| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
|
|
The run-command API has been updated so that the callers can easily
ask the file descriptors open for packfiles to be closed immediately
before spawning commands that may trigger auto-gc.
* js/run-command-close-packs:
Close object store closer to spawning child processes
run_auto_maintenance(): implicitly close the object store
run-command: offer to close the object store before running
run-command: prettify the `RUN_COMMAND_*` flags
pull: release packs before fetching
commit-graph: when closing the graph, also release the slab
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before spawning the auto maintenance, we need to make sure that we
release all open file handles to all the `.pack` files (and MIDX files
and commit-graph files and...) so that the maintenance process has the
freedom to delete those files.
So far, we did this manually every time before calling
`run_auto_maintenance()`. With the new `close_object_store` flag, we can
do that implicitly in that function, which is more robust because future
callers won't be able to forget to close the object store.
Note: this changes behavior slightly, as we previously _always_ closed
the object store, but now we only close the object store when actually
running the auto maintenance. In practice, this should not matter (if
anything, it might speed up operations where auto maintenance is
disabled).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous changes, mailinfo has learnt to process lines that decoded
from base64 or quoted-printable, and ends with CRLF.
Let's teach "am" that new trick, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* jk/committer-date-is-author-date-fix-simplify:
am, sequencer: stop parsing our own committer ident
|
|
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
|
|
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
|
|
For the --committer-date-is-author-date option of git-am and git-rebase,
we format the committer ident, then re-parse it to find the name and
email, and then feed those back to fmt_ident().
We can simplify this by handling it all at the time of the fmt_ident()
call. We pass in the appropriate getenv() results, and if they're not
present, then our WANT_COMMITTER_IDENT flag tells fmt_ident() to fill in
the appropriate value from the config. Which is exactly what
git_committer_ident() was doing under the hood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit e8cbe2118a (am: stop exporting GIT_COMMITTER_DATE, 2020-08-17)
rewrote the code for setting the committer date to use fmt_ident(),
rather than setting an environment variable and letting commit_tree()
handle it. But it introduced two bugs:
- we use the author email string instead of the committer email
- when parsing the committer ident, we used the wrong variable to
compute the length of the email, resulting in it always being a
zero-length string
This commit fixes both, which causes our test of this option via the
rebase "apply" backend to now succeed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu>
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of 517fe807d6 (assert NOARG/NONEG behavior of
parse-options callbacks, 2018-11-05), let's cover some parse-options
callbacks which expect to be used with PARSE_OPT_NONEG but don't
explicitly assert that this is the case. These callbacks are all used
correctly in the current code, but this will help document their
expectations and future-proof the code.
As a bonus, it also silences -Wunused-parameters (these were added since
the initial sweep of 517fe807d6, and we can't yet turn on
-Wunused-parameters to remind people because it has too many existing
false positives).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
The run_auto_gc() method is used in several places to trigger a check
for repo maintenance after some Git commands, such as 'git commit' or
'git fetch'.
To allow for extra customization of this maintenance activity, replace
the 'git gc --auto [--quiet]' call with one to 'git maintenance run
--auto [--quiet]'. As we extend the maintenance builtin with other
steps, users will be able to select different maintenance activities.
Rename run_auto_gc() to run_auto_maintenance() to be clearer what is
happening on this call, and to expose all callers in the current diff.
Rewrite the method to use a struct child_process to simplify the calls
slightly.
Since 'git fetch' already allows disabling the 'git gc --auto'
subprocess, add an equivalent option with a different name to be more
descriptive of the new behavior: '--[no-]maintenance'. Update the
documentation to include these options at the same time.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" learns a bit more options.
