| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git blame -h' and 'git log -h' both show '-L <n,m>' and describe this
option as "Process only line range n,m, counting from 1". No hint is
given that a function name regex can also be used.
Use <range> instead, and expand the description of the option to mention
both modes. Remove "counting from 1" as it's uneeded; it's uncommon to
refer to the first line of a file as "line 0".
Also, for 'git log', improve the wording to better reflect the long help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame --ignore-rev/--ignore-revs-file" failed to validate
their input are valid revision, and failed to take into account
that the user may want to give an annotated tag instead of a
commit, which has been corrected.
* jc/blame-ignore-fix:
blame: validate and peel the object names on the ignore list
t8013: minimum preparatory clean-up
|
|
The command reads list of object names to place on the ignore list
either from the command line or from a file, but they are not
checked with their object type (those read from the file are not
even checked for object existence).
Extend the oidset_parse_file() API and allow it to take a callback
that can be used to die (e.g. when an inappropriate input is read)
or modify the object name read (e.g. when a tag pointing at a commit
is read, and the caller wants a commit object name), and use it in
the code that handles ignore list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are still a handful mentions of SHA-1 when we meant the
(hexadecimal) object names in end-user facing messages. Rewrite
them.
I was hoping that this can mostly be s/SHA-1/object name/, but
a few messages needed rephrasing to keep the result readable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* dl/opt-callback-cleanup:
Use OPT_CALLBACK and OPT_CALLBACK_F
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The changed-path Bloom filters help reduce the amount of tree
parsing required during history queries. Before calculating a
diff, we can ask the filter if a path changed between a commit
and its first parent. If the filter says "no" then we can move
on without parsing trees. If the filter says "maybe" then we
parse trees to discover if the answer is actually "yes" or "no".
When computing a blame, there is a section in find_origin() that
computes a diff between a commit and one of its parents. When this
is the first parent, we can check the Bloom filters before calling
diff_tree_oid().
In order to make this work with the blame machinery, we need to
initialize a struct bloom_key with the initial path. But also, we
need to add more keys to a list if a rename is detected. We then
check to see if _any_ of these keys answer "maybe" in the diff.
During development, I purposefully left out this "add a new key
when a rename is detected" to see if the test suite would catch
my error. That is how I discovered the issues with
GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS from the previous change.
With that change, we can feel some confidence in the coverage of
this change.
If a user requests copy detection using "git blame -C", then there
are more places where the set of "important" files can expand. I
do not know enough about how this happens in the blame machinery.
Thus, the Bloom filter integration is explicitly disabled in this
mode. A later change could expand the bloom_key data with an
appropriate call (or calls) to add_bloom_key().
If we did not disable this mode, then the following tests would
fail:
t8003-blame-corner-cases.sh
t8011-blame-split-file.sh
Generally, this is a performance enhancement and should not
change the behavior of 'git blame' in any way. If a repo has a
commit-graph file with computed changed-path Bloom filters, then
they should notice improved performance for their 'git blame'
commands.
Here are some example timings that I found by blaming some paths
in the Linux kernel repository:
git blame arch/x86/kernel/topology.c >/dev/null
Before: 0.83s
After: 0.24s
git blame kernel/time/time.c >/dev/null
Before: 0.72s
After: 0.24s
git blame tools/perf/ui/stdio/hist.c >/dev/null
Before: 0.27s
After: 0.11s
I specifically looked for "deep" paths that were also edited many
times. As a counterpoint, the MAINTAINERS file was edited many
times but is located in the root tree. This means that the cost of
computing a diff relative to the pathspec is very small. Here are
the timings for that command:
git blame MAINTAINERS >/dev/null
Before: 20.1s
After: 18.0s
These timings are the best of five. The worst-case runs were on the
order of 2.5 minutes for both cases. Note that the MAINTAINERS file
has 18,740 lines across 17,000+ commits. This happens to be one of
the cases where this change provides the least improvement.
The lack of improvement for the MAINTAINERS file and the relatively
modest improvement for the other examples can be easily explained.
The blame machinery needs to compute line-level diffs to determine
which lines were changed by each commit. That makes up a large
proportion of the computation time, and this change does not
attempt to improve on that section of the algorithm. The
MAINTAINERS file is large and changed often, so it takes time to
determine which lines were updated by which commit. In contrast,
the code files are much smaller, and it takes longer to comute
the line-by-line diff for a single patch on the Linux mailing
lists.
Outside of the "-C" integration, I believe there is little more to
gain from the changed-path Bloom filters for 'git blame' after this
patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message update.
