| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current code is very inconsistent about which signals
are caught for doing cleanup of temporary files and lock
files. Some callsites checked only SIGINT, while others
checked a variety of death-dealing signals.
This patch factors out those signals to a single function,
and then calls it everywhere. For some sites, that means
this is a simple clean up. For others, it is an improvement
in that they will now properly clean themselves up after a
larger variety of signals.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a piece of code wanted to do some cleanup before exiting
(e.g., cleaning up a lockfile or a tempfile), our usual
strategy was to install a signal handler that did something
like this:
do_cleanup(); /* actual work */
signal(signo, SIG_DFL); /* restore previous behavior */
raise(signo); /* deliver signal, killing ourselves */
For a single handler, this works fine. However, if we want
to clean up two _different_ things, we run into a problem.
The most recently installed handler will run, but when it
removes itself as a handler, it doesn't put back the first
handler.
This patch introduces sigchain, a tiny library for handling
a stack of signal handlers. You sigchain_push each handler,
and use sigchain_pop to restore whoever was before you in
the stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement git-pull --quiet and git-pull --verbose by
adding the options to git-pull and fixing verbosity
handling in git-fetch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-fetch-update-head:
pull: allow "git pull origin $something:$current_branch" into an unborn branch
Fix fetch/pull when run without --update-head-ok
Conflicts:
t/t5510-fetch.sh
|
|
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some confusing tutorials suggested that it would be a good idea to fetch
into the current branch with something like this:
git fetch origin master:master
(or even worse: the same command line with "pull" instead of "fetch").
While it might make sense to store what you want to pull, it typically is
plain wrong when the current branch is "master". This should only be
allowed when (an incorrect) "git pull origin master:master" tries to work
around by giving --update-head-ok to underlying "git fetch", and otherwise
we should refuse it, but somewhere along the lines we lost that behavior.
The check for the current branch is now _only_ performed in non-bare
repositories, which is an improvement from the original behaviour.
Some newer tests were depending on the broken behaviour of "git fetch"
this patch fixes, and have been adjusted.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are basically two categories of update failures for
local refs:
1. problems outside of git, like disk full, bad
permissions, etc.
2. D/F conflicts on tracking branch ref names
In either case, there should already have been an error
message. In case '1', hopefully enough information has
already been given that the user can fix it. In the case of
'2', we can hint that the user can clean up their tracking
branch area by using 'git remote prune'.
Note that we don't actually know _which_ case we have, so
the user will receive the hint in case 1, as well. In this
case the suggestion won't do any good, but hopefully the
user is smart enough to figure out that it's just a hint.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, if there was an error while storing a local
tracking ref, the low-level functions would report an error,
but fetch's status output wouldn't indicate any problem.
E.g., imagine you have an old "refs/remotes/origin/foo/bar" but
upstream has deleted "foo/bar" in favor of a new branch
"foo". You would get output like this:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
* [new branch] foo -> origin/foo
With this patch, the output takes into account the status of
updating the local ref:
error: there are still refs under 'refs/remotes/origin/foo'
From $url_of_repo
! [new branch] foo -> origin/foo (unable to update local ref)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sync with builtin-fetch--tool.c where append_fetch_head()
honors update_local_ref() return value.
This fixes non fast forward fetch exit status,
http://bugzilla.altlinux.org/show_bug.cgi?id=15037
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
|
|
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/fetch-status:
git-fetch: always show status of non-tracking-ref fetches
|
|
The refspec refs/tags/*:refs/tags/* is sufficiently common and generic
to merit having a constant instead of generating it as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported by Dave Jones:
Since master.kernel.org updated to latest, I noticed that I could crash
git-fetch by doing this..