* pw/rebase-i-more-options:
t3436: do not run git-merge-recursive in dashed form
rebase: add --reset-author-date
rebase -i: support --ignore-date
rebase -i: support --committer-date-is-author-date
am: stop exporting GIT_COMMITTER_DATE
rebase -i: add --ignore-whitespace flag
|
|
The implementation of --committer-date-is-author-date exports
GIT_COMMITTER_DATE to override the default committer date but does not
reset GIT_COMMITTER_DATE in the environment after creating the commit
so it is set in the environment of any hooks that get run. We're about
to add the same functionality to the sequencer and do not want to have
GIT_COMMITTER_DATE set when running hooks or exec commands so lets
update commit_tree_extended() to take an explicit committer so we
override the default date without setting GIT_COMMITTER_DATE in the
environment.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to eventually drop the use of the "argv_array" name in favor of
"strvec." Unlike most other uses of the name, this one is embedded in a
function name, so the definition and all of the callers need to be
updated at the same time.
We don't technically need to update the parameter types here (our
preprocessor compat macros make the two names interchangeable), but
let's do so to keep the site consistent for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These commands take the --quiet option for their own operation, but
they forget to pass the option down when they invoke "git gc --auto"
internally.
Teach them to do so using the run_auto_gc() helper we added in the
previous step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output of "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable
or base64. Add a new mode to "git am --show-current-patch" in order to
straighten the suggestion.
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git am --show-current-patch" was added in commit 984913a210 ("am:
add --show-current-patch", 2018-02-12), "git am" started recommending it
as a replacement for .git/rebase-merge/patch. Unfortunately the suggestion
is somewhat misguided; for example, the output "git am --show-current-patch"
cannot be passed to "git apply" if it is encoded as quoted-printable or
base64. To simplify worktree operations and to avoid that users poke into
.git, it would be better if "git am" also provided a mode that copies
.git/rebase-merge/patch to stdout.
One possibility could be to have completely separate options, introducing
for example --show-current-message (for .git/rebase-apply/NNNN)
and --show-current-diff (for .git/rebase-apply/patch), while possibly
deprecating --show-current-patch.
That would even remove the need for the first two patches in the series.
However, the long common prefix would have prevented using an abbreviated
option such as "--show". Therefore, I chose instead to add a string
argument to --show-current-patch. The new argument is optional, so that
"git am --show-current-patch"'s behavior remains backwards-compatible.
The next choice to make is how to handle multiple --show-current-patch
options. Right now, something like "git am --abort --show-current-patch"
is rejected, and the previous suggestion would likewise have naturally
rejected a command line like
git am --show-current-message --show-current-diff
Therefore, I decided to also reject for example
git am --show-current-patch=diff --show-current-patch=raw
In other words the whole of --show-current-patch=xxx (including the
optional argument) is treated as the command mode. I found this to be
more consistent and intuitive, even though it differs from the usual
"last one wins" semantics of the git command line.
Add the code to parse submodes based on the above design, where for now
"raw" is the only valid submode. "raw" prints the full e-mail message
just like "git am --show-current-patch".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will allow stashing the submode of --show-current-patch from a
callback function. Using a struct will allow accessing both fields from
outside cmd_am (through container_of).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The merge-recursive machiery is one of the most complex parts of
the system that accumulated cruft over time. This large series
cleans up the implementation quite a bit.
* en/merge-recursive-cleanup: (26 commits)
merge-recursive: fix the fix to the diff3 common ancestor label
merge-recursive: fix the diff3 common ancestor label for virtual commits
merge-recursive: alphabetize include list
merge-recursive: add sanity checks for relevant merge_options
merge-recursive: rename MERGE_RECURSIVE_* to MERGE_VARIANT_*
merge-recursive: split internal fields into a separate struct
merge-recursive: avoid losing output and leaking memory holding that output
merge-recursive: comment and reorder the merge_options fields
merge-recursive: consolidate unnecessary fields in merge_options
merge-recursive: move some definitions around to clean up the header
merge-recursive: rename merge_options argument to opt in header
merge-recursive: rename 'mrtree' to 'result_tree', for clarity
merge-recursive: use common name for ancestors/common/base_list
merge-recursive: fix some overly long lines
cache-tree: share code between functions writing an index as a tree
merge-recursive: don't force external callers to do our logging
merge-recursive: remove useless parameter in merge_trees()
merge-recursive: exit early if index != head
Ensure index matches head before invoking merge machinery, round N
merge-recursive: remove another implicit dependency on the_repository
...
|
|
Code cleanup.
