| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Usage-string normalization.
* ac/usage-string-fixups:
amend remaining usage strings according to style guide
|
|
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
|
|
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a run command cannot be executed or found, shells return exit code
126 or 127, respectively. Valid run commands are allowed to return
these codes as well to indicate bad revisions, though, for historical
reasons. This means typos can cause bogus bisect runs that go over the
full distance and end up reporting invalid results.
The best solution would be to reserve exit codes 126 and 127, like
71b0251cdd (Bisect run: "skip" current commit if script exit code is
125., 2007-10-26) did for 125, and abort bisect run when we get them.
That might be inconvenient for those who relied on the documentation
stating that 126 and 127 can be used for bad revisions, though.
The workaround used by this patch is to run the command on a known-good
revision and abort if we still get the same error code. This adds one
step to runs with scripts that use exit codes 126 and 127, but keeps
them supported, with one exception: It won't work with commands that
cannot recognize the (manually marked) known-good revision as such.
Run commands that use low exit codes are unaffected. Typos are reported
after executing the missing command twice and three checkouts (the first
step, the known good revision and back to the revision of the first
step).
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the cleanup code out of the loop and make sure all execution paths
pass through it to avoid leaking memory.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The strvec "args" in bisect_run() is initialized and cleared, but never
added to. Nevertheless its first member is printed when reporting a
bisect_state() error. That's not useful, since it's always NULL.
Before d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) the intended new state was reported if it
could not be set. Reinstate that behavior and remove the unused strvec.
Reported-by: Ramkumar Ramachandra <r@artagnon.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing space between colon sentence (`bisect-run failed:`) and the
following sentence (`git bisect--helper --bisect-state`).
Fixes: d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13)
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After reimplementation of `git bisect run` in C,
`--bisect-next-check` subcommand is not needed anymore.
Let's remove it from options list and code.
Mentored by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_run()` shell function
in C and also add `--bisect-run` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_visualize()` shell function
in C and also add `--bisect-visualize` subcommand to
`git bisect--helper` to call it from git-bisect.sh.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit e4c7b33747 ("bisect--helper: reimplement `bisect_skip` shell
function in C", 2021-02-03), as part of the shell-to-C conversion,
forgot to read the 'terms' file (.git/BISECT_TERMS) during the new
'bisect skip' command implementation. As a result, the 'bisect skip'
command will use the default 'bad'/'good' terms. If the bisection
terms have been set to non-default values (for example by the
'bisect start' command), then the 'bisect skip' command will fail.
In order to correct this problem, we insert a call to the get_terms()
function, which reads the non-default terms from that file (if set),
in the '--bisect-skip' command implementation of 'bisect--helper'.
Also, add a test[1] to protect against potential future regression.
[1] https://lore.kernel.org/git/xmqqim45h585.fsf@gitster.g/T/#m207791568054b0f8cf1a3942878ea36293273c7d
Reported-by: Trygve Aaberge <trygveaa@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
|
|
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--check-and-set-terms` subcommand is no longer from the
git-bisect.sh shell script. Instead the function
`check_and_set_terms()` is called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_skip()` shell function in C and also add
`bisect-skip` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-skip` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --bisect-auto-next subcommand is no longer used from the
git-bisect.sh shell script. Instead the function bisect_auto_next()
is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `res` variable to store `bisect_reset()` output in BISECT_RESET
case option to make bisect--helper.c more consistent.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--bisect-write` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `bisect_write()`
is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_replay` shell function in C and also add
`--bisect-replay` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-replay` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_log()` shell function in C and also add
`--bisect-log` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-log` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewriting "git bisect" in C continues.
* mr/bisect-in-c-3:
bisect--helper: retire `--bisect-autostart` subcommand
bisect--helper: retire `--write-terms` subcommand
bisect--helper: retire `--check-expected-revs` subcommand
bisect--helper: reimplement `bisect_state` & `bisect_head` shell functions in C
bisect--helper: retire `--next-all` subcommand
bisect--helper: retire `--bisect-clean-state` subcommand
bisect--helper: finish porting `bisect_start()` to C
|
|
The `--bisect-autostart` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_autostart()` is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--write-terms` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `write_terms()`
is called from the C implementation of `set_terms()` and
`bisect_start()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--check-expected-revs` subcommand is no longer used from the
git-bisect.sh shell script. Functions `check_expected_revs` and
`is_expected_revs` are also deleted.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_state()` shell functions in C and also add a
subcommand `--bisect-state` to `git-bisect--helper` to call them from
git-bisect.sh .
Using `--bisect-state` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
`bisect_head()` is only called from `bisect_state()`, thus it is not
required to introduce another subcommand.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--next-all` subcommand is no longer used from the git-bisect.sh
shell script. Instead the function `bisect_next_all()` is called from
the C implementation of `bisect_next()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--bisect-clean-state` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_clean_state()` is directly called from the C
implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the subcommand to `git bisect--helper` and call it from
git-bisect.sh.
With the conversion of `bisect_auto_next()` from shell to C in a
previous commit, `bisect_start()` can now be fully ported to C.
So let's complete the `--bisect-start` subcommand of
`git bisect--helper` so that it fully implements `bisect_start()`,
and let's use this subcommand in `git-bisect.sh` instead of
`bisect_start()`.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite of the "git bisect" script in C continues.
* mr/bisect-in-c-2:
bisect--helper: reimplement `bisect_next` and `bisect_auto_next` shell functions in C
bisect: call 'clear_commit_marks_all()' in 'bisect_next_all()'
bisect--helper: reimplement `bisect_autostart` shell function in C
bisect--helper: introduce new `write_in_file()` function
bisect--helper: use '-res' in 'cmd_bisect__helper' return
bisect--helper: BUG() in cmd_*() on invalid subcommand
|
|
"git bisect start X Y", when X and Y are not valid committish
object names, should take X and Y as pathspec, but didn't.
