-1/+1
The synopsys text and the usage string of subcommands that read list of things from the standard input are often shown like this: git gostak [--distim] < <list-of-doshes> This is problematic in a number of ways: * The way to use these commands is more often to feed them the output from another command, not feed them from a file. * Manual pages outside Git, commands that operate on the data read from the standard input, e.g "sort", "grep", "sed", etc., are not described with such a "< redirection-from-file" in their synopsys text. Our doing so introduces inconsistency. * We do not insist on where the output should go, by saying git gostak [--distim] < <list-of-doshes> > <output> * As it is our convention to enclose placeholders inside <braket>, the redirection operator followed by a placeholder filename becomes very hard to read, both in the documentation and in the help text. Let's clean them all up, after making sure that the documentation clearly describes the modes that take information from the standard input and what kind of things are expected on the input. [jc: stole example for fmt-merge-msg from Jonathan] Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-14standardize usage info string formatLibravatar Alex Henrie1-2/+2
This patch puts the usage info strings that were not already in docopt- like format into docopt-like format, which will be a litle easier for end users and a lot easier for translators. Changes include: - Placing angle brackets around fill-in-the-blank parameters - Putting dashes in multiword parameter names - Adding spaces to [-f|--foobar] to make [-f | --foobar] - Replacing <foobar>* with [<foobar>...] Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-20Merge branch 'dw/check-ignore-sans-index'Libravatar Junio C Hamano1-2/+4
"git check-ignore" follows the same rule as "git add" and "git status" in that the ignore/exclude mechanism does not take effect on paths that are already tracked. With "--no-index" option, it can be used to diagnose which paths that should have been ignored have been mistakenly added to the index. * dw/check-ignore-sans-index: check-ignore: Add option to ignore index contents
2013-09-12check-ignore: Add option to ignore index contentsLibravatar Dave Williams1-2/+4
check-ignore currently shows how .gitignore rules would treat untracked paths. Tracked paths do not generate useful output. This prevents debugging of why a path became tracked unexpectedly unless that path is first removed from the index with `git rm --cached <path>`. The option --no-index tells the command to bypass the check for the path being in the index and hence allows tracked paths to be checked too. Whilst this behaviour deviates from the characteristics of `git add` and `git status` its use case is unlikely to cause any user confusion. Test scripts are augmented to check this option against the standard ignores to ensure correct behaviour. Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-09Merge branch 'jl/submodule-mv'Libravatar Junio C Hamano1-13/+22
"git mv A B" when moving a submodule A does "the right thing", inclusing relocating its working tree and adjusting the paths in the .gitmodules file. * jl/submodule-mv: (53 commits) rm: delete .gitmodules entry of submodules removed from the work tree mv: update the path entry in .gitmodules for moved submodules submodule.c: add .gitmodules staging helper functions mv: move submodules using a gitfile mv: move submodules together with their work trees rm: do not set a variable twice without intermediate reading. t6131 - skip tests if on case-insensitive file system parse_pathspec: accept :(icase)path syntax pathspec: support :(glob) syntax pathspec: make --literal-pathspecs disable pathspec magic pathspec: support :(literal) syntax for noglob pathspec kill limit_pathspec_to_literal() as it's only used by parse_pathspec() parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN parse_pathspec: make sure the prefix part is wildcard-free rename field "raw" to "_raw" in struct pathspec tree-diff: remove the use of pathspec's raw[] in follow-rename codepath remove match_pathspec() in favor of match_pathspec_depth() remove init_pathspec() in favor of parse_pathspec() remove diff_tree_{setup,release}_paths convert common_prefix() to use struct pathspec ...
2013-09-04Merge branch 'sb/parseopt-boolean-removal'Libravatar Junio C Hamano1-6/+6
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary. * sb/parseopt-boolean-removal: revert: use the OPT_CMDMODE for parsing, reducing code checkout-index: fix negations of even numbers of -n config parsing options: allow one flag multiple times hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP branch, commit, name-rev: ease up boolean conditions checkout: remove superfluous local variable log, format-patch: parsing uses OPT__QUIET Replace deprecated OPT_BOOLEAN by OPT_BOOL Remove deprecated OPTION_BOOLEAN for parsing arguments
2013-09-04Merge branch 'jc/check-x-z'Libravatar Junio C Hamano1-6/+6
"git check-ignore -z" applied the NUL termination to both its input (with --stdin) and its output, but "git check-attr -z" ignored the option on the output side. This is potentially a backward incompatible fix. Let's see if anybody screams before deciding if we want to do anything to help existing users (there may be none). * jc/check-x-z: check-attr -z: a single -z should apply to both input and output check-ignore -z: a single -z should apply to both input and output check-attr: the name of the character is NUL, not NULL check-ignore: the name of the character is NUL, not NULL
2013-08-05Replace deprecated OPT_BOOLEAN by OPT_BOOLLibravatar Stefan Beller1-6/+6
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN, 2011-09-27). All occurrences of the respective variables have been reviewed and none of them relied on the counting up mechanism, but all of them were using the variable as a true boolean. This patch does not change semantics of any command intentionally. Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15remove match_pathspec() in favor of match_pathspec_depth()Libravatar Nguyễn Thái Ngọc Duy1-2/+2
match_pathspec_depth was created to replace match_pathspec (see 61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took more than two years, but the replacement finally happens :-) Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-15check-ignore: convert to use parse_pathspecLibravatar Nguyễn Thái Ngọc Duy1-13/+22
check-ignore (at least the test suite) seems to rely on the pattern order. PATHSPEC_KEEP_ORDER is introduced to explictly express this. The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the only flag that reorders pathspecs, but it's less obvious that way. Cc: Adam Spiers <git@adamspiers.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-11check-ignore -z: a single -z should apply to both input and outputLibravatar Junio C Hamano1-1/+1
