| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* maint:
git-name-rev: don't use printf without format
|
|
printf() without an explicit format string is not a good coding practise,
unless the printed string is guaranteed to not contain percent signs. While
fixing this, we might as well combine the calls to fwrite() and printf().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-name-rev: allow --name-only in combination with --stdin
builtin-name-rev.c: split deeply nested part from the main function
Conflicts:
Documentation/git-name-rev.txt
|
|
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main function of this command implementation tries to do too many
things. Split out a handling of single input line into a separate
function to reduce nesting level and clutter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-for-each-ref.txt: minor improvements
name-rev: Fix segmentation fault when using --all
|
|
In commit da2478db "describe --always: fall back to showing an
abbreviated object name" we lost the check that skips empty entries in
the object hash table when iterating over it in cmd_name_rev. That may
cause a NULL pointer being handed to show_name(), leading to a
segmentation fault. So add that check back again.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers may find it useful if "git describe" always gave back a
string that can be used as a shorter name for a commit object, rather than
checking its exit status (while squelching its error message, which could
potentially talk about more grave errors that should not be squelched) and
implementing a fallback themselves.
This teaches describe/name-rev a new option, --always, to use an
abbreviated object name when no tags or refs to use is found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rework get_rev_name to return NULL rather than "undefined" when a
reference is undefined. If --undefined is passed (default), git-name-rev
prints "undefined" for the name, else it die()s.
Make git-describe use --no-undefined when calling git-name-rev so
that --contains behavior matches the standard git-describe one.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Uwe Kleine-König noticed that under certain circumstances, name-rev
picked a non-optimal tag. Jeff King analyzed that name-rev only
takes into account the number of merge traversals, and then the
_last_ number in the description.
As an easy way to fix it, use a weighting factor for merge traversals:
A merge traversal is now made 65535 times more expensive than a
first-parent traversal.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
fix memory leak in parse_object when check_sha1_signature fails
name-rev: tolerate clock skew in committer dates
Update bash completion for git-config options
Teach bash completion about recent log long options
Teach bash completion about 'git remote update'
Update bash completion header documentation
Remove a duplicate --not option in bash completion
Teach bash completion about git-shortlog
Hide the plumbing diff-{files,index,tree} from bash completion
Update bash completion to ignore some more plumbing commands
|
|
In git.git repository, "git-name-rev v1.3.0~158" cannot name the
rev, while adjacent revs can be named.
This was because it gives up traversal from the tips of existing
refs as soon as it sees a commit that has older commit timestamp
than what is being named. This is usually a good heuristics,
but v1.3.0~158 has a slightly older commit timestamp than
v1.3.0~157 (i.e. it's child), as these two were made in a
separate repostiory (in fact, in a different continent).
This adds a hardcoded slop value (1 day) to the cut-off
heuristics to work this kind of problem around. The current
algorithm essentially runs around from the available tips down
to ancient commits and names every single rev available that are
newer than cut-off date, so a single day slop would not add that
much overhead in repositories with long enough history where the
performance of name-rev matters.
I think the algorithm could be made a bit smarter by deepening
the graph on demand as a new commit is asked to be named (this
would require rewriting of name_rev() function not to recurse
itself but use a traversal list like revision.c traverser does),
but that would be a separate issue.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Often users want to know not which tagged version a commit came
after, but which tagged version a commit is contained within.
This latter task is the job of git-name-rev, but most users are
looking to git-describe to do the job.
Junio suggested we make `git describe --contains` run the correct
tool, `git name-rev`, and that's exactly what we do here. The output
of name-rev was adjusted slightly through the new --name-only option,
allowing describe to execv into name-rev and maintain its current
output format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When using git name-rev on my kernel tree I triggered a malloc()
corruption warning from glibc.
apw@pinky$ git log --pretty=one $N/base.. | git name-rev --stdin
*** glibc detected *** malloc(): memory corruption: 0x0bff8950 ***
Aborted
This comes from name_rev() which is building the name of the revision
in a malloc'd string, which it sprintf's into:
char *new_name = xmalloc(len + 8);
[...]
sprintf(new_name, "%.*s~%d^%d", len, tip_name,
generation, parent_number);
This allocation is only sufficient if the generation number is
less than 5 digits, in my case generation was 13432. In reality
parent_number can be up to 16 so that also can require two digits,
reducing us to 3 digits before we are at risk of blowing this
allocation.
This patch introduces a decimal_length() which approximates the
number of digits a type may hold, it produces the following:
Type Longest Value Len Est
---- ------------- --- ---
unsigned char 256 3 4
unsigned short 65536 5 6
unsigned long 4294967296 10 11
unsigned long long 18446744073709551616 20 21
char -128 4 4
short -32768 6 6
long -2147483648 11 11
long long -9223372036854775808 20 21
This is then used to size the new_name.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/name-rev-fix:
name-rev: avoid "^0" when unneeded
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When naming by a tag, we used to add "^0" even if this was not really
necessary. For example, `git name-rev de6f0def` now outputs
de6f0def tags/v1.5.0.1~9
instead of
de6f0def tags/v1.5.0.1^0~9
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Instead of (or, in addition to) --tags, to use only tags for naming,
you can now use --refs=<pattern> to specify a shell glob pattern
which the refs must match to be used for naming.
Example:
$ git name-rev --refs=*v1* 33db5f4d
33db5f4d tags/v1.0rc1^0~1593
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Matthias Kestenholz <matthias@spinlock.ch>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
René Scharfe
Pieter de Bie
Stephan Beyer
Björn Steinbrink
Johannes Schindelin
Pierre Habouzit
Junio C Hamano
Shawn O. Pearce
Andy Whitcroft
David Rientjes
Matthias Kestenholz