| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
|
|
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent stagins a modification, but we skipped the
--renormalize mode. Update renormalize_tracked_files() to ignore cache
entries whose path is outside of the sparse-checkout cone (unless
--sparse is provided). Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added checks for path_in_sparse_checkout() to portions of 'git add'
that add warnings and prevent staging a modification, but we skipped the
--chmod mode. Update chmod_pathspec() to ignore cache entries whose path
is outside of the sparse-checkout cone (unless --sparse is provided).
Add a test in t3705.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We previously modified 'git add' to refuse updating index entries
outside of the sparse-checkout cone. This is justified to prevent users
from accidentally getting into a confusing state when Git removes those
files from the working tree at some later point.
Unfortunately, this caused some workflows that were previously possible
to become impossible, especially around merge conflicts outside of the
sparse-checkout cone. These were documented in tests within t1092.
We now re-enable these workflows using a new '--sparse' option to 'git
add'. This allows users to signal "Yes, I do know what I'm doing with
these files," and accept the consequences of the files leaving the
worktree later.
We delay updating the advice message until implementing a similar option
in 'git rm' and 'git mv'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git add' adds a tracked file that is outside of the
sparse-checkout cone, it checks the SKIP_WORKTREE bit to see if the file
exists outside of the sparse-checkout cone. This is usually correct,
except in the case of a merge conflict outside of the cone.
Modify add_pathspec_matched_against_index() to be more careful about
paths by checking the sparse-checkout patterns in addition to the
SKIP_WORKTREE bit. This causes 'git add' to no longer allow files
outside of the cone that removed the SKIP_WORKTREE bit due to a merge
conflict.
With only this change, users will only be able to add the file after
adding the file to the sparse-checkout cone. A later change will allow
users to force adding even though the file is outside of the
sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_files() method in builtin/add.c takes a set of untracked files
that are being added by the input pathspec and inserts them into the
index. If these files are outside of the sparse-checkout cone, then they
gain the SKIP_WORKTREE bit at some point. However, this was not checked
before inserting into the index, so these files are added even though we
want to avoid modifying the index outside of the sparse-checkout cone.
Add a check within add_files() for these files and write the advice
about files outside of the sparse-checkout cone.
This behavior change modifies some existing tests within t1092. These
tests intended to document how a user could interact with the existing
behavior in place. Many of these tests need to be marked as expecting
failure. A future change will allow these tests to pass by adding a flag
to 'git add' that allows users to modify index entries outside of the
sparse-checkout cone.
The 'submodule handling' test is intended to document what happens to
directories that contain a submodule when the sparse index is enabled.
It is not trying to say that users should be able to add submodules
outside of the sparse-checkout cone, so that test can be modified to
avoid that operation.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
|
|
Code clean up to migrate callers from older advice_config[] based
API to newer advice_if_enabled() and advice_enabled() API.
* ab/retire-advice-config:
advice: move advice.graftFileDeprecated squashing to commit.[ch]
advice: remove use of global advice_add_embedded_repo
advice: remove read uses of most global `advice_` variables
advice: add enum variants for missing advice variables
|
|
Error diagnostics improvement.
* rs/xopen-reports-open-failures:
use xopen() to handle fatal open(2) failures
xopen: explicitly report creation failures
|
|
As we integrate the sparse index into more builtins, we occasionally
need to check the sparse-checkout patterns to see if a path is within
the sparse-checkout cone. Create some helper methods that help
initialize the patterns and check for pattern matching to make this
easier.
The existing callers of commands like get_sparse_checkout_patterns() use
a custom 'struct pattern_list' that is not necessarily the one in the
'struct index_state', so there are not many previous uses that could
adopt these helpers. There are just two in builtin/add.c and
sparse-index.c that can use path_in_sparse_checkout().
We add a path_in_cone_mode_sparse_checkout() as well that will only
return false if the path is outside of the sparse-checkout definition
_and_ the sparse-checkout patterns are in cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The external use of this variable was added in 532139940c9 (add: warn
when adding an embedded repository, 2017-06-14). For the use-case it's
more straightforward to track whether we've shown advice in
check_embedded_repo() than setting the global variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add" can work better with the sparse index.
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
|
|
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
|
|
The --renormalize option updates the EOL conversions for the tracked
files. However, the loop already ignores files marked with the
SKIP_WORKTREE bit, so it will continue to do so with a sparse index
because the sparse directory entries also have this bit set.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since b243012 (refresh_index(): add flag to ignore SKIP_WORKTREE
entries, 2021-04-08), 'git add --refresh <path>' will output a warning
message when the path is outside the sparse-checkout definition. The
implementation of this warning happened in parallel with the
sparse-index work to add ensure_full_index() calls throughout the
codebase.
