| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The single-key interactive operation used by "git add -p" has been
made more robust.
* pw/single-key-interactive:
add -p: disable stdin buffering when interactive.singlekey is set
terminal: set VMIN and VTIME in non-canonical mode
terminal: pop signal handler when terminal is restored
terminal: always reset terminal when reading without echo
|
|
The builtin "add -p" reads the key "F2" as three separate keys "^[",
"O" and "Q". The "Q" causes it to quit which is probably not what the
user was expecting. This is because it uses poll() to check for
pending input when reading escape sequences but reads the input with
getchar() which is buffered by default and so hoovers up all the
pending input leading poll() think there isn't anything pending. Fix
this by calling setbuf() to disable input buffering if
interactive.singlekey is set.
Looking at the comment above mingw_getchar() in terminal.c I wonder if
that function is papering over this bug and could be removed.
Unfortunately I don't have access to windows to test that.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dcf (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d78 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da9 (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/xcalloc-takes-nelem-first:
fix xcalloc() argument order
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the number of elements first and ther size second, as expected
by xcalloc(). Provide a semantic patch, which was actually used to
generate the rest of this patch.
The semantic patch would generate flip-flop diffs if both arguments
are sizeofs. We don't have such a case, and it's hard to imagine
the usefulness of such an allocation. If it ever occurs then we
could deal with it by duplicating the rule in the semantic patch to
make it cancel itself out, or we could change the code to use
CALLOC_ARRAY.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add -i" failed to honor custom colors configured to show
patches, which has been corrected.
* js/add-i-color-fix:
add -i: verify in the tests that colors can be overridden
add -p: prefer color.diff.context over color.diff.plain
add -i (Perl version): color header to match the C version
add -i (built-in): use the same indentation as the Perl version
add -p (built-in): do not color the progress indicator separately
add -i (built-in): use correct names to load color.diff.* config
add -i (built-in): prevent the `reset` "color" from being configured
add -i: use `reset_color` consistently
add -p (built-in): imitate `xdl_format_hunk_hdr()` generating hunk headers
add -i (built-in): send error messages to stderr
add -i (built-in): do show an error message for incorrect inputs
|
|
Git's diff machinery allows users to override the colors to use in
diffs, even the plain-colored context lines. As of 8dbf3eb6850 (diff.h:
rename DIFF_PLAIN color slot to DIFF_CONTEXT, 2015-05-27), the preferred
name of the config setting is `color.diff.context`, although Git still
allows `color.diff.plain`.
In the context of `git add -p`, this logic is a bit hard to replicate:
`git_diff_basic_config()` reads all config values sequentially and if it
sees _any_ `color.diff.context` or `color.diff.plain`, it accepts the
new color. The Perl version of `git add -p` needs to go through `git
config --get-color`, though, which allows only one key to be specified.
The same goes for the built-in version of `git add -p`, which has to go
through `repo_config_get_value()`.
The best we can do here is to look for `.context` and if none is found,
fall back to looking for `.plain`, and if still not found, fall back to
the hard-coded default (which in this case is simply the empty string,
as context lines are typically rendered without colored).
This still leads to inconsistencies when both config names are used: the
initial diff will be colored by the diff machinery. Once edited by a
user, a hunk has to be re-colored by `git add -p`, though, which would
then use the other setting to color the context lines.
In practice, this is not _all_ that bad. The `git config` manual says
this in the `color.diff.<slot>`:
`context` (context text - `plain` is a historical synonym)
We should therefore assume that users use either one or the other, but
not both names. Besides, it is relatively uncommon to look at a hunk
after editing it because it is immediately staged by default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When copying the spaces used to indent non-flat lists in `git add -i`,
one space was appended by mistake. This makes the output of the built-in
version of `git add -i` inconsistent with the Perl version. Let's adjust
the built-in version to produce the same output as the Perl version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The builtin version of add-interactive mistakenly loads diff colors from
color.interactive.* instead of color.diff.*. It also accidentally spells
`frag` as `fraginfo`.
Let's fix that.
Note also that we don't respect the historical `diff.color.*`. The perl
version never did, and those have been deprecated since 2007.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com>
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl version of that command sneakily uses `git config --get-color`
to figure out the ANSI sequence to reset the color, but passes the empty
string and therefore cannot actually match any config entry.
This was missed when re-implementing the command as a built-in command.
Let's fix this, preventing the `reset` sequence from being overridden
via the config.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl version of that command already does that since a301973641f
(add -p: print errors in separate color, 2009-02-05). The built-in
version's development started by reimplementing the initial version from
5cde71d64af (git-add --interactive, 2006-12-10) for simplicity, though,
which still printed error messages to stdout.