export KERNEL=/pub/scm/linux/kernel/git/
git fetch $KERNEL/torvalds/linux-2.6 master:linus
(gdb) bt
0 0x000000349fd6d44b in free () from /lib64/libc.so.6
1 0x000000000048f4eb in transport_unlock_pack (transport=0x7ce530) at transport.c:811
2 0x000000349fd31b25 in exit () from /lib64/libc.so.6
3 0x00000000004043d8 in handle_internal_command (argc=3, argv=0x7fffea4449f0) at git.c:379
4 0x0000000000404547 in main (argc=3, argv=0x7fffea4449f0) at git.c:443
5 0x000000349fd1c784 in __libc_start_main () from /lib64/libc.so.6
6 0x0000000000403ef9 in ?? ()
7 0x00007fffea4449d8 in ?? ()
8 0x0000000000000000 in ?? ()
I then remembered, my .bashrc has this..
export MALLOC_PERTURB_=$(($RANDOM % 255 + 1))
which is handy for showing up such bugs.
More info on this glibc feature is at http://udrepper.livejournal.com/11429.html
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, a fetch like:
git fetch git://some/url
would show no ref status output (just the object downloading
status, if there was any), leading to some confusion.
With this patch, we now show the usual ref table, with
remote refs going into FETCH_HEAD. Previously this output
was shown only if "-v"erbose was specified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was code in update_local_ref for handling this case,
but it never actually got called. It assumed that storing in
FETCH_HEAD meant a blank peer_ref name, but we actually have
a NULL peer_ref in this case, so we never even made it to
the update_local_ref function.
On top of that, the display formatting was different from
all of the other cases, probably owing to the fact that
nobody had ever actually seen the output.
This patch harmonizes the output with the other cases and
moves the detection of this case into store_updated_refs,
where we can actually trigger it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-fetch encounters the refspec "tag" it assumes that the next
argument will be a tag name. If there is no next argument, it should
die gracefully instead of erroring.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
$ git push ../test.git ':/remote.c: Fix overtight refspec:master'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
merge-file: handle empty files gracefully
merge-recursive: handle file mode changes
Minor wording changes in the keyboard descriptions in git-add --interactive.
git fetch: Take '-n' to mean '--no-tags'
quiltimport: fix misquoting of parsed -p<num> parameter
git-quiltimport: better parser to grok "enhanced" series files.
|
|
Prior to commit 8320199 (Rewrite builtin-fetch option parsing to use
parse_options().), we understood '-n' as a short option to mean "don't
fetch tags from the remote". This patch reinstates behaviour similar,
but not identical to the pre commit 8320199 times.
Back then, -n always overrode --tags, so if both --tags and -n was
given on command-line, no tags were fetched regardless of argument
ordering. Now we use a "last entry wins" strategy, so '-n --tags'
means "fetch tags".
Since it's patently absurd to say both --tags and --no-tags, this
shouldn't matter in practice.
Spotted-by: Artem Zolochevskiy <azol@altlinux.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the remote peer upload-pack process supports the include-tag
protocol extension then we can avoid running a second fetch cycle
on the client side by letting the server send us the annotated tags
along with the objects it is packing for us. In the following graph
we can now fetch both "tag1" and "tag2" on the same connection that
we fetched "master" from the remote when we only have L available
on the local side:
T - tag1 S - tag2
/ /
L - o ------ o ------ B
\ \
\ \
origin/master master
The objects for "tag1" are implicitly downloaded without our direct
knowledge. The existing "quickfetch" optimization within git-fetch
discovers that tag1 is complete after the first connection and does
not open a second connection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the situation is the following on the remote and L is the common
base between both sides:
T - tag1 S - tag2
/ /
L - A - O - O - B
\ \
origin/master master
and we have decided to fetch "master" to acquire the range L..B we
can also nab tag S at the same time during the first connection,
as we can clearly see from the refs advertised by upload-pack that
S^{} = B and master = B.
Unfortunately we still cannot nab T at the same time as we are not
able to see that T^{} will also be in the range implied by L..B.
Such computations must be performed on the remote side (not yet
supported) or on the client side as post-processing (the current
behavior).
This optimization is an extension of the previous one in that it
helps on projects which tend to publish both a new commit and a
new tag, then lay idle for a while before publishing anything else.
