| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We used to disable threaded "git index-pack" on platforms without
thread-safe pread(); use a different workaround for such
platforms to allow threaded "git index-pack".
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
|
|
Postpone this a bit during the feature freeze and retry the effort
in the next cycle.
|
|
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
|
|
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
|
|
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Multi-threaing of index-pack was disabled with c0f8654
(index-pack: Disable threading on cygwin - 2012-06-26), because
pread() implementations for Cygwin and MSYS were not thread
safe. Recent Cygwin does offer usable pread() and we enabled
multi-threading with 103d530f (Cygwin 1.7 has thread-safe pread,
2013-07-19).
Work around this problem on platforms with a thread-unsafe
pread() emulation by opening one file handle per thread; it
would prevent parallel pread() on different file handles from
stepping on each other.
Also remove NO_THREAD_SAFE_PREAD that was introduced in c0f8654
because it's no longer used anywhere.
This workaround is unconditional, even for platforms with
thread-safe pread() because the overhead is small (a couple file
handles more) and not worth fragmenting the code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires more flags than can be guessed with the old-style
CURLDIR and related options, so is only supported when curl-config is
present.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
curl-config should always be installed alongside a curl distribution,
and its purpose is to provide flags for building against libcurl, so
use it instead of guessing flags and dependent libraries.
Allow overriding CURL_CONFIG to a custom path to curl-config, to
compile against a curl installation other than the first in PATH.
Depending on the set of features curl is compiled with, there may be
more libraries required than the previous two options of -lssl and
-lidn. For example, with a vanilla build of libcurl-7.36.0 on Mac OS X
10.9:
$ ~/d/curl-out-7.36.0/lib/curl-config --libs
-L/Users/dborowitz/d/curl-out-7.36.0/lib -lcurl -lgssapi_krb5 -lresolv -lldap -lz
Use this only when CURLDIR is not explicitly specified, to continue
supporting older builds.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
|
|
Finishing touches for portability.
* jk/commit-dates-parsing-fix:
t4212: loosen far-in-future test for AIX
date: recognize bogus FreeBSD gmtime output
|
|
Most gmtime implementations return a NULL value when they
encounter an error (and this behavior is specified by ANSI C
and POSIX). FreeBSD's implementation, however, will simply
leave the "struct tm" untouched. Let's also recognize this
and convert it to a NULL (with this patch, t4212 should pass
on FreeBSD).
Reported-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dp/makefile-charset-lib-doc:
Makefile: describe CHARSET_LIB better
|
|
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original explanation was not even grammatically correct or
readable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow v1.9.0 sorted before v1.10.0 in "git tag --list" output.
* nd/tag-version-sort:
tag: support --sort=<spec>
|
|
* tg/index-v4-format:
read-cache: add index.version config variable
test-lib: allow setting the index format version
introduce GIT_INDEX_VERSION environment variable
|
|
We started using wildmatch() in place of fnmatch(3); complete the
process and stop using fnmatch(3).
* nd/no-more-fnmatch:
actually remove compat fnmatch source code
stop using fnmatch (either native or compat)
Revert "test-wildmatch: add "perf" command to compare wildmatch and fnmatch"
use wildmatch() directly without fnmatch() wrapper
|
|
--sort=version:refname (or --sort=v:refname for short) sorts tags as
if they are versions. --sort=-refname reverses the order (with or
without ":version").
versioncmp() is copied from string/strverscmp.c in glibc commit
ee9247c38a8def24a59eb5cfb7196a98bef8cfdc, reformatted to Git coding
style. The implementation is under LGPL-2.1 and according to [1] I can
relicense it to GPLv2.
[1] http://www.gnu.org/licenses/gpl-faq.html#AllCompatibility
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
|
|
Improvements to our hash table to get it to meet the needs of the
msysgit fscache project, with some nice performance improvements.
* kb/fast-hashmap:
name-hash: retire unused index_name_exists()
hashmap.h: use 'unsigned int' for hash-codes everywhere
test-hashmap.c: drop unnecessary #includes
.gitignore: test-hashmap is a generated file
read-cache.c: fix memory leaks caused by removed cache entries
builtin/update-index.c: cleanup update_one
fix 'git update-index --verbose --again' output
remove old hash.[ch] implementation
name-hash.c: remove cache entries instead of marking them CE_UNHASHED
name-hash.c: use new hash map implementation for cache entries
name-hash.c: remove unreferenced directory entries
name-hash.c: use new hash map implementation for directories
diffcore-rename.c: use new hash map implementation
diffcore-rename.c: simplify finding exact renames
diffcore-rename.c: move code around to prepare for the next patch
buitin/describe.c: use new hash map implementation
add a hashtable implementation that supports O(1) removal
submodule: don't access the .gitmodules cache entry after removing it
|
|
Allow adding a TEST_GIT_INDEX_VERSION variable to config.mak to set the
index version with which the test suite should be run.
