summaryrefslogtreecommitdiff
path: root/apply.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-18Merge branch 'ab/unreachable-break'Libravatar Junio C Hamano1-2/+0
Code clean-up. * ab/unreachable-break: style: do not "break" in switch() after "return"
2020-12-15style: do not "break" in switch() after "return"Libravatar Ævar Arnfjörð Bjarmason1-2/+0
Remove this unreachable code. It was found by SunCC, it's found by a non-fatal warning emitted by SunCC. It's one of the things it's more vehement about than GCC & Clang. It complains about a lot of other similarly unreachable code, e.g. a BUG(...) without a "return", and a "return 0" after a long if/else, both of whom have "return" statements. Those are also genuine redundancies to a compiler, but arguably make the code a bit easier to read & less fragile to maintain. These return/break cases are just unnecessary however, and as seen here the surrounding code just did a plain "return" without a "break" already. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-12-08Merge branch 'mt/do-not-use-scld-in-working-tree'Libravatar Junio C Hamano1-1/+1
"git apply" adjusted the permission bits of working-tree files and directories according core.sharedRepository setting by mistake and for a long time, which has been corrected. * mt/do-not-use-scld-in-working-tree: apply: don't use core.sharedRepository to create working tree files
2020-12-02apply: don't use core.sharedRepository to create working tree filesLibravatar Matheus Tavares1-1/+1
core.sharedRepository defines which permissions Git should set when creating files in $GIT_DIR, so that the repository may be shared with other users. But (in its current form) the setting shouldn't affect how files are created in the working tree. This is not respected by apply and am (which uses apply), when creating leading directories: $ cat d.patch diff --git a/d/f b/d/f new file mode 100644 index 0000000..e69de29 Apply without the setting: $ umask 0077 $ git apply d.patch $ ls -ld d drwx------ Apply with the setting: $ umask 0077 $ git -c core.sharedRepository=0770 apply d.patch $ ls -ld d drwxrws--- Only the leading directories are affected. That's because they are created with safe_create_leading_directories(), which calls adjust_shared_perm() to set the directories' permissions based on core.sharedRepository. To fix that, let's introduce a variant of this function that ignores the setting, and use it in apply. Also add a regression test and a note in the function documentation about the use of each variant according to the destination (working tree or git dir). Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-10-20apply: when -R, also reverse list of sectionsLibravatar Jonathan Tan1-2/+7
A patch changing a symlink into a file is written with 2 sections (in the code, represented as "struct patch"): firstly, the deletion of the symlink, and secondly, the creation of the file. When applying that patch with -R, the sections are reversed, so we get: (1) creation of a symlink, then (2) deletion of a file. This causes an issue when the "deletion of a file" section is checked, because Git observes that the so-called file is not a file but a symlink, resulting in a "wrong type" error message. What we want is: (1) deletion of a file, then (2) creation of a symlink. In the code, this is reflected in the behavior of previous_patch() when invoked from check_preimage() when the deletion is checked. Creation then deletion means that when the deletion is checked, previous_patch() returns the creation section, triggering a mode conflict resulting in the "wrong type" error message. But deletion then creation means that when the deletion is checked, previous_patch() returns NULL, so the deletion mode is checked against lstat, which is what we want. There are also other ways a patch can contain 2 sections referencing the same file, for example, in 7a07841c0b ("git-apply: handle a patch that touches the same path more than once better", 2008-06-27). "git apply -R" fails in the same way, and this commit makes this case succeed. Therefore, when building the list of sections, build them in reverse order (by adding to the front of the list instead of the back) when -R is passed. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-27Merge branch 'jk/leakfix'Libravatar Junio C Hamano1-2/+2
Code clean-up. * jk/leakfix: submodule--helper: fix leak of core.worktree value config: fix leak in git_config_get_expiry_in_days() config: drop git_config_get_string_const() config: fix leaks from git_config_get_string_const() checkout: fix leak of non-existent branch names submodule--helper: use strbuf_release() to free strbufs clear_pattern_list(): clear embedded hashmaps