Let's fix that by imitating the Perl version's behavior in the built-in
version of that command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a neat feature in `git add -i` where it allows users to select
items via unique prefixes.
In the built-in version of `git add -i`, we specifically sort the items
(unless they are already sorted) and then perform a binary search to
figure out whether the input constitutes a unique prefix. Unfortunately,
by mistake this code misidentifies matches even if the input string is
not actually a prefix of any item.
For example, in the initial menu, where there is a `status` and an
`update` command, the input `tadaa` was mistaken as a prefix of
`update`.
Let's fix this by looking a bit closer whether the input is actually a
prefix of the item at the found insert index.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are quite a few code locations (e.g. `git clean --interactive`)
where Git asks the user for an answer. In preparation for fixing a bug
shared by all of them, and also to DRY up the code, let's refactor it.
Please note that most of these callers trimmed white-space both at the
beginning and at the end of the answer, instead of trimming only the
end (as the caller in `add-patch.c` does).
Therefore, technically speaking, we change behavior in this patch. At
the same time, it can be argued that this is actually a bug fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of rewriting "add -i/-p" in C.
* js/add-p-leftover-bits:
ci: include the built-in `git add -i` in the `linux-gcc` job
built-in add -p: handle Escape sequences more efficiently
built-in add -p: handle Escape sequences in interactive.singlekey mode
built-in add -p: respect the `interactive.singlekey` config setting
terminal: add a new function to read a single keystroke
terminal: accommodate Git for Windows' default terminal
terminal: make the code of disable_echo() reusable
built-in add -p: handle diff.algorithm
built-in add -p: support interactive.diffFilter
t3701: adjust difffilter test
|
|
The effort to move "git-add--interactive" to C continues.
* js/patch-mode-in-others-in-c:
commit --interactive: make it work with the built-in `add -i`
built-in add -p: implement the "worktree" patch modes
built-in add -p: implement the "checkout" patch modes
built-in stash: use the built-in `git add -p` if so configured
legacy stash -p: respect the add.interactive.usebuiltin setting
built-in add -p: implement the "stash" and "reset" patch modes
built-in add -p: prepare for patch modes other than "stage"
|
|
Minor bugfixes to "git add -i" that has recently been rewritten in C.
* js/builtin-add-i-cmds:
built-in add -i: accept open-ended ranges again
built-in add -i: do not try to `patch`/`diff` an empty list of files
|
|
The interactive `add` command allows selecting multiple files for some
of its sub-commands, via unique prefixes, indices or index ranges.
When re-implementing `git add -i` in C, we even added a code comment
talking about ranges with a missing end index, such as `2-`, but the
code did not actually accept those, as pointed out in
https://github.com/git-for-windows/git/issues/2466#issuecomment-574142760.
Let's fix this, and add a test case to verify that this stays fixed
forever.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user does not select any files to `patch` or `diff`, there is
no need to call `run_add_p()` on them.
Even worse: we _have_ to avoid calling `parse_pathspec()` with an empty
list because that would trigger this error:
BUG: pathspec.c:557: PATHSPEC_PREFER_CWD requires arguments
So let's avoid doing any work on a list of files that is empty anyway.
This fixes https://github.com/git-for-windows/git/issues/2466.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl version of `git add -p` supports this config setting to allow
users to input commands via single characters (as opposed to having to
press the <Enter> key afterwards).
This is an opt-in feature because it requires Perl packages
(Term::ReadKey and Term::Cap, where it tries to handle an absence of the
latter package gracefully) to work. Note that at least on Ubuntu, that
Perl package is not installed by default (it needs to be installed via
`sudo apt-get install libterm-readkey-perl`), so this feature is
probably not used a whole lot.
In C, we obviously do not have these packages available, but we just
introduced `read_single_keystroke()` that is similar to what
Term::ReadKey provides, and we use that here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl version of `git add -p` reads the config setting
`diff.algorithm` and if set, uses it to generate the diff using the
specified algorithm.
This patch ports that functionality to the C version.
Note: just like `git-add--interactive.perl`, we do _not_ respect this
config setting in `git add -i`'s `diff` command, but _only_ in the
`patch` command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl version supports post-processing the colored diff (that is
generated in addition to the uncolored diff, intended to offer a
prettier user experience) by a command configured via that config
setting, and now the built-in version does that, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perl script backing `git add -p` is used not only for that command,
but also for `git stash -p`, `git reset -p` and `git checkout -p`.
In preparation for teaching the C version of `git add -p` to support
also the latter commands, let's abstract away what is "stage" specific
into a dedicated data structure describing the differences between the
patch modes.
