| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
|
|
Build update.
* ab/make-compdb-fix:
Makefile: pass -Wno-pendantic under GENERATE_COMPILATION_DATABASE=yes
|
|
Improve build procedure for developers.
* ab/auto-depend-with-pedantic:
Makefile: make COMPUTE_HEADER_DEPENDENCIES=auto work with DEVOPTS=pedantic
|
|
"make clean" has been updated to remove leftover .depend/
directories, even when it is not told to use them to compute header
dependencies.
* ab/make-clean-depend-dirs:
Makefile: clean .depend dirs under COMPUTE_HEADER_DEPENDENCIES != yes
|
|
The same bug fixed in the "COMPUTE_HEADER_DEPENDENCIES=auto" mode in
the preceding commit was also present with
"GENERATE_COMPILATION_DATABASE=yes". Let's fix it so it works again
with "DEVOPTS=1".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conditional compilation around versions of libcURL has been
straightened out.
* ab/http-drop-old-curl-plus:
http: don't hardcode the value of CURL_SOCKOPT_OK
http: centralize the accounting of libcurl dependencies
http: correct curl version check for CURLOPT_PINNEDPUBLICKEY
http: correct version check for CURL_HTTP_VERSION_2
http: drop support for curl < 7.18.0 (again)
Makefile: drop support for curl < 7.9.8 (again)
INSTALL: mention that we need libcurl 7.19.4 or newer to build
INSTALL: reword and copy-edit the "libcurl" section
INSTALL: don't mention the "curl" executable at all
|
|
When SANITIZE=leak is specified we'll now add a SANITIZE_LEAK flag to
GIT-BUILD-OPTIONS, this can then be picked up by the test-lib.sh,
which sets a SANITIZE_LEAK prerequisite.
We can then skip specific tests that are known to fail under
SANITIZE=leak, add one such annotation to t0004-unwritable.sh, which
now passes under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "COMPUTE_HEADER_DEPENDENCIES" feature added in [1] was extended to
use auto-detection in [2], that "auto" detection has always piped
STDERR to /dev/null, so any failures on compilers that didn't support
these GCC flags would silently fall back to
"COMPUTE_HEADER_DEPENDENCIES=no".
Later when -Wpedantic support was added to DEVOPTS in [3] we started
passing -Wpedantic in combination with -Werror to the compiler
here. Note (to the pedantic): [3] actually passed "-pedantic", but it
and "-Wpedantic" are synonyms.
Turning on -Wpedantic in [3] broke the auto-detection, since this
relies on compiling an empty program. GCC would loudly complain on
STDERR:
/dev/null:1: error: ISO C forbids an empty translation unit
[-Werror=pedantic]
cc1: note: unrecognized command-line option
‘-Wno-pedantic-ms-format’ may have been intended to silence
earlier diagnostics
cc1: all warnings being treated as errors
But as that ended up in the "$(dep_check)" variable due to the "2>&1"
in [2] we didn't see it.
Then when [4] made DEVOPTS=pedantic the default specifying
"DEVELOPER=1" would effectively set "COMPUTE_HEADER_DEPENDENCIES=no".
To fix these issues let's unconditionally pass -Wno-pedantic after
$(ALL_CFLAGS), we might get a -Wpedantic via config.mak.dev after, or
the builder might specify it via CFLAGS. In either case this will undo
current and future problems with -Wpedantic.
I think it would make sense to simply remove the "2>&1", it would mean
that anyone using a non-GCC-like compiler would get warnings under
COMPUTE_HEADER_DEPENDENCIES=auto, e.g on AIX's xlc would emit:
/opt/IBM/xlc/13.1.3/bin/.orig/xlc: 1501-208 (S) command option D is missing a subargument
Non-zero 40 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
And on Solaris with SunCC:
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
cc: Warning: Option -x passed to ld, if ld is invoked, ignored otherwise
cc: refused to overwrite input file by output file: /dev/null
Non-zero 1 exit with COMPUTE_HEADER_DEPENDENCIES=auto, set it to "yes" or "no" to quiet auto-detect
Both could be quieted by setting COMPUTE_HEADER_DEPENDENCIES=no
explicitly, as suggested, but let's see if this'll fix it without
emitting too much noise at those that aren't using "gcc" or "clang".