2020-08-17Merge branch 'rp/apply-cached-with-i-t-a'Libravatar Junio C Hamano1-4/+21
Recent versions of "git diff-files" shows a diff between the index and the working tree for "intent-to-add" paths as a "new file" patch; "git apply --cached" should be able to take "git diff-files" and should act as an equivalent to "git add" for the path, but the command failed to do so for such a path. * rp/apply-cached-with-i-t-a: t4140: test apply with i-t-a paths apply: make i-t-a entries never match worktree apply: allow "new file" patches on i-t-a entries
2020-08-17config: drop git_config_get_string_const()Libravatar Jeff King1-2/+2
As evidenced by the leak fixes in the previous commit, the "const" in git_config_get_string_const() clearly misleads people into thinking that it does not allocate a copy of the string. We can fix this by renaming it, but it's easier still to just drop it. Of the four remaining callers: - The one in git_config_parse_expiry() still needs to allocate, since that's what its callers expect. We can just use the non-const version and cast our pointer. Slightly ugly, but the damage is contained in one spot. - The two in apply are writing to global "const char *" variables, and need to continue allocating. We often mark these as const because we assign default string literals to them. But in this case we don't do that, so we can just declare them as real "char *" pointers and use the non-const version. - The call in checkout doesn't actually need a copy; it can just use the non-allocating "tmp" version of the function. The function is also mentioned in the MyFirstContribution document. We can swap that call out for the non-allocating "tmp" variant, which fits well in the example given. We'll drop the "configset" and "repo" variants, as well (which are unused). Note that this frees up the "const" name, so we could rename the "tmp" variant back to that. But let's give some time for topics in flight to adapt to the new code before doing so (if we do it too soon, the function semantics will change but the compiler won't alert us). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-09apply: make i-t-a entries never match worktreeLibravatar Raymond E. Pasco1-5/+19
By definition, an intent-to-add index entry can never match the worktree, because worktrees have no concept of intent-to-add entries. Therefore, "apply --index" should always fail on intent-to-add paths. Because check_preimage() calls verify_index_match(), it already fails for patches other than creation patches, which check_preimage() ignores. This patch adds a check to check_preimage()'s rough equivalent for creation patches, check_to_create(). Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Raymond E. Pasco <ray@ameretat.dev> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-06apply: allow "new file" patches on i-t-a entriesLibravatar Raymond E. Pasco1-4/+7
diff-files recently changed to treat changes to paths marked "intent to add" in the index as new file diffs rather than diffs from the empty blob. However, apply refuses to apply new file diffs on top of existing index entries, except in the case of renames. This causes "git add -p", which uses apply, to fail when attempting to stage hunks from a file when intent to add has been recorded. This changes the logic in check_to_create() which checks if an entry already exists in an index in two ways: first, we only search for an index entry at all if ok_if_exists is false; second, we check for the CE_INTENT_TO_ADD flag on any index entries we find and allow the apply to proceed if it is set. Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Raymond E. Pasco <ray@ameretat.dev> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-06apply: do not lazy fetch when applying binaryLibravatar Jonathan Tan1-1/+1
When applying a binary patch, as an optimization, "apply" checks if the postimage is already present. During this fetch, it is perfectly expected for the postimage not to be present, so there is no need to lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this case. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-28Use OPT_CALLBACK and OPT_CALLBACK_FLibravatar Denton Liu1-14/+14