Unless a command has separate --nul-terminated-{input,output} options, the --nul-terminated-records (-z) option should apply to both input and output for consistency. The caller knows that its input paths may need to be protected for LF, and the program shows these problematic paths to its output. The code already did the right thing. Only the help text needs fixing. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-11check-ignore: the name of the character is NUL, not NULLLibravatar Junio C Hamano1-6/+6
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-29Merge branch 'as/check-ignore'Libravatar Junio C Hamano1-42/+50
Enhance "check-ignore" (1.8.2 update) to work more like "check-attr" over bidi-pipes. * as/check-ignore: t0008: use named pipe (FIFO) to test check-ignore streaming Documentation: add caveats about I/O buffering for check-{attr,ignore} check-ignore: allow incremental streaming of queries via --stdin check-ignore: move setup into cmd_check_ignore() check-ignore: add -n / --non-matching option t0008: remove duplicated test fixture data
2013-04-15dir.c: git-status --ignored: don't scan the work tree twiceLibravatar Karsten Blees1-1/+0
'git-status --ignored' still scans the work tree twice to collect untracked and ignored files, respectively. fill_directory / read_directory already supports collecting untracked and ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED flag to enable this has some git-add specific side-effects (e.g. it doesn't recurse into ignored directories, so listing ignored files with --untracked=all doesn't work). The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored files in dir_struct.entries[] (instead of dir_struct.ignored[] as DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git. We don't want to break the existing API, so lets introduce a new flag DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar to DIR_COLLECT_FILES, but will recurse into sub-directories based on the other flags as DIR_SHOW_IGNORED does. In dir.c::read_directory_recursive, add ignored files to either dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move the DIR_COLLECT_IGNORED case here so that filling result lists is in a common place. In wt-status.c::wt_status_collect_untracked, use the new flag and read results from dir_struct.ignored[]. Remove the extra fill_directory call. builtin/check-ignore.c doesn't call fill_directory, setting the git-add specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity. Update API documentation to reflect the changes. Performance: with this patch, 'git-status --ignored' is typically as fast as 'git-status'. Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15dir.c: replace is_path_excluded with now equivalent is_excluded APILibravatar Karsten Blees1-5/+1
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-11check-ignore: allow incremental streaming of queries via --stdinLibravatar Adam Spiers1-10/+5
Some callers, such as the git-annex web assistant, find it useful to invoke git check-ignore as a persistent background process, which can then have queries fed to its STDIN at any point, and the corresponding response consumed from its STDOUT. For this we need to invoke check_ignore() once per line of standard input, and flush standard output after each result. The above use case suggests that empty STDIN is actually a reasonable scenario (e.g. when the caller doesn't know in advance whether any queries need to be fed to the background process until after it's already started), so we make the minor behavioural change that "no pathspec given." is no longer emitted in when STDIN is empty. Even though check_ignore() could now be changed to operate on a single pathspec, we keep it operating on an array of pathspecs since that is a more convenient way of consuming the existing pathspec API. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-11check-ignore: move setup into cmd_check_ignore()Libravatar Adam Spiers1-20/+21
Initialisation of the dir_struct and path_exclude_check structs was previously done within check_ignore(). This was acceptable since check_ignore() was only called once per check-ignore invocation; however the next commit will convert it into an inner loop which is called once per line of STDIN when --stdin is given. Therefore moving the initialisation code out into cmd_check_ignore() ensures that initialisation is still only performed once per check-ignore invocation, and consequently that the output is identical whether pathspecs are provided as CLI arguments or via STDIN. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-11check-ignore: add -n / --non-matching optionLibravatar Adam Spiers1-17/+29
If `-n` or `--non-matching` are specified, non-matching pathnames will also be output, in which case all fields in each output record except for <pathname> will be empty. This can be useful when running check-ignore as a background process, so that files can be incrementally streamed to STDIN, and for each of these files, STDOUT will indicate whether that file matched a pattern or not. (Without this option, it would be impossible to tell whether the absence of output for a given file meant that it didn't match any pattern, or that the result simply hadn't been flushed to STDOUT yet.) Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-19name-hash: allow hashing an empty stringLibravatar Junio C Hamano1-1/+1
Usually we do not pass an empty string to the function hash_name() because we almost always ask for hash values for a path that is a candidate to be added to the index. However, check-ignore (and most likely check-attr, but I didn't check) apparently has a callchain to ask the hash value for an empty path when it was given a "." from the top-level directory to ask "Is the path . excluded by default?" Make sure that hash_name() does not overrun the end of the given pathname even when it is empty. Remove a sweep-the-issue-under-the-rug conditional in check-ignore that avoided to pass an empty string to the callchain while at it. It is a valid question to ask for check-ignore if the top-level is set to be ignored by default, even though the answer is most likely no, if only because there is currently no way to specify such an entry in the .gitignore file. But it is an unusual thing to ask and it is not worth optimizing for it by special casing at the top level of the call chain. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06add git-check-ignore sub-commandLibravatar Adam Spiers1-0/+173
This works in a similar manner to git-check-attr. Thanks to Jeff King and Junio C Hamano for the idea: http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815 Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>