| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are a few remaining ones, but this fixes the trivial ones. It boils
down to two main issues that sparse complains about:
- warning: Using plain integer as NULL pointer
Sparse doesn't like you using '0' instead of 'NULL'. For various good
reasons, not the least of which is just the visual confusion. A NULL
pointer is not an integer, and that whole "0 works as NULL" is a
historical accident and not very pretty.
A few of these remain: zlib is a total mess, and Z_NULL is just a 0.
I didn't touch those.
- warning: symbol 'xyz' was not declared. Should it be static?
Sparse wants to see declarations for any functions you export. A lack
of a declaration tends to mean that you should either add one, or you
should mark the function 'static' to show that it's in file scope.
A few of these remain: I only did the ones that should obviously just
be made static.
That 'wt_status_submodule_summary' one is debatable. It has a few related
flags (like 'wt_status_use_color') which _are_ declared, and are used by
builtin-commit.c. So maybe we'd like to export it at some point, but it's
not declared now, and not used outside of that file, so 'static' it is in
this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/maint-1.6.0-add-config-fix:
add: allow configurations to be overriden by command line
use xstrdup, not strdup in ll-merge.c
Conflicts:
builtin-add.c
|
|
Don't call git_config after parsing the command line options, otherwise
the config settings will override any settings made by the command line.
This can be seen by setting add.ignore_errors and then specifying
--no-ignore-errors when using git-add.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-add-empty:
add: don't complain when adding empty project root
|
|
We try to warn the user if one of their pathspecs caused no
matches, as it may have been a typo. However, we disable the
warning if the pathspec points to an existing file, since
that means it is not a typo but simply an empty directory.
Unfortunately, the file_exists() test was broken for one
special case: the pathspec of the project root is just "".
This patch detects this special case and acts as if the file
exists (which it must, since it is the project root).
The user-visible effect is that this:
$ mkdir repo && cd repo && git init && git add .
used to complain like:
fatal: pathspec '' did not match any files
but now is a silent no-op.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With "git add -e [<files>]", Git will fire up an editor with the current
diff relative to the index (i.e. what you would get with "git diff
[<files>]").
Now you can edit the patch as much as you like, including adding/removing
lines, editing the text, whatever. Make sure, though, that the first
character of the hunk lines is still a space, a plus or a minus.
After you closed the editor, Git will adjust the line counts of the hunks
if necessary, thanks to the --recount option of apply, and commit the
patch. Except if you deleted everything, in which case nothing happens
(for obvious reasons).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mv/parseopt-ls-files:
ls-files: fix broken --no-empty-directory
t3000: use test_cmp instead of diff
parse-opt: migrate builtin-ls-files.
Turn the flags in struct dir_struct into a single variable
Conflicts:
builtin-ls-files.c
t/t3000-ls-files-others.sh
|
|
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
|
|
Global static variables don't need to be initialized to 0/NULL.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By having flags represented as bits in the new member variable 'flags',
it will be easier to use parse_options when dir_struct is involved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It comes quite as a surprise to an unsuspecting Git user that calling
"git add submodule/file" (which is a mistake, alright) _removes_
the submodule in the index, and adds the file. Instead, complain loudly.
While at it, be nice when the user said "git add submodule/" which is
most likely the consequence of tab-completion, and stage the submodule,
instead of trying to add the contents of that directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Tim Daly <daly@axiom-developer.org>
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds "--intent-to-add" option to "git add". This is to let the
system know that you will tell it the final contents to be staged later,
iow, just be aware of the presense of the path with the type of the blob
for now. It is implemented by staging an empty blob as the content.
With this sequence:
$ git reset --hard
$ edit newfile
$ git add -N newfile
$ edit newfile oldfile
$ git diff
the diff will show all changes relative to the current commit. Then you
can do:
$ git commit -a ;# commit everything
or
$ git commit oldfile ;# only oldfile, newfile not yet added
to pretend you are working with an index-free system like CVS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/add-addremove:
builtin-add.c: optimize -A option and "git add ."
builtin-add.c: restructure the code for maintainability
|
|
This is the same fix for the issue of adding "sym/path" when "sym" is a
symblic link that points at a directory "dir" with "path" in it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier "git add -A" change was done in a quite inefficient
way (i.e. it is as unefficient as "git add -u && git add ." modulo
one fork/exec and read/write index).
When the user asks "git add .", we do not have to examine all paths
we encounter and perform the excluded() and dir_add_name()
processing, both of which are slower code and use slower data structure
by git standards, especially when the index is already populated.
Instead, we implement "git add $pathspec..." as:
- read the index;
- read_directory() to process untracked, unignored files the current
way, that is, recursively doing readdir(), filtering them by pathspec
and excluded(), queueing them via dir_add_name() and finally do
add_files(); and
- iterate over the index, filtering them by pathspec, and update only
the modified/type changed paths but not deleted ones.
And "git add -A" becomes exactly the same as above, modulo:
- missing $pathspec means "." instead of being an error; and
- "iterate over the index" part handles deleted ones as well,
i.e. exactly what the current update_callback() in builtin-add.c does.
