| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For some reason, I need ALL_LDFLAGS in the git target only on
AIX. Once it builds, only one test "fails" on AIX 5.1 with
1.3.0.rc1, t5500-fetch-pack.sh, but it looks like it's some
odd tool problem in the tester + my setup and not a real bug.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lt/diffgen:
add clean and ignore rules for xdiff/
Remove dependency on a file named "-lz"
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
By changing the dependency "$(LIB_H)" to "$(LIBS)", at least one version
of make thought that a file named "-lz" would be needed.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lt/diffgen:
built-in diff: minimum tweaks
builtin-diff: \No newline at end of file.
Use a *real* built-in diff generator
|
|
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* master:
Makefile: Add TAGS and tags targets
ls-files: Don't require exclude files to end with a newline.
|
|
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fk/blame:
blame: Rename detection (take 2)
rev-lib: Make it easy to do rename tracking (take 2)
Make it possible to not clobber object.util in sort_in_topological_order (take 2)
Add git-imap-send, derived from isync 1.0.1.
repack: prune loose objects when -d is given
try_to_simplify_commit(): do not skip inspecting tree change at boundary.
Fix t1200 test for breakage caused by removal of full-stop at the end of fast-forward message.
Describe how to add extra mail header lines in mail generated by git-format-patch.
Document the --attach flag.
allow double click on current HEAD id after git-pull
|
|
git-imap-send drops a patch series generated by git-format-patch into an
IMAP folder. This allows patch submitters to send patches through their
own mail program.
git-imap-send uses the following values from the GIT repository
configuration:
The target IMAP folder:
[imap]
Folder = "INBOX.Drafts"
A command to open an ssh tunnel to the imap mail server.
[imap]
Tunnel = "ssh -q user@imap.server.com /usr/bin/imapd ./Maildir
2> /dev/null"
[imap]
Host = imap.server.com
User = bob
Password = pwd
Port = 143
|
|
* jc/fsck:
fsck-objects: Remove --standalone
refs.c::do_for_each_ref(): Finish error message lines with "\n"
Nicer output from 'git'
Use #define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
Remove trailing dot after short description
Fix some inconsistencies in the docs
contrib/git-svn: fix a harmless warning on rebuild (with old repos)
contrib/git-svn: remove the --no-stop-on-copy flag
contrib/git-svn: fix svn compat and fetch args
Don't recurse into parents marked uninteresting.
diff-delta: bound hash list length to avoid O(m*n) behavior
test-delta needs zlib to compile
git-fmt-merge-msg cleanup
|
|
[jc: with suggestions by Jan-Benedict Glaw]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* master:
repo-config: give value_ a sane default so regexec won't segfault
Update http-push functionality
cvsimport: Remove master-updating code
|
|
This brings http-push functionality more in line with the ssh/git version,
by borrowing bits from send-pack and rev-list to process refspecs and
revision history in more standard ways. Also, the status of remote objects
is determined using PROPFIND requests for the object directory rather than
HEAD requests for each object - while it may be less efficient for small
numbers of objects, this approach is able to get the status of all remote
loose objects in a maximum of 256 requests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... as suggested on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The default output mode is slightly different from git-annotate's.
However, git-annotate's output mode can be obtained by using the
'-c' flag.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a companion patch to e29e1147e485654d90a0ea0fd5fb7151bb194265
which made diffcore similarity estimator independent from the packfile
deltifier. There is no reason for us to be counting the xdelta anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fk/blame:
git-blame, take 2
Merge part of 'lt/rev-list' into 'fk/blame'
Add git-blame, a tool for assigning blame.
|
|
* lt/rev-list:
setup_revisions(): handle -n<n> and -<n> internally.
git-log (internal): more options.
git-log (internal): add approxidate.
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
Splitting rev-list into revisions lib, end of beginning.
rev-list split: minimum fixup.
First cut at libifying revlist generation
|
|
Now blame will depend on the new revision walker infrastructure,
we need to make it depend on earlier parts of Linus' rev-list
topic branch, hence this merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is to rework diffcore break/rename/copy detection code
so that it does not affected when deltifier code gets improved.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is what the previous diffs all built up to.
We can do "git log" as a trivial small helper function inside git.c,
because the infrastructure is all there for us to use as a library.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This introduces the new function
void setup_pager(void);
to set up output to be written through a pager applocation.