Update this loop to have the proper logic that checks to see if the
pathspec is outside the sparse-checkout definition. This avoids the need
to expand the sparse directory entry and determine if the path is
tracked, untracked, or ignored. We simply avoid updating the stat()
information because there isn't even an entry that matches the path!
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable command_requires_full_index for 'git add'. This does not require
any additional removals of ensure_full_index(). The main reason is that
'git add' discovers changes based on the pathspec and the worktree
itself. These are then inserted into the index directly, and calls to
index_name_pos() or index_file_exists() already call expand_to_path() at
the appropriate time to support a sparse-index.
Add a test to check that 'git add -A' and 'git add <file>' does not
expand the index at all, as long as <file> is not within a sparse
directory. This does not help the global 'git add .' case.
We can measure the improvement using p2000-sparse-operations.sh with
these results:
Test HEAD~1 HEAD
------------------------------------------------------------------------------
2000.6: git add -A (full-index-v3) 0.35(0.30+0.05) 0.37(0.29+0.06) +5.7%
2000.7: git add -A (full-index-v4) 0.31(0.26+0.06) 0.33(0.27+0.06) +6.5%
2000.8: git add -A (sparse-index-v3) 0.57(0.53+0.07) 0.05(0.04+0.08) -91.2%
2000.9: git add -A (sparse-index-v4) 0.58(0.55+0.06) 0.05(0.05+0.06) -91.4%
While the 91% improvement seems impressive, it's important to recognize
that previously we had significant overhead for expanding the
sparse-index. Comparing to the full index case, 'git add -A' goes from
0.37s to 0.05s, which is "only" an 86% improvement.
This modification to 'git add' creates some behavior change depending on
the use of a sparse index. We modify a test in t1092 to demonstrate
these changes which will be remedied in future changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -i --dry-run" does not dry-run, which was surprising. The
combination of options has taught to error out.
* ow/no-dryrun-in-add-i:
add: die if both --dry-run and --interactive are given
|
|
"git add" and "git rm" learned not to touch those paths that are
outside of sparse checkout.
* mt/add-rm-in-sparse-checkout:
rm: honor sparse checkout patterns
add: warn when asked to update SKIP_WORKTREE entries
refresh_index(): add flag to ignore SKIP_WORKTREE entries
pathspec: allow to ignore SKIP_WORKTREE entries on index matching
add: make --chmod and --renormalize honor sparse checkouts
t3705: add tests for `git add` in sparse checkouts
add: include magic part of pathspec on --refresh error
|
|
The interactive machinery does not obey --dry-run. Die appropriately
if both flags are passed.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before iterating over all cache entries, ensure that a sparse index is
expanded to a full index to avoid unexpected behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git add` already refrains from updating SKIP_WORKTREE entries, but it
silently exits with zero code when it is asked to do so. Instead, let's
warn the user and display a hint on how to update these entries.
Note that we only warn the user whey they give a pathspec item that
matches no eligible path for updating, but it does match one or more
SKIP_WORKTREE entries. A warning was chosen over erroring out right away
to reproduce the same behavior `add` already exhibits with ignored
files. This also allow users to continue their workflow without having
to invoke `add` again with only the eligible paths (as those will have
already been added).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new enum parameter to `add_pathspec_matches_against_index()` and
`find_pathspecs_matching_against_index()`, allowing callers to specify
whether these function should attempt to match SKIP_WORKTREE entries or
not. This will be used in a future patch to make `git add` display a
warning when it is asked to update SKIP_WORKTREE entries.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git add --refresh <pathspec>` doesn't find any matches for the
given pathspec, it prints an error message using the `match` field of
the `struct pathspec_item`. However, this field doesn't contain the
magic part of the pathspec. Instead, let's use the `original` field.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `add` encounters an error while applying the --chmod changes, it
prints a message to stderr, but exits with a success code. This might
have been an oversight, as the command does exit with a non-zero code in
other situations where it cannot (or refuses to) update all of the
requested paths (e.g. when some of the given paths are ignored). So make
the exit behavior more consistent by also propagating --chmod errors to
the exit status.
Note: the test "all statuses changed in folder if . is given" uses paths
added by previous test cases, some of which might be symbolic links.
Because `git add --chmod` will now fail with such paths, this test would
depend on whether all the previous tests were executed, or only some
of them. Avoid that by running the test on a fresh repo with only
regular files.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This error message is intended for humans, so mark it for translation.
Also use error() instead of fprintf(stderr, ...), to make the
corresponding line a bit cleaner, and to display the "error:" prefix,
which helps classifying the nature/severity of the message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git add --chmod` applies the mode changes even when `--dry-run` is
used. Fix that and add some tests for this option combination.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many functions take an argv/argc pair, but never actually look at argc.
This makes it useless at best (we use the NULL sentinel in argv to find
the end of the array), and misleading at worst (what happens if the argc
count does not match the argv NULL?).