Finally, please note that the Perl version tries to make sure that the
diffs are only generated for the modified files. This is not actually
necessary, as the calls to Git's diff machinery already perform that
work, and perform it well. This makes it unnecessary to port the
`FILTER` field of the `%patch_modes` struct, as well as the
`get_diff_reference()` function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like `git add --edit` allows the user to edit the diff before it is
being applied to the index, this feature allows the user to edit the
diff *hunk*.
Naturally, it gets a bit more complicated here because the result has
to play well with the remaining hunks of the overall diff. Therefore,
we have to do a loop in which we let the user edit the hunk, then test
whether the result would work, and if not, drop the edits and let the
user decide whether to try editing the hunk again.
Note: in contrast to the Perl version, we use the same diff
"coalescing" (i.e. merging overlapping hunks into a single one) also for
the check after editing, and we introduce a new flag for that purpose
that asks the `reassemble_patch()` function to pretend that all hunks
were selected for use.
This allows us to continue to run `git apply` *without* the
`--allow-overlap` option (unlike the Perl version), and it also fixes
two known breakages in `t3701-add-interactive.sh` (which we cannot mark
as resolved so far because the Perl script version is still the default
and continues to have those breakages).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When skipping a hunk that adds a different number of lines than it
removes, we need to adjust the subsequent hunk headers of non-skipped
hunks: in pathological cases, the context is not enough to determine
precisely where the patch should be applied.
This problem was identified in 23fea4c240 (t3701: add failing test for
pathological context lines, 2018-03-01) and fixed in the Perl version in
fecc6f3a68 (add -p: adjust offsets of subsequent hunks when one is
skipped, 2018-03-01).
And this patch fixes it in the C version of `git add -p`.
In contrast to the Perl version, we try to keep the extra text on the
hunk header (which typically contains the signature of the function
whose code is changed in the hunk) intact.
Note: while the C version does not support staging mode changes at this
stage, we already prepare for this by simply skipping the hunk header if
both old and new offset is 0 (this cannot happen for regular hunks, and
we will use this as an indicator that we are looking at a special hunk).
Likewise, we already prepare for hunk splitting by handling the absence
of extra text in the hunk header gracefully: only the first split hunk
will have that text, the others will not (indicated by an empty extra
text start/end range). Preparing for hunk splitting already at this
stage avoids an indentation change of the entire hunk header-printing
block later, and is almost as easy to review as without that handling.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code in `git-add--interactive.perl` that takes care of the `patch`
command can look quite intimidating. There are so many modes in which it
can be called, for example.
But for the `patch` command in `git add -i`, only one mode is relevant:
the `stage` mode. And we just implemented the beginnings of that mode in
C so far. So let's use it when `add.interactive.useBuiltin=true`.
Now, while the code in `add-patch.c` is far from reaching feature parity
with the code in `git-add--interactive.perl` (color is not implemented,
the diff algorithm cannot be configured, the colored diff cannot be
post-processed via `interactive.diffFilter`, many commands are
unimplemented yet, etc), hooking it all up with the part of `git add -i`
that is already converted to C makes it easier to test and develop it.
Note: at this stage, both the `add.interactive.useBuiltin` config
setting is still safely opt-in, and will probably be fore quite some
time, to allow for thorough testing "in the wild" without adversely
affecting existing users.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not really want to `exit()` here, of course, as this is safely
libified code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not only laziness that we simply spawn `git diff -p --cached`
here: this command needs to use the pager, and the pager needs to exit
when the diff is done. Currently we do not have any way to make that
happen if we run the diff in-process. So let's just spawn.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Well, it is not a full implementation yet. In the interest of making
this easy to review (and easy to keep bugs out), we still hand off to
the Perl script to do the actual work.
The `patch` functionality actually makes up for more than half of the
1,800+ lines of `git-add--interactive.perl`. It will be ported from Perl
to C incrementally, later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is yet another command, ported to C. It builds nicely on the
support functions introduced for other commands, with the notable
difference that only names are displayed for untracked files, no
file type or diff summary.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a relatively straight-forward port from the Perl version, with
the notable exception that we imitate `git reset -- <paths>` in the C
version rather than the convoluted `git ls-tree HEAD -- <paths> | git
update-index --index-info` followed by `git update-index --force-remove
-- <paths>` for the missed ones.
While at it, we fix the pretty obvious bug where the `revert` command
offers to unstage files that do not have staged changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After `status` and `help`, it is now time to port the `update` command
to C, the second command that is shown in the main loop menu of `git add
-i`.
