| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
|
|
5166714 (apply: Allow blank context lines to match beyond EOF,
2010-03-06) and then later 0c3ef98 (apply: Allow blank *trailing*
context lines to match beyond EOF, 2010-04-08) taught "git apply"
to trim new blank lines at the end in the patch text when matching
the contents being patched and the preimage recorded in the patch,
under --whitespace=fix mode.
When a preimage is modified to match the current contents in
preparation for such a "fixed" patch application, the context lines
in the postimage must be updated to match (otherwise, it would
reintroduce whitespace breakages), and update_pre_post_images()
function is responsible for doing this. However, this function was
not updated to take into account a case where the removal of
trailing blank lines reduces the number of lines in the preimage,
and triggered an assertion error.
The logic to fix the postimage by copying the corrected context
lines from the preimage was not prepared to handle this case,
either, but it was protected by the assert() and only got exposed
when the assertion is corrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
|
|
* pg/maint-apply-remove-unused-variable:
apply: delete unused deflate_origlen from patch struct
|
|
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or
mode changes have preimage and postimage pathnames in different
places in a form that can be parsed unambiguously and did not suffer
from this problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
|
|
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
|
|
Back when "git apply" was written, we made sure that the user can
skip more than the default number of path components (i.e. 1) by
giving "-p<n>", but the logic for doing so was built around the
notion of "we skip N slashes and stop". This obviously does not
work well when running under -p0 where we do not want to skip any,
but still want to skip SP/HT that separates the pathnames of
preimage and postimage and want to reject absolute pathnames.
Stop using "stop_at_slash()", and instead introduce a new helper
"skip_tree_prefix()" with similar logic but works correctly even for
the -p0 case.
This is an ancient bug, but has been masked for a long time because
most of the patches are text and have other clues to tell us the
name of the preimage and the postimage.
Noticed by Colin McCabe.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove an unused field.
* pg/maint-apply-remove-unused-variable:
apply: delete unused deflate_origlen from patch struct
|
|
It hasn't been used since 2006, as of commit 3cd4f5e8
"git-apply --binary: clean up and prepare for --reverse"
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split lower bits of ce_flags field and creates a new ce_namelen
field in the in-core index structure.
* tg/ce-namelen-field:
Strip namelen out of ce_flags into a ce_namelen field
|
|
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
|
|
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
|
|
Strip the name length from the ce_flags field and move it
into its own ce_namelen field in struct cache_entry. This
will both give us a tiny bit of a performance enhancement
when working with long pathnames and is a refactoring for
more readability of the code.
It enhances readability, by making it more clear what
is a flag, and where the length is stored and make it clear
which functions use stages in comparisions and which only
use the length.
It also makes CE_NAMEMASK private, so that users don't
mistakenly write the name length in the flags.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "index" line read from the patch to reconstruct a partial
preimage tree records the object names of blob objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now we have all the necessary logic to fall back on three-way merge when
the patch does not cleanly apply, insert the conflicted entries to the
index as appropriate. This obviously triggers only when the "--index"
option is used.
When we fall back to three-way merge and some of the merges fail, just
like the case where the "--reject" option was specified and we had to
write some "*.rej" files out for unapplicable patches, exit the command
with non-zero status without showing the diffstat and summary. Otherwise
they would make the list of problematic paths scroll off the display.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a patch wants to create a path, but we already have it in our
current state, pretend as if the patch and we independently added
the same path and cause add/add conflict, so that the user can
resolve it just like "git merge" in the same situation.
For that purpose, implement load_current() in terms of the
load_patch_target() helper introduced earlier to read the current
contents from the path given by patch->new_name (patch->old_name is
NULL for a creation patch).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will be adding another caller of this function in a later patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a patch does not apply to what we have, but we know the preimage the
patch was made against, we apply the patch to the preimage to compute what
the patch author wanted the result to look like, and attempt a three-way
merge between the result and our version, using the intended preimage as
the base version.
When we are applying the patch using the index, we would additionally need
to add the object names of these three blobs involved in the merge, which
is not yet done in this step, but we add a field to "struct patch" so that
later write-out step can use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Grab the preimage blob the patch claims to be based on out of the object
store, apply the patch, and then call three-way-merge function. This step
still does not plug the actual three-way merge logic yet, but we are
getting there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Begin teaching the three-way merge fallback logic "git am -3" uses
to the underlying "git apply". It only implements the command line
parsing part, and does not do anything interesting yet, other than
making sure that "--reject" and "--3way" are not given together, and
making "--3way" imply "--index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The check_to_create_blob() function used to check only the case
where we are applying to the working tree. Rename the function to
check_to_create() and make it also responsible for checking the case
where we apply to the index. Also make its caller responsible for
issuing an error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
load_preimage() is very specific to grab the current contents for
the path given by patch->old_name. Split the logic that grabs the
contents for a path out of it into a separate load_patch_target()
function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to grab the result of application of a previous patch in the
input was mixed with error message generation for a case where a later
patch tries to modify contents of a path that has been removed.
