summaryrefslogtreecommitdiff
path: root/builtin-init-db.c
AgeCommit message (Collapse)AuthorFilesLines
2009-01-05remove trailing LF in die() messagesLibravatar Alexander Potashev1-1/+1
LF at the end of format strings given to die() is redundant because die already adds one on its own. Signed-off-by: Alexander Potashev <aspotashev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-08git init: --bare/--shared overrides system/global configLibravatar Deskin Miller1-2/+10
If core.bare or core.sharedRepository are set in /etc/gitconfig or ~/.gitconfig, then 'git init' will read the values when constructing a new config file; reading them, however, will override the values specified on the command line. In the case of --bare, this ends up causing a segfault, without the repository being properly initialised; in the case of --shared, the permissions are set according to the existing config settings, not what was specified on the command line. This fix saves any specified values for --bare and --shared prior to reading existing config settings, and restores them after reading but before writing the new config file. core.bare is ignored in all situations, while core.sharedRepository will only be used if --shared is not specified to git init. Also includes testcases which use a specified global config file override, demonstrating the former failure scenario. Signed-off-by: Deskin Miller <deskinm@umich.edu> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-15Start conforming code to "git subcmd" style part 3Libravatar Heikki Orsila1-1/+1
User notifications are presented as 'git cmd', and code comments are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'. Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-27init: handle empty "template" parameterLibravatar Jeff King1-0/+2
If a user passes "--template=", then our template parameter is blank. Unfortunately, copy_templates() assumes it has at least one character, and does all sorts of bad things like reading from template[-1] and then proceeding to link all of '/' into the .git directory. This patch just checks for that condition in copy_templates and aborts. As a side effect, this means that --template= now has the meaning "don't copy any templates." Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Merge branch 'sb/dashless'Libravatar Junio C Hamano1-1/+1
* sb/dashless: Make usage strings dash-less t/: Use "test_must_fail git" instead of "! git" t/test-lib.sh: exit with small negagive int is ok with test_must_fail Conflicts: builtin-blame.c builtin-mailinfo.c builtin-mailsplit.c builtin-shortlog.c git-am.sh t/t4150-am.sh t/t4200-rerere.sh
2008-07-13Move code interpreting path relative to exec-dir to new function system_path()Libravatar Steffen Prohaska1-12/+2
Expanding system paths relative to git_exec_path can be used for creating an installation that can be moved to a different directory without re-compiling. We use this approach for template_dir and the system wide gitconfig. The Windows installer (msysgit) is an example for such a setup. This commit moves common code to a new function system_path(). System paths that are to be interpreted relative to git_exec_path are passed to system_path() and the return value is used instead of the original path. system_path() prefixes a relative path with git_exec_path and leaves absolute paths unmodified. For example, we now write template_dir = system_path(DEFAULT_GIT_TEMPLATE_DIR); [j6t: moved from path.c to exec_cmd.c] Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13Make usage strings dash-lessLibravatar Stephan Beyer1-1/+1
When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28git-init: accept --bare optionLibravatar Luciano Rocha1-2/+7
It is unfortunate that "git init --bare" does not work and the only reason why "init" did not learn its own "--bare" option is because "git --bare init" already does the job (and as an option to the git 'potty', it is more generic solution). This teaches "git init" its own "--bare" option, so that both "git --bare init" and "git init --bare" works mostly the same way. [jc: rewrote the log message and added test] Signed-off-by: Luciano Rocha <strange@nsk.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-25Merge branch 'js/config-cb'Libravatar Junio C Hamano1-2/+2
* js/config-cb: Provide git_config with a callback-data parameter Conflicts: builtin-add.c builtin-cat-file.c
2008-05-25Merge branch 'db/clone-in-c'Libravatar Junio C Hamano1-95/+104
* db/clone-in-c: Add test for cloning with "--reference" repo being a subset of source repo Add a test for another combination of --reference Test that --reference actually suppresses fetching referenced objects clone: fall back to copying if hardlinking fails builtin-clone.c: Need to closedir() in copy_or_link_directory() builtin-clone: fix initial checkout Build in clone Provide API access to init_db() Add a function to set a non-default work tree Allow for having for_each_ref() list extra refs Have a constant extern refspec for "--tags" Add a library function to add an alternate to the alternates file Add a lockfile function to append to a file Mark the list of refs to fetch as const Conflicts: cache.h t/t5700-clone-reference.sh
