Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The dependency was missing.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It appears parallel build (-j) gets confused.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
|
|
GNU/Hurd systems don't have strlcpy.
Signed-off-by: Thomas Schwinge <tschwinge@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch adds convenience functions to work with absolute paths.
The function is_absolute_path() should help the efforts to integrate
the MinGW fork.
Note that make_absolute_path() returns a pointer to a static buffer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce new makefile variable lib to hold the name of the lib
directory ("lib" by default). Also introduce a switch for configure
to specify this name with --with-lib=ARG. This is useful for systems
that use a different name than "lib" (like "lib64" on some 64 bit
Linux architectures).
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some systems do not provide zlib development headers and libraries in
default search path of the compiler. For these systems we should allow
specifying the location by --with-zlib=PATH or by setting ZLIB_PATH in
the makefile.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some people might prefer to be able to specify the find utility to
use.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 334d28ae factored out git.o as an intermediate stage between
git.c and git$X. However:
- It left some no-longer-relevant flags in the rule for git$X.
- It failed to replace git$X with git.o in the list of files that
record GIT_VERSION. This broke incorporation of a changed
GIT_VERSION into git$X because, when GIT_VERSION changes, git.o isn't
remade and git$X is relinked from the git.o that still contains the
old GIT_VERSION.
This patch removes the irrelevant flags and fixes incorporation of a
changed GIT_VERSION into git$X.
Signed-off-by: Matt McCutchen <hashproduct@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I realize that a lot of people use the "git-xyzzy" format, and we have
various historical reasons for it, but I also think that most people have
long since started thinking of the git command as a single command with
various subcommands, and we've long had the documentation talk about it
that way.
Slowly migrating away from the git-xyzzy format would allow us to
eventually no longer install hundreds of binaries (even if most of them
are symlinks or hardlinks) in users $PATH, and the _original_ reasons for
it (implementation issues and bash completion) are really long long gone.
Using "git xyzzy" also has some fundamental advantages, like the ability
to specify things like paging ("git -p xyzzy") and making the whole notion
of aliases act like other git commands (which they already do, but they do
*not* have a "git-xyzzy" form!)
Anyway, while actually removing the "git-xyzzy" things is not practical
right now, we can certainly start slowly to deprecate it internally inside
git itself - in the shell scripts we use, and the test vectors.
This patch adds a "remove-dashes" makefile target, which does that. It
isn't particularly efficient or smart, but it *does* successfully rewrite
a lot of our shell scripts to use the "git xyzzy" form for all built-in
commands.
(For non-builtins, the "git xyzzy" format implies an extra execve(), so
this script leaves those alone).
So apply this patch, and then run
make remove-dashes
make test
git commit -a
to generate a much larger patch that actually starts this transformation.
(The only half-way subtle thing about this is that it also fixes up
git-filter-branch.sh for the new world order by adding quoting around
the use of "git-commit-tree" as an argument. It doesn't need it in that
format, but when changed into "git commit-tree" it is no longer a single
word, and the quoting maintains the old behaviour).
NOTE! This does not yet mean that you can actually stop installing the
"git-xyzzy" binaries for the builtins. There are some remaining places
that want to use the old form, this just removes the most obvious ones
that can easily be done automatically.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ns/stash:
Documentation: quote {non-attributes} for asciidoc
git-stash: don't complain when listing in a repo with no stash
git-stash: fix "can't shift that many" with no arguments
git-stash: fix "no arguments" case in documentation
git-stash: require "save" to be explicit and update documentation
Document git-stash
Add git-stash script
|
|
* js/rebase:
Teach rebase -i about --preserve-merges
rebase -i: provide reasonable reflog for the rebased branch
rebase -i: several cleanups
ignore git-rebase--interactive
Teach rebase an interactive mode
Move the pick_author code to git-sh-setup
|
|
When my boss has something to show me and I have to update, for some
reason I am always in the middle of doing something else, and git pull
command refuses to work in such a case.
I wrote this little script to save the changes I made, perform the
update, and then come back to where I was, but on top of the updated
commit.
This is how you would use the script:
$ git stash
$ git pull
$ git stash apply
[jc: with a few fixlets from the list]
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Correct the name of NO_R_TO_GCC_LINKER in the comment describing it.
git-remote: document -n
repack: improve documentation on -a option
|
|
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/filter:
filter-branch: subdirectory filter needs --full-history
filter-branch: Simplify parent computation.
Teach filter-branch about subdirectory filtering
filter-branch: also don't fail in map() if a commit cannot be mapped
filter-branch: Use rev-list arguments to specify revision ranges.
filter-branch: fix behaviour of '-k'
filter-branch: use $(($i+1)) instead of $((i+1))
chmod +x git-filter-branch.sh
filter-branch: prevent filters from reading from stdin
t7003: make test repeatable
Add git-filter-branch
|
|
|
|
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All the other directory location variables do not have the trailing
slash.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent git-gui has the ability to determine the location of its library
files relative to the --exec-dir. Its Makefile enables this capability
depending on the install paths that are specified. However, without this
fix there is an extra slash in a path specification, so that the Makefile
does not recognize the equivalence of two paths that it compares.
