| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace the hand-rolled parsers that find and remove --remote and --exec
by a parseopt parser that also handles --output.
All three options only have a meaning if no remote server is used or on
the local side. They must be rejected by upload-archive and should not
be sent to the server by archive.
We can't use a single parser for both remote and local side because the
remote end possibly understands a different set of options than the
local side. A local parser would then wrongly accuse options valid on
the other side as being incorrect.
This patch implements a very forgiving parser that understands only the
three options mentioned above. All others are passed to the normal,
complete parser in archive.c (running either locally in archive, or
remotely in upload-archive). This normal parser definition contains
dummy entries for the three options, in order for them to appear in the
help screen.
The parseopt parser allows multiple occurrences of --remote and --exec
unlike the previous one; the one specified last wins. This looseness
is acceptable, I think.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves the call to git_config to a place where it doesn't break the
logic for using git archive in a bare repository but retains the fix to
make git archive respect core.autocrlf.
Tests are by René Scharfe.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Tested-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is currently no call to git_config at the start of cmd_archive.
When creating tar archives the core config is read as a side-effect of
reading the tar specific config, but this doesn't happen for zip
archives.
The consequence is that in a configuration with core.autocrlf set,
although files in a tar archive are created with crlf line endings,
files in a zip archive retain unix line endings.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Acked-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "--remote repo" and "--exec cmd" in addition to "--remote=repo" and
"--exec=cmd" to make their usage consistent with parameters handled by
parse_options().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
write_archive() in archive.c is the only callsite for the command line
parsing functions located in builtin-archive.c. Move them to the place
where they are used, un-export them and make them static, as hinted at
by Stephan.
Cc: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both archive and upload-archive have to parse command line arguments and
then call the archiver specific write function. Move the duplicate code
to a new function, write_archive().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove obsolete #includes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
zlib_compression_level is the compression level used for git's object store.
It's 1 by default, which is the fastest setting. This variable is also used
as the default compression level for ZIP archives created by git archive.
For archives, however, zlib's own default of 6 is more appropriate, as it's
favouring small size over speed -- archive creation is not that performance
critical most of the time.
This patch makes git archive independent from git's internal compression
level setting. It affects invocations of git archive without explicitly
specified compression level option, only.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/dashless:
Make usage strings dash-less
t/: Use "test_must_fail git" instead of "! git"
t/test-lib.sh: exit with small negagive int is ok with test_must_fail
Conflicts:
builtin-blame.c
builtin-mailinfo.c
builtin-mailsplit.c
builtin-shortlog.c
git-am.sh
t/t4150-am.sh
t/t4200-rerere.sh
|
|
Replace the code that calls backend specific argument parsers by a
simple flag mechanism. This reduces code size and complexity.
We can add back such a mechanism (based on incremental parse_opt(),
perhaps) when we need it. The compression level parameter, though,
is going to be shared by future compressing backends like tgz.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Calculate the length of base and save it in a new member of struct
archiver_args. This way we don't have to compute it in each of the
format backends.
Note: parse_archive_args() guarantees that ->base won't ever be NULL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass struct archiver and struct archiver_args explicitly to parse_archive_args
and remove the latter from the former. This allows us to get rid of struct
archiver_desc and simplifies the code a bit.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the specfile (export-subst) attribute was introduced, it added a
dependency from archive-{tar|zip}.c to builtin-archive.c. This broke the
support for archive-operations in libgit.a since builtin-archive.o doesn't
belong in libgit.a.
This patch moves the functions required by libgit.a from builtin-archive.c
to the new file archive.c (which becomes part of libgit.a).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/forkexec:
Use the asyncronous function infrastructure to run the content filter.
Avoid a dup2(2) in apply_filter() - start_command() can do it for us.
t0021-conversion.sh: Test that the clean filter really cleans content.
upload-pack: Run rev-list in an asynchronous function.
upload-pack: Move the revision walker into a separate function.
Use the asyncronous function infrastructure in builtin-fetch-pack.c.
Add infrastructure to run a function asynchronously.
upload-pack: Use start_command() to run pack-objects in create_pack_file().
Have start_command() create a pipe to read the stderr of the child.
Use start_comand() in builtin-fetch-pack.c instead of explicit fork/exec.
Use run_command() to spawn external diff programs instead of fork/exec.
Use start_command() to run content filters instead of explicit fork/exec.
Use start_command() in git_connect() instead of explicit fork/exec.
Change git_connect() to return a struct child_process instead of a pid_t.
Conflicts:
builtin-fetch-pack.c
|
|
Fix size_t vs. unsigned long pointer mismatch warnings introduced
with the addition of strbuf_detach().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
For that purpose, the ->buf is always initialized with a char * buf living
in the strbuf module. It is made a char * so that we can sloppily accept
things that perform: sb->buf[0] = '\0', and because you can't pass "" as an
initializer for ->buf without making gcc unhappy for very good reasons.
strbuf_init/_detach/_grow have been fixed to trust ->alloc and not ->buf
anymore.
as a consequence strbuf_detach is _mandatory_ to detach a buffer, copying
->buf isn't an option anymore, if ->buf is going to escape from the scope,
and eventually be free'd.
API changes:
* strbuf_setlen now always works, so just make strbuf_reset a convenience
macro.
