| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* nd/diff-i-t-a:
Revert "diff-lib.c: adjust position of i-t-a entries in diff"
|
|
This reverts commit d95d728aba06a34394d15466045cbdabdada58a2.
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
git add -N file
git diff --cached file | git apply --cached --whitespace=fix
git checkout file
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -e" did not allow the user to abort the operation by
killing the editor.
* jk/add-e-kill-editor:
add: check return value of launch_editor
|
|
When running "add -e", if launching the editor fails, we do
not notice and continue as if the output is what the user
asked for. The likely case is that the editor did not touch
the contents at all, and we end up adding everything.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add foo bar" adds neither foo nor bar when bar is ignored, but dies
to let the user recheck their command invocation. This becomes less
helpful when "git add foo.*" is subject to shell expansion and some of
the expanded files are ignored.
"git add --ignore-errors" is supposed to ignore errors when indexing
some files and adds the others. It does ignore errors from actual
indexing attempts, but does not ignore the error "file is ignored" as
outlined above. This is unexpected.
Change "git add foo bar" to add foo when bar is ignored, but issue
a warning and return a failure code as before the change.
That is, in the case of trying to add ignored files we now act the same
way (with or without "--ignore-errors") in which we act for more
severe indexing errors when "--ignore-errors" is specified.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fr/add-interactive-argv-array:
add: use struct argv_array in run_add_interactive()
|
|
run_add_interactive() in builtin/add.c manually computes array bounds
and allocates a static args array to build the add--interactive command
line, which is error-prone. Use the argv-array helper functions instead.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add <pathspec>" is the same as "git add -A <pathspec>" now,
i.e. it does not ignore removals from the directory specified.
|
|
"git add -u" and "git add -A" without any pathspec is a tree-wide
operation now, even when they are run in a subdirectory of the
working tree.
|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -A" (no other arguments) in a totally empty working tree
used to emit an error.
* nd/add-empty-fix:
add: don't complain when adding empty project root
|
|
This behavior was added in 07d7bed (add: don't complain when adding
empty project root - 2009-04-28) then broken by 84b8b5d (remove
match_pathspec() in favor of match_pathspec_depth() -
2013-07-14). Reinstate it.
Noticed-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fc/trivial:
pull: use $curr_branch_short more
add: trivial style cleanup
reset: trivial style cleanup
branch: trivial style fix
reset: trivial refactoring
|
|
Use "struct pathspec" interface in more places, instead of array of
characters, the latter of which cannot express magic pathspecs
(e.g. ":(icase)makefile" that matches both Makefile and makefile).
* nd/magic-pathspec:
add: lift the pathspec magic restriction on "add -p"
pathspec: catch prepending :(prefix) on pathspec with short magic
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Since 480ca64 (convert run_add_interactive to use struct pathspec -
2013-07-14), we have unconditionally passed :(prefix)xxx to
add-interactive.perl. It implies that all commands
add-interactive.perl calls must be aware of pathspec magic, or
:(prefix) is barfed. The restriction to :/ only becomes unnecessary.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A finishing touch to fix breakage to "add -e" caused by defaulting
ui.color to "auto".
* mm/color-auto-default:
git add -e: Explicitly specify that patch should have no color
|
|
After 4c7f1819 (make color.ui default to 'auto', 2013-06-10), the
patch file to be edited during 'git add -e' receives all the color
codes. This is because diffopt.use_color defaults to -1, which
causes want_color to now return 'auto'.
By explicitly setting use_color to 0, we can ensure the diff output
has no color codes in it.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This passes the pathspec, more or less unmodified, to
git-add--interactive. The command itself does not process pathspec. It
simply passes the pathspec to other builtin commands. So if all those
commands support pathspec, we're good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As promised in 0fa2eb530fb7 (add: warn when -u or -A is used without
pathspec, 2013-01-28), in Git 2.0, "git add -u/-A" that is run
without pathspec in a subdirectory updates all updated paths in the
entire working tree, not just the current directory and its
subdirectories.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce "--ignore-removal" as a synonym to "--no-all" for "git
add", and improve the 2.0 migration warning with it.
* jc/add-ignore-removal:
git add: rephrase -A/--no-all warning
git add: --ignore-removal is a better named --no-all
|
|
* jc/warn-pathless-add-finishing-touches:
git add: avoid "-u/-A without pathspec" warning on stat-dirty paths
|
|
In preparation for Git 2.0, "git add -u/-A" without pathspec checks
all the working tree (not limited to the current directory) and
issues a warning when it finds any path that we might add in Git
2.0, because that would mean the users' fingers need to be trained
to explicitly say "." if they want to keep the current behaviour.
However, the check was incomplete, because "git add" usually does
not refresh the index, considers a path that is stat-dirty but has
contents that is otherwise up-to-date in the index as "we might
add", and relies on that it is a no-op to add the same thing again
via the add_file_to_index() API (which also knows not to say "added"
in verbose mode when this happens). We do not want to trigger the
warning for a path that is outside the current directory is merely
stat-dirty, as it won't be added in Git 2.0, either.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Fixes a handful of issues in the code to traverse working tree to
find untracked and/or ignored files, cleans up and optimizes the
codepath in general.