If it isn't set, the default version given in the source code is
used (currently version 3).
To avoid breakages with index versions other than [23], also set the
index version under which t2104 is run to 3. This test only tests
functionality specific to version 2 and 3 of the index file and would
fail if the test suite is run with any other version.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since v1.8.4 (about six months ago) wildmatch is used as default
replacement for fnmatch. We have seen only one fix since so wildmatch
probably has done a good job as fnmatch replacement. This concludes
the fnmatch->wildmatch transition by no longer relying on fnmatch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/revision-o-is-in-libgit-a:
Makefile: remove redundant object in git-http{fetch,push}
|
|
revision.o is included in libgit.a which is in $(GITLIBS), so we don't
need to include is separately. This fixes compilation with
"-fwhole-program" which otherwise fails with messages like this:
libgit.a(revision.o): In function `mark_tree_uninteresting':
/home/john/src/git/revision.c:108: multiple definition of `mark_tree_uninteresting'
/tmp/ccKQRkZV.ltrans2.ltrans.o:/home/john/src/git/revision.c:108: first defined here
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the git version number consists of less than three period
separated numbers, then the Windows resource file compilation
issues a syntax error:
$ touch git.rc
$ make V=1 git.res
GIT_VERSION = 1.9.rc0
windres -O coff \
-DMAJOR=1 -DMINOR=9 -DPATCH=rc0 \
-DGIT_VERSION="\\\"1.9.rc0\\\"" git.rc -o git.res
C:\msysgit\msysgit\mingw\bin\windres.exe: git.rc:2: syntax error
make: *** [git.res] Error 1
$
Note that -DPATCH=rc0.
The values passed via -DMAJOR=, -DMINOR=, and -DPATCH= are used in
FILEVERSION and PRODUCTVERSION statements, which expect up to four numeric
values. These version numbers are intended for machine consumption. They
are typically inspected by installers to decide whether a file to be
installed is newer than one that exists on the system, but are not used
for much else.
We can be pretty certain that there are no tools that look at these
version numbers, not even the installer of Git for Windows does.
Therefore, to fix the syntax error, fill in only the first two numbers,
which we are guaranteed to find in Git version numbers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A bitmap index is a `.bitmap` file that can be found inside
`$GIT_DIR/objects/pack/`, next to its corresponding packfile, and
contains precalculated reachability information for selected commits.
The full specification of the format for these bitmap indexes can be found
in `Documentation/technical/bitmap-format.txt`.
For a given commit SHA1, if it happens to be available in the bitmap
index, its bitmap will represent every single object that is reachable
from the commit itself. The nth bit in the bitmap is the nth object in
the packfile; if it's set to 1, the object is reachable.
By using the bitmaps available in the index, this commit implements
several new functions:
- `prepare_bitmap_git`
- `prepare_bitmap_walk`
- `traverse_bitmap_commit_list`
- `reuse_partial_packfile_from_bitmap`
The `prepare_bitmap_walk` function tries to build a bitmap of all the
objects that can be reached from the commit roots of a given `rev_info`
struct by using the following algorithm:
- If all the interesting commits for a revision walk are available in
the index, the resulting reachability bitmap is the bitwise OR of all
the individual bitmaps.
- When the full set of WANTs is not available in the index, we perform a
partial revision walk using the commits that don't have bitmaps as
roots, and limiting the revision walk as soon as we reach a commit that
has a corresponding bitmap. The earlier OR'ed bitmap with all the
indexed commits can now be completed as this walk progresses, so the end
result is the full reachability list.
- For revision walks with a HAVEs set (a set of commits that are deemed
uninteresting), first we perform the same method as for the WANTs, but
using our HAVEs as roots, in order to obtain a full reachability bitmap
of all the uninteresting commits. This bitmap then can be used to:
a) limit the subsequent walk when building the WANTs bitmap
b) finding the final set of interesting commits by performing an
AND-NOT of the WANTs and the HAVEs.
If `prepare_bitmap_walk` runs successfully, the resulting bitmap is
stored and the equivalent of a `traverse_commit_list` call can be
performed by using `traverse_bitmap_commit_list`; the bitmap version
of this call yields the objects straight from the packfile index
(without having to look them up or parse them) and hence is several
orders of magnitude faster.
As an extra optimization, when `prepare_bitmap_walk` succeeds, the
`reuse_partial_packfile_from_bitmap` call can be attempted: it will find
the amount of objects at the beginning of the on-disk packfile that can
be reused as-is, and return an offset into the packfile. The source
packfile can then be loaded and the bytes up to `offset` can be written
directly to the result without having to consider the entires inside the
packfile individually.
If the `prepare_bitmap_walk` call fails (e.g. because no bitmap files
are available), the `rev_info` struct is left untouched, and can be used
to perform a manual rev-walk using `traverse_commit_list`.