Most followers are able to download both the new commit and the new
tag in one connection, rather than two. git.git tends to follow
such patterns with its roughly once-daily updates from Junio.
A protocol extension and additional server side logic would be
necessary to also ensure T is grabbed on the first connection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If autofollowing of tags is enabled, we see a new tag on the remote
that we don't have, and we already have the SHA-1 object that the
tag is peeled to, then we can fetch the tag while we are fetching
the other objects on the first connection.
This is a slight optimization for projects that have a habit of
tagging a release commit after most users have already seen and
downloaded that commit object through a prior fetch session. In
such cases the users may still find new objects in branch heads,
but the new tag will now also be part of the first pack transfer
and the subsequent connection to autofollow tags is not required.
Currently git.git does not benefit from this optimization as any
release usually gets a new commit at the same time that it gets a
new release tag, however git-gui.git and many other projects are
in the habit of tagging fairly old commits.
Users who did not already have the tagged commit still require
opening a second connection to autofollow the tag, as we are unable
to determine on the client side if $tag^{} will be sent to the
client during the first transfer or not. Such computation must be
performed on the remote side of the connection and is deferred to
another series of changes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To support calling find_non_local_tags() more than once in a single
git-fetch process we need the existing_refs to be stack-allocated
so it resets on the second call. We also should free the path
lists to avoid unnecessary memory leaking.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By allowing the function to append onto the end of an existing list
we can do more interesting things, like join the list of tags we
want to fetch into the first fetch, rather than the second.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we ever decided to append onto the end of this list the tail
pointer must be looking at the right memory cell at the end of
the HEAD ref_map.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can free this ref_map as soon as the fetch is complete. It is not
used for the automatic tag following, nor is it used to disconnect the
transport. This avoids some confusion about why we are holding onto
these refs while following tags.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apparently fetch_map is passed through, but is not actually used.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shares the connection between getting the remote ref list and
getting objects in the first batch. (A second connection is still used
to follow tags).
When we do not fetch objects (i.e. either ls-remote disconnects after
getting list of refs, or we decide we are already up-to-date), we
clean up the connection properly; otherwise the connection is left
open in need of cleaning up to avoid getting an error message from
the remote end when ssh is used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This gets a little tricky because of the way --tags and --no-tags
are handled, and the "tag <name>" syntax needs a little hand-holding too.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
|
|
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
|
|
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
|
|
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
|
|
Back in e3c6f240fd9c5bdeb33f2d47adc859f37935e2df Junio taught
git-fetch to avoid copying objects when we are fetching from
a repository that is already registered as an alternate object
database. In such a case there is no reason to copy any objects
as we can already obtain them through the alternate.
However we need to ensure the objects are all reachable, so we
run `git rev-list --objects $theirs --not --all` to verify this.
If any object is missing or unreadable then we need to fetch/copy
the objects from the remote. When a missing object is detected
the git-rev-list process will exit with a non-zero exit status,
making this condition quite easy to detect.
Although git-fetch is currently a builtin (and so is rev-list)
we cannot invoke the traverse_objects() API at this point in the
transport code. The object walker within traverse_objects() calls
die() as soon as it finds an object it cannot read. If that happens
we want to resume the fetch process by calling do_fetch_pack().
To get around this we spawn git-rev-list into a background process
to prevent a die() from killing the foreground fetch process,
thus allowing the fetch process to resume into do_fetch_pack()
if copying is necessary.
We aren't interested in the output of rev-list (a list of SHA-1
object names that are reachable) or its errors (a "spurious" error
about an object not being found as we need to copy it) so we redirect
both stdout and stderr to /dev/null.