* sg/blame-indent-heuristics-is-now-the-default:
builtin/blame.c: remove '--indent-heuristic' from usage string
|
|
Move the definition of a set of bitmask constants from 0ctal
literal to (1U<<count) notation.
* hv/bitshift-constants-in-blame:
builtin/blame.c: constants into bit shift format
|
|
The indent heuristic is our default diff heuristic since 33de716387
(diff: enable indent heuristic by default, 2017-05-08), but the usage
string of 'git blame' still mentions it as "experimental heuristic".
We could simply update the short help associated with the option, but
according to the comment above the option's declaration it was "only
included here to get included in the "-h" output". That made sense
while the feature was still experimental and we wanted to give it more
exposure, but nowadays it's unnecessary.
So let's rather remove the '--indent-heuristic' option from 'git
blame's usage string. Note that 'git blame' will still accept this
option, as it is parsed in parse_revision_opt().
Astute readers may notice that this patch removes a comment mentioning
"the following two options", but it only removes one option. The
reason is that the comment is outdated: that other options was
'--compaction-heuristic', and it has already been removed in
3cde4e02ee (diff: retire "compaction" heuristics, 2016-12-23), but
that commit forgot to update this comment.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are looking at bitfield constants, and elsewhere in the Git source
code, such cases are handled via bit shift operators rather than octal
numbers, which also makes it easier to spot holes in the range
(if, say, 1<<5 was missing, it is easier to spot it between 1<<4
and 1<<6 than it is to spot a missing 040 between a 020 and a 0100).
Signed-off-by: Hariom Verma <hariom18599@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/dedup-includes:
treewide: remove duplicate #include directives
|
|
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch several uses of GIT_SHA1_HEXSZ to the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame" learned to "ignore" commits in the history, whose
effects (as well as their presence) get ignored.
* br/blame-ignore:
t8014: remove unnecessary braces
blame: drop some unused function parameters
blame: add a test to cover blame_coalesce()
blame: use the fingerprint heuristic to match ignored lines
blame: add a fingerprint heuristic to match ignored lines
blame: optionally track line fingerprints during fill_blame_origin()
blame: add config options for the output of ignored or unblamable lines
blame: add the ability to ignore commits and their changes
blame: use a helper function in blame_chunk()
Move oidset_parse_file() to oidset.c
fsck: rename and touch up init_skiplist()
|
|
In MS Visual C, the `DEBUG` constant is set automatically whenever
compiling with debug information.
This is clearly not what was intended in `cache-tree.c` nor in
`builtin/blame.c`, so let's use a less ambiguous name there.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When ignoring commits, the commit that is blamed might not be
responsible for the change, due to the inaccuracy of our heuristic.
Users might want to know when a particular line has a potentially
inaccurate blame.
Furthermore, guess_line_blames() may fail to find any parent commit for
a given line touched by an ignored commit. Those 'unblamable' lines
remain blamed on an ignored commit. Users might want to know if a line
is unblamable so that they do not spend time investigating a commit they
know is uninteresting.
This patch adds two config options to mark these two types of lines in
the output of blame.
The first option can identify ignored lines by specifying
blame.markIgnoredLines. When this option is set, each blame line that
was blamed on a commit other than the ignored commit is marked with a
'?'.
For example:
278b6158d6fdb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
?278b6158d6fd (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
where the '?' is placed before the commit, and the hash has one fewer
characters.
Sometimes we are unable to even guess at what ancestor commit touched a
line. These lines are 'unblamable.' The second option,
blame.markUnblamableLines, will mark the line with '*'.
For example, say we ignore e5e8d36d04cbe, yet we are unable to blame
this line on another commit:
e5e8d36d04cbe (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
appears as:
*e5e8d36d04cb (Barret Rhoden 2016-04-11 13:57:54 -0400 26)
When these config options are used together, every line touched by an
ignored commit will be marked with either a '?' or a '*'.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits that make formatting changes or function renames are often not
interesting when blaming a file. A user may deem such a commit as 'not
interesting' and want to ignore and its changes it when assigning blame.
For example, say a file has the following git history / rev-list:
---O---A---X---B---C---D---Y---E---F
Commits X and Y both touch a particular line, and the other commits do
not:
X: "Take a third parameter"
-MyFunc(1, 2);
+MyFunc(1, 2, 3);
Y: "Remove camelcase"
-MyFunc(1, 2, 3);
+my_func(1, 2, 3);
git-blame will blame Y for the change. I'd like to be able to ignore Y:
both the existence of the commit as well as any changes it made. This
differs from -S rev-list, which specifies the list of commits to
process for the blame. We would still process Y, but just don't let the
blame 'stick.'