All in preparation for doing the simple scripts in C.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When on Darwin platforms don't include Fink or DarwinPorts
into the link path unless the related library directory
is actually present. The linker on MacOS 10.4 complains
if it is given a directory which does not exist.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This really just splits things up partially, and creates the
interface to set things up by parsing the command line.
No real code changes so far, although the parsing of filenames is a bit
stricter. In particular, if there is a "--", then we do not accept any
filenames before it, and if there isn't any "--", then we check that _all_
paths listed are valid, not just the first one.
The new argument parsing automatically also gives us "--default" and
"--not" handling as in git-rev-parse.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The merge 712b1dd389ad5bcdbaab0279641f0970702fc1f1 was done
incorrectly, and lost this program from Makefile.
Big thanks go to Tony Luck for noticing it, and Linus for
diagnosing it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* ml/cvs:
Introducing git-cvsserver -- a CVS emulator for git.
|
|
* ra/anno:
Use Ryan's git-annotate instead of jsannotate
Add git-annotate, a tool for assigning blame.
|
|
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-cvsserver is highly functional. However, not all methods are implemented,
and for those methods that are implemented, not all switches are implemented.
All the common read operations are implemented, and add/remove/commit are
supported.
Testing has been done using both the CLI CVS client, and the Eclipse CVS
plugin. Most functionality works fine with both of these clients.
Currently git-cvsserver only works over SSH connections, see the
Documentation for more details on how to configure your client. It
does not support pserver for anonymous access but it should not be
hard to implement. Anonymous access will need tighter input validation.
In our very informal tests, it seems to be significantly faster than a real
CVS server.
This utility depends on a version of git-cvsannotate that supports -S and on
DBD::SQLite.
Licensed under GPLv2. Copyright The Open University UK.
Authors: Martyn Smith <martyn@catalyst.net.nz>
Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/portable:
Fix "gmake -j"
Really honour NO_PYTHON
avoid makefile override warning
Fixes for ancient versions of GNU make
|
|
In my attempt to port git to IRIX, I broke it. Sorry.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- Solaris 9 and up do not need -liconv, so NEEDS_LIBICONV should be set
only for S8.
- Move the declaration of the uname variables to early in the Makefile
so they can be referenced by prefix and gitexecdir variables.
- gitexecdir defaults to being same as bindir, it might as well reference
that variable.
[jc: corrupt patch, sneakily tried to remove inclusion of GIT-VERSION-FILE
I do not know why I am applying this...]
Signed-off-by: Paul Jakma <paul@quagga.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I have also been working on a blame program. The algorithm is pretty
much the one described by Junio in his blame.perl. My variant doesn't
handle renames, but it shouldn't be too hard to add that. The output
is minimal, just the line number followed by the commit SHA1.
An interesting observation is that the output from my git-blame and
your git-annotate doesn't match on all files in the git
repository. One example where several lines differ is read-cache.c. I
haven't investigated it further to find out which one is correct.
The code should be considered as a work in progress. It certainly has
a couple of rough edges. The output looks fairly sane on the few files
I have tested it on, but it wouldn't be too surprising if it gets some
cases wrong.
[jc: adding it to pu for wider comments. I did minimum
whitespace fixups but it still needs an indent run and
-Wdeclaration-after-statement fixups.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
This reads data in the format a (non recursive) ls-tree outputs
and writes a tree object to the object database. The created
tree object name is output to the standard output.
For convenience, the input data does not need to be sorted; the
command sorts the input lines internally.
By request from Tommi Virtanen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lt/merge-tree:
git-merge-tree: generalize the "traverse <n> trees in sync" functionality
Handling large files with GIT
Handling large files with GIT
|
|
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Do not even test for subprocess (trying to execute python).
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some versions of diff do not correctly detect a missing new-line at the end
of the file under certain circumstances.
When defining NO_ACCURATE_DIFF, work around this bug.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Systems using some uClibc versions do not properly support
iconv stuff. This patch allows Git to be built on those
systems by passing NO_ICONV=YesPlease to make. The only
drawback is mailinfo won't do charset conversion in those
systems.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On Tue, 14 Feb 2006, Junio C Hamano wrote:
> Linus Torvalds <torvalds@osdl.org> writes:
>
> > If somebody is interested in making the "lots of filename changes" case go
> > fast, I'd be more than happy to walk them through what they'd need to
> > change. I'm just not horribly motivated to do it myself. Hint, hint.
>
> In case anybody is wondering, I share the same feeling. I
> cannot say I'd be "more than happy to" clean up potential
> breakages during the development of such changes, but if the
> change eventually would help certain use cases, I can be
> persuaded to help debugging such a mess ;-).
