summaryrefslogtreecommitdiff
path: root/attr.c
AgeCommit message (Collapse)AuthorFilesLines
2009-04-17attr: add GIT_ATTR_INDEX "direction"Libravatar Nguyễn Thái Ngọc Duy1-3/+9
This instructs attr mechanism, not to look into working .gitattributes at all. Needed by tools that does not handle working directory, such as "git archive". Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-13Read attributes from the index that is being checked outLibravatar Junio C Hamano1-18/+55
Traditionally we used .gitattributes file from the work tree if exists, and otherwise read from the index as a fallback. When switching to a branch that has an updated .gitattributes file, and entries in it give different attributes to other paths being checked out, we should instead read from the .gitattributes in the index. This breaks a use case of fixing incorrect entries in the .gitattributes in the work tree (without adding it to the index) and checking other paths out, though. $ edit .gitattributes ;# mark foo.dat as binary $ rm foo.dat $ git checkout foo.dat Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-16Fix buffer overflow in prepare_attr_stackLibravatar Dmitry Potapov1-6/+9
If PATH_MAX on your system is smaller than a path stored in the git repo, it may cause the buffer overflow in prepare_attr_stack. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-09Ignore .gitattributes in bare repositoriesLibravatar René Scharfe1-21/+25
Attributes can be specified at three different places: the internal table of default values, the file $GIT_DIR/info/attributes and files named .gitattributes in the work tree. Since bare repositories don't have a work tree, git should ignore any .gitattributes files there. This patch makes git do that, so the only way left for a user to specify attributes in a bare repository is the file info/attributes (in addition to changing the defaults and recompiling). In addition, git-check-attr is now allowed to run without a work tree. Like any user of the code in attr.c, it ignores the .gitattributes files when run in a bare repository. It can still read from info/attributes. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-22gitattributes: Fix subdirectory attributes specified from root directoryLibravatar Matthew Ogilvie1-1/+3
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-07gitattributes: fix relative path matchingLibravatar Junio C Hamano1-3/+3
There was an embarrassing pair of off-by-one miscounting that failed to match path "a/b/c" when "a/.gitattributes" tried to name it with relative path "b/c". This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-10-19Merge branch 'maint'Libravatar Shawn O. Pearce1-1/+4
* maint: Further 1.5.3.5 fixes described in release notes Avoid invoking diff drivers during git-stash attr: fix segfault in gitattributes parsing code Define NI_MAXSERV if not defined by operating system Ensure we add directories in the correct order Avoid scary errors about tagged trees/blobs during git-fetch
2007-10-18attr: fix segfault in gitattributes parsing codeLibravatar Steffen Prohaska1-1/+4
git may segfault if gitattributes contains an invalid entry. A test is added to t0020 that triggers the segfault. The parsing code is fixed to avoid the crash. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-09-18Use xmemdupz() in many places.Libravatar Pierre Habouzit1-6/+1
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-14attr.c: read .gitattributes from index as well.Libravatar Junio C Hamano1-2/+59
This makes .gitattributes files to be read from the index when they are not checked out to the work tree. This is in line with the way we always allowed low-level tools to operate in sparsely checked out work tree in a reasonable way. It swaps the order of new file creation and converting the blob to work tree representation; otherwise when we are in the middle of checking out .gitattributes we would notice an empty but unwritten .gitattributes file in the work tree and will ignore the copy in the index. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-14attr.c: refactoringLibravatar Junio C Hamano1-26/+41
This splits out a common routine that parses a single line of attribute file and adds it to the attr_stack. It should not change any behaviour, other than attrs array in the attr_stack structure is now grown with alloc_nr() macro, instead of one by one, which relied on xrealloc() to give enough slack to be efficient enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-04-22Fix crash in t0020 (crlf conversion)Libravatar Alex Riesen1-2/+4
Reallocated wrong size. Noticed on Ubuntu 7.04 probably because it has some malloc diagnostics in libc: "git-read-tree --reset -u HEAD" aborted in the test. Valgrind sped up the debugging greatly: took me 10 minutes. Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-18Fix funny types used in attribute value representationLibravatar Junio C Hamano1-7/+13
It was bothering me a lot that I abused small integer values casted to (void *) to represent non string values in gitattributes. This corrects it by making the type of attribute values (const char *), and using the address of a few statically allocated character buffer to denote true/false. Unset attributes are represented as having NULLs as their values. Added in-header documentation to explain how git_checkattr() routine should be called. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-17Allow more than true/false to attributes.Libravatar Junio C Hamano1-71/+123
This allows you to define three values (and possibly more) to each attribute: true, false, and unset. Typically the handlers that notice and act on attribute values treat "unset" attribute to mean "do your default thing" (e.g. crlf that is unset would trigger "guess from contents"), so being able to override a setting to an unset state is actually useful. - If you want to set the attribute value to true, have an entry in .gitattributes file that mentions the attribute name; e.g. *.o binary - If you want to set the attribute value explicitly to false, use '-'; e.g. *.a -diff - If you want to make the attribute value _unset_, perhaps to override an earlier entry, use '!'; e.g. *.a -diff c.i.a !diff This also allows string values to attributes, with the natural syntax: attrname=attrvalue but you cannot use it, as nobody takes notice and acts on it yet. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-15Change attribute negation marker from '!' to '-'.Libravatar Junio C Hamano1-5/+46