In the codebase, there are many options which use OPTION_CALLBACK in a plain ol' struct definition. However, we have the OPT_CALLBACK and OPT_CALLBACK_F macros which are meant to abstract these plain struct definitions away. These macros are useful as they semantically signal to developers that these are just normal callback option with nothing fancy happening. Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or OPT_CALLBACK_F where applicable. The heavy lifting was done using the following (disgusting) shell script: #!/bin/sh do_replacement () { tr '\n' '\r' | sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' | sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' | tr '\r' '\n' } for f in $(git ls-files \*.c) do do_replacement <"$f" >"$f.tmp" mv "$f.tmp" "$f" done The result was manually inspected and then reformatted to match the style of the surrounding code. Finally, using `git grep OPTION_CALLBACK \*.c`, leftover results which were not handled by the script were manually transformed. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-16convert: permit passing additional metadata to filter processesLibravatar brian m. carlson1-1/+1
There are a variety of situations where a filter process can make use of some additional metadata. For example, some people find the ident filter too limiting and would like to include the commit or the branch in their smudged files. This information isn't available during checkout as HEAD hasn't been updated at that point, and it wouldn't be available in archives either. Let's add a way to pass this metadata down to the filter. We pass the blob we're operating on, the treeish (preferring the commit over the tree if one exists), and the ref we're operating on. Note that we won't pass this information in all cases, such as when renormalizing or when we're performing diffs, since it doesn't make sense in those cases. The data we currently get from the filter process looks like the following: command=smudge pathname=git.c 0000 With this change, we'll get data more like this: command=smudge pathname=git.c refname=refs/tags/v2.25.1 treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b blob=7be7ad34bd053884ec48923706e70c81719a8660 0000 There are a couple things to note about this approach. For operations like checkout, treeish will always be a commit, since we cannot check out individual trees, but for other operations, like archive, we can end up operating on only a particular tree, so we'll provide only a tree as the treeish. Similar comments apply for refname, since there are a variety of cases in which we won't have a ref. This commit wires up the code to print this information, but doesn't pass any of it at this point. In a future commit, we'll have various code paths pass the actual useful data down. Signed-off-by: brian m. carlson <bk2204@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-31sha1-file: pass git_hash_algo to hash_object_file()Libravatar Matheus Tavares1-2/+4
Allow hash_object_file() to work on arbitrary repos by introducing a git_hash_algo parameter. Change callers which have a struct repository pointer in their scope to pass on the git_hash_algo from the said repo. For all other callers, pass on the_hash_algo, which was already being used internally at hash_object_file(). This functionality will be used in the following patch to make check_object_signature() be able to work on arbitrary repos (which, in turn, will be used to fix an inconsistency at object.c:parse_object()). Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-16Merge branch 'js/add-i-a-bit-more-tests'Libravatar Junio C Hamano1-0/+10
Test coverage update in preparation for further work on "git add -i". * js/add-i-a-bit-more-tests: apply --allow-overlap: fix a corner case git add -p: use non-zero exit code when the diff generation failed t3701: verify that the diff.algorithm config setting is handled t3701: verify the shown messages when nothing can be added t3701: add a test for the different `add -p` prompts t3701: avoid depending on the TTY prerequisite t3701: add a test for advanced split-hunk editing
2019-12-06Merge branch 'jk/lore-is-the-archive'Libravatar Junio C Hamano1-1/+1
Doc update for the mailing list archiving and nntp service. * jk/lore-is-the-archive: doc: replace public-inbox links with lore.kernel.org doc: recommend lore.kernel.org over public-inbox.org
2019-12-06apply --allow-overlap: fix a corner caseLibravatar Johannes Schindelin1-0/+10
Yes, yes, this is supposed to be only a band-aid option for `git add -p` not Doing The Right Thing. But as long as we carry the `--allow-overlap` option, we might just as well get it right. This fixes the case where one hunk inserts a line before the first line, and is followed by a hunk whose context overlaps with the first one's and which appends a line at the end. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-01Merge branch 'en/doc-typofix'Libravatar Junio C Hamano1-2/+2
Docfix. * en/doc-typofix: Fix spelling errors in no-longer-updated-from-upstream modules multimail: fix a few simple spelling errors sha1dc: fix trivial comment spelling error Fix spelling errors in test commands Fix spelling errors in messages shown to users Fix spelling errors in names of tests Fix spelling errors in comments of testcases Fix spelling errors in code comments Fix spelling errors in documentation outside of Documentation/ Documentation: fix a bunch of typos, both old and new
