| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/alternate-push:
push: receiver end advertises refs from alternate repositories
push: prepare sender to receive extended ref information from the receiver
receive-pack: make it a builtin
is_directory(): a generic helper function
|
|
In case it's NULL, it is still determined automatically, but now you
have the ability to specify one yourself.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a good thing to do in general, but more importantly, transport
routines can only be used by built-ins, which is what I'll be adding next.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch introduces a modified Damerau-Levenshtein algorithm into
Git's code base, and uses it with the following penalties to show some
similar commands when an unknown command was encountered:
swap = 0, insertion = 1, substitution = 2, deletion = 4
A typical output would now look like this:
$ git sm
git: 'sm' is not a git-command. See 'git --help'.
Did you mean one of these?
am
rm
The cut-off is at similarity rating 6, which was empirically determined
to give sensible results.
As a convenience, if there is only one candidate, Git continues under
the assumption that the user mistyped it. Example:
$ git reabse
WARNING: You called a Git program named 'reabse', which does
not exist.
Continuing under the assumption that you meant 'rebase'
[...]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit daa0cc9a92c9c2c714aa5f7da6d0ff65b93e0698.
It was a stupid idea to do this; when run as a log-in shell,
it is spawned with argv[0] set to "-git-shell", so the usual
name-based dispatch would not work to begin with.
|
|
This trivially makes "git-shell" a built-in. It makes the executable even
fatter, though.
And MinGW removed git-shell only because of the funny dependencies; there
is no reason to do so anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
See for example, status and show commands. Besides,
Documentation/RelNotes-1.6.0.txt mentions that pager.<cmd>
can be used to enable/disable paging behavior per command.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all functionality (except option parsing) from cmd_commit_tree() to
commit_tree(), so that other builtins can use it without a child
process.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move all functionality (except config and option parsing) from
cmd_fmt_merge_msg() to fmt_merge_msg(), so that other builtins can use
it without a child process.
All functions have been changed to use strbufs, and now only
cmd_fmt_merge_msg() reads directly from a file / writes anything to
stdout.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's main usage pages did not show "git help" as a way to get more
information on a specific subcommand. This patch adds an info line after
the list of git commands currently printed by "git", "git help", "git
--help" and "git help --all".
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/mailinfo:
mailsplit: minor clean-up in read_line_with_nul()
mailinfo: apply the same fix not to lose NULs in BASE64 and QP codepaths
mailsplit and mailinfo: gracefully handle NUL characters
|
|
The function fgets() has a big problem with NUL characters: it reads
them, but nobody will know if the NUL comes from the file stream, or
was appended at the end of the line.
So implement a custom read_line_with_nul() function.
Noticed by Tommy Thorn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to Johannes Schindelin for various comments and improvements,
including supporting cloning full bundles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
|
|
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes write_tree_from_memory(), which writes the active cache as
a tree and returns the struct tree for it, available to other code. It
also makes available merge_trees(), which does the internal merge of
two trees with a known base, and merge_recursive(), which does the
recursive internal merge of two commits with a list of common
ancestors.
The first two of these will be used by checkout -m, and the third is
presumably useful in general, although the implementation of checkout
-m which entirely matches the behavior of the shell version does not
use it (since it ignores the difference of ancestry between the old
branch and the new branch).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
|
|
The original "rewrite in C" did somewhat a sloppy job while
stealing code from git-write-tree.
The caller pretends as if the write_tree() function would return
an error code and being able to issue a sensible error message
itself, but write_tree() function just calls die() and never
returns an error. Worse yet, the function claims that it was
running git-write-tree (which is no longer true after
cherry-pick stole it).
Tested-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
|
|
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
|
|
* sb/clean:
Teach git clean to use setup_standard_excludes()
git-clean: Fix error message if clean.requireForce is not set.
Make git-clean a builtin
|
|
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
|
|
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This turns the extern functions to be provided by the backend into a
struct of pointers, renames the functions to be more
namespace-friendly, and updates http-fetch to this interface. It
removes the unused include from http-push.c. It makes git-http-fetch a
builtin (with the implementation a separate file, accessible
directly).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An implementation easier to call from builtins. It is designed
to be used from the upcoming builtin-tag.c and builtin-commit.c,
because both need to remove unwanted spaces from messages.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now the implementation gets more memory to store completely
each line before removing trailing spaces, and does it right
when the last line of the file ends with spaces and no newline
at the end.
Function stripspace needs again to be non-static in order to call
it from "builtin-tag.c" and the upcoming "builtin-commit.c".
A new parameter skip_comments was also added to the stripspace
function to optionally strips every shell #comment from the input,
needed for doing this task on those programs.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/bundle:
bundle: reword missing prerequisite error message
git-bundle: record commit summary in the prerequisite data
git-bundle: fix 'create --all'
git-bundle: avoid fork() in verify_bundle()
git-bundle: assorted fixes
Add git-bundle: move objects and references by archive
|
|
* np/types: (253 commits)
get rid of lookup_object_type()
convert object type handling from a string to a number
formalize typename(), and add its reverse type_from_string()
sha1_file.c: don't ignore an error condition in sha1_loose_object_info()
sha1_file.c: cleanup "offset" usage
sha1_file.c: cleanup hdr usage
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
...
|
Christian Couder
Shawn O. Pearce
Miklos Vajna
Junio C Hamano
Johannes Schindelin
Alex Riesen
Teemu Likonen
Daniel Barkalow
Kristian Høgsberg
Thomas Harning
Shawn Bohrer
Scott R Parish
Carlos Rica
Fernando J. Pereda
Junio C Hamano
James Bowes