2008-05-14Provide git_config with a callback-data parameterLibravatar Johannes Schindelin1-2/+2
git_config() only had a function parameter, but no callback data parameter. This assumes that all callback functions only modify global variables. With this patch, every callback gets a void * parameter, and it is hoped that this will help the libification effort. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-11git-init: autodetect core.ignorecaseLibravatar Dmitry Potapov1-1/+7
We already detect if symbolic links are supported by the filesystem. This patch adds autodetect for case-insensitive filesystems, such as VFAT and others. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-04Provide API access to init_db()Libravatar Daniel Barkalow1-95/+104
The caller first calls set_git_dir() to specify the GIT_DIR, and then calls init_db() to initialize it. This also cleans up various parts of the code to account for the fact that everything is done with GIT_DIR set, so it's unnecessary to pass the specified directory around. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-16Make core.sharedRepository more genericLibravatar Heikki Orsila1-2/+9
git init --shared=0xxx, where '0xxx' is an octal number, will create a repository with file modes set to '0xxx'. Users with a safe umask value (0077) can use this option to force file modes. For example, '0640' is a group-readable but not group-writable regardless of user's umask value. Values compatible with old Git versions are written as they were before, for compatibility reasons. That is, "1" for "group" and "2" for "everybody". "git config core.sharedRepository 0xxx" is also handled. Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-25init: show "Reinit" message even in an (existing) empty repositoryLibravatar Johannes Schindelin1-2/+3
Earlier, git-init tested for a valid HEAD ref, but if the repository was empty, there was none. Instead, test for the existence of the file $GIT_DIR/HEAD. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-26Merge branch 'maint'Libravatar Junio C Hamano1-21/+0
* maint: Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest timezone_names[]: fixed the tz offset for New Zealand. filter-branch documentation: non-zero exit status in command abort the filter rev-parse: fix potential bus error with --parseopt option spec handling Use a single implementation and API for copy_file() Documentation/git-filter-branch: add a new msg-filter example Correct fast-export file mode strings to match fast-import standard
2008-02-25Use a single implementation and API for copy_file()Libravatar Daniel Barkalow1-21/+0
Originally by Kristian Hï¿œgsberg; I fixed the conversion of rerere, which had a different API. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05Fix misuse of prefix_path()Libravatar Johannes Sixt1-2/+3
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path, init-db made it relative to exec_path using prefix_path(), which is wrong. prefix_path() is about a file inside the work tree. There was a similar misuse in config.c that takes relative ETC_GITCONFIG path. Noticed by Junio C Hamano. We concatenate the paths manually. (prefix_filename() won't do because it expects a prefix with a trailing '/'.) Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-03fix misuse of prefix_path()Libravatar Junio C Hamano1-2/+1
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path, init-db made it relative to exec_path using prefix_path(), which is wrong. prefix_path() is about a file inside the work tree. There was a similar misuse in config.c that takes relative ETC_GITCONFIG path. A convenience function prefix_filename() can concatenate two paths to form a path that points at somewhere outside the work tree. Use it in these codepaths instead. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-11-14Allow a relative builtin template directory.Libravatar Johannes Sixt1-3/+13
In order to make git relocatable (i.e. not have the prefix compiled-in) the template directory must depend on the location where this git instance is found, which is GIT_EXEC_DIR. The exec path is prepended only if the compiled-in default template directory is to be used and that is relative. Any relative directories that are specified via environment variable or the --exec-dir switch are taken as is. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-31git-init: autodetect core.symlinksLibravatar Junio C Hamano1-0/+15
We already autodetect if filemode is reliable on the filesystem to deal with VFAT and friends. Do the same for symbolic link support. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-27Fix initialization of a bare repositoryLibravatar Junio C Hamano1-5/+60
