| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
is_kept_pack(): final clean-up
Simplify is_kept_pack()
Consolidate ignore_packed logic more
has_sha1_kept_pack(): take "struct rev_info"
has_sha1_pack(): refactor "pretend these packs do not exist" interface
git-repack: resist stray environment variable
Conflicts:
t/t7700-repack.sh
|
|
Most of the callers of this function except only one pass NULL to its last
parameter, ignore_packed.
Introduce has_sha1_kept_pack() function that has the function signature
and the semantics of this function, and convert the sole caller that does
not pass NULL to call this new function.
All other callers and has_sha1_pack() lose the ignore_packed parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new inline function is_dot_or_dotdot is used to check if the
directory name is either "." or "..". It returns a non-zero value if
the given string is "." or "..". It's applicable to a lot of Git
source code.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The non-verbose output was not changed in fdb2a2a (compat: introduce
on_disk_bytes(), 2008-08-18) which caused git-count-objects to claim 512
times too much space used for loose objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/count-objects:
count-objects: Add total pack size to verbose output
|
|
Some platforms do not have st_blocks member in "struct stat"; mingw
already emulates it by rounding it up to closest 512-byte blocks (even
though it could overcount when a file has holes).
The reason to use the member is only to figure out how many kilobytes the
files occupy on-disk, so give a helper function in git-compat-util.h to
compute this value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
Adds the total pack size (including indexes) the verbose count-objects
output, floored to the nearest kilobyte.
Updates documentation to match this addition.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
My earlier lazy index opening patch changed this condition to check
index_data and call open_pack_index if it was NULL. In truth we only
care about num_objects. Since open_pack_index does no harm if the
index is already open, and all indexes are likely to be closed in
this application, the "performance optimization" of inlining the
index_data check here was wrong.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In some repository configurations the user may have many packfiles,
but all of the recent commits/trees/tags/blobs are likely to
be in the most recent packfile (the one with the newest mtime).
It is therefore common to be able to complete an entire operation
by accessing only one packfile, even if there are 25 packfiles
available to the repository.
Rather than opening and mmaping the corresponding .idx file for
every pack found, we now only open and map the .idx when we suspect
there might be an object of interest in there.
Of course we cannot known in advance which packfile contains an
object, so we still need to scan the entire packed_git list to
locate anything. But odds are users want to access objects in the
most recently created packfiles first, and that may be all they
ever need for the current operation.
Junio observed in b867092f that placing recent packfiles before
older ones can slightly improve access times for recent objects,
without degrading it for historical object access.
This change improves upon Junio's observations by trying even harder
to avoid the .idx files that we won't need.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The coming index format change doesn't allow for the number of objects
to be determined from the size of the index file directly. Instead, Let's
initialize a field in the packed_git structure with the object count when
the index is validated since the count is always known at that point.
While at it let's reorder some struct packed_git fields to avoid padding
due to needed 64-bit alignment for some of them.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Recent "git push" keeps transferred objects packed much more aggressively
than before. Monitoring output from git-count-objects -v for number of
loose objects is not enough to decide when to repack -- having too many
small packs is also a good cue for repacking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Incremental repack without -a essentially boils down to:
rev-list --objects --unpacked --all |
pack-objects $new_pack
which picks up all loose objects that are still live and creates
a new pack.
This implements --unpacked=<existing pack> option to tell the
revision walking machinery to pretend as if objects in such a
pack are unpacked for the purpose of object listing. With this,
we could say:
rev-list --objects --unpacked=$active_pack --all |
pack-objects $new_pack
instead, to mean "all live loose objects but pretend as if
objects that are in this pack are also unpacked". The newly
created pack would be perfect for updating $active_pack by
replacing it.
Since pack-objects now knows how to do the rev-list's work
itself internally, you can also write the above example by:
pack-objects --unpacked=$active_pack --all $new_pack </dev/null
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Alexander Potashev
Mikael Magnusson
Marcus Griep
Stephan Beyer
Pierre Habouzit
Shawn O. Pearce
Nicolas Pitre
Junio C Hamano