| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git bundle create" left an invalid, partially written bundle if
an error occured during creation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This eliminates all use of byte-at-a-time reading of data in this
function: as Junio noted, a bundle file is seekable so we can
reset the file position to the first part of the pack-file using lseek
after reading the header.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-bundle create on cygwin was nearly unusable due to 1 character
at a time (unbuffered) reading from an exec'ed process. Fix by using
fdopen to get a buffered stream.
Results for "time git bundle create test.bdl v1.0.3..v1.5.2" are:
before this patch:
cygwin linux
real 1m38.828s 0m3.578s
user 0m12.122s 0m2.896s
sys 1m28.215s 0m0.692s
after this patch:
real 0m3.688s 0m2.835s
user 0m3.075s 0m2.731s
sys 0m1.075s 0m0.149s
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark Levedahl <mlevedahl@gmail.com> writes:
> Junio C Hamano wrote:
>> While "git bundle" was a useful way to sneakernet incremental
>> changes, we did not allow:
>>
> Thanks - I've been thinking for months I could fix this bug, never
> figured it out and didn't want to nag Dscho one more time. I confirm
> that this allows creation of bundles with arbitrary refs, not just
> those under refs/heads. Yahoo!
Actually, there is another bug nearby.
If you do:
git bundle create v2.6-20-v2.6.22.bndl v2.6.20..v2.6.22
the bundle records that it requires v2.6.20^0 commit (correct)
and gives you tag v2.6.22 (incorrect); the bug is that the
object it lists in fact is the commit v2.6.22^0, not the tag.
This is because the revision range operation .. is always about
set of commits, but the code near where my patch touches does
not validate that the sha1 value obtained from dwim_ref()
against the commit object name e->item->sha1 before placing the
head information in the commit.
The attached patch attempts to fix this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make every builtin-*.c file #include "builtin.h".
Also takes care of some declaration/definition mismatches.
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that the run_command family supports all of the redirection
modes needed by builtin-bundle, we can use those functions rather
than the underlying POSIX primitives. This should help to make the
bundle command slightly more portable to other systems, like Windows.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A use case for git-bundle expected to be quite common is this:
$ git bundle create daily.bundle --since=10.days.ago --all
The expected outcome is _not_ to error out if only a couple of the
refs were not changed during the last 10 days.
This patch complains loudly about refs which are skipped due to the
pack not containing the corresponding objects, but dies only if
no objects would be in the pack _at all_.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Not only does it prevent accidentally losing older bundles, but it
also fixes a subtle bug: when writing into an existing bundle,
git-pack-objects would not truncate the bundle. Therefore,
fetching from the bundle would trigger an error in unpack-objects:
"fatal: pack has junk at the end".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The earlier patch tried to be nice by just warning, but it seems
more likely that the user wants to adjust the parameters.
Also, it prevents a bundle containing _all_ revisions in the case
when the user only gave one ref, but also rev-list options which
excluded the ref.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The patch to make the packs in a bundle thin forgot the receiving side.
D'oh.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Thin packs are way smaller, but they rely on the receiving end to have the
base objects. However, Git's pack protocol also uses thin packs by
default. So make the packs contained in bundles thin, since bundles are
just another transport.
The patch looks a bit bigger than intended, mainly because --thin
_implies_ that pack-objects should run its own rev-list. Therefore, this
patch removes all the stuff we used to roll rev-list ourselves.
This commit also changes behaviour slightly: since we now know early
enough if a specified ref is _not_ contained in the pack, we can avoid
putting that ref into the pack. So, we don't die() here, but warn()
instead, and skip that ref.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When saying something like "--since=1.day.ago" or "--max-count=5",
git-bundle finds the boundary commits which are recorded as
prerequisites. However, it failed to tell pack-objects _not_ to
pack the objects which are in these.
Fix that. And add a test for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If read_header() fails, it returns <0, not 0. Further, an open(/dev/null)
was not checked for errors.
Also, this adds two tests to make sure that the bundle file looks
correct, by checking if it has the header has the expected form, and that
the pack contains the right amount of objects.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
verify_bundle() returned with an error early only when all
prerequisite commits were missing. It should error out much
earlier when some are missing.
When the rev-list is limited in ways other than revision range
(e.g. --max-count or --max-age), create_bundle() listed all
positive refs given from the command line as if they are
available, but resulting pack may not have some of them. Add a
logic to make sure all of them are included, and error out
otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The handcrafted built-in rev-list lookalike forgot to mark the trees
and blobs contained in the boundary commits uninteresting, resulting
in unnecessary objects in the pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As suggested by Mark Levedahl.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
We can use the revision walker easily for checking if the
prerequisites are met, instead of fork()ing off a rev-list,
which would list only the first unmet prerequisite.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch fixes issues mentioned by Junio, Nico and Simon:
- I forgot to convert the usage string when removing the "--" from
the subcommands,
- a style fix in the bundle_header,
- use xread() instead of read(),
- use write_or_die() instead of write(),
- make the bundle header extensible,
- fail if the whitespace after a sha1 of a reference is missing,
- close() the fds passed to a subprocess,
- in verify_bundle(), do not use "rev-list --stdin", but rather
pass the revs directly (avoiding a fork()),
- fix a corrupted comment in show_object(), and
- fix the size check in index_pack.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Mark Levedahl
Peter Hagervall
Johan Herland
Theodore Ts'o
Shawn O. Pearce
Johannes Schindelin
Junio C Hamano