Here is my attempt to fix this with a minimally intrusive patch. * As "git --bare init" cannot tell if it was called with --bare or just "GIT_DIR=. git init", I added an explicit assignment of is_bare_repository_cfg on the codepath for "git --bare". * GIT_WORK_TREE alone without GIT_DIR does not make any sense, nor GIT_WORK_TREE with an explicit "git --bare". Catch that mistake. It might make sense to move this check to "git.c" side as well, but I tried to shoot for the minimum change for now. * Some scripts, especially from the olden days, rely on traditional GIT_DIR behaviour in "git init". Namely, these are some notable patterns: (create a bare repository) - mkdir some.git && cd some.git && GIT_DIR=. git init - mkdir some.git && cd some.git && git --bare init (create a non-bare repository) - mkdir .git && GIT_DIR=.git git init - mkdir .git && GIT_DIR=`pwd`/.git git init This comes with a new test script and also passes the existing test suite, but there may be cases that are still broken with the current tip of master and this patch does not yet fix. I'd appreciate help in straightening this mess out. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01Clean up work-tree handlingLibravatar Johannes Schindelin1-37/+11
The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-04git-init: set core.worktree if GIT_WORK_TREE is specifiedLibravatar Matthias Lederhofer1-3/+37
Now you can do the following to create a repository which has a separate working tree: /tmp/foo$ export GIT_DIR=/tmp/bar /tmp/foo$ git --work-tree . init Initialized empty Git repository in /tmp/bar/ /tmp/foo$ git config core.worktree /tmp/foo Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-27Add an option to quiet git-init.Libravatar Jeffrey C. Ollie1-5/+9
git-init lacks an option to suppress non-error and non-warning output - this patch adds one. Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-26detect close failure on just-written file handlesLibravatar Jim Meyering1-1/+2
I audited git for potential undetected write failures. In the cases fixed below, the diagnostics I add mimic the diagnostics used in surrounding code, even when that means not reporting the precise strerror(errno) cause of the error. Signed-off-by: Jim Meyering <jim@meyering.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-12Remove trailing slash from $(template_dir).Libravatar Johannes Sixt1-1/+1
All the other directory location variables do not have the trailing slash. Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-02-20Mechanical conversion to use prefixcmp()Libravatar Junio C Hamano1-2/+2
This mechanically converts strncmp() to use prefixcmp(), but only when the parameters match specific patterns, so that they can be verified easily. Leftover from this will be fixed in a separate step, including idiotic conversions like if (!strncmp("foo", arg, 3)) => if (!(-prefixcmp(arg, "foo"))) This was done by using this script in px.perl #!/usr/bin/perl -i.bak -p if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) { s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|; } if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) { s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|; } and running: $ git grep -l strncmp -- '*.c' | xargs perl px.perl Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-28add logref support to git-symbolic-refLibravatar Nicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-24Allow default core.logallrefupdates to be overridden with template's configLibravatar Alex Riesen1-1/+3
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-12use 'init' instead of 'init-db' for shipped docs and toolsLibravatar Nicolas Pitre1-1/+1
While 'init-db' still is and probably will always remain a valid git command for obvious backward compatibility reasons, it would be a good idea to move shipped tools and docs to using 'init' instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-07Introduce is_bare_repository() and core.bare configuration variableLibravatar Junio C Hamano1-2/+6
This removes the old is_bare_git_dir(const char *) to ask if a directory, if it is a GIT_DIR, is a bare repository, and replaces it with is_bare_repository(void *). The function looks at core.bare configuration variable if exists but uses the old heuristics: if it is ".git" or ends with "/.git", then it does not look like a bare repository, otherwise it does. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-07"init-db" can really be just "init"Libravatar Nicolas Pitre1-1/+1
Make "init" the equivalent of "init-db". This should make first GIT impression a little more friendly. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-30Force core.filemode to false on Cygwin.Libravatar Shawn O. Pearce1-4/+11