1. f2fabbf76e4 (Teach Makefile to check header dependencies,
2010-01-26)
2. 111ee18c31f (Makefile: Use computed header dependencies if the
compiler supports it, 2011-08-18)
3. 729b3925ed9 (Makefile: add a DEVOPTS flag to get pedantic
compilation, 2018-07-24)
4. 6a8cbc41bac (developer: enable pedantic by default, 2021-09-03)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a logic error in dfea575017d (Makefile: lazily compute header
dependencies, 2010-01-26) where we'd make whether we cleaned the
.depend dirs contingent on the currently configured
COMPUTE_HEADER_DEPENDENCIES value. Before this running e.g.:
make COMPUTE_HEADER_DEPENDENCIES=yes grep.o
make COMPUTE_HEADER_DEPENDENCIES=no clean
Would leave behind the .depend directory, now it'll be removed.
Normally we'd need to use another variable, but in this case there's
no other uses of $(dep_dirs), as opposed to $(dep_args) which is used
as an argument to $(CC). So just deleting this line makes everything
work correctly.
See http://lore.kernel.org/git/xmqqmto48ufz.fsf@gitster.g for a report
about this issue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build clean-up for "make tags" and friends.
* ab/make-tags-cleanup:
Makefile: normalize clobbering & xargs for tags targets
Makefile: remove "cscope.out", not "cscope*" in cscope.out target
Makefile: don't use "FORCE" for tags targets
Makefile: add QUIET_GEN to "cscope" target
Makefile: move ".PHONY: cscope" near its target
|
|
Update the build procedure to use the "-pedantic" build when
DEVELOPER makefile macro is in effect.
* cb/pedantic-build-for-developers:
developer: enable pedantic by default
win32: allow building with pedantic mode enabled
gettext: remove optional non-standard parens in N_() definition
|
|
"make INSTALL_STRIP=-s install" allows the installation step to use
"install -s" to strip the binaries as they get installed.
* bs/install-strip:
make: add INSTALL_STRIP option variable
|
|
Build simplification.
* ab/no-more-check-bindir:
Makefile: remove the check_bindir script
|
|
In 1119a15b5c8 (http: drop support for curl < 7.11.1, 2021-07-30)
support for curl versions older than 7.11.1 was removed, and we
currently require at least version 7.19.4, see 644de29e220 (http: drop
support for curl < 7.19.4, 2021-07-30).
In those changes this Makefile-specific check added in
0890098780f (Decide whether to build http-push in the Makefile,
2005-11-18) was missed, now that we're never going to use such an
ancient curl version we don't need to check that we have at least
7.9.8 here. I have no idea what in http-push.c broke on versions older
than that.
This does not impact "NO_CURL" setups, as this is in the "else" branch
after that check.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script was added in f28ac70f48 (Move all dashed-form commands to
libexecdir, 2007-11-28) when commands such as "git-add" lived in the
bin directory, instead of the git exec directory.
This notice helped someone incorrectly installing version v1.6.0 and
later into a directory built for a pre-v1.6.0 git version.
We're now long past the point where anyone who'd be helped by this
warning is likely to be doing that, so let's just remove this check
and warning to simplify the Makefile.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add $(INSTALL_STRIP), which allows passing stripping options to
$(INSTALL).
For this to work, installing executables must be split to installing
compiled binaries and scripts portions, since $(INSTALL_STRIP) is only
meaningful to the former.
Users can set this variable depending on their system. For example,
Linux users can use `-s --strip-program=strip`, while FreeBSD users can
simply set to `-s` and choose strip program with $STRIPBIN.
[original outline by Đoàn Trần Công Danh]
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build fix.
* sg/make-fix-ar-invocation:
Makefile: remove archives before manipulating them with 'ar'
|
|
With the codebase firmly C99 compatible and most compilers supporting
newer versions by default, it could help bring visibility to problems.