2019-11-30doc: replace public-inbox links with lore.kernel.orgLibravatar Jeff King1-1/+1
Since we're now recommending lore.kernel.org (and because the public-inbox.org domain might eventually go away), let's update our internal references to use it, too. That future-proofs our references, and sets the example we want people to follow. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-10Merge branch 'dl/apply-3way-diff3'Libravatar Junio C Hamano1-1/+1
"git apply --3way" learned to honor merge.conflictStyle configuration variable, like merges would. * dl/apply-3way-diff3: apply: respect merge.conflictStyle in --3way t4108: demonstrate bug in apply t4108: use `test_config` instead of `git config` t4108: remove git command upstream of pipe t4108: replace create_file with test_write_lines
2019-11-10Fix spelling errors in code commentsLibravatar Elijah Newren1-2/+2
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-24apply: respect merge.conflictStyle in --3wayLibravatar Denton Liu1-1/+1
Before, when doing a 3-way merge, the merge.conflictStyle option was not respected and the "merge" style was always used, even if "diff3" was specified. Call git_xmerge_config() at the end of git_apply_config() so that the merge.conflictStyle config is read. Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-15Merge branch 'tg/range-diff-output-update'Libravatar Junio C Hamano1-21/+22
"git range-diff" failed to handle mode-only change, which has been corrected. * tg/range-diff-output-update: range-diff: don't segfault with mode-only changes
2019-10-09range-diff: don't segfault with mode-only changesLibravatar Thomas Gummerer1-21/+22
In ef283b3699 ("apply: make parse_git_diff_header public", 2019-07-11) the 'parse_git_diff_header' function was made public and useable by callers outside of apply.c. However it was missed that its (then) only caller, 'find_header' did some error handling, and completing 'struct patch' appropriately. range-diff then started using this function, and tried to handle this appropriately itself, but fell short in some cases. This in turn would lead to range-diff segfaulting when there are mode-only changes in a range. Move the error handling and completing of the struct into the 'parse_git_diff_header' function, so other callers can take advantage of it. This fixes the segfault in 'git range-diff'. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-09Merge branch 'bc/reread-attributes-during-rebase'Libravatar Junio C Hamano1-0/+11
The "git am" based backend of "git rebase" ignored the result of updating ".gitattributes" done in one step when replaying subsequent steps. * bc/reread-attributes-during-rebase: am: reload .gitattributes after patching it path: add a function to check for path suffix
2019-09-03am: reload .gitattributes after patching itLibravatar brian m. carlson1-0/+11
When applying multiple patches with git am, or when rebasing using the am backend, it's possible that one of our patches has updated a gitattributes file. Currently, we cache this information, so if a file in a subsequent patch has attributes applied, the file will be written out with the attributes in place as of the time we started the rebase or am operation, not with the attributes applied by the previous patch. This problem does not occur when using the -m or -i flags to rebase. To ensure we write the correct data into the working tree, expire the cache after each patch that touches a path ending in ".gitattributes". Since we load these attributes in multiple separate files, we must expire them accordingly. Verify that both the am and rebase code paths work correctly, including the conflict marker size with am -3. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11apply: make parse_git_diff_header publicLibravatar Thomas Gummerer1-50/+19
Make 'parse_git_header()' (renamed to 'parse_git_diff_header()') a "public" function in apply.h, so we can re-use it in range-diff in a subsequent commit. We're renaming the function to make it clearer in other parts of the codebase that we're talking about a diff header and not just any header. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11apply: only pass required data to gitdiff_* functionsLibravatar Thomas Gummerer1-24/+35