In each of these instances, the argv NULL does match the argc count, so
there are no bugs here. But let's tighten the interfaces to make it
harder to get wrong (and to reduce some -Wunused-parameter complaints).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have had parallel implementations of "add -i/-p" since 2.25 and
have been using them from various codepaths since 2.26 days, but
never made the built-in version the default.
We have found and fixed a handful of corner case bugs in the
built-in version, and it may be a good time to start switching over
the user base from the scripted version to the built-in version.
Let's enable the built-in version for those who opt into the
feature.experimental guinea-pig program to give wider exposure.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the files in builtin/ to keep the diff to a
manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add builtin/". We'll deal
with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
|
|
advice.addNothing config variable is used to control the visibility of
two advice messages in the add library. This config variable is
replaced by two new variables, whose names are more clear and relevant
to the two cases.
Also add the two new variables to the documentation.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The effort to move "git-add--interactive" to C continues.
* js/patch-mode-in-others-in-c:
commit --interactive: make it work with the built-in `add -i`
built-in add -p: implement the "worktree" patch modes
built-in add -p: implement the "checkout" patch modes
built-in stash: use the built-in `git add -p` if so configured
legacy stash -p: respect the add.interactive.usebuiltin setting
built-in add -p: implement the "stash" and "reset" patch modes
built-in add -p: prepare for patch modes other than "stage"
|
|
Use the advise function in advice.c to display hints to the users, as
it provides a neat and a standard format for hint messages, i.e: the
text is colored in yellow and the line starts by the word "hint:".
Also this will enable us to control the messages using advice.*
configuration variables.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
|
|
A few more commands learned the "--pathspec-from-file" command line
option.
* am/pathspec-f-f-checkout:
checkout, restore: support the --pathspec-from-file option
doc: restore: synchronize <pathspec> description
doc: checkout: synchronize <pathspec> description
doc: checkout: fix broken text reference
doc: checkout: remove duplicate synopsis
add: support the --pathspec-from-file option
cmd_add: prepare for next patch
|
|
This is a straight-forward port of 2f0896ec3ad4 (restore: support
--patch, 2019-04-25) which added support for `git restore -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch teaches the built-in `git add -p` machinery all the tricks it
needs to know in order to act as the work horse for `git checkout -p`.
Apart from the minor changes (slightly reworded messages, different
`diff` and `apply --check` invocations), it requires a new function to
actually apply the changes, as `git checkout -p` is a bit special in
that respect: when the desired changes do not apply to the index, but
apply to the work tree, Git does not fail straight away, but asks the
user whether to apply the changes to the worktree at least.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As `git add` traditionally did not expose the `--patch=<mode>` modes via
command-line options, the scripted version of `git stash` had to call
`git add--interactive` directly.
But this prevents the built-in `add -p` from kicking in, as
`add--interactive` is the scripted version (which does not have a
"fall-back" to the built-in version).
So let's introduce support for internal switch for `git add` that the
scripted `git stash` can use to call the appropriate backend (scripted
or built-in, depending on `add.interactive.useBuiltin`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `git stash` and `git reset` commands support a `--patch` option, and
both simply hand off to `git add -p` to perform that work. Let's teach
the built-in version of that command to be able to perform that work, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl script backing `git add -p` is used not only for that command,
but also for `git stash -p`, `git reset -p` and `git checkout -p`.
In preparation for teaching the C version of `git add -p` to support
also the latter commands, let's abstract away what is "stage" specific
into a dedicated data structure describing the differences between the
patch modes.
Finally, please note that the Perl version tries to make sure that the
diffs are only generated for the modified files. This is not actually
necessary, as the calls to Git's diff machinery already perform that
work, and perform it well. This makes it unnecessary to port the
`FILTER` field of the `%patch_modes` struct, as well as the
`get_diff_reference()` function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64aff (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and after seeing whether the `k` and `j` commands are applicable, in the
C version we remember which previous/next hunk was undecided, and use it
rather than looking again when the user asked to jump).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
While it is tempting to use this conversion of `git add -p` as an excuse
to work on `apply_all_patches()` so that it does _not_ want to read a
file from `stdin` or from a file, but accepts, say, an `strbuf` instead,
we will refrain from this particular rabbit hole at this stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--interactive/--patch/--edit`, even when <file> is not `stdin`.
Such use case it not really expected. Also, it would require changes
to `interactive_add()` and `edit_patch()`.
2) It is not allowed to pass pathspec in both args and file.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Derrick Stolee
René Scharfe
Ævar Arnfjörð Bjarmason
Ben Boeckel
Øystein Walle
Matheus Tavares
Jeff King
Elijah Newren
Denton Liu
Heba Waly
Johannes Schindelin
Alexandr Miloslavskiy