Reverse the DEVOPTS=pedantic flag to provide a fallback for people stuck
with gcc < 5 or some other compiler that either doesn't support this flag
or has issues with it, and while at it also enable -Wpedantic which used
to be controversial[1] when Apple compilers and clang had widely divergent
version numbers.
Ideally any compiler found to have issues with these flags will be added
to an exception, and indeed, one was added to safely process windows
headers that would use non standard print identifiers, but it is expected
that more will be needed, so it could be considered a weather balloon.
[1] https://lore.kernel.org/git/20181127100557.53891-1-carenas@gmail.com/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the USE_PARENS_AROUND_GETTEXT_N compile-time option which was
meant to catch an inadvertent mistake which is too obscure to
maintain this facility.
The backstory of how USE_PARENS_AROUND_GETTEXT_N came about is: When I
added the N_() macro in 65784830366 (i18n: add no-op _() and N_()
wrappers, 2011-02-22) it was defined as:
#define N_(msgid) (msgid)
This is non-standard C, as was noticed and fixed in 642f85faab2 (i18n:
avoid parenthesized string as array initializer, 2011-04-07).
I.e. this needed to be defined as:
#define N_(msgid) msgid
Then in e62cd35a3e8 (i18n: log: mark parseopt strings for translation,
2012-08-20) when "builtin_log_usage" was marked for translation the
string concatenation for passing to usage() added in 1c370ea4e51
(Show usage string for 'git log -h', 'git show -h' and 'git diff -h',
2009-08-06) was faithfully preserved:
- "git log [<options>] [<since>..<until>] [[--] <path>...]\n"
- " or: git show [options] <object>...",
+ N_("git log [<options>] [<since>..<until>] [[--] <path>...]\n")
+ N_(" or: git show [options] <object>..."),
This was then fixed to be the expected array of usage strings in
e66dc0cc4b1 (log.c: fix translation markings, 2015-01-06) rather than
a string with multiple "\n"-delimited usage strings, and finally in
290c8e7a3fe (gettext.h: add parentheses around N_ expansion if
supported, 2015-01-11) USE_PARENS_AROUND_GETTEXT_N was added to ensure
this mistake didn't happen again.
I think that even if this was a N_()-specific issue this
USE_PARENS_AROUND_GETTEXT_N facility wouldn't be worth it, the issue
would be too rare to worry about.
But I also think that 290c8e7a3fe which introduced
USE_PARENS_AROUND_GETTEXT_N misattributed the problem. The issue
wasn't with the N_() macro added in e62cd35a3e8, but that before the
N_() macro existed in the codebase the initial migration to
parse_options() in 1c370ea4e51 continued passsing in a "\n"-delimited
string, when the new API it was migrating to supported and expected
the passing of an array.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
|
|
Pathname expansion (like "~username/") learned a way to specify a
location relative to Git installation (e.g. its $sharedir which is
$(prefix)/share), with "%(prefix)".
* js/expand-runtime-prefix:
expand_user_path: allow in-flight topics to keep using the old name
interpolate_path(): allow specifying paths relative to the runtime prefix
Use a better name for the function interpolating paths
expand_user_path(): clarify the role of the `real_home` parameter
expand_user_path(): remove stale part of the comment
tests: exercise the RUNTIME_PREFIX feature
|
|
The rules creating the $(LIB_FILE) and $(XDIFF_LIB) archives used to
be:
$(QUIET_AR)$(RM) $@ && $(AR) $(ARFLAGS) $@ $^
until commit 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) removed the '$(RM) $@' part, claiming that "we can
rely on the "c" (create) being present in ARFLAGS", and (I presume)
assuming that it means that the named archive is created from scratch.