Currently the 'gitdiff_*()' functions take 'struct apply_state' as parameter, even though they only needs the root, linenr and p_value from that struct. These functions are in the callchain of 'parse_git_header()', which we want to make more generally useful in a subsequent commit. To make that happen we only want to pass in the required data to 'parse_git_header()', and not the whole 'struct apply_state', and thus we want functions in the callchain of 'parse_git_header()' to only take arguments they really need. As these functions are called in a loop using their function pointers, each function needs to be passed all the parameters even if only one of the functions actually needs it. We therefore pass this data along in a struct to avoid adding too many unused parameters to each function and making the code very verbose in the process. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-09apply: only pass required data to find_name_*Libravatar Thomas Gummerer1-24/+24
Currently the 'find_name_*()' functions take 'struct apply_state' as parameter, even though they only need the 'root' member from that struct. These functions are in the callchain of 'parse_git_header()', which we want to make more generally useful in a subsequent commit. To make that happen we only want to pass in the required data to 'parse_git_header()', and not the whole 'struct apply_state', and thus we want functions in the callchain of 'parse_git_header()' to only take arguments they really need. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-09apply: only pass required data to check_header_lineLibravatar Thomas Gummerer1-4/+4
Currently the 'check_header_line()' function takes 'struct apply_state' as parameter, even though it only needs the linenr from that struct. This function is in the callchain of 'parse_git_header()', which we want to make more generally useful in a subsequent commit. To make that happen we only want to pass in the required data to 'parse_git_header()', and not the whole 'struct apply_state', and thus we want functions in the callchain of 'parse_git_header()' to only take arguments they really need. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-09apply: only pass required data to git_header_nameLibravatar Thomas Gummerer1-8/+8
Currently the 'git_header_name()' function takes 'struct apply_state' as parameter, even though it only needs the p_value from that struct. This function is in the callchain of 'parse_git_header()', which we want to make more generally useful in a subsequent commit. To make that happen we only want to pass in the required data to 'parse_git_header()', and not the whole 'struct apply_state', and thus we want functions in the callchain of 'parse_git_header()' to only take arguments they really need. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-09apply: only pass required data to skip_tree_prefixLibravatar Thomas Gummerer1-9/+9
Currently the 'skip_tree_prefix()' function takes 'struct apply_state' as parameter, even though it only needs the p_value from that struct. This function is in the callchain of 'parse_git_header()', which we want to make more generally useful in a subsequent commit. To make that happen we only want to pass in the required data to 'parse_git_header()', and not the whole 'struct apply_state', and thus we want functions in the callchain of 'parse_git_header()' to only take arguments they really need. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-09apply: replace marc.info link with public-inboxLibravatar Thomas Gummerer1-1/+1
public-inbox.org links include the whole message ID by default. This means the message can still be found even if the site goes away, which is not the case with the marc.info link. Replace the marc.info link with a more future proof one. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-28fill_stat_cache_info(): prepare for an fsmonitor fixLibravatar Johannes Schindelin1-1/+1
We will need to pass down the `struct index_state` to `mark_fsmonitor_valid()` for an upcoming bug fix, and this here function calls that there function, so we need to extend the signature of `fill_stat_cache_info()` first. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-20completion: add more parameter value completionLibravatar Nguyễn Thái Ngọc Duy1-0/+4
This adds value completion for a couple more paramters. To make it easier to maintain these hard coded lists, add a comment at the original list/code to remind people to update git-completion.bash too. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-06Merge branch 'jk/loose-object-cache-oid'Libravatar Junio C Hamano1-1/+1
Code clean-up. * jk/loose-object-cache-oid: prefer "hash mismatch" to "sha1 mismatch" sha1-file: avoid "sha1 file" for generic use in messages sha1-file: prefer "loose object file" to "sha1 file" in messages sha1-file: drop has_sha1_file() convert has_sha1_file() callers to has_object_file() sha1-file: convert pass-through functions to object_id sha1-file: modernize loose header/stream functions sha1-file: modernize loose object file functions http: use struct object_id instead of bare sha1 update comment references to sha1_object_info() sha1-file: fix outdated sha1 comment references
