| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Small correction in reading of commit headers
Documentation: fix typo in git-remote.txt
Add test for blame corner cases.
blame: -C -C -C
blame: Notice a wholesale incorporation of an existing file.
Fix --boundary output
diff format documentation: describe raw combined diff format
Mention version 1.5.1 in tutorial and user-manual
Add --no-rebase option to git-svn dcommit
Fix markup in git-svn man page
|
|
When you do this, existing "blame -C -C" would not find that the
latter half of the file2 came from the existing file1:
... both file1 and file2 are tracked ...
$ cat file1 >>file2
$ git add file1 file2
$ git commit
This is because we avoid the expensive find-copies-harder code
that makes unchanged file (in this case, file1) as a candidate
for copy & paste source when annotating an existing file
(file2). The third -C now allows it. However, this obviously
makes the process very expensive. We've actually seen this
patch before, but I dismissed it because it covers such a narrow
(and arguably stupid) corner case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The -C option to blame tries to find a section of a preimage
file by running diff against the lines whose origin is still
unknown, and excluding the different parts. The code however
did not cover the case where the tail part of the section
matched, which we handle for the normal non-move/copy codepath.
This breakage was most visible when preimage file matches in its
entirety and failed to pass blame in such a case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There really isn't any point in turning off .mailmap. The
number of mailmap lookups are bounded by number of lines in the
target file, and the real blame processing is much more
expensive. If it turns out to be too costly, we should optimize
the mailmap lookup itself, instead of avoiding the call.
If the author information of commits of the project are
relatively clean, .mailmap would have only small number of
entries, and the overhead of looking it up will not be high. On
the other hand, if the author information is really screwed up
that a good .mailmap needs to be maintained to run shortlog,
giving uncleaned names in blame output is not helpful at all
either.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
read_mailmap already returns not 0 in case of error, and nothing
seem to be interested in it. It also is silent about the fact
(read_mailmap being to chatty would justify the call to access,
but there is no point for it to be and it isn't).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes git-blame to use the same mailmap used by
git-shortlog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With this "git blame -b -s HEAD~n..HEAD" becomes a nicer way to
review the result of recent changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-blame would overflow commit->buffer when annotating files with long paths.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The earlier round makes the function return "is it different"
and it does not return a value suitable for sorting anymore. Reverse
the logic to return "are they the same suspect" instead, and rename
it to "same_suspect()".
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The commit structures are guaranteed their uniqueness by the object
layer, so we can check their address and see if they are the same
without going down to the object sha1 level.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Update draft release notes for 1.5.0.1
Convert update-index references in docs to add.
Attempt to improve git-rebase lead-in description.
Do not take mode bits from index after type change.
git-blame: prevent argument parsing segfault
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
|
|
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-cvsserver does not want the boundary commits shown any differently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-merge-recursive wants an null tree as the fake merge base
while producing the merge result tree. The null tree does not
have to be written out in the object store as it won't be part
of the result, and it is a prime example for using the new
pretend_sha1_file() function.
git-blame needs to register an arbitrary data to in-core index
while annotating a working tree file (or standard input), but
git-blame is a read-only application and the user of it could
even lack the privilege to write into the object store; it is
another good example for pretend_sha1_file().
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Warning: this changes the semantics.
This makes "git blame" without any positive rev to start digging
from the working tree copy, which is made into a fake commit
whose sole parent is the HEAD.
It also adds --contents <file> option to pretend as if the
working tree copy has the contents of the named file. You can
use '-' to make the command read from the standard input.
If you want the command to start annotating from the HEAD
commit, you need to explicitly give HEAD parameter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Starting a pager defeats the purpose of the incremental output
mode. This changes git-blame to only paginate if --incremental
was not given.
git -p blame --incremental still starts the pager, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Otherwise a pathname that has funny characters such as LF would
screw up the parsing programs of the output.
Strictly speaking, this is not backward compatible, but the
current output for pathnames that have embedded LF and such
cannot be sanely parsed anyway, and pathnames that only use
characters from the portable pathname character set won't be
affected.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds --incremental option to help GUI porcelains to show
the result from git-blame incrementally. The output gives the
origin information in the same format as the porcelain format.
The first line has commit object name, the line number of the
first line in the group in the original file, the line number of
that file in the final image, and number of lines in the group.
Then subsequent lines show the metainformation for the commit
when the commit is shown for the first time, except the filename
information is always shown (we cannot even make it conditional
to -C option as blame always follows the renaming of the file
wholesale).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/blame:
blame: -b (blame.blankboundary) and --root (blame.showroot)
|
|
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When blame.blankboundary is set (or -b option is given), commit
object names are blanked out in the "human readable" output
format for boundary commits.
When blame.showroot is not set (or --root is not given), the
root commits are treated as boundary commits. The code still
attributes the lines to them, but with -b their object names are
not shown.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When blaming with revision ranges, often many lines are attributed
to different commits at the boundary, but they are not interesting
for the purpose of finding project history during that revision range.
This outputs the lines blamed on boundary commits differently. When
showing "human format" output, their SHA-1 are shown with '^' prefixed.
In "porcelain format", the commit will be shown with an extra attribute
line "boundary".
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We lacked "--" termination in the underlying init_revisions() call
which made it impossible to specify a revision that happens to
have the same name as an existing file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to get the case that more than two paths came from the
same commit wrong when computing the output width and deciding
to turn on --show-name option automatically. When we find that
lines that came from a path that is different from what we
started digging from, we should always turn --show-name on, and
we should count the name length for all files involved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The graft file can contain comment lines and read_graft_line can
return NULL for such an input, which should be skipped by the
reader.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Junio C Hamano
Alex Riesen
Andrew Ruder
Michael Spang
Shawn O. Pearce
Nicolas Pitre
Tommi Kyntola
Pavel Roskin
Ren,Ai(B Scharfe
Linus Torvalds