Unfortunately, that's not what the 'c' flag does, it merely "Suppress
the diagnostic message that is written to standard error by default
when the archive is created" [1]. Consequently, all object files that
are already present in an existing archive and are not replaced will
remain there. This leads to linker errors in back-to-back builds of
different revisions without a 'make clean' between them if source
files going into these archives are renamed in between:
# The last commit renaming files that go into 'libgit.a':
# bc62692757 (hash-lookup: rename from sha1-lookup, 2020-12-31)
# sha1-lookup.c => hash-lookup.c | 14 +++++++-------
# sha1-lookup.h => hash-lookup.h | 12 ++++++------
$ git checkout bc62692757^
HEAD is now at 7a7d992d0d sha1-lookup: rename `sha1_pos()` as `hash_pos()`
$ make
[...]
$ git checkout 7b76d6bf22
HEAD is now at 7b76d6bf22 Makefile: add and use the ".DELETE_ON_ERROR" flag
$ make
[...]
AR libgit.a
LINK git
/usr/bin/ld: libgit.a(hash-lookup.o): in function `bsearch_hash':
/home/szeder/src/git/hash-lookup.c:105: multiple definition of `bsearch_hash'; libgit.a(sha1-lookup.o):/home/szeder/src/git/sha1-lookup.c:105: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:2213: git] Error 1
Restore the original make rules to first remove $(LIB_FILE) and
$(XDIFF_LIB) and then create them from scratch to avoid these build
errors.
[1] Quoting POSIX at:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ar.html
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the "tags", "TAGS" and "cscope.out" targets rely on piping into
xargs with an "echo <list> | xargs" pattern, we need to make sure
we're in an append mode.
Unlike my recent change to make use of ".DELETE_ON_ERROR" in
7b76d6bf221 (Makefile: add and use the ".DELETE_ON_ERROR" flag,
2021-06-29), we really do need the "rm $@+" at the beginning (note,
not "rm $@").
This is because the xargs command may decide to invoke the program
multiple times. We need to make sure we've got a union of its results
at the end.
For "ctags" and "etags" we used the "-a" flag for this, for cscope
that behavior is the default. Its "-u" flag disables its equivalent of
an implicit "-a" flag.
Let's also consistently use the $@ and $@+ names instead of needlessly
hardcoding or referring to more verbose names in the "tags" and "TAGS"
rules.
These targets could perhaps be improved in the future by factoring
this "echo <list> | xargs" pattern so that we make intermediate tags
files for each source file, and then assemble them into one "tags"
file at the end.
The etags manual page suggests that doing that (or perhaps just
--update) might be counter-productive, in any case, the tag building
is fast enough for me, so I'm leaving that for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before we generate a "cscope.out" file, remove that file explicitly,
and not everything matching "cscope*". This doesn't change any
behavior of the Makefile in practice, but makes this rule less
confusing, and consistent with other similar rules.
The cscope target was added in a2a9150bf06 (makefile: Add a cscope
target, 2007-10-06). It has always referred to cscope* instead of to
cscope.out in .gitignore and the "clean" target, even though we only
ever generated a cscope.out file.
This was seemingly done to aid use-cases where someone invoked cscope
with the "-q" flag, which would make it create a "cscope.in.out" and
"cscope.po.out" files in addition to "cscope.out".
But us removing those files we never generated is confusing, so let's
only remove the file we need to, furthermore let's use the "-f" flag
to explicitly name the cscope.out file, even though it's the default
if not "-f" argument is supplied.
It is somewhat inconsistent to change from the glob here but not in
the "clean" rule and .gitignore, an earlier version of this change
updated those as well, but see [1][2] for why they were kept.
1. https://lore.kernel.org/git/87k0lit57x.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87im0kn983.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability test update.
* ab/getcwd-test:
t0001: fix broken not-quite getcwd(3) test in bed67874e2
|
|
With a54e938e5b (strbuf: support long paths w/o read rights in
strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems
like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc
et al) behavior.
This was partially fixed in bed67874e2 (t0001: skip test with
restrictive permissions if getpwd(3) respects them, 2017-08-07).
The problem with that fix is that while its analysis of the problem is
correct, it doesn't actually call getcwd(3), instead it invokes "pwd
-P". There is no guarantee that "pwd -P" is going to call getcwd(3),
as opposed to e.g. being a shell built-in.