* cc/bisect-start-fix:
bisect: don't use invalid oid as rev when starting
|
|
In 06f5608c14 (bisect--helper: `bisect_start` shell function
partially in C, 2019-01-02), we changed the following shell
code:
- rev=$(git rev-parse -q --verify "$arg^{commit}") || {
- test $has_double_dash -eq 1 &&
- die "$(eval_gettext "'\$arg' does not appear to be a valid revision")"
- break
- }
- revs="$revs $rev"
into:
+ char *commit_id = xstrfmt("%s^{commit}", arg);
+ if (get_oid(commit_id, &oid) && has_double_dash)
+ die(_("'%s' does not appear to be a valid "
+ "revision"), arg);
+
+ string_list_append(&revs, oid_to_hex(&oid));
+ free(commit_id);
In case of an invalid "arg" when "has_double_dash" is false, the old
code would "break" out of the argument loop.
In the new C code though, `oid_to_hex(&oid)` is unconditonally
appended to "revs". This is wrong first because "oid" is junk as
`get_oid(commit_id, &oid)` failed and second because it doesn't break
out of the argument loop.
Not breaking out of the argument loop means that "arg" is then not
treated as a path restriction (which is wrong).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
functions in C
Reimplement the `bisect_next()` and the `bisect_auto_next()` shell functions
in C and add the subcommands to `git bisect--helper` to call them from
git-bisect.sh .
bisect_auto_next() function returns an enum bisect_error type as whole
`git bisect` can exit with an error code when bisect_next() does.
Return an error when `bisect_next()` fails, that fix a bug on shell script
version.
Using `--bisect-next` and `--bisect-auto-next` subcommands is a
temporary measure to port shell function to C so as to use the existing
test suite. As more functions are ported, `--bisect-auto-next`
subcommand will be retired and will be called by some other methods.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `bisect_autostart()` shell function in C and add the
C implementation from `bisect_next()` which was previously left
uncovered.
Add `--bisect-autostart` subcommand to be called from git-bisect.sh.
Using `--bisect-autostart` subcommand is a temporary measure to port
the shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and
bisect_autostart() will be called directly by `bisect_state()`.
Change behavior of shell script that returned success when user aborted
the bisection.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's refactor code adding a new `write_in_file()` function
that opens a file for writing a message and closes it and a
wrapper for writing mode.
This helper will be used in later steps and makes the code
simpler and easier to understand.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Following 'enum bisect_error' vocabulary, return variable 'res' is
always non-positive.
Let's use '-res' instead of 'abs(res)' to make the code clearer.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cmd_bisect__helper() function, if an invalid or no
subcommand is passed there is a BUG.
BUG() out instead of returning an error.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The positional arguments are specified in this order: "bad" then "good".
To avoid confusion, the options above the positional arguments
are now specified in the same order. They can still be specified in any
order since they're options, not positional arguments.
Signed-off-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bisect" learns the "--first-parent" option to find the first
breakage along the first-parent chain.
* al/bisect-first-parent:
bisect: combine args passed to find_bisection()
bisect: introduce first-parent flag
cmd_bisect__helper: defer parsing no-checkout flag
rev-list: allow bisect and first-parent flags
t6030: modernize "git bisect run" tests
|
|
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
|
|
Upon seeing a merge commit when bisecting, this option may be used to
follow only the first parent.
In detecting regressions introduced through the merging of a branch, the
merge commit will be identified as introduction of the bug and its
ancestors will be ignored.
This option is particularly useful in avoiding false positives when a
merged branch contained broken or non-buildable commits, but the merge
itself was OK.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_bisect__helper() is intended as a temporary shim layer serving as an
interface for git-bisect.sh. This function and git-bisect.sh should
eventually be replaced by a C implementation, cmd_bisect(), serving as
an entrypoint for all "git bisect ..." shell commands: cmd_bisect() will
only parse the first token following "git bisect", and dispatch the
remaining args to the appropriate function ["bisect_start()",
"bisect_next()", etc.].
Thus, cmd_bisect__helper() should not be responsible for parsing flags
like --no-checkout. Instead, let the --no-checkout flag remain in the
argv array, so it may be evaluated alongside the other options already
parsed by bisect_start().
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both the git-bisect.sh as bisect--helper inspected the file system
directly.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to parse "git bisect start" command line was lax in
validating the arguments.
* cb/bisect-helper-parser-fix:
bisect--helper: avoid segfault with bad syntax in `start --term-*`
|
|
06f5608c14 (bisect--helper: `bisect_start` shell function partially in C,
2019-01-02) adds a lax parser for `git bisect start` which could result
in a segfault under a bad syntax call for start with custom terms.
Detect if there are enough arguments left in the command line to use for
--term-{old,good,new,bad} and abort with the same syntax error the original
implementation will show if not.
While at it, remove an unnecessary (and incomplete) check for unknown
arguments and make sure to add a test to avoid regressions.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Christian Couder <christian.couder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Abhradeep Chakraborty
Jean-Noël Avila
René Scharfe
Bagas Sanjaya
Miriam Rubio
Tanushree Tumane
Pranit Bauva
Ævar Arnfjörð Bjarmason
Ramsay Jones
Jeff King
Christian Couder
Hugo Locurcio
Aaron Lipman
Han-Wen Nienhuys
Carlo Marcelo Arenas Belón