summaryrefslogtreecommitdiff
path: root/apply.h
AgeCommit message (Collapse)AuthorFilesLines
2018-05-29apply: add --intent-to-addLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Similar to 'git reset -N', this option makes 'git apply' automatically mark new files as intent-to-add so they are visible in the following 'git diff' command and could also be committed with 'git commit -a'. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06apply: remove `newfd` from `struct apply_state`Libravatar Martin Ågren1-2/+1
Similar to a previous patch, we do not need to use `newfd` to signal that we have a lockfile to clean up. We can just unconditionally call `rollback_lock_file`. If we do not hold the lock, it will be a no-op. Where we check `newfd` to decide whether we need to take the lock, we can instead use `is_lock_file_locked()`. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-06apply: move lockfile into `apply_state`Libravatar Martin Ågren1-3/+2
We have two users of `struct apply_state` and the related functionality in apply.c. Each user sets up its `apply_state` by handing over a pointer to its static `lock_file`. (Before 076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05), we could never free lockfiles, so making them static was a reasonable approach.) Other than that, they never directly access their `lock_file`s, which are instead handled by the functionality in apply.c. To make life easier for the caller and to make it less tempting for a future caller to mess with the lock, make apply.c fully responsible for setting up the `lock_file`. As mentioned above, it is now safe to free a `lock_file`, so we can make the `struct apply_state` contain an actual `struct lock_file` instead of a pointer to one. The user in builtin/apply.c is rather simple. For builtin/am.c, we might worry that the lock state is actually meant to be inherited across calls. But the lock is only taken as `apply_all_patches()` executes, and code inspection shows that it will always be released. Alternatively, we can observe that the lock itself is never queried directly. When we decide whether we should lock, we check a related variable `newfd`. That variable is not inherited, so from the point of view of apply.c, the state machine really is reset with each call to `init_apply_state()`. (It would be a bug if `newfd` and the lock status were not in sync. The duplication of information in `newfd` and the lock will be addressed in the next patch.) Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-09apply: remove prefix_length member from apply_stateLibravatar René Scharfe1-1/+0
Use a NULL-and-NUL check to see if we have a prefix and consistently use C string functions on it instead of storing its length in a member of struct apply_state. This avoids strlen() calls and simplifies the code. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: learn to use a different index fileLibravatar Christian Couder1-0/+1
Sometimes we want to apply in a different index file. Before the apply functionality was libified it was possible to use the GIT_INDEX_FILE environment variable, for this purpose. But now, as the apply functionality has been libified, it should be possible to do that in a libified way. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: refactor `git apply` option parsingLibravatar Christian Couder1-14/+4
Parsing `git apply` options can be useful to other commands that want to call the libified apply functionality, because this way they can easily pass some options from their own command line to the libified apply functionality. This will be used by `git am` in a following patch. To make this possible, let's refactor the `git apply` option parsing code into a new libified apply_parse_options() function. Doing that makes it possible to remove some functions definitions from "apply.h" and make them static in "apply.c". Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: change error_routine when silentLibravatar Christian Couder1-0/+8
To avoid printing anything when applying with `state->apply_verbosity == verbosity_silent`, let's save the existing warn and error routines before applying, and let's replace them with a routine that does nothing. Then after applying, let's restore the saved routines. Note that, as we need to restore the saved routines in all cases, we cannot return early any more in apply_all_patches(). Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: make it possible to silently applyLibravatar Christian Couder1-1/+7
This changes 'int apply_verbosely' into 'enum apply_verbosity', and changes the possible values of the variable from a bool to a tristate. The previous 'false' state is changed into 'verbosity_normal'. The previous 'true' state is changed into 'verbosity_verbose'. The new added state is 'verbosity_silent'. It should prevent anything to be printed on both stderr and stdout. This is needed because `git am` wants to first call apply functionality silently, if it can then fall back on 3-way merge in case of error. Printing on stdout, and calls to warning() or error() are not taken care of in this patch, as that will be done in following patches. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: make some parsing functions static againLibravatar Christian Couder1-5/+0
Some parsing functions that were used in both "apply.c" and "builtin/apply.c" are now only used in the former, so they can be made static to "apply.c". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: move libified code from builtin/apply.c to apply.{c,h}Libravatar Christian Couder1-0/+19
As most of the apply code in builtin/apply.c has been libified by a number of previous commits, it can now be moved to apply.{c,h}, so that more code can use it. Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07apply: rename and move opt constants to apply.hLibravatar Christian Couder1-0/+7
The constants for the "inaccurate-eof" and the "recount" options will be used in both "apply.c" and "builtin/apply.c", so they need to go into "apply.h", and therefore they need a name that is more specific to the API they belong to. Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11builtin/apply: move check_apply_state() to apply.cLibravatar Christian Couder1-0/+1
To libify `git apply` functionality we must make check_apply_state() usable outside "builtin/apply.c". Let's do that by moving it into "apply.c". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11apply: make init_apply_state() return -1 instead of exit()ingLibravatar Christian Couder1-3/+3
To libify `git apply` functionality we have to signal errors to the caller instead of exit()ing. To do that in a compatible manner with the rest of the error handling in "builtin/apply.c", init_apply_state() should return -1 instead of calling exit(). Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11builtin/apply: move init_apply_state() to apply.cLibravatar Christian Couder1-0/+10
To libify `git apply` functionality we must make init_apply_state() usable outside "builtin/apply.c". Let's do that by moving it into a new "apply.c". Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11apply: move 'struct apply_state' to apply.hLibravatar Christian Couder1-0/+100
To libify `git apply` functionality we must make 'struct apply_state' usable outside "builtin/apply.c". Let's do that by creating a new "apply.h" and moving 'struct apply_state' there. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>