| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code that calls diff_setup(), including via init_revisions(), should later call
diff_setup_done(), possibly via setup_revisions(). Failure to do so could cause
errors, especially in the future when we add responsibilities to
diff_setup_done(). This instance causes no known errors with the present code.
But it resulted in an error with an experimental patch.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/previous-branch:
t1505: remove debugging cruft
Simplify parsing branch switching events in reflog
Introduce for_each_recent_reflog_ent().
interpret_nth_last_branch(): plug small memleak
Fix reflog parsing for a malformed branch switching entry
Fix parsing of @{-1}@{1}
interpret_nth_last_branch(): avoid traversing the reflog twice
checkout: implement "-" abbreviation, add docs and tests
sha1_name: support @{-N} syntax in get_sha1()
sha1_name: tweak @{-N} lookup
checkout: implement "@{-N}" shortcut name for N-th last branch
Conflicts:
sha1_name.c
|
|
* cb/add-pathspec:
remove pathspec_match, use match_pathspec instead
clean up pathspec matching
|
|
Have '-' mean the same as '@{-1}', i.e., the last branch we were on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the lookup only look at "interesting" checkouts, meaning those
that tell you "Already on ..." don't count even though they also cause
a reflog entry.
Let interpret_nth_last_branch() return the number of characters
parsed, so that git-checkout can verify that the branch spec was
@{-N}, not @{-1}^2 or something like that. (The latter will be added
later.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement a shortcut @{-N} for the N-th last branch checked out, that
works by parsing the reflog for the message added by previous
git-checkout invocations. We expand the @{-N} to the branch name, so
that you end up on an attached HEAD on that branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A function that runs a hook is used in several Git commands.
builtin-commit.c has the one that is most general for cases without
piping. The one in builtin-gc.c prints some useful warnings.
This patch moves a merged version of these variants into libgit and
lets the other builtins use this libified run_hook().
The run_hook() function used in receive-pack.c feeds the standard
input of the pre-receive or post-receive hooks. This function is
renamed to run_receive_hook() because the libified run_hook() cannot
handle this.
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case of
git init
echo exit >.git/hooks/post-checkout
chmod +x .git/hooks/post-checkout
touch foo
git add foo
rm foo
git checkout -- foo
git-checkout resulted in a Segmentation fault, because there is no new
branch set for the post-checkout hook.
This patch makes use of the null SHA as it is set for the old branch.
While at it, I removed the xstrdup() around the sha1_to_hex(...) calls
in builtin-checkout.c/post_checkout_hook() because sha1_to_hex()
uses four buffers for the hex-dumped SHA and we only need two.
(Duplicating one buffer is only needed if we need more than four.)
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both versions have the same functionality. This removes any
redundancy.
This also adds makes two extensions to match_pathspec:
- If pathspec is NULL, return 1. This reflects the behavior of git
commands, for which no paths usually means "match all paths".
- If seen is NULL, do not use it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-do-not-switch-to-non-commit:
git checkout: do not allow switching to a tree-ish that is not a commit
|
|
* jc/maint-do-not-switch-to-non-commit:
git checkout: do not allow switching to a tree-ish that is not a commit
|
|
"git checkout -b newbranch $commit^{tree}" mistakenly created a new branch
rooted at the current HEAD, because in that case, the two structure fields
used to see if the command was invoked without any argument (hence it
needs to default to checking out the HEAD) were populated incorrectly.
Upon seeing a command line argument that we took as a rev, we should store
that string in new.name, even if that does not name a commit. This will
correctly trigger the existing safety logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
sha1_file.c: resolve confusion EACCES vs EPERM
sha1_file: avoid bogus "file exists" error message
git checkout: don't warn about unborn branch if -f is already passed
bash: offer refs instead of filenames for 'git revert'
bash: remove dashed command leftovers
git-p4: fix keyword-expansion regex
fast-export: use an unsorted string list for extra_refs
Add new testcase to show fast-export does not always exports all tags
|
|
I think it's unnecessary to warn that the checkout has been forced due to an
unborn current branch if -f has been explicitly passed. For one project, I am
using git-new-workdir to create workdirs from a bare repository whose HEAD is
set to an unborn branch, and this warning started to irritate me.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start 1.6.0.5 cycle
Fix pack.packSizeLimit and --max-pack-size handling
checkout: Fix "initial checkout" detection
Remove the period after the git-check-attr summary
Conflicts:
RelNotes
|
|
Earlier commit 5521883 (checkout: do not lose staged removal, 2008-09-07)
tightened the rule to prevent switching branches from losing local
changes, so that staged removal of paths can be protected, while
attempting to keep a loophole to still allow a special case of switching
out of an un-checked-out state.