In either case, because fill_directory() does not use read_directory() to
read everything in, we need to add an extra logic to iterate over the
index to catch mistyped pathspec.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A private function add_files_to_cache() in builtin-add.c was borrowed by
checkout and commit re-implementors without getting properly refactored to
more library-ish place. This does the refactoring.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/add-addremove:
git-add --all: documentation
git-add --all: tests
git-add --all: add all files
builtin-add.c: restructure the code for maintainability
Conflicts:
builtin-add.c
|
|
"git update-index --refresh", "git reset" and "git add --refresh" have
reported paths that have local modifications as "needs update" since the
beginning of git.
Although this is logically correct in that you need to update the index at
that path before you can commit that change, it is now becoming more and
more clear, especially with the continuous push for user friendliness
since 1.5.0 series, that the message is suboptimal. After all, the change
may be something the user might want to get rid of, and "updating" would
be absolutely a wrong thing to do if that is the case.
I prepared two alternatives to solve this. Both aim to reword the message
to more neutral "locally modified".
This patch is a more intrusive variant that changes the message for only
Porcelain commands ("add" and "reset") while keeping the plumbing
"update-index" intact.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
People sometimes find that "git add -u && git add ." are 13 keystrokes too
many. This reduces it by nine.
The support of this has been very low priority for me personally, because
I almost never do "git add ." in a directory with already tracked files,
and in a new directory, there is no point saying "git add -u".
However, for two types of people (that are very different from me), this
mode of operation may make sense and there is no reason to leave it
unsupported. That is:
(1) If you are extremely well disciplined and keep perfect .gitignore, it
always is safe to say "git add ."; or
(2) If you are extremely undisciplined and do not even know what files
you created, and you do not very much care what goes in your history,
it does not matter if "git add ." included everything.
So there it is, although I suspect I will not use it myself, ever.
It will be too much of a change that is against the expectation of the
existing users to allow "git commit -a" to include untracked files, and
it would be inconsistent if we named this new option "-a", so the short
option is "-A". We _might_ want to later add "git commit -A" but that is
a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The implementation of "git add" has four major codepaths that are mutually
exclusive:
- if "--interactive" or "--patch" is given, spawn "git add--interactive"
and exit without doing anything else. Otherwise things are handled
internally in this C code;
- if "--update" is given, update the modified files and exit without
doing anything else;
- if "--refresh" is given, do refresh and exit without doing anything
else;
- otherwise, find the paths that match pathspecs and stage their
contents.
It led to an unholy mess in the code structure; each of the latter three
codepaths has a separate call to read_cache(), even though they are all
about "read the current index, update it and write it back", and logically
they should read the index once _anyway_.
This cleans up the latter three cases by introducing a pair of helper
variables:
- "add_new_files" is set if we need to scan the working tree for paths
that match the pathspec. This variable is false for "--update" and
"--refresh", because they only work on already tracked files.
- "require_pathspec" is set if the user must give at least one pathspec.
"--update" does not need it but all the other cases do.
This is in preparation for introducing a new option "--all", that does the
equivalent of "git add -u && git add ." (aka "addremove").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/config-cb:
Provide git_config with a callback-data parameter
Conflicts:
builtin-add.c
builtin-cat-file.c
|
|
* jc/add-n-u:
Make git add -n and git -u -n output consistent
"git-add -n -u" should not add but just report
Conflicts:
builtin-add.c
builtin-mv.c
cache.h
read-cache.c
|
|
Output format from "git add -n $path" lists path to blobs that are going
to be added on a single line, separated with SP. On the other hand, the
suggested "git add -u -n" shows one path per line, like "add '<file>'\n".
Of course, these two are inconsistent.
Plain "git add -n" can afford to only say names of paths, as all it does
is to add (update). However, "git add -u" needs to be able to express
"remove" somehow. So if we need to have them formatted the same way, we
need to unify with the "git add -n -u" format. Incidentally, this is
consistent with how 'update-index' says it.
This changes the output from "git add -n $paths" but as a general
principle, output from Porcelain commands is a fair game for improvements
and not for script consumption.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the programs which used the function (as add_file_to_cache).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get_pathspec() was originally made absolute-path capable,
we botched the interface to it, without dying inside the function
when given a path that is outside the work tree, and made it the
responsibility of callers to check the condition in a roundabout
way. This is made unnecessary with the previous patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We would need to notice and fail if command line had a nonsense pathspec.
Earlier get_pathspec() returned all the inputs including bad ones, but
the new one issues warnings and removes offending ones from its return
value, so the callers need to be adjusted to notice it.
Additional test scripts were initially from Robin Rosenberg, further fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove remaining double close(2)'s. i.e. close() before
commit_locked_index() or commit_lock_file().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "--patch" option is supplied, the patch_update_cmd() function is
called bypassing the main_loop() and exits.
Seeing as builtin-add is the only caller of git-add--interactive we can
impose a strict requirement on the format of the arguments to avoid
possible ambiguity: an "--" argument must be used whenever any pathspecs
are passed, both with the "--patch" option and without it.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
|
|
This fixes the pathspec interactive_add() passes to the underlying
git-add--interactive helper. When the command was run from a
subdirectory, cmd_add() already has gone up to the toplevel of the work
tree, and the helper will be spawned from there. The pathspec given on
the command line from the user needs to be adjusted for this.
