| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* mv/merge-noff:
builtin-commit: use reduce_heads() only when appropriate
Conflicts:
builtin-commit.c
t/t7600-merge.sh
|
|
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* mv/merge-refresh:
builtin-merge: refresh the index before calling a strategy
|
|
* maint:
builtin-apply: fix typo leading to stack corruption
git-stash.sh: fix flawed fix of invalid ref handling (commit da65e7c1)
builtin-merge.c: allocate correct amount of memory
Makefile: do not set NEEDS_LIBICONV for Solaris 8
rebase -i: remove leftover debugging
rebase -i: proper prepare-commit-msg hook argument when squashing
|
|
Fix two memory allocation errors which allocate space for a pointer
rather than enough space for the structure itself.
This:
struct commit_list *parent = xmalloc(sizeof(struct commit_list *));
should have been this:
struct commit_list *parent = xmalloc(sizeof(struct commit_list));
But while we're at it, change the allocation to reference the
variable it is allocating memory for to try to prevent a similar
mistake, for example if the type is changed, in the future.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Many call sites immediately initialize allocated memory with zero after
calling xmalloc. A single call to xcalloc can replace this two-call
sequence.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Since commit 6bb6b034 (builtin-commit: use commit_tree(), 2008-09-10),
builtin-commit performs a reduce_heads() unconditionally. However,
it's not always needed, and in some cases even harmful.
reduce_heads() is not needed for the initial commit or for an
"ordinary" commit, because they don't have any or have only one
parent, respectively.
reduce_heads() must be avoided when 'git commit' is run after a 'git
merge --no-ff --no-commit', otherwise it will turn the
non-fast-forward merge into fast-forward. For the same reason,
reduce_heads() must be avoided when amending such a merge commit.
To resolve this issue, 'git merge' will write info about whether
fast-forward is allowed or not to $GIT_DIR/MERGE_MODE. Based on this
info, 'git commit' will only perform reduce_heads() when it's
committing a merge and fast-forward is enabled.
Also add test cases to ensure that non-fast-forward merges are
committed and amended properly.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In case a file is touched but has no real changes then we just have to
update the index and should not error out.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* mv/merge-recursive:
builtin-merge: release the lockfile in try_merge_strategy()
merge-recursive: get rid of virtual_id
merge-recursive: move current_{file,directory}_set to struct merge_options
merge-recursive: move the global obuf to struct merge_options
merge-recursive: get rid of the index_only global variable
merge-recursive: move call_depth to struct merge_options
cherry-pick/revert: make direct internal call to merge_tree()
builtin-merge: avoid run_command_v_opt() for recursive and subtree
merge-recursive: introduce merge_options
merge-recursive.c: Add more generic merge_recursive_generic()
Split out merge_recursive() to merge-recursive.c
|
|
* mv/commit-tree:
t7603: add new testcases to ensure builtin-commit uses reduce_heads()
builtin-commit: use commit_tree()
commit_tree(): add a new author parameter
|
|
* maint:
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
|
|
As the testcase demonstrates, it's possible for split_cmdline to return -1 and
deallocate any memory it's allocated, if the config string is missing an end
quote. In both the cases below, which are the only calling sites, the return
isn't checked, and using the pointer causes a pretty immediate segfault.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In case it's NULL, it is still determined automatically, but now you
have the ability to specify one yourself.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Once we committed the locked index, we should release the lockfile. In
most cases this is done automatically when the process ends, but this is
not true in this case.
[jc: with additional tests from Eric Raible]
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The try_merge_strategy() function always ran the strategy in a separate
process, though this is not always necessary. The recursive and subtree
strategy can be called without a fork(). This patch adds a check, and
calls recursive in the same process without wasting resources.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The statics are always initialized with 0
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just calculate it where it is needed - it is cheap and trivial,
as all the lengths are already there (stored when creating the
command lists).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/merge-custom:
t7606: fix custom merge test
Fix "git-merge -s bogo" help text
Update .gitignore to ignore git-help
Builtin git-help.
builtin-help: always load_command_list() in cmd_help()
Add a second testcase for handling invalid strategies in git-merge
Add a new test for using a custom merge strategy
builtin-merge: allow using a custom strategy
builtin-help: make some internal functions available to other builtins
Conflicts:
help.c
|
|
|
|
The "trivial merge" codepath wants to optimize itself by making an
internal call to the read-tree machinery, but it does not read the index
before doing so, and the codepath is never exercised. Incidentally, this
failure to read the index upfront means that the safety to refuse doing
anything when the index is unmerged does not kick in, either.