However, the loophole was made a bit too tight, and did not allow
switching from one branch (in an un-checked-out state) to check out
another branch.
The change to builtin-checkout.c in this commit loosens it to allow this,
by not insisting the original commit and the new commit to be the same.
It also introduces a new function, is_index_unborn (and an associated
macro, is_cache_unborn), to check if the repository is truly in an
un-checked-out state more reliably, by making sure that $GIT_INDEX_FILE
did not exist when populating the in-core index structure. A few places
the earlier commit 5521883 added the check for the initial checkout
condition are updated to use this function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: bisect: change a few instances of "git-cmd" to "git cmd"
Documentation: rev-list: change a few instances of "git-cmd" to "git cmd"
checkout: Don't crash when switching away from an invalid branch.
|
|
When using alternates, it is possible for HEAD to end up pointing to
an invalid commit. git checkout should be able to recover from that
situation without crashing.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to complain when -b is not given but an explicit --track/--no-track
override was given from the command line was unchanged on one branch and
reworked on the other branch. The merge result incorrectly kept it.
Spotted by Matt McCutchen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/maint-checkout-b:
Check early that a new branch is new and valid
|
|
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
|
|
* mv/merge-recursive:
builtin-merge: release the lockfile in try_merge_strategy()
merge-recursive: get rid of virtual_id
merge-recursive: move current_{file,directory}_set to struct merge_options
merge-recursive: move the global obuf to struct merge_options
merge-recursive: get rid of the index_only global variable
merge-recursive: move call_depth to struct merge_options
cherry-pick/revert: make direct internal call to merge_tree()
builtin-merge: avoid run_command_v_opt() for recursive and subtree
merge-recursive: introduce merge_options
merge-recursive.c: Add more generic merge_recursive_generic()
Split out merge_recursive() to merge-recursive.c
|
|
* maint:
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
|
|
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* db/maint-checkout-b:
Check early that a new branch is new and valid
|
|
If you fail to update refs to change branches in checkout, your index
and working tree are left already updated. We don't have an easy way
to undo this, but at least we can check things that would make the
creation of a new branch fail. These checks were in the shell version,
and were lost in the C conversion.
The messages are from the shell version, and should probably be made nicer.
[jc: added test to t7201]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-checkout-keep-remove:
checkout: do not lose staged removal
|
|
* jc/maint-checkout-keep-remove:
checkout: do not lose staged removal
|
|
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
|
|
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-checkout-fix:
checkout: do not check out unmerged higher stages randomly
Conflicts:
t/t7201-co.sh
|
|
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
|
|
The shell version of git checkout would print:
Previous HEAD position was 1234abcd... commit subject line
when leaving a detached HEAD for another commit. Ths C
version attempted to implement this, but got the condition
wrong such that the behavior never triggered.
This patch simplifies the conditions for showing the message
to the ones used by the shell version: any time we are
leaving a detached HEAD and the new and old commits are not
the same (this suppresses it for the "git checkout -b new"
case recommended when you enter the detached state).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new option does essentially the same thing as -m option when checking
unmerged paths out of the index, but it uses the specified style instead
of configured merge.conflictstyle.
Setting "merge.conflictstyle" to "diff3" is usually less useful than using
the default "merge" style, because the latter allows a conflict that
results by both sides changing the same region in a very similar way to
get simplified substancially by reducing the common lines. However, when
one side removed a group of lines (perhaps a function was moved to some
other file) while the other side modified it, the default "merge" style
does not give any clue as to why the hunk is left conflicting. You would
need the original to understand what is going on.
The recommended use would be not to set merge.conflictstyle variable so
that you would usually use the default "merge" style conflict, and when
the result in a path in a particular merge is too hard to understand, use
"git checkout --conflict=diff3 $path" to check it out with the original to
review what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it possible to avoid passing the labels of branches as
arguments to merge_recursive(), merge_trees() and
merge_recursive_generic().
It also takes care of subtree merge, output buffering, verbosity, and
rename limits - these were global variables till now in
merge-recursive.c.
A new function, named init_merge_options(), is introduced as well, it
clears the struct merge_info, then initializes with default values,
finally updates the default values based on the config and environment
variables.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches git-checkout to recreate a merge out of unmerged
index entries while resolving conflicts.