* rs/dedup-includes:
treewide: remove duplicate #include directives
|
|
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
|
|
Found with "git grep '^#include ' '*.c' | sort | uniq -d".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Getting the lock for the index, refreshing it and then writing it is a
pattern that happens more than once throughout the codebase, and isn't
trivial to get right. Factor out the refresh_and_write_cache function
from builtin/am.c to read-cache.c, so it can be re-used in other
places in a subsequent commit.
Note that we return different error codes for failing to refresh the
cache, and failing to write the index. The current caller only cares
about failing to write the index. However for other callers we're
going to convert in subsequent patches we will need this distinction.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We try to parse the "author" line out of a commit buffer. We handle the
case that split_ident_line() doesn't work, but we don't do any error
checking that we found an "author" line in the first place! This would
cause us to segfault on such a corrupt object.
Let's put in an explicit NULL check (we can just die(), which is what a
bogus split would do, too). As a bonus, this silences a warning when
compiling with gcc 9.2.1 using "-flto -O3", which claims that ident_len
may be uninitialized (it would only be if we had a NULL here).
Reported-by: Stephan Beyer <s-beyer@gmx.net>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve code readability by introducing an enum to replace the
not-quite-boolean values taken on by detect_directory_renames.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
The commit-graph file is now part of the "files that the runtime
may keep open file descriptors on, all of which would need to be
closed when done with the object store", and the file descriptor to
an existing commit-graph file now is closed before "gc" finalizes a
new instance to replace it.
* ds/close-object-store:
packfile: rename close_all_packs to close_object_store
packfile: close commit-graph in close_all_packs
commit-graph: use raw_object_store when closing
|
|
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
|
|
The close_all_packs() method is now responsible for more than just pack-files.
It also closes the commit-graph and the multi-pack-index. Rename the function
to be more descriptive of its larger role. The name also fits because the
input parameter is a raw_object_store.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In --interactive mode, "git am --resolved" will try to generate a patch
based on what is in the index, so that it can prompt "apply this
patch?". To do so it needs the tree of HEAD, which it tries to get with
get_oid_tree(). However, this doesn't yield a tree object; the "tree"
part just means "if you must disambiguate short oids, then prefer trees"
(and we do not need to disambiguate at all, since we are feeding a ref).
Instead, we must parse the oid as a commit (which should always be true
in a non-corrupt repository), and access its tree pointer manually.
This has been broken since the conversion to C in 7ff2683253
(builtin-am: implement -i/--interactive, 2015-08-04), but there was no
test coverage because of interactive-mode's insistence on having a tty.
That was lifted in the previous commit, so we can now add a test for
this case.
Note that before this patch, the test would result in a BUG() which
comes from 3506dc9445 (has_uncommitted_changes(): fall back to empty
tree, 2018-07-11). But before that, we'd have simply segfaulted (and in
fact this is the exact type of case the BUG() added there was trying to
catch!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have required that the stdin of "am --interactive" be a tty since
a1451104ac (git-am: interactive should fail gracefully., 2005-10-12).
However, this isn't strictly necessary, and makes the tool harder to
test (and is unlike all of our other --interactive commands).
The goal of that commit was to make sure that somebody does not do:
git am --interactive <mbox
and cause us to read commands from the mbox. But we can simply check
up front for this case and complain before entering the interactive
loop.
Technically this disallows:
git am --interactive </dev/null
where our lack of patches means we would never prompt for anything, and
so the old code would not notice our lack of tty (and now we'd die
early). But since such a command is totally pointless, it's no loss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the conversion of git-am from shell script to C, we switched to using
git_prompt(). Unlike the original shell command "read reply", this
doesn't read from stdin at all, but rather from /dev/tty.
In most cases this distinction wouldn't matter. We require (as the shell
script did) that stdin is a tty, so they would generally be the same
thing. But one important exception is our test suite: even with
test_terminal, we cannot test "am --interactive" because it insists on
reading from /dev/tty, not the pseudo-tty we've set up in the test
script.