At the same time, we do not want to allow arbitrary strings for attribute names, as we are likely to want to extend the syntax later. Allow only alnum, dash, underscore and dot for now. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-15Define a built-in attribute macro "binary".Libravatar Junio C Hamano1-0/+1
For binary files we would want to disable textual diff generation and automatic crlf conversion. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-15attribute macro supportLibravatar Junio C Hamano1-48/+131
This adds "attribute macros" (for lack of better name). So far, we have low-level attributes such as crlf and diff, which are defined in operational terms --- setting or unsetting them on a particular path directly affects what is done to the path. For example, in order to decline diffs or crlf conversions on a binary blob, no diffs on PostScript files, and treat all other files normally, you would have something like these: * diff crlf *.ps !diff proprietary.o !diff !crlf That is fine as the operation goes, but gets unwieldy rather rapidly, when we start adding more low-level attributes that are defined in operational terms. A near-term example of such an attribute would be 'merge-3way' which would control if git should attempt the usual 3-way file-level merge internally, or leave merging to a specialized external program of user's choice. When it is added, we do _not_ want to force the users to update the above to: * diff crlf merge-3way *.ps !diff proprietary.o !diff !crlf !merge-3way The way this patch solves this issue is to realize that the attributes the user is assigning to paths are not defined in terms of operations but in terms of what they are. All of the three low-level attributes usually make sense for most of the files that sane SCM users have git operate on (these files are typically called "text'). Only a few cases, such as binary blob, need exception to decline the "usual treatment given to text files" -- and people mark them as "binary". So this allows the $GIT_DIR/info/alternates and .gitattributes at the toplevel of the project to also specify attributes that assigns other attributes. The syntax is '[attr]' followed by an attribute name followed by a list of attribute names: [attr] binary !diff !crlf !merge-3way When "binary" attribute is set to a path, if the path has not got diff/crlf/merge-3way attribute set or unset by other rules, this rule unsets the three low-level attributes. It is expected that the user level .gitattributes will be expressed mostly in terms of attributes based on what the files are, and the above sample would become like this: (built-in attribute configuration) [attr] binary !diff !crlf !merge-3way * diff crlf merge-3way (project specific .gitattributes) proprietary.o binary (user preference $GIT_DIR/info/attributes) *.ps !diff There are a few caveats. * As described above, you can define these macros only in $GIT_DIR/info/attributes and toplevel .gitattributes. * There is no attempt to detect circular definition of macro attributes, and definitions are evaluated from bottom to top as usual to fill in other attributes that have not yet got values. The following would work as expected: [attr] text diff crlf [attr] ps text !diff *.ps ps while this would most likely not (I haven't tried): [attr] ps text !diff [attr] text diff crlf *.ps ps * When a macro says "[attr] A B !C", saying that a path does not have attribute A does not let you tell anything about attributes B or C. That is, given this: [attr] text diff crlf [attr] ps text !diff *.txt !ps path hello.txt, which would match "*.txt" pattern, would have "ps" attribute set to zero, but that does not make text attribute of hello.txt set to false (nor diff attribute set to true). Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14Teach 'diff' about 'diff' attribute.Libravatar Junio C Hamano1-18/+0
This makes paths that explicitly unset 'diff' attribute not to produce "textual" diffs from 'git-diff' family. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14Define 'crlf' attribute.Libravatar Junio C Hamano1-0/+18
This defines the semantics of 'crlf' attribute as an example. When a path has this attribute unset (i.e. '!crlf'), autocrlf line-end conversion is not applied. Eventually we would want to let users to build a pipeline of processing to munge blob data to filesystem format (and in the other direction) based on combination of attributes, and at that point the mechanism in convert_to_{git,working_tree}() that looks at 'crlf' attribute needs to be enhanced. Perhaps the existing 'crlf' would become the first step in the input chain, and the last step in the output chain. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-14Add basic infrastructure to assign attributes to pathsLibravatar Junio C Hamano1-0/+380
This adds the basic infrastructure to assign attributes to paths, in a way similar to what the exclusion mechanism does based on $GIT_DIR/info/exclude and .gitignore files. An attribute is just a simple string that does not contain any whitespace. They can be specified in $GIT_DIR/info/attributes file, and .gitattributes file in each directory. Each line in these files defines a pattern matching rule. Similar to the exclusion mechanism, a later match overrides an earlier match in the same file, and entries from .gitattributes file in the same directory takes precedence over the ones from parent directories. Lines in $GIT_DIR/info/attributes file are used as the lowest precedence default rules. A line is either a comment (an empty line, or a line that begins with a '#'), or a rule, which is a whitespace separated list of tokens. The first token on the line is a shell glob pattern. The rest are names of attributes, each of which can optionally be prefixed with '!'. Such a line means "if a path matches this glob, this attribute is set (or unset -- if the attribute name is prefixed with '!'). For glob matching, the same "if the pattern does not have a slash in it, the basename of the path is matched with fnmatch(3) against the pattern, otherwise, the path is matched with the pattern with FNM_PATHNAME" rule as the exclusion mechanism is used. This does not define what an attribute means. Tying an attribute to various effects it has on git operation for paths that have it will be specified separately. Signed-off-by: Junio C Hamano <junkio@cox.net>