With this patch, checking out an unmerged path from the index
now have the following possibilities:
* Without any option, an attempt to checkout an unmerged path
will atomically fail (i.e. no other cleanly-merged paths are
checked out either);
* With "-f", other cleanly-merged paths are checked out, and
unmerged paths are ignored;
* With "--ours" or "--theirs, the contents from the specified
stage is checked out;
* With "-m" (we should add "--merge" as synonym), the 3-way merge
is recreated from the staged object names and checked out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets you to check out 'our' (or 'their') version of an
unmerged path out of the index while resolving conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier we made "git checkout $pathspec" to atomically refuse
the operation of $pathspec matched any path with unmerged
stages. This patch allows:
$ git checkout -f a b c
to ignore, instead of error out on, such unmerged paths. The
fix to prevent checkout of an unmerged path from random stages
is still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a conflicted merge when you have unmerged stages for a
path F in the index, if you said:
$ git checkout F
we rewrote F as many times as we have stages for it, and the
last one (typically "theirs") was left in the work tree, without
resolving the conflict.
This fixes it by noticing that a specified pathspec pattern
matches an unmerged path, and by erroring out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code handles additionally "refs/remotes/<something>/name",
"remotes/<something>/name", and "refs/<namespace>/name".
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
What does the user most likely want with this command?
$ git checkout --track origin/next
Exactly. A branch called 'next', that tracks origin's branch 'next'.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The patch is twofold: it moves the option consistency checks just under
the parse_options call so that it doesn't get in the way of the tree
reference vs. pathspecs desambiguation.
The other part rewrites the way to understand arguments so that when
git-checkout fails it does with an understandable message. Compared to the
previous behavior we now have:
- a better error message when doing:
git checkout <blob reference> --
now complains about the reference not pointing to a tree, instead of
things like:
error: pathspec <blob reference> did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
- a better error message when doing:
git checkout <path> --
It now complains about <path> not being a reference instead of the
completely obscure:
error: pathspec '--' did not match any file(s) known to git.
- an error when -- wasn't used, and the first argument is ambiguous
(i.e. can be interpreted as both ref and as path).
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-checkout: fix command line parsing.
|
|
This fixes an issue when you use:
$ git checkout -- <path1> [<paths>...]
and that <path1> can also be understood as a reference. git-checkout
mistakenly understands this as the same as:
$ git checkout <path1> -- [<paths>...]
because parse-options was eating the '--' and the argument parser thought
he was parsing:
$ git checkout <path1> [<paths>...]
Where there indeed is an ambiguity
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a pointer parameter to read_tree_recursive(), which is passed to the
callback function. This allows callers of read_tree_recursive() to
share data with the callback without resorting to global variables. All
current callers pass NULL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People seem to like "Your branch is ahead by N commit" report made by
"git checkout", but the interface into the statistics function was a bit
clunky. This splits the function into three parts:
* The core "commit counting" function that takes "struct branch" and
returns number of commits to show if we are ahead, behind or forked;
* Convenience "stat formating" function that takes "struct branch" and
formats the report into a given strbuf, using the above function;
* "checkout" specific function that takes "branch_info" (type that is
internal to checkout implementation), calls the above function and
print the formatted result.
in the hope that the former two can be more easily reusable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When unpack_trees() returned an error while switching branches, we used to
stop right there, exiting without writing the index out or switching HEAD.
This is Ok when unpack_trees() returned an error because it detected
untracked files or locally modified paths that could be overwritten by
branch switching, because that error return is done before we start to
modify the work tree. But it is undesirable if unpack_trees() already
started to update the work tree and a failure is returned because some but
not all paths are updated in the work tree, perhaps because a directory
that some files need to go in was read-only by mistake, or a file that
will be overwritten by branch switching had a mandatory lock on it and we
failed to unlink it.
This changes the behaviour upon such an error to complete the branch
switching; the files updated in the work tree will hopefully be much more
consistent with the index and HEAD derived from the switched-to branch.
We still issue error messages, and exit the command with non-zero status,
so scripted callers need to notice it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Keith Cascio
Junio C Hamano
Thomas Rast
Stephan Beyer
Clemens Buchacher
Matt McCutchen
Alexandre Julliard
Brandon Casey
Dmitry Potapov
Shawn O. Pearce
Jonas Fonseca
Daniel Barkalow
Jeff King
Miklos Vajna
Alex Riesen
Johannes Schindelin
Pierre Habouzit
René Scharfe