Actually, I got interested in seeing how hard this is, and wrote a simple
first cut at doing a tree-optimized merger.
Let me shout a bit first:
THIS IS WORKING CODE, BUT BE CAREFUL: IT'S A TECHNOLOGY DEMONSTRATION
RATHER THAN THE FINAL PRODUCT!
With that out of the way, let me descibe what this does (and then describe
the missing parts).
This is basically a three-way merge that works entirely on the "tree"
level, rather than on the index. A lot of the _concepts_ are the same,
though, and if you're familiar with the results of an index merge, some of
the output will make more sense.
You give it three trees: the base tree (tree 0), and the two branches to
be merged (tree 1 and tree 2 respectively). It will then walk these three
trees, and resolve them as it goes along.
The interesting part is:
- it can resolve whole sub-directories in one go, without actually even
looking recursively at them. A whole subdirectory will resolve the same
way as any individual files will (although that may need some
modification, see later).
- if it has a "content conflict", for subdirectories that means "try to
do a recursive tree merge", while for non-subdirectories it's just a
content conflict and we'll output the stage 1/2/3 information.
- a successful merge will output a single stage 0 ("merged") entry,
potentially for a whole subdirectory.
- it outputs all the resolve information on stdout, so something like the
recursive resolver can pretty easily parse it all.
Now, the caveats:
- we probably need to be more careful about subdirectory resolves. The
trivial case (both branches have the exact same subdirectory) is a
trivial resolve, but the other cases ("branch1 matches base, branch2 is
different" probably can't be silently just resolved to the "branch2"
subdirectory state, since it might involve renames into - or out of -
that subdirectory)
- we do not track the current index file at all, so this does not do the
"check that index matches branch1" logic that the three-way merge in
git-read-tree does. The theory is that we'd do a full three-way merge
(ignoring the index and working directory), and then to update the
working tree, we'd do a two-way "git-read-tree branch1->result"
- I didn't actually make it do all the trivial resolve cases that
git-read-tree does. It's a technology demonstration.
Finally (a more serious caveat):
- doing things through stdout may end up being so expensive that we'd
need to do something else. In particular, it's likely that I should
not actually output the "merge results", but instead output a "merge
results as they _differ_ from branch1"
However, I think this patch is already interesting enough that people who
are interested in merging trees might want to look at it. Please keep in
mind that tech _demo_ part, and in particular, keep in mind the final
"serious caveat" part.
In many ways, the really _interesting_ part of a merge is not the result,
but how it _changes_ the branch we're merging into. That's particularly
important as it should hopefully also mean that the output size for any
reasonable case is minimal (and tracks what we actually need to do to the
current state to create the final result).
The code very much is organized so that doing the result as a "diff
against branch1" should be quite easy/possible. I was actually going to do
it, but I decided that it probably makes the output harder to read. I
dunno.
Anyway, let's think about this kind of approach.. Note how the code itself
is actually quite small and short, although it's prbably pretty "dense".
As an interesting test-case, I'd suggest this merge in the kernel:
git-merge-tree $(git-merge-base 4cbf876 7d2babc) 4cbf876 7d2babc
which resolves beautifully (there are no actual file-level conflicts), and
you can look at the output of that command to start thinking about what
it does.
The interesting part (perhaps) is that timing that command for me shows
that it takes all of 0.004 seconds.. (the git-merge-base thing takes
considerably more ;)
The point is, we _can_ do the actual merge part really really quickly.
Linus
PS. Final note: when I say that it is "WORKING CODE", that is obviously by
my standards. IOW, I tested it once and it gave reasonable results - so it
must be perfect.
Whether it works for anybody else, or indeed for any other test-case, is
not my problem ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If Git is compiled with NO_CURL=YesPlease and one tries to
clone a http repository, git-clone tries to call the curl
binary. This trivial patch prints an error instead in such
situation.
Signed-off-by: Fernando J. Pereda <ferdy@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With the current Makefile we don't use the shell chosen by the
platform specific defines when we invoke GIT-VERSION-GEN.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Jason Riedy
Junio C Hamano
Johannes Schindelin
Linus Torvalds
Fredrik Kuivinen
Mike McCormack
Nicolas Pitre
Nick Hengeveld
Shawn Pearce
Carl Worth
Martin Langhoff
Paul Jakma
Ryan Anderson
Fernando J. Pereda