The same code is duplicated elsewhere in the code. Introduce a helper
to clarify what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given a patch for a single path, the function apply_data() reads the
preimage in core, and applies the change represented in the patch.
Separate out the first part that reads the preimage into a separate
helper function load_preimage().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a patch wants to touch a path, if the path exists in the index
but is missing in the working tree, "git apply --index" checks out
the file to the working tree from the index automatically and then
applies the patch.
Split this logic out to a separate helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reading a blob out of the object store does not have to require that the
caller has a cache entry for it.
Create a read_blob_object() helper function that takes the object name and
mode, and use it to reimplement the original function as a thin wrapper to
it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clear_image() function did not clear the line table in the image
structure; this does not matter for the current callers, as the function
is only called from the codepaths that deal with binary patches where the
line table is never populated, and the codepaths that do populate the line
table free it themselves.
But it will start to matter when we introduce a codepath to retry a failed
patch, so make sure it clears and frees everything.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code is littered with to_be_deleted() whose purpose is not so clear.
Describe where it matters. Also remove an extra space before "#define"
that snuck in by mistake at 7fac0ee (builtin-apply: keep information about
files to be deleted, 2009-04-11).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This check is not only about type-change (for which it would be
sufficient to check only was_deleted()) but is also about a swap
rename. Otherwise to_be_deleted() check is not justified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 4th arg of "new mode (%o) of %s does not match old mode (%o)%s%s"
is blank string or string " of ". Even mark the string " of " for a
complete i18n, this message is still hard to translate right.
Split it into two slight different messages would make l10n teams happy.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Text from "git cmd --help" are getting prepared for i18n.
By Nguyễn Thái Ngọc Duy
* nd/i18n-parseopt:
i18n: apply: mark parseopt strings for translation
i18n: parseopt: lookup help and argument translations when showing usage
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It marks the string "...inconsistent %s filename..." where %s is either
"old" or "new" from caller. Make it two strings "...inconsistent new
filename..." and "...inconsistent old filename...".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Valgrind reports quite a lot of discarded memory inside apply.
Fix them, audit and document the buffer ownership rules.
By Junio C Hamano (8) and Jared Hance (1)
* jh/apply-free-patch:
apply: document buffer ownership rules across functions
apply: tighten constness of line buffer
apply: drop unused macro
apply: free unused fragments for submodule patch
apply: free patch->result
apply: release memory for fn_table
apply: free patch->{def,old,new}_name fields
apply: rename free_patch() to free_patch_list()
apply: do not leak patches and fragments
|
|
In general, the private functions in this file were not very
much documented; even though what each of them do is reasonably
self explanatory, the ownership rules for various buffers and
data structures were not very obvious.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These point into a single line in the patch text we read from
the input, and they are not used to modify it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CHUNKSIZE is no longer used.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We simply discarded the fragments that we are not going to use upon seeing
a patch to update the submodule commit bound at path that we have not
checked out.
Free these fragments, not to leak them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is by far the largest piece of data, much larger than the patch and
fragment structures or the three name fields in the patch structure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fn_table is used to record the result of earlier patch application in
case a hand-crafted input file contains multiple patches to the same file.
Both its string key (filename) and the contents are borrowed from "struct
patch" that represents the previous application in the same apply_patch()
call, and they do not leak, but the table itself was not freed properly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were all allocated in the heap by parsing the header parts of the
patch, but we did not bother to free them. Some used to share the memory
(e.g. copying def_name to old_name) so this is not just the matter of
adding three calls to free().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As that is the only logical name for a function that walks a list
and frees each element on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the while loop inside apply_patch, patch and fragments are
dynamically allocated with a calloc. However, only unused patches
are actually freed and the rest are left to leak. Since a list is
actively built up consisting of the used patches, they can simply be
iterated and freed at the end of the function.
In addition, the text in fragments were not freed, primarily because
they mostly point into a patch text that is freed as a whole. But
there are some cases where new piece of memory is allocated and
pointed by a fragment (namely, when handling a binary patch).
Introduce a free_patch bitfield to mark each fragment if its text
needs to be freed, and free patches, fragments and fragment text
that need to be freed when we are done with the input.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Nguyễn Thái Ngọc Duy
Paul Gortmaker
Thomas Gummerer
Jiang Xin
Jared Hance