This patch adds the ability for users to ignore a revision with
--ignore-rev=rev, which may be repeated. They can specify a set of
files of full object names of revs, e.g. SHA-1 hashes, one per line. A
single file may be specified with the blame.ignoreRevFile config option
or with --ignore-rev-file=file. Both the config option and the command
line option may be repeated multiple times. An empty file name "" will
clear the list of revs from previously processed files. Config options
are processed before command line options.
For a typical use case, projects will maintain the file containing
revisions for commits that perform mass reformatting, and their users
have the option to ignore all of the commits in that file.
Additionally, a user can use the --ignore-rev option for one-off
investigation. To go back to the example above, X was a substantive
change to the function, but not the change the user is interested in.
The user inspected X, but wanted to find the previous change to that
line - perhaps a commit that introduced that function call.
To make this work, we can't simply remove all ignored commits from the
rev-list. We need to diff the changes introduced by Y so that we can
ignore them. We let the blames get passed to Y, just like when
processing normally. When Y is the target, we make sure that Y does not
*keep* any blames. Any changes that Y is responsible for get passed to
its parent. Note we make one pass through all of the scapegoats
(parents) to attempt to pass blame normally; we don't know if we *need*
to ignore the commit until we've checked all of the parents.
The blame_entry will get passed up the tree until we find a commit that
has a diff chunk that affects those lines.
One issue is that the ignored commit *did* make some change, and there is
no general solution to finding the line in the parent commit that
corresponds to a given line in the ignored commit. That makes it hard
to attribute a particular line within an ignored commit's diff
correctly.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) #include "a.h"
commit-b 12) #include "b.h"
Commit X, which we will ignore, swaps these lines:
commit-X 11) #include "b.h"
commit-X 12) #include "a.h"
We can pass that blame entry to the parent, but line 11 will be
attributed to commit A, even though "include b.h" came from commit B.
The blame mechanism will be looking at the parent's view of the file at
line number 11.
ignore_blame_entry() is set up to allow alternative algorithms for
guessing per-line blames. Any line that is not attributed to the parent
will continue to be blamed on the ignored commit as if that commit was
not ignored. Upcoming patches have the ability to detect these lines
and mark them in the blame output.
The existing algorithm is simple: blame each line on the corresponding
line in the parent's diff chunk. Any lines beyond that stay with the
target.
For example, the parent of an ignored commit has this, say at line 11:
commit-a 11) void new_func_1(void *x, void *y);
commit-b 12) void new_func_2(void *x, void *y);
commit-c 13) some_line_c
commit-d 14) some_line_d
After a commit 'X', we have:
commit-X 11) void new_func_1(void *x,
commit-X 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Commit X nets two additionally lines: 13 and 14. The current
guess_line_blames() algorithm will not attribute these to the parent,
whose diff chunk is only two lines - not four.
When we ignore with the current algorithm, we get:
commit-a 11) void new_func_1(void *x,
commit-b 12) void *y);
commit-X 13) void new_func_2(void *x,
commit-X 14) void *y);
commit-c 15) some_line_c
commit-d 16) some_line_d
Note that line 12 was blamed on B, though B was the commit for
new_func_2(), not new_func_1(). Even when guess_line_blames() finds a
line in the parent, it may still be incorrect.
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame -- path" in a non-bare repository starts blaming from
the working tree, and the same command in a bare repository errors
out because there is no working tree by definition. The command
has been taught to instead start blaming from the commit at HEAD,
which is more useful.
* sg/blame-in-bare-start-at-head:
blame: default to HEAD in a bare repo when no start commit is given
|
|
When 'git blame' is invoked without specifying the commit to start
blaming from, it starts from the given file's state in the work tree.
However, when invoked in a bare repository without a start commit,
then there is no work tree state to start from, and it dies with the
following error message:
$ git rev-parse --is-bare-repository
true
$ git blame file.c
fatal: this operation must be run in a work tree
This is misleading, because it implies that 'git blame' doesn't work
in bare repositories at all, but it does, in fact, work just fine when
it is given a commit to start from.
We could improve the error message, of course, but let's just default
to HEAD in a bare repository instead, as most likely that is what the
user wanted anyway (if they wanted to start from an other commit, then
they would have specified that in the first place).
'git annotate' is just a thin wrapper around 'git blame', so in the
same situation it printed the same misleading error message, and this
patch fixes it, too.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
|
|
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
|
|
Lowlevel callbacks have different function signatures. Add a new field
in 'struct option' with the right type for lowlevel callbacks.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds --date=human, which skips the timezone if it matches the
current time-zone, and doesn't print the whole date if that matches (ie
skip printing year for dates that are "this year", but also skip the
whole date itself if it's in the last few days and we can just say what
weekday it was).