* strbuf_detatch takes a size_t* optional argument (meaning it can be
NULL) to copy the buffer's len, as it was needed for this refactor to
make the code more readable, and working like the callers.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* Now, those functions take an "out" strbuf argument, where they store their
result if any. In that case, it also returns 1, else it returns 0.
* those functions support "in place" editing, in the sense that it's OK to
call them this way:
convert_to_git(path, sb->buf, sb->len, sb);
When doable, conversions are done in place for real, else the strbuf
content is just replaced with the new one, transparentely for the caller.
If you want to create a new filter working this way, being the accumulation
of filter1, filter2, ... filtern, then your meta_filter would be:
int meta_filter(..., const char *src, size_t len, struct strbuf *sb)
{
int ret = 0;
ret |= filter1(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
ret |= filter2(...., src, len, sb);
if (ret) {
src = sb->buf;
len = sb->len;
}
....
return ret | filtern(..., src, len, sb);
}
That's why subfilters the convert_to_* functions called were also rewritten
to work this way.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the strbuf conversion, result was a char pointer. The if
statement checked for it being not NULL, which meant that no
"$Format:...$" string had been found and no replacement had to be
made. format_subst() returned NULL in that case -- the caller
then simply kept the original file content, as it was unaffected
by the expansion.
The length of the string being 0 is not the same as the string
being NULL (expansion to an empty string vs. no expansion at all),
so checking result.len != 0 is not a full replacement for the old
NULL check.
However, I doubt the subtle optimization explained above resulted
in a notable speed-up anyway. Simplify the code and add the tail
of the file to the expanded string unconditionally.
[jc: added a test to expose the breakage this fixes]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also remove the "len" parameter, as:
(1) it was used as a max boundary, and every caller used ~0u
(2) we check for final NUL no matter what, so it doesn't help for speed.
As a result most of the pp_* function takes 3 arguments less, and we need
a lot less local variables, this makes the code way more readable, and
easier to extend if needed.
This patch also fixes some spacing and cosmetic issues.
This patch also fixes (as a side effect) a memory leak intoruced in
builtin-archive.c at commit df4a394f (fmt was xmalloc'ed and not free'd)
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"%PLCHLDR" (take 2)
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
|
|
It used to roll its own setup.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:
if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))
This step manually cleans them up to read:
if (!prefixcmp(arg, "foo"))
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier, git_connect() returned the same fd twice or two
separate fds, depending on the way the connection was made (when
we are talking to the other end over a single socket, we used
the same fd twice, and when our end is connected to a pipepair
we used two).
This forced callers who do close() and dup() to really care
which was which, and most of the existing callers got this
wrong, although without much visible ill effect. Many were
closing the same fd twice when we are talking over a single
socket, and one was leaking a fd.
This fixes it to uniformly use two separate fds, so if somebody
wants to close only reader side can just do close() on it
without worrying about it accidentally also closing the writer
side or vice versa.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Found by running "git archive --format=tar HEAD" in Documentation/
directory.
It's surprising that nobody has noticed this from the beginning...
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This tiny patch makes GIT compile again on HP-UX 11i.
[jc: The setlinebuf() is described as unportable to BSD before
4.2; it's not even in POSIX, while setvbuf() is in ISO C.]
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
At least one older version of the Solaris C compiler doesn't support
the newer C99 style struct initializers. To allow Git to compile
on those systems use an archive description struct which is easier
to initialize without the C99 struct initializer syntax.
Also since the archives array is not used by anyone other than
archive.c we can make it static.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It has been a few times that I ended up with such a confusing display:
|remote: Generating pack...
|remote: Done counting 17 objects.
|remote: Result has 9 objects.
|remote: Deltifying 9 objects.
|remote: 100% (9/9) done
|remote: Unpacking 9 objects
|Total 9, written 9 (delta 8), reused 0 (delta 0)
| 100% (9/9) done
The confusion can be avoided in most cases by writing the remote message
in one go to prevent interleacing with local messages. The buffer
declaration has been moved inside recv_sideband() to avoid extra string
copies.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Suggested by Franck, and I think it makes sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using the refactored sideband code from existing upload-pack protocol,
this lets the error condition and status output sent from the remote
process to be shown locally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some people needed --exec to specify the location of the upload-pack
executable, because their default SSH log-in does not include the
directory they have their own private copy of git on the $PATH.
These people need to be able to say --exec to git-archive --remote
for the same reason.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
And teach backends about it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 9e2c44a2893ae90944a0b7c9f40a9d22b759b5c0 commit)
|
|
Otherwise the remote notification that comes with -v option can get
clumped together.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from a675cda60ead41f439b04bc69e0f19ace04e59d3 commit)
|
|
This fixes git-archive --remote not to parse archiver arguments;
otherwise if the remote end implements formats other than the
one known locally we will not be able to access that format.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Again, this is based on Rene Scharfe's earlier patch, but uses
the archiver support introduced by the previous patch.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is based on Rene Scharfe's earlier patch, but uses the
archiver support introduced by the previous patch.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
René Scharfe
Charles Bailey
Heikki Orsila
Junio C Hamano
Stephan Beyer
Lars Hjemli
Johannes Sixt
Pierre Habouzit
Michael S. Tsirkin
Junio C Hamano
Johannes Schindelin
Michal Rokos
Shawn O. Pearce
Nicolas Pitre
Franck Bui-Huu