This `git add -i` command is the first one which lets the user choose a
subset of a list of files, and as such, this patch lays the groundwork
for the other commands of that category:
- It teaches the `print_file_item()` function to show a unique prefix
if we found any (the code to find it had been added already in the
previous patch where we colored the unique prefixes of the main loop
commands, but that patch uses the `print_command_item()` function to
display the menu items).
- This patch also adds the help text that is shown when the user input
to select items from the shown list could not be parsed.
- As `get_modified_files()` clears the list of files, it now has to take
care of clearing the _full_ `prefix_item_list` lest the `sorted` and
`selected` fields go stale and inconsistent.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `update`, `revert` and `add-untracked` commands allow selecting
multiple entries. Let's extend the `list_and_choose()` function to
accommodate those use cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the `update` command of `git add -i`, we are primarily interested in the
list of modified files that have worktree (i.e. unstaged) changes.
At the same time, we need to determine _also_ the staged changes, to be
able to produce the full added/deleted information.
The Perl script version of `git add -i` has a parameter of the
`list_modified()` function for that matter. In C, we can be a lot more
precise, using an `enum`.
The C implementation of the filter also has an easier time to avoid
unnecessary work, simply by using an adaptive order of the `diff-index`
and `diff-files` phases, and then skipping files in the second phase
when they have not been seen in the first phase.
Seeing as we change the meaning of the `phase` field, we rename it to
`mode` to reflect that the order depends on the exact invocation of the
`git add -i` command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During a review, Junio Hamano pointed out that the `rev.prune_data` was
copied from another pathspec but never cleaned up.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error messages as well as the unique prefixes are colored in `git
add -i` by default; We need to do the same in the built-in version.
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, we print out the same colored help text that the
Perl-based `git add -i` prints in the main loop when question mark is
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like in the Perl script `git-add--interactive.perl`, for each
command a unique prefix is determined (if there exists any within the
given parameters), and shown in the list, and accepted as a shortcut for
the command.
To determine the unique prefixes, as well as to look up the command in
question, we use a copy of the list and sort it.
While this might seem like overkill for a single command, it will make
much more sense when all the commands are implemented, and when we reuse
the same logic to present a list of files to edit, with convenient
unique prefixes.
At the start of the development of this patch series, a dedicated data
structure was introduced that imitated the Trie that the Perl version
implements. However, this was deemed overkill, and we now simply sort
the list before determining the length of the unique prefixes by looking
at each item's neighbor. As a bonus, we now use the same sorted list to
perform a binary search using the user-provided prefix as search key.
Original-patch-by: Slavica Đukić <slawica92@hotmail.com>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reason why we did not start with the main loop to begin with is that
it is the first user of `list_and_choose()`, which uses the `list()`
function that we conveniently introduced for use by the `status`
command.
In contrast to the Perl version, in the built-in interactive `add`, we
will keep the `list()` function (which only displays items) and the
`list_and_choose()` function (which uses `list()` to display the items,
and only takes care of the "and choose" part) separate.
The `list_and_choose()` function, as implemented in
`git-add--interactive.perl` knows a few more tricks than the function we
introduce in this patch:
- There is a flag to let the user select multiple items.
- In multi-select mode, the list of items is prefixed with a marker
indicating what items have been selected.
- Initially, for each item a unique prefix is determined (if there
exists any within the given parameters), and shown in the list, and
accepted as a shortcut for the selection.
These features will be implemented in the C version later.
This patch does not add any new main loop command, of course, the
built-in `git add -i` still only supports the `status` command. The
remaining commands to follow over the course of the next commits.
To accommodate for listing the commands in columns, preparing for the
commands that will be implemented over the course of the next
patches/patch series, we teach the `list()` function to do precisely
that.
Note that we only have a prompt ending in a single ">" at this stage;
later commits will add commands that display a double ">>" to indicate
that the user is in a different loop than the main one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For simplicity, we only implemented the `status` command without colors.
This patch starts adding color, matching what the Perl script
`git-add--interactive.perl` does.
Original-Patch-By: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This implements the `status` command of `git add -i`. The data
structures introduced in this commit will be extended later, as needed.
At this point, we re-implement only part of the `list_and_choose()`
function of the Perl script `git-add--interactive.perl` and call it
`list()`. It does not yet color anything, or do columns, or allow user
input.
Over the course of the next commits, we will introduce a
`list_and_choose()` function that uses `list()` to display the list of
options and let the user choose one or more of the displayed items. This
will be used to implement the main loop of the built-in `git add -i`, at
which point the new `status` command can actually be used.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Phillip Wood
Ævar Arnfjörð Bjarmason
René Scharfe
Johannes Schindelin
Elijah Newren
Jeff King
Slavica Đukić
Daniel Ferreira