We run this git-rev-list based check before any fetch as we may
already have the necessary objects local from a prior fetch. If we
don't then its very likely the first $theirs object listed on the
command line won't exist locally and git-rev-list will die very
quickly, allowing us to start the network transfer. This test even
on remote URLs may save bandwidth if someone runs `git pull origin`,
sees a merge conflict, resets out, then redoes the same pull just
a short time later. If the remote hasn't changed between the two
pulls and the local repository hasn't had git-gc run in it then
there is probably no need to perform network transfer as all of
the objects are local.
Documentation for the new quickfetch function was suggested and
written by Junio, based on his original comment in git-fetch.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Previously git-fetch.sh used `git cat-file -t` to determine if an
object referenced by a tag exists, and if so fetch that tag locally.
This was subtly broken during the port to C based builtin-fetch as
lookup_object() only works to locate an object if it was previously
accessed by the transport. Not all transports will access all
objects in this way, so tags were not always being fetched.
The rsync transport never loads objects into the internal object
table so automated tag following didn't work if rsync was used.
Automated tag following also didn't work on the native transport
if the new tag was behind the common point(s) negotiated between
the two ends of the connection as the tag's referrant would not
be loaded into the internal object table. Further the automated
tag following was broken with the HTTP commit walker if the new
tag's referrant was behind an existing ref, as the walker would
stop before loading the tag's referrant into the object table.
Switching to has_sha1_file() restores the original behavior from
the shell script by checking if the object exists in the ODB,
without relying on the state left behind by a transport.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* np/fetch:
git-fetch: more terse fetch output
|
|
"-q" is the very first option described in the git-fetch manpage, and it
isn't supported.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the fetch output much more terse and prettier on a 80 column
display, based on a consensus reached on the mailing list. Here's an
example output:
Receiving objects: 100% (5439/5439), 1.60 MiB | 636 KiB/s, done.
Resolving deltas: 100% (4604/4604), done.
From git://git.kernel.org/pub/scm/git/git
! [rejected] html -> origin/html (non fast forward)
136e631..f45e867 maint -> origin/maint (fast forward)
9850e2e..44dd7e0 man -> origin/man (fast forward)
3e4bb08..e3d6d56 master -> origin/master (fast forward)
fa3665c..536f64a next -> origin/next (fast forward)
+ 4f6d9d6...768326f pu -> origin/pu (forced update)
* [new branch] todo -> origin/todo
Some portions of this patch have been extracted from earlier proposals
by Jeff King and Shawn Pearce.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the branch named with branch.$name.merge is not covered by
the fetch configuration for the remote repository named with
branch.$name.remote, we automatically add that branch to the set
of branches to be fetched. However, if the remote repository
does not have that branch (e.g. it used to exist, but got
removed), this is not a reason to fail the git-fetch itself.
The situation however will be noticed if git-fetch was called by
git-pull, as the resulting FETCH_HEAD would not have any entry
that is marked for merging.
Acked-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the same bug as 42a32174b600f139b489341b1281fb1bfa14c252.
The warning "Object $X is a tree, not a commit" is bogus and is
not relevant here. If its not a commit we just need to make sure
we don't mark it for merge as we fill out FETCH_HEAD.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
When doing "git fetch <remote>" on a remote that does not have the
branch referenced in branch.<current-branch>.merge, git fetch failed.
It failed because it tried to add the "merge" ref to the refs to be
fetched.
Fix that. And add a test case.
Incidentally, this unconvered a bug in our own test suite, where
"git pull <some-path>" was expected to merge the ref given in the
defaults, even if not pulling from the default remote.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If multiple refspecs matched the same ref, the update would be
processed multiple times. Now having the same destination for the same
source has no additional effect, and having the same destination for
different sources is an error.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
Jeff King
Alexander Potashev
Tuncer Ayaz
Junio C Hamano
René Scharfe
Johannes Schindelin
Heikki Orsila
Stephan Beyer
Dmitry V. Levin
Krzysztof Kowalczyk
Daniel Barkalow
Alex Riesen
Kevin Ballard
Shawn O. Pearce
Kristian Høgsberg
André Goddard Rosa
Pierre Habouzit
Steven Grimm
Nicolas Pitre