These two problem are fixed by using read_cache_unmerged() that does read
the index before checking if it is unmerged at the beginning of
cmd_merge().
The primary logic of the merge, however, assumes that the process never
reads the index in-core, and the call to write_cache_as_tree() it makes
from write_tree_trivial() will always read from the on-disk index that is
prepared the strategy back-ends. This assumption is now broken by the
above fix. To fix this issue, we now call discard_cache() before calling
write_tree_trivial() when it wants to write the on-disk index as a tree.
When multiple strategies are tried, their results are evaluated by reading
the resulting index and inspecting it. The codepath needs to make a call
to read_cache() for each successful strategy, and for that to work, they
need to discard_cache() the one read by the previous round.
Also the "trivial merge" forgot that the current commit is one of the
parents of the resulting commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A squash merge into an unborn branch could be implemented by building the
index from the merged-from branch, and doing a single commit, but this is
not supported yet.
A non-fast-forward merge into an unborn branch does not make any sense,
because you cannot make a merge commit if you don't have a commit to use
as the parent.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make much sense to reuse the output code from "git help" to
show the list of commands to the standard output while giving the error
message before that to the standard error stream. This makes the output
consistent to that of the 1.6.0 version of "git merge".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used to refresh the index to clear stat-dirtyness before a fast-forward
merge. Recent C rewrite forgot to do this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When merging an early part of a branch, e.g. "git merge xyzzy~20", we were
supposed to say "branch 'xyzzy' (early part)", but it incorrectly said
"branch 'refs/heads/xy' (early part)" instead.
The logic was supposed to first strip away "~20" part to make sure that
what follows "~" is a non-zero posint, prefix it with "refs/heads/" and
ask resolve_ref() if it is a ref. If it is, then we know xyzzy was a
branch, and we can give the correct message.
However, there were a few bugs. First of all, the logic to build this
"true branch refname" did not count the characters correctly. At this
point of the code, "len" is the number of trailing, non-name part of the
given extended SHA-1 expression given by the user, i.e. number of bytes in
"~20" in the above example.
In addition, the message forgot to skip "refs/heads/" it prefixed from the
output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow using a custom strategy, as long as it's named git-merge-foo. The
error handling is now done using is_git_command(). The list of available
strategies is now shown by list_commands().
If an invalid strategy is supplied, like -s foobar, then git-merge would
list all git-merge-* commands. This is not perfect, since for example
git-merge-index is not a valid strategy.
These are removed from the output by scanning the list of main commands;
if the git-merge-foo command is listed in the all_strategy list, then
it's shown, otherwise excluded. This does not exclude commands somewhere
else in the PATH, where custom strategies are expected.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parameter that is eventually passed to read_directory() to scan the
working tree should be properly initialized.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git merge -s foobar' diagnosed invalid "foobar" strategy and errored out
with a message, but foobar in pull.twohead or pull.octopus was just
silently ignored. This makes invalid strategy both on the command line
and in the configuration file to trigger the same error.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now "git merge -m" needs a message, and errors out with the usage
text if none is given.
This way, t7600-merge.sh is fixed.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'recur' co-existed with 'recursive' when rewriting it in C, but it no
longer available. 'stupid' was also recently removed.
"git merge -s confused origin" still includes them in the list of
available merge strategies.
[jc: this is a squash of two micropatches]
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
|
|
The command forgot the configuration variable when rewritten in C.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Brandon Casey
Shawn O. Pearce
Miklos Vajna
Deskin Miller
Alex Riesen
Paolo Bonzini
Stephan Beyer
Pierre Habouzit
Michele Ballabio