On AIX under both bash and ksh this test breaks because "pwd -P" will
happily display the current working directory, but getcwd(3) called by
the "git init" we're testing here will fail to get it.
I checked whether clobbering the $PWD environment variable would
affect it, and it didn't. Presumably these shells keep track of their
working directory internally.
There's possible follow-up work here in teaching strbuf_getcwd() to
get the working directory with whatever method "pwd" uses on these
platforms. See [1] for a discussion of that, but let's take the easy
way out here and just skip these tests by fixing the
GETCWD_IGNORES_PERMS prerequisite to match the limitations of
strbuf_getcwd().
1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optimization for repositories with many alternate object store.
* ew/many-alternate-optim:
oidtree: a crit-bit tree for odb_loose_cache
oidcpy_with_padding: constify `src' arg
make object_directory.loose_objects_subdir_seen a bitmap
avoid strlen via strbuf_addstr in link_alt_odb_entry
speed up alt_odb_usable() with many alternates
|
|
Originally, we refrained from adding a regression test in 7b6c6496374
(system_path(): Add prefix computation at runtime if RUNTIME_PREFIX set,
2008-08-10), and in 226c0ddd0d6 (exec_cmd: RUNTIME_PREFIX on some POSIX
systems, 2018-04-10).
The reason was that it was deemed too tricky to test.
Turns out that it is not tricky to test at all: we simply create a
pseudo-root, copy the `git` executable into the `git/` subdirectory of
that pseudo-root, then copy a script into the `libexec/git-core/`
directory and expect that to be picked up.
As long as the trash directory is in a location where binaries can be
executed, this works.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To pave the way for non-Windows platforms to define
trace2_collect_process_info(), reorganize the stub-or-definition schema
to something which doesn't directly reference Windows.
Platforms which want to collect parent process information in the
future should:
1. Add an implementation to compat/ (e.g. compat/somearch/procinfo.c)
2. Add that object to COMPAT_OBJS to config.mak.uname
(e.g. COMPAT_OBJS += compat/somearch/procinfo.o)
3. Define HAVE_PLATFORM_PROCINFO in config.mak.uname
In the Windows case, this definition lives in
compat/win32/trace2_win32_process_info.c, which is already conditionally
added to COMPAT_OBJS; so let's add HAVE_PLATFORM_PROCINFO to hint to the
build that compat/stub/procinfo.c should not be used.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GitHub Actions / CI update.
* js/ci-windows-update:
ci: accelerate the checkout
ci (vs-build): build with NO_GETTEXT
artifacts-tar: respect NO_GETTEXT
ci (windows): transfer also the Git-tracked files to the test jobs
ci: upgrade to using actions/{up,down}load-artifacts v2
ci (vs-build): use `cmd` to copy the DLLs, not `powershell`
ci: use the new GitHub Action to download git-sdk-64-minimal
|
|
Remove the "FORCE" dependency from the "tags", "TAGS" and "cscope"
targets, instead make them depend on whether or not the relevant
source files have changed.
For the cscope target we need to change it to depend on the actual
generated file while we generate while we're at it, as the next commit
will discuss we always generate a cscope.out file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare the internals for lazily fetching objects in submodules
from their promisor remotes.
* jt/partial-clone-submodule-1:
promisor-remote: teach lazy-fetch in any repo
run-command: refactor subprocess env preparation
submodule: refrain from filtering GIT_CONFIG_COUNT
promisor-remote: support per-repository config
repository: move global r_f_p_c to repo struct
|
|
Use ".DELETE_ON_ERROR" pseudo target to simplify our Makefile.
* ab/make-delete-on-error:
Makefile: add and use the ".DELETE_ON_ERROR" flag
|
|
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
|
|
This saves 8K per `struct object_directory', meaning it saves
around 800MB in my case involving 100K alternates (half or more
of those alternates are unlikely to hold loose objects).
This is implemented in two parts: a generic, allocation-free
`cbtree' and the `oidtree' wrapper on top of it. The latter
provides allocation using alloc_state as a memory pool to
improve locality and reduce free(3) overhead.