Many users have noticed that core.filemode doesn't appear to be automatically set right on Cygwin when using a repository stored on NTFS. The issue is that Cygwin and NTFS correctly supports the executable mode bit, and Git properly detected that, but most native Windows applications tend to create files such that Cygwin sees the executable bit set when it probably shouldn't be. This is especially bad if the user's favorite editor deletes the file then recreates it whenever they save (vs. just overwriting) as now a file that was created with mode 0644 by checkout-index appears to have mode 0755. So we introduce NO_TRUSTABLE_FILEMODE, settable at compile time. Setting this option forces core.filemode to false, even if the detection code would have returned true. This option should be enabled by default on Cygwin. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-19Use preprocessor constants for environment variable names.Libravatar Junio C Hamano1-1/+1
We broke the discipline Linus set up to allow compiler help us avoid typos in environment names in the early days of git over time. This defines a handful preprocessor constants for environment variable names used in relatively core parts of the system. I've left out variable names specific to subsystems such as HTTP and SSL as I do not think they are big problems. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-19Introduce GIT_TEMPLATE_DIRLibravatar Johannes Schindelin1-2/+5
Instead of passing --template explicitely to init-db and clone, you can just set the environment variable GIT_TEMPLATE_DIR. Also make use of it in the tests, to make sure that the templates are copied. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-15Enable reflogs by default in any repository with a working directory.Libravatar Shawn O. Pearce1-0/+3
New and experienced Git users alike are finding out too late that they forgot to enable reflogs in the current repository, and cannot use the information stored within it to recover from an incorrectly entered command such as `git reset --hard HEAD^^^` when they really meant HEAD^^ (aka HEAD~2). So enable reflogs by default in all future versions of Git, unless the user specifically disables it with: [core] logAllRefUpdates = false in their .git/config or ~/.gitconfig. We only enable reflogs in repositories that have a working directory associated with them, as shared/bare repositories do not have an easy means to prune away old log entries, or may fail logging entirely if the user's gecos information is not valid during a push. This heuristic was suggested on the mailing list by Junio. Documentation was also updated to indicate the new default behavior. We probably should start to teach usuing the reflog to recover from mistakes in some of the tutorial material, as new users are likely to make a few along the way and will feel better knowing they can recover from them quickly and easily, without fsck-objects' lost+found features. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-15Provide more meaningful output from 'git init-db'.Libravatar Shawn O. Pearce1-7/+14
Back in the old days of Git when people messed around with their GIT_DIR environment variable more often it was nice to know whether or not git-init-db created a .git directory or used GIT_DIR. As most users at that time were rather technical UNIXy folk the message "defaulting to local storage area" made sense to some and seemed reasonable. But it doesn't really convey any meaning to the new Git user, as they don't know what a 'local storage area is' nor do they know enough about Git to care. It also really doesn't tell the experienced Git user a whole lot about the command they just ran, especially if they might be reinitializing an existing repository (e.g. to update hooks). So now we print out what we did ("Initialized empty" or "Reinitialized existing"), what type of repository ("" or "shared"), and what location the repository will be in ("$GIT_DIR"). Suggested in part by Andy Parkins in his Git 'niggles' list (<200612132237.10051.andyparkins@gmail.com>). Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-27Merge branch 'master' into lj/refsLibravatar Junio C Hamano1-0/+1
* master: (72 commits) runstatus: do not recurse into subdirectories if not needed grep: fix --fixed-strings combined with expression. grep: free expressions and patterns when done. Corrected copy-and-paste thinko in ignore executable bit test case. An illustration of rev-list --parents --pretty=raw Allow git-checkout when on a non-existant branch. gitweb: Decode long title for link tooltips git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1 Ignore executable bit when adding files if filemode=0. Remove empty ref directories that prevent creating a ref. Use const for interpolate arguments git-archive: update documentation Deprecate merge-recursive.py gitweb: fix over-eager application of esc_html(). Allow '(no author)' in git-svn's authors file. Allow 'svn fetch' on '(no date)' revisions in Subversion. git-repack: allow git-repack to run in subdirectory Remove upload-tar and make git-tar-tree a thin wrapper to git-archive git-tar-tree: Move code for git-archive --format=tar to archive-tar.c git-tar-tree: Remove duplicate git_config() call ...