2019-02-06Merge branch 'jk/unused-parameter-cleanup'Libravatar Junio C Hamano1-3/+2
Code cleanup. * jk/unused-parameter-cleanup: convert: drop path parameter from actual conversion functions convert: drop len parameter from conversion checks config: drop unused parameter from maybe_remove_section() show_date_relative(): drop unused "tz" parameter column: drop unused "opts" parameter in item_length() create_bundle(): drop unused "header" parameter apply: drop unused "def" parameter from find_name_gnu() match-trees: drop unused path parameter from score functions
2019-02-06Merge branch 'nd/the-index-final'Libravatar Junio C Hamano1-2/+3
The assumption to work on the single "in-core index" instance has been reduced from the library-ish part of the codebase. * nd/the-index-final: cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch read-cache.c: remove the_* from index_has_changes() merge-recursive.c: remove implicit dependency on the_repository merge-recursive.c: remove implicit dependency on the_index sha1-name.c: remove implicit dependency on the_index read-cache.c: replace update_index_if_able with repo_& read-cache.c: kill read_index() checkout: avoid the_index when possible repository.c: replace hold_locked_index() with repo_hold_locked_index() notes-utils.c: remove the_repository references grep: use grep_opt->repo instead of explict repo argument
2019-01-24apply: drop unused "def" parameter from find_name_gnu()Libravatar Jeff King1-3/+2
We use the "def" parameter in find_name_common() for some heuristics, but they are not necessary with the less-ambiguous GNU format. Let's drop this unused parameter. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14Merge branch 'nd/checkout-noisy'Libravatar Junio C Hamano1-1/+2
"git checkout [<tree-ish>] path..." learned to report the number of paths that have been checked out of the index or the tree-ish, which gives it the same degree of noisy-ness as the case in which the command checks out a branch. * nd/checkout-noisy: t0027: squelch checkout path run outside test_expect_* block checkout: print something when checking out paths
2019-01-14read-cache.c: kill read_index()Libravatar Nguyễn Thái Ngọc Duy1-1/+1
read_index() shares the same problem as hold_locked_index(): it assumes $GIT_DIR/index. Move all call sites to repo_read_index() instead. read_index_preload() and read_index_unmerged() are also killed as a consequence. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14repository.c: replace hold_locked_index() with repo_hold_locked_index()Libravatar Nguyễn Thái Ngọc Duy1-1/+2
hold_locked_index() assumes the index path at $GIT_DIR/index. This is not good for places that take an arbitrary index_state instead of the_index, which is basically everywhere except builtin/. Replace it with repo_hold_locked_index(). hold_locked_index() remains as a wrapper around repo_hold_locked_index() to reduce changes in builtin/ Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-08convert has_sha1_file() callers to has_object_file()Libravatar Jeff King1-1/+1
The only remaining callers of has_sha1_file() actually have an object_id already. They can use the "object" variant, rather than dereferencing the hash themselves. The code changes here were completely generated by the included coccinelle patch. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-18Merge branch 'js/apply-recount-allow-noop'Libravatar Junio C Hamano1-1/+1
When editing a patch in a "git add -i" session, a hunk could be made to no-op. The "git apply" program used to reject a patch with such a no-op hunk to catch user mistakes, but it is now updated to explicitly allow a no-op hunk in an edited patch. * js/apply-recount-allow-noop: apply --recount: allow "no-op hunks"
2018-11-14checkout: print something when checking out pathsLibravatar Nguyễn Thái Ngọc Duy1-1/+2
One of the problems with "git checkout" is that it does so many different things and could confuse people specially when we fail to handle ambiguation correctly. One way to help with that is tell the user what sort of operation is actually carried out. When switching branches, we always print something unless --quiet, either - "HEAD is now at ..." - "Reset branch ..." - "Already on ..." - "Switched to and reset ..." - "Switched to a new branch ..." - "Switched to branch ..." Checking out paths however is silent. Print something so that if we got the user intention wrong, they won't waste too much time to find that out. For the remaining cases of checkout we now print either - "Checked out ... paths out of the index" - "Checked out ... paths out of <abbrev hash>" Since the purpose of printing this is to help disambiguate. Only do it when "--" is missing. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-13apply --recount: allow "no-op hunks"Libravatar Johannes Schindelin1-1/+1