Unlike oid-array, the crit-bit tree does not require sorting.
Performance is bound by the key length, for oidtree that is
fixed at sizeof(struct object_id). There's no need to have
256 oidtrees to mitigate the O(n log n) overhead like we did
with oid-array.
Being a prefix trie, it is natively suited for expanding short
object IDs via prefix-limited iteration in
`find_short_object_filename'.
On my busy workstation, p4205 performance seems to be roughly
unchanged (+/-8%). Startup with 100K total alternates with no
loose objects seems around 10-20% faster on a hot cache.
(800MB in memory savings means more memory for the kernel FS
cache).
The generic cbtree implementation does impose some extra
overhead for oidtree in that it uses memcmp(3) on
"struct object_id" so it wastes cycles comparing 12 extra bytes
on SHA-1 repositories. I've not yet explored reducing this
overhead, but I expect there are many places in our code base
where we'd want to investigate this.
More information on crit-bit trees: https://cr.yp.to/critbit.html
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We obviously do not want to bundle `.mo` files during `make
artifacts-tar NO_GETTEXT=Yep`, but that was the case.
To fix that, go a step beyond just fixing the symptom, and simply
define the lists of `.po` and `.mo` files as empty if `NO_GETTEXT` is
set.
Helped-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't show the very verbose $(FIND_SOURCE_FILES) command on every
"make cscope" invocation.
See my recent 3c80fcb591 (Makefile: add QUIET_GEN to "tags" and "TAGS"
targets, 2021-03-28) for the same fix for the other adjacent targets.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the ".PHONY: cscope" rule to live alongside the "cscope" target
itself, not to be all the way near the bottom where we define the
"FORCE" rule.
That line was last modified in 2f76919517e (MinGW: avoid collisions
between "tags" and "TAGS", 2010-09-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the GNU make ".DELETE_ON_ERROR" flag in our main Makefile, as we
already do in the Documentation/Makefile since db10fc6c09f (doc:
simplify Makefile using .DELETE_ON_ERROR, 2021-05-21).
Now if a command to make X fails X will be removed, the default
behavior of GNU make is to only do so if "make" itself is interrupted
with a signal.
E.g. if we now intentionally break one of the rules with:
- mv $@+ $@
+ mv $@+ $@ && \
+ false
We'll get output like:
$ make git
CC git.o
LINK git
make: *** [Makefile:2179: git] Error 1
make: *** Deleting file 'git'
$ file git
git: cannot open `git' (No such file or directory)
Before this change we'd leave the file in place in under this
scenario.
As in db10fc6c09f this allows us to remove patterns of removing
leftover $@ files at the start of rules, since previous failing runs
of the Makefile won't have left those littered around anymore.
I'm not as confident that we should be replacing the "mv $@+ $@"
pattern entirely, since that means that external programs or one of
our other Makefiles might race and get partial content.
I'm not changing $(REMOTE_CURL_ALIASES) since that uses a ln/ln -s/cp
dance, and would require the addition of "-f" flags if the "rm" at the
start was removed. I've also got plans to fix that ln/ln -s/cp pattern
in another series.
For $(LIB_FILE) and $(XDIFF_LIB) we can rely on the "c" (create) being
present in ARFLAGS.
I'm not changing "$(ETAGS_TARGET)", "tags" and "cscope" because
they've got a messy combination of removing "$@+" not "$@" at the
beginning, or "$@*". I'm also addressing those in another series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one step towards supporting partial clone submodules.
Even after this patch, we will still lack partial clone submodules
support, primarily because a lot of Git code that accesses submodule
objects does so by adding their object stores as alternates, meaning
that any lazy fetches that would occur in the submodule would be done
based on the config of the superproject, not of the submodule. This also
prevents testing of the functionality in this patch by user-facing
commands. So for now, test this mechanism using a test helper.
Besides that, there is some code that uses the wrapper functions
like has_promisor_remote(). Those will need to be checked to see if they
could support the non-wrapper functions instead (and thus support any
repository, not just the_repository).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some test-cases, UTF-8 locale is required. To find such locale,
we're using the first available UTF-8 locale that returned by
"locale -a".