This adds "validate_pathspec()" function in the callchain, but it does
not validate yet. The function can be changed to barf if there are
unmatching pathspec given by the user, but that is not strictly
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier 7c0ab4458994aa895855abc4a504cf693ecc0cf1 (Teach builtin-add
to pass multiple paths to git-add--interactive) did not allocate enough,
and had unneeded (void*) pointer arithmetic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is to use a few functions refactored to use in the built-in
commit series.
* kh/commit: (28 commits)
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
builtin-commit: Clean up an unused variable and a debug fprintf().
Call refresh_cache() when updating the user index for --only commits.
builtin-commit: Add newline when showing which commit was created
builtin-commit: resurrect behavior for multiple -m options
builtin-commit --s: add a newline if the last line was not a S-o-b
builtin-commit: fix --signoff
git status: show relative paths when run in a subdirectory
builtin-commit: Refresh cache after adding files.
builtin-commit: fix reflog message generation
launch_editor(): read the file, even when EDITOR=:
...
|
|
This separates the logic to limit the extent of change to the
index by where you are (controlled by "prefix") and what you
specify from the command line (controlled by "pathspec").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of just accepting a single file parameter, git-add now accepts
any number of path parameters, fowarding them to git-add--interactive.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Conflicts:
builtin-add.c
|
|
Earlier in commit 0781b8a9b2fe760fc4ed519a3a26e4b9bd6ccffe
(add_file_to_index: skip rehashing if the cached stat already
matches), add_file_to_index() were taught not to re-add the path
if it already matches the index.
The change meant well, but was not executed quite right. It
used ie_modified() to see if the file on the work tree is really
different from the index, and skipped adding the contents if the
function says "not modified".
This was wrong. There are three possible comparison results
between the index and the file in the work tree:
- with lstat(2) we _know_ they are different. E.g. if the
length or the owner in the cached stat information is
different from the length we just obtained from lstat(2), we
can tell the file is modified without looking at the actual
contents.
- with lstat(2) we _know_ they are the same. The same length,
the same owner, the same everything (but this has a twist, as
described below).
- we cannot tell from lstat(2) information alone and need to go
to the filesystem to actually compare.
The last case arises from what we call 'racy git' situation,
that can be caused with this sequence:
$ echo hello >file
$ git add file
$ echo aeiou >file ;# the same length
If the second "echo" is done within the same filesystem
timestamp granularity as the first "echo", then the timestamp
recorded by "git add" and the timestamp we get from lstat(2)
will be the same, and we can mistakenly say the file is not
modified. The path is called 'racily clean'. We need to
reliably detect racily clean paths are in fact modified.
To solve this problem, when we write out the index, we mark the
index entry that has the same timestamp as the index file itself
(that is the time from the point of view of the filesystem) to
tell any later code that does the lstat(2) comparison not to
trust the cached stat info, and ie_modified() then actually goes
to the filesystem to compare the contents for such a path.
That's all good, but it should not be used for this "git add"
optimization, as the goal of "git add" is to actually update the
path in the index and make it stat-clean. With the false
optimization, we did _not_ cause any data loss (after all, what
we failed to do was only to update the cached stat information),
but it made the following sequence leave the file stat dirty:
$ echo hello >file
$ git add file
$ echo hello >file ;# the same contents
$ git add file
The solution is not to use ie_modified() which goes to the
filesystem to see if it is really clean, but instead use
ie_match_stat() with "assume racily clean paths are dirty"
option, to force re-adding of such a path.
There was another problem with "git add -u". The codepath
shares the same issue when adding the paths that are found to be
modified, but in addition, it asked "git diff-files" machinery
run_diff_files() function (which is "git diff-files") to list
the paths that are modified. But "git diff-files" machinery
uses the same ie_modified() call so that it does not report
racily clean _and_ actually clean paths as modified, which is
not what we want.
The patch allows the callers of run_diff_files() to pass the
same "assume racily clean paths are dirty" option, and makes
"git-add -u" codepath to use that option, to discover and re-add
racily clean _and_ actually clean paths.
We could further optimize on top of this patch to differentiate
the case where the path really needs re-adding (i.e. the content
of the racily clean entry was indeed different) and the case
where only the cached stat information needs to be refreshed
(i.e. the racily clean entry was actually clean), but I do not
think it is worth it.
This patch applies to maint and all the way up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
|
|
* kh/commit:
Export rerere() and launch_editor().
Introduce entry point add_interactive and add_files_to_cache
Enable wt-status to run against non-standard index file.
Enable wt-status output to a given FILE pointer.
|
|
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
|
Linus Torvalds
Junio C Hamano
Stephen Boyd
Jeff King
Johannes Schindelin
Felipe Contreras
Kjetil Barvik
Alexander Potashev
Stephan Beyer
SZEDER Gábor
Gustaf Hendeby
Alex Riesen
Brandon Casey
Wincent Colaiuta
Kristian Høgsberg