For really recent dates (same day), use the relative date stamp, while
for old dates (year doesn't match), don't bother with time and timezone.
Also add 'auto' date mode, which defaults to human if we're using the
pager. So you can do
git config --add log.date auto
and your "git log" commands will show the human-legible format unless
you're scripting things.
Note that this time format still shows the timezone for recent enough
events (but not so recent that they show up as relative dates). You can
combine it with the "-local" suffix to never show timezones for an even
more simplified view.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability fix for a recent update to parse-options API.
* nd/show-gitcomp-compilation-fix:
parse-options: fix SunCC compiler warning
|
|
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we define a parse-options callback, the flags we put in the option
struct must match what the callback expects. For example, a callback
which does not handle the "unset" parameter should only be used with
PARSE_OPT_NONEG. But since the callback and the option struct are not
defined next to each other, it's easy to get this wrong (as earlier
patches in this series show).
Fortunately, the compiler can help us here: compiling with
-Wunused-parameters can show us which callbacks ignore their "unset"
parameters (and likewise, ones that ignore "arg" expect to be triggered
with PARSE_OPT_NOARG).
But after we've inspected a callback and determined that all of its
callers use the right flags, what do we do next? We'd like to silence
the compiler warning, but do so in a way that will catch any wrong calls
in the future.
We can do that by actually checking those variables and asserting that
they match our expectations. Because this is such a common pattern,
we'll introduce some helper macros. The resulting messages aren't
as descriptive as we could make them, but the file/line information from
BUG() is enough to identify the problem (and anyway, the point is that
these should never be seen).
Each of the annotated callbacks in this patch triggers
-Wunused-parameters, and was manually inspected to make sure all callers
use the correct options (so none of these BUGs should be triggerable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The more library-ish parts of the codebase learned to work on the
in-core index-state instance that is passed in by their callers,
instead of always working on the singleton "the_index" instance.
* nd/no-the-index: (24 commits)
blame.c: remove implicit dependency on the_index
apply.c: remove implicit dependency on the_index
apply.c: make init_apply_state() take a struct repository
apply.c: pass struct apply_state to more functions
resolve-undo.c: use the right index instead of the_index
archive-*.c: use the right repository
archive.c: avoid access to the_index
grep: use the right index instead of the_index
attr: remove index from git_attr_set_direction()
entry.c: use the right index instead of the_index
submodule.c: use the right index instead of the_index
pathspec.c: use the right index instead of the_index
unpack-trees: avoid the_index in verify_absent()
unpack-trees: convert clear_ce_flags* to avoid the_index
unpack-trees: don't shadow global var the_index
unpack-trees: add a note about path invalidation
unpack-trees: remove 'extern' on function declaration
ls-files: correct index argument to get_convert_attr_ascii()
preload-index.c: use the right index instead of the_index
dir.c: remove an implicit dependency on the_index in pathspec code
...
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Side note, since we gain access to the right repository, we can stop
rely on the_repository in this code as well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parsing of -L[<N>][,[<M>]] parameters "git blame" and "git log"
take has been tweaked.
* is/parsing-line-range:
log: prevent error if line range ends past end of file
blame: prevent error if range ends past end of file
|
|
Code clean-up.
* sb/blame-color:
blame: prefer xsnprintf to strcpy for colors
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Our color buffers are all COLOR_MAXLEN, which fits the
largest possible color. So we can never overflow the buffer
by copying an existing color. However, using strcpy() makes
it harder to audit the code-base for calls that _are_
problems. We should use something like xsnprintf(), which
shows the reader that we expect this never to fail (and
provides a run-time assertion if it does, just in case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
|
|
Leakfix.
* sb/blame-color:
blame: release string_list after use in parse_color_fields()
|
|
If the -L option is used to specify a line range in git blame, and the
end of the range is past the end of the file, git will fail with a fatal
error. This commit prevents such behavior - instead we display the blame
for existing lines within the specified range. Tests are amended
accordingly.
This commit also fixes two corner cases. Blaming -L n,-(n+1) now blames
the first n lines of a file rather than from n to the end of the file.
Blaming -L ,-n will be treated as -L 1,-n and blame the first line of
the file, rather than blaming the whole file.
Signed-off-by: Isabella Stephens <istephens@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
|
|
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of register_commit_graft to
be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
ZheNing Hu
Philippe Blain
René Scharfe
Junio C Hamano
Denton Liu
Derrick Stolee
SZEDER Gábor
Hariom Verma
brian m. carlson
Jeff Hostetler
Barret Rhoden
Nguyễn Thái Ngọc Duy
Linus Torvalds
Jeff King
Isabella Stephens
Jonathan Nieder