However, the locale(1) utility is unavailable on some systems,
e.g. Linux with musl libc.
However, without "locale -a", we can't guess provided UTF-8 locale.
Add a Makefile knob GIT_TEST_UTF8_LOCALE and activate it for
linux-musl in our CI system.
Rename t/lib-git-svn.sh:prepare_a_utf8_locale to prepare_utf8_locale,
since we no longer prepare the variable named "a_utf8_locale",
but set up a fallback value for GIT_TEST_UTF8_LOCALE instead.
The fallback will be LC_ALL, LANG environment variable,
or the first UTF-8 locale from output of "locale -a", in that order.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "simple-ipc" did not compile without pthreads support, but the
build procedure was not properly account for it.
* jh/simple-ipc-sans-pthread:
simple-ipc: correct ifdefs when NO_PTHREADS is defined
|
|
Simple IPC always requires threads (in addition to various
platform-specific IPC support). Fix the ifdefs in the Makefile
to define SUPPORTS_SIMPLE_IPC when appropriate.
Previously, the Unix version of the code would only verify that
Unix domain sockets were available.
This problem was reported here:
https://lore.kernel.org/git/YKN5lXs4AoK%2FJFTO@coredump.intra.peff.net/T/#m08be8f1942ea8a2c36cfee0e51cdf06489fdeafc
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build procedure clean-up.
* ab/perl-makefile-cleanup:
Makefile: make PERL_DEFINES recursively expanded
perl: use mock i18n functions under NO_GETTEXT=Y
Makefile: regenerate *.pm on NO_PERL_CPAN_FALLBACKS change
Makefile: regenerate perl/build/* if GIT-PERL-DEFINES changes
Makefile: don't re-define PERL_DEFINES
|
|
Over-the-wire protocol learns a new request type to ask for object
sizes given a list of object names.
* ba/object-info:
object-info: support for retrieving object info
|
|
Since 07d90eadb50 (Makefile: add Perl runtime prefix support,
2018-04-10) PERL_DEFINES has been a simply-expanded variable, let's
make it recursively expanded instead.
This change doesn't matter for the correctness of the logic. Whether
we used simply-expanded or recursively expanded didn't change what we
wrote out in GIT-PERL-DEFINES, but being consistent with other rules
makes this easier to understand.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the logic of the i18n functions I added in 5e9637c6297 (i18n:
add infrastructure for translating Git with gettext, 2011-11-18) to
use pass-through functions when NO_GETTEXT is defined.
This speeds up the compilation time of commands that use this library
when NO_GETTEXT=Y is in effect. Loading it and POSIX.pm is around 20ms
on my machine, whereas it takes 2ms to just instantiate perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regenerate the *.pm files in perl/build/* if the
NO_PERL_CPAN_FALLBACKS flag added to the *.pm files in
1aca69c0195 (perl Git::LoadCPAN: emit better errors under
NO_PERL_CPAN_FALLBACKS, 2018-03-03) is changed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the logic to generate perl/build/* to regenerate those files if
GIT-PERL-DEFINES changes. This ensures that e.g. changing localedir
will result in correctly re-generated files.
I don't think that ever worked. The brokenness pre-dates my
20d2a30f8ff (Makefile: replace perl/Makefile.PL with simple make
rules, 2017-12-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 07d90eadb50 (Makefile: add Perl runtime prefix support,
2018-04-10) we have been declaring PERL_DEFINES right after assigning
to it, with the effect that the first PERL_DEFINES was ignored.
That bug didn't matter in practice since the first line had all the
same variables as the second, so we'd correctly re-generate
everything. It just made for confusing reading.
Let's remove that first assignment, and while we're at it split these
across lines to make them more maintainable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Bagas Sanjaya
Carlo Marcelo Arenas Belón
SZEDER Gábor
Johannes Schindelin
Emily Shaffer
Eric Wong
Jonathan Tan
Đoàn Trần Công Danh
Jeff Hostetler