2006-09-20add receive.denyNonFastforwards config variableLibravatar Johannes Schindelin1-0/+1
If receive.denyNonFastforwards is set to true, git-receive-pack will deny non fast-forwards, i.e. forced updates. Most notably, a push to a repository which has that flag set will fail. As a first user, 'git-init-db --shared' sets this flag, since in a shared setup, you are most unlikely to want forced pushes to succeed. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-17Make ref resolution sanerLibravatar Linus Torvalds1-2/+2
The old code used to totally mix up the notion of a ref-name and the path that that ref was associated with. That was not only horribly ugly (a number of users got the path, and then wanted to try to turn it back into a ref-name again), but it fundamnetally doesn't work at all once we do any setup where a ref doesn't have a 1:1 relationship with a particular pathname. This fixes things up so that we use the ref-name throughout, and only turn it into a pathname once we actually look it up in the filesystem. That makes a lot of things much clearer and more straightforward. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-03Replace some calls to die(usage_str) with usage(usage_str).Libravatar Ramsay Allan Jones1-1/+1
The only change in behaviour should be having a "usage: " prefix on the output string rather than "fatal: ", and an exit code of 129 rather than 128. Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29Call setup_git_directory() much earlierLibravatar Linus Torvalds1-1/+1
This changes the calling convention of built-in commands and passes the "prefix" (i.e. pathname of $PWD relative to the project root level) down to them. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-10shared repository: optionally allow reading to "others".Libravatar Junio C Hamano1-3/+12
This enhances core.sharedrepository to have additionally specify that read and exec permissions to be given to others as well. It is useful when serving a repository via gitweb and git-daemon that runs as a user outside the project group. The configuration item can take the following values: [core] sharedrepository ; the same as "group" sharedrepository = true ; ditto sharedrepository = 1 ; ditto sharedrepository = group ; allow rwx to group sharedrepository = all ; allow rwx to group, allow rx to other sharedrepository = umask ; not shared - use umask It also extends "git init-db" to take "--shared=all" and friends from the command line. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-09shared repository - add a few missing calls to adjust_shared_perm().Libravatar Junio C Hamano1-0/+15
There were a few calls to adjust_shared_perm() that were missing: - init-db creates refs, refs/heads, and refs/tags before reading from templates that could specify sharedrepository in the config file; - updating config file created it under user's umask without adjusting; - updating refs created it under user's umask without adjusting; - switching branches created .git/HEAD under user's umask without adjusting. This moves adjust_shared_perm() from sha1_file.c to path.c, since a few SIMPLE_PROGRAM need to call repository configuration functions which in turn need to call adjust_shared_perm(). sha1_file.c needs to link with SHA1 computation library which is usually not linked to SIMPLE_PROGRAM. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-09builtin-init-db: spell the in-program configuration variable in lowercase.Libravatar Junio C Hamano1-1/+1
Just for consistency -- setup.c spells it in lowercase. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19Builtin git-init-dbLibravatar Timo Hirvonen1-0/+293
Basically this just renames init-db.c to builtin-init-db.c and makes some strings const. Signed-off-by: Timo Hirvonen <tihirvon@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>