When editing patches e.g. in `git add -e`, it is quite common that a hunk ends up having no -/+ lines, i.e. it is now supposed to do nothing. This use case was broken by ad6e8ed37bc1 (apply: reject a hunk that does not do anything, 2015-06-01) with the good intention of catching a very real, different issue in hand-edited patches. So let's use the `--recount` option as the tell-tale whether the user would actually be okay with no-op hunks. Add a test case to make sure that this use case does not regress again. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06assert NOARG/NONEG behavior of parse-options callbacksLibravatar Jeff King1-0/+18
When we define a parse-options callback, the flags we put in the option struct must match what the callback expects. For example, a callback which does not handle the "unset" parameter should only be used with PARSE_OPT_NONEG. But since the callback and the option struct are not defined next to each other, it's easy to get this wrong (as earlier patches in this series show). Fortunately, the compiler can help us here: compiling with -Wunused-parameters can show us which callbacks ignore their "unset" parameters (and likewise, ones that ignore "arg" expect to be triggered with PARSE_OPT_NOARG). But after we've inspected a callback and determined that all of its callers use the right flags, what do we do next? We'd like to silence the compiler warning, but do so in a way that will catch any wrong calls in the future. We can do that by actually checking those variables and asserting that they match our expectations. Because this is such a common pattern, we'll introduce some helper macros. The resulting messages aren't as descriptive as we could make them, but the file/line information from BUG() is enough to identify the problem (and anyway, the point is that these should never be seen). Each of the annotated callbacks in this patch triggers -Wunused-parameters, and was manually inspected to make sure all callers use the correct options (so none of these BUGs should be triggerable). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06apply: return -1 from option callback instead of calling exit(1)Libravatar Jeff King1-1/+1
The option callback for "apply --whitespace" exits with status "1" on error. It makes more sense for it to just return an error to parse-options. That code will exit, too, but it will use status "129" that is customary for option errors. The exit() dates back to aaf6c447aa (builtin/apply: make parse_whitespace_option() return -1 instead of die()ing, 2016-08-08). That commit gives no reason why we'd prefer the current exit status (it looks like it was just bumping the "die" up a level in the callstack, but did not go as far as it could have). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06apply: mark include/exclude options as NONEGLibravatar Jeff King1-2/+2
The options callback for "git apply --no-include" is not ready to handle the "unset" parameter, and as a result will segfault when it adds a NULL argument to the include list (likewise for "--no-exclude"). In theory this might be used to clear the list, but since both "--include" and "--exclude" add to the same list, it's not immediately obvious what the semantics should be. Let's punt on that for now and just disallow the broken options. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-30Merge branch 'bc/hash-transition-part-15'Libravatar Junio C Hamano1-24/+26
More codepaths are moving away from hardcoded hash sizes. * bc/hash-transition-part-15: rerere: convert to use the_hash_algo submodule: make zero-oid comparison hash function agnostic apply: rename new_sha1_prefix and old_sha1_prefix apply: replace hard-coded constants tag: express constant in terms of the_hash_algo transport: use parse_oid_hex instead of a constant upload-pack: express constants in terms of the_hash_algo refs/packed-backend: express constants using the_hash_algo packfile: express constants in terms of the_hash_algo pack-revindex: express constants in terms of the_hash_algo builtin/fetch-pack: remove constants with parse_oid_hex builtin/mktree: remove hard-coded constant builtin/repack: replace hard-coded constants pack-bitmap-write: use GIT_MAX_RAWSZ for allocation object_id.cocci: match only expressions of type 'struct object_id'