* kb/status-ignored-optim-2:
dir.c: git-status --ignored: don't scan the work tree twice
dir.c: git-status --ignored: don't scan the work tree three times
dir.c: git-status: avoid is_excluded checks for tracked files
dir.c: replace is_path_excluded with now equivalent is_excluded API
dir.c: unify is_excluded and is_path_excluded APIs
dir.c: move prep_exclude
dir.c: factor out parts of last_exclude_matching for later reuse
dir.c: git-clean -d -X: don't delete tracked directories
dir.c: make 'git-status --ignored' work within leading directories
dir.c: git-status --ignored: don't list empty directories as ignored
dir.c: git-ls-files --directories: don't hide empty directories
dir.c: git-status --ignored: don't list empty ignored directories
dir.c: git-status --ignored: don't list files in ignored directories
dir.c: git-status --ignored: don't drop ignored directories
|
|
Make "git add <pathspec>..." notice paths that have been removed
from the working tree, i.e. the same as "git add -A <pathspec>...".
Given that "git add <pathspec>" is to update the index with the
state of the named part of the working tree as a whole, it makes it
more intuitive, and also makes it possible to simplify the advice we
give while marking the paths the user finished resolving conflicts
with. We used to say "to record removal as a resolution, remove the
path from the working tree and say 'git rm'; for all other cases,
edit the path in the working tree and say 'git add'", but we can now
say "update the path in the working tree and say 'git add'" instead.
As promised, this merges the temporary update_files_in_cache() helper
function back to add_files_to_cache() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now we have a synonym --ignore-removal for --no-all, we can rephrase
the Git 2.0 transition warning message in a more natural way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the historical context of "git add --all ." that pays attention
to "all kinds of changes" (implying "without ignoring removals"),
the option to countermand it "--no-all" may have made sense, but
because we will be making "--all" the default when a pathspec is
given, it makes more sense to rename the option to a more explicit
"--ignore-removal". The "--all" option naturally becomes its
negation, "--no-ignore-removal".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparatory steps to make "git add <pathspec>" take notice of
removed paths that match <pathspec> by default in Git 2.0.
* 'jc/add-2.0-delete-default' (early part):
git add: rephrase the "removal will cease to be ignored" warning
git add: rework the logic to warn "git add <pathspec>..." default change
git add: start preparing for "git add <pathspec>..." to default to "-A"
builtin/add.c: simplify boolean variables
|
|
Now the logic to decide when to warn has been tightened, we know the
user is in a situation where the current and future behaviours will
be different. Spell out what happens with these two versions and
how to explicitly ask for the behaviour, and suggest "git status" as
a way to inspect the current status.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier logic to warn against "git add subdir" that is run
without "-A" or "--no-all" was only to check any <pathspec> given
exactly spells a directory name that (still) exists on the
filesystem. This had number of problems:
* "git add '*dir'" (note that the wildcard is hidden from the
shell) would not trigger the warning.
* "git add '*.py'" would behave differently between the current
version of Git and Git 2.0 for the same reason as "subdir", but
would not trigger the warning.
* "git add dir" for a submodule "dir" would just update the index
entry for the submodule "dir" without ever recursing into it, and
use of "-A" or "--no-all" would matter. But the logic only
checks the directory-ness of "dir" and gives an unnecessary
warning.
Rework the logic to detect the case where the behaviour will be
different in Git 2.0, and issue a warning only when it matters.
Even with the code before this warning, "git add subdir" will have
to traverse the directory in order to find _new_ files the index
does not know about _anyway_, so we can do this check without adding
an extra pass to find if <pathspec> matches any removed file.
This essentially updates the "add_files_to_cache()" public API to
"update_files_in_cache()" API that is internal to "git add", because
with the "--all" option, the function is no longer about "adding"
paths to the cache, but is also used to remove them.
There are other callers of the former from "checkout" (used when
"checkout -m" prepares the temporary tree that represents the local
modifications to be merged) and "commit" ("commit --include" that
picks up local changes in addition to what is in the index). Since
ADD_CACHE_IGNORE_ERRORS (aka "--no-all") is not used by either of
them, once dust settles after Git 2.0 and the warning becomes
unnecessary, we may want to unify these two functions again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of the recent similar change for 'git add -u', avoid
pestering users that restrict their attention to a subdirectory and
will not be affected by the coming change in the behavior of pathless
'git add -A'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common workflow in large projects is to chdir into a subdirectory of
interest and only do work there:
cd src
vi foo.c
make test
git add -u
git commit
The upcoming change to 'git add -u' behavior would not affect such a
workflow: when the only changes present are in the current directory,
'git add -u' will add all changes, and whether that happens via an
implicit "." or implicit ":/" parameter is an unimportant
implementation detail.
The warning about use of 'git add -u' with no pathspec is annoying
because it seemingly serves no purpose in this case. So suppress the
warning unless there are changes outside the cwd that are not being
added.
A previous version of this patch ran two I/O-intensive diff-files
passes: one to find changes outside the cwd, and another to find
changes to add to the index within the cwd. This version runs one
full-tree diff and decides for each change whether to add it or warn
and suppress it in update_callback. As a result, even on very large
repositories "git add -u" will not be significantly slower than the
future default behavior ("git add -u :/"), and the slowdown relative
to "git add -u ." should be a useful clue to users of such
repositories to get into the habit of explicitly passing '.'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make warn_pathless_add() print its warning the first time it is called
and do nothing if called again. This will make it easier to show the
warning on the fly when a relevant condition is detected without
risking showing it multiple times when multiple such conditions hold.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the commands give an actual output (e.g. when ran with -v), the
output is visually mixed with the warning.
An additional blank line makes the actual output more visible.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Nguyễn Thái Ngọc Duy
Alex Henrie
Michael J Gruber
Michael Haggerty
René Scharfe
Fabian Ruch
Felipe Contreras
Andrew Wong
Karsten Blees
Jonathan Nieder
Matthieu Moy