Fixing this clears the way to adding tests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'll never see a NULL returned from git_prompt(); if it can't produce
any input for us (e.g., because the terminal got EOF) then it will just
die().
So there's no need for us to handle NULL here. And even if there was, it
doesn't make sense to continue; on a true terminal hangup we'd just loop
infinitely trying to get input that will never come.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char[20] to struct object_id continues.
* bc/hash-transition-16: (35 commits)
gitweb: make hash size independent
Git.pm: make hash size independent
read-cache: read data in a hash-independent way
dir: make untracked cache extension hash size independent
builtin/difftool: use parse_oid_hex
refspec: make hash size independent
archive: convert struct archiver_args to object_id
builtin/get-tar-commit-id: make hash size independent
get-tar-commit-id: parse comment record
hash: add a function to lookup hash algorithm by length
remote-curl: make hash size independent
http: replace sha1_to_hex
http: compute hash of downloaded objects using the_hash_algo
http: replace hard-coded constant with the_hash_algo
http-walker: replace sha1_to_hex
http-push: remove remaining uses of sha1_to_hex
http-backend: allow 64-character hex names
http-push: convert to use the_hash_algo
builtin/pull: make hash-size independent
builtin/am: make hash size independent
...
|
|
Fourth batch to teach the diff machinery to use the parse-options
API.
* nd/diff-parseopt-4:
am: avoid diff_opt_parse()
diff --no-index: use parse_options() instead of diff_opt_parse()
range-diff: use parse_options() instead of diff_opt_parse()
diff.c: allow --no-color-moved-ws
diff-parseopt: convert --color-moved-ws
diff-parseopt: convert --[no-]color-moved
diff-parseopt: convert --inter-hunk-context
diff-parseopt: convert --no-prefix
diff-parseopt: convert --line-prefix
diff-parseopt: convert --[src|dst]-prefix
diff-parseopt: convert --[no-]abbrev
diff-parseopt: convert --diff-filter
diff-parseopt: convert --find-object
diff-parseopt: convert -O
diff-parseopt: convert --pickaxe-all|--pickaxe-regex
diff-parseopt: convert -S|-G
diff-parseopt: convert -l
diff-parseopt: convert -z
diff-parseopt: convert --ita-[in]visible-in-index
diff-parseopt: convert --ws-error-highlight
|
|
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using GIT_SHA1_HEXSZ, switch to using the_hash_algo and
parse_oid_hex to parse the lines involved in rebasing notes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff_opt_parse() is a heavy hammer to just set diff filter. But it's
the only way because of the diff_status_letters[] mapping. Add a new
API to set diff filter and use it in git-am. diff_opt_parse()'s only
remaining call site in revision.c will be gone soon and having it here
just because of git-am does not make sense.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
A more structured way to obtain execution trace has been added.
* jh/trace2:
trace2: add for_each macros to clang-format
trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
trace2:data: add subverb for rebase
trace2:data: add subverb to reset command
trace2:data: add subverb to checkout command
trace2:data: pack-objects: add trace2 regions
trace2:data: add trace2 instrumentation to index read/write
trace2:data: add trace2 hook classification
trace2:data: add trace2 transport child classification
trace2:data: add trace2 sub-process classification
trace2:data: add editor/pager child classification
trace2:data: add trace2 regions to wt-status
trace2: collect Windows-specific process information
trace2: create new combined trace facility
trace2: Documentation/technical/api-trace2.txt
|
|
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
|
|
Classify certain child processes as hooks.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Johannes Schindelin
Ben Boeckel
Ævar Arnfjörð Bjarmason
Đoàn Trần Công Danh
ZheNing Hu
Jeff King
Bradley M. Kuhn
Derrick Stolee
Phillip Wood
Paolo Bonzini
René Scharfe
Thomas Gummerer
Nguyễn Thái Ngọc Duy
brian m. carlson
Jeff Hostetler