A side-effect is that all "standard" builds (which do not set $(sharedir)
explicitly) now exploit above mentioned gut-gui feature.
Another side-effect is that an ugly compiled-in double-slash in
$(template_dir) is avoided.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the kernel we have a rule for *.c -> *.s files exactly because
it's nice to be able to easily say "ok, what does that generate".
Here's a patch to add such a rule to git too, in case anybody is
interested. It makes it much simpler to just do
make sha1_file.s
and look at the compiler-generated output that way, rather than having to
fire up gdb on the resulting binary.
(Add -fverbose-asm or something if you want to, it can make the result
even more readable)
[jc: add *.s to .gitignore]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-merge-base is a builtin.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This script is derived from Pasky's cg-admin-rewritehist.
In fact, it _is_ the same script, minimally adapted to work without cogito.
It _should_ be able to perform the same tasks, even if only relying on
core-git programs.
All the work is Pasky's, just the adaption is mine.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Hopefully-signed-off-by: Petr "cogito master" Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lh/submodules:
Add basic test-script for git-submodule
Add git-submodule command
* pb/am:
Remove git-applypatch
git-applymbox: Remove command
|
|
Use a generic make rule to build all the test programs, rather than
specifically mentioning each one.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* db/remote:
Move refspec pattern matching to match_refs().
Update local tracking refs when pushing
Add handlers for fetch-side configuration of remotes.
Move refspec parser from connect.c and cache.h to remote.{c,h}
Move remote parsing into a library file out of builtin-push.
|
|
Those are builtins. Remove them from PROGRAMS variable
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This command can be used to initialize, update and inspect submodules. It
uses a .gitmodules file, readable by git-config, in the top level directory
of the 'superproject' to specify a mapping between submodule paths and
repository url.
Example .gitmodules layout:
[module "git"]
url = git://git.kernel.org/pub/scm/git/git.git
With this entry in .gitmodules (and a commit reference in the index entry for
the path "git"), the command 'git submodule init' will clone the repository
at kernel.org into the directory "git".
Known issues
============
There is currently no way to override the url found in the .gitmodules file,
except by manually creating the subproject repository. The place to fix this
in the script has a rather long comment about a possible plan.
Funny paths will be quoted in the output from git-ls-files, but git-submodule
does not attempt to unquote (or even detect the presence of) such paths.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The previous one removed git-applymbox, which was the sole user
of this tool.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I believe noone uses git-applymbox, and noone definitely should, since it
is supposed to be completely superseded and everything by its younger
cousin git-am. The only known person in the universe to use it was Linus
and he declared some time ago that he will try to use git-am instead in his
famous dotest script.
The trouble is that git-applymbox existence creates confusing UI. I'm a bit
like a recycled newbie to the git porcelain and *I* was confused by
git-applymbox primitiveness until I've realized a while later that I'm of
course using the wrong command.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new parser is different from the one in builtin-push in two ways:
the default is to use the current branch's remote, if there is one,
before "origin"; and config is used in preference to remotes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We already export these variables earlier in the Makefile, right
after they were 'declared'. There is no point in doing so again.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* 'master' of git://repo.or.cz/git-gui:
git-gui: Use vi-like keys in merge dialog
git-gui: Include commit id/subject in merge choices
git-gui: Show all possible branches for merge
git-gui: Move merge support into a namespace
git-gui: Allow vi keys to scroll the diff/blame regions
git-gui: Move console procs into their own namespace
git-gui: Refactor into multiple files to save my sanity
git-gui: Track our own embedded values and rebuild when they change
git-gui: Refactor to use our git proc more often
git-gui: Use option database defaults to set the font
git-gui: Cleanup common font handling for font_ui
git-gui: Correct line wrapping for too many branch message
git-gui: Warn users before making an octopus merge
git-gui: Include the subject in the status bar after commit
Also perform an evil merge change to update Git's main Makefile to
pass the proper options down into git-gui now that it depends on
reasonable values for 'sharedir' and 'TCL_PATH'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I'm finding it difficult to work with a 6,000+ line Tcl script
and not go insane while looking for a particular block of code.
Since most of the program is organized into different units of
functionality and not all users will need all units immediately
on startup we can improve things by splitting procs out into
multiple files and let auto_load handle things for us.
This should help not only to better organize the source, but
it may also improve startup times for some users as the Tcl
parser does not need to read as much script before it can show
the UI. In many cases the user can avoid reading at least half
of git-gui now.
Unfortunately we now need a library directory in our runtime
location. This is currently assumed to be $(sharedir)/git-gui/lib
and its expected that the Makefile invoker will setup some sort of
reasonable sharedir value for us, or let us assume its going to be
$(gitexecdir)/../share.
We now also require a tclsh (in TCL_PATH) to just run the Makefile,
as we use tclsh to generate the tclIndex for our lib directory. I'm
hoping this is not an unncessary burden on end-users who are building
from source.
I haven't really made any functionality changes here, this is just a
huge migration of code from one file to many smaller files. All of
the new changes are to setup the library path and install the library
files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|