Hence, this new set of functions are a generic API that allows to
perform the equivalent of
git rev-list --objects [roots...] [^uninteresting...]
for any set of commits, even if they don't have specific bitmaps
generated for them.
In further patches, we'll use this bitmap traversal optimization to
speed up the `pack-objects` and `rev-list` commands.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
EWAH is a word-aligned compressed variant of a bitset (i.e. a data
structure that acts as a 0-indexed boolean array for many entries).
It uses a 64-bit run-length encoding (RLE) compression scheme,
trading some compression for better processing speed.
The goal of this word-aligned implementation is not to achieve
the best compression, but rather to improve query processing time.
As it stands right now, this EWAH implementation will always be more
efficient storage-wise than its uncompressed alternative.
EWAH arrays will be used as the on-disk format to store reachability
bitmaps for all objects in a repository while keeping reasonable sizes,
in the same way that JGit does.
This EWAH implementation is a mostly straightforward port of the
original `javaewah` library that JGit currently uses. The library is
self-contained and has been embedded whole (4 files) inside the `ewah`
folder to ease redistribution.
The library is re-licensed under the GPLv2 with the permission of Daniel
Lemire, the original author. The source code for the C version can
be found on GitHub:
https://github.com/vmg/libewok
The original Java implementation can also be found on GitHub:
https://github.com/lemire/javaewah
[jc: stripped debug-only code per Peff's $gmane/239768]
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/remove-deprecated:
stop installing git-tar-tree link
peek-remote: remove deprecated alias of ls-remote
lost-found: remove deprecated command
tar-tree: remove deprecated command
repo-config: remove deprecated alias for "git config"
|
|
When the built-in "git tar-tree" command (a thin wrapper around "git
archive") was removed in 925ceccf (tar-tree: remove deprecated
command, 2013-11-10), the build continued to install a non-functioning
git-tar-tree command in gitexecdir by mistake:
$ PATH=$(git --exec-path):$PATH
$ git-tar-tree -h
fatal: cannot handle tar-tree internally
The list of links in gitexecdir is populated from BUILTIN_OBJS, which
includes builtin/tar-tree.o to implement "git get-tar-commit-id".
Rename the get-tar-commit-id source file to builtin/get-tar-commit-id.c
to reflect its purpose and fix 'make install'.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some platforms ship Perl modules used by git scripts outside the
default perl path (e.g., on Mac OS X, Subversion's perl bindings live
in a separate xcode perl path). Add an PERLLIB_EXTRA variable to hold
a colon-separated list of extra directories to add to the perl path in
git's scripts, as a convenience for packagers.
Requested-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This has been deprecated since commit 87194d2 (Deprecate peek-remote,
2007-11-24), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git lost-found" has been deprecated since commit fc8b5f0 (Deprecate
git-lost-found, 2007-11-08), included in version 1.5.4.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The release notes for Git 1.5.4 say that "git repo-config" will be
removed in the next feature release. Since Git 2.0 is nearly here,
remove it.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hash table that stores the packing list for a given `pack-objects`
run was tightly coupled to the pack-objects code.
In this commit, we refactor the hash table and the underlying storage
array into a `packing_data` struct. The functionality for accessing and
adding entries to the packing list is hence accessible from other parts
of Git besides the `pack-objects` builtin.
This refactoring is a requirement for further patches in this series
that will require accessing the commit packing list from outside of
`pack-objects`.
The hash table implementation has been minimally altered: we now
use table sizes which are always a power of two, to ensure a uniform
index distribution in the array.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite "git repack" in C.
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
|
|
Sparse issues an "using sizeof on a function" warning for each
call to curl_easy_setopt() which sets an option that takes a
function pointer parameter. (currently 12 such warnings over 4
files.)
The warnings relate to the use of the "typecheck-gcc.h" header
file which adds a layer of type-checking macros to the curl
function invocations (for gcc >= 4.3 and !__cplusplus). As part
of the type-checking layer, 'sizeof' is applied to the function
parameter of curl_easy_setopt(). Note that, in the context of
sizeof, the function to function pointer conversion is not
performed and that sizeof(f) != sizeof(&f).
A simple solution, therefore, would be to replace the function
name in each such call to curl_easy_setopt() with an explicit
function pointer expression (i.e. replace f with &f).
However, the "typecheck-gcc.h" header file is only conditionally
included, in addition to the gcc and C++ checks mentioned above,
depending on the CURL_DISABLE_TYPECHECK preprocessor variable.
In order to suppress the warnings, we use target-specific variable
assignments to add -DCURL_DISABLE_TYPECHECK to SPARSE_FLAGS for
each file affected (http-push.c, http.c, http-walker.c and
remote-curl.c).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The motivation of this patch is to get closer to a goal of being
able to have a core subset of git functionality built in to git.
That would mean
* people on Windows could get a copy of at least the core parts
of Git without having to install a Unix-style shell
* people using git in on servers with chrooted environments
do not need to worry about standard tools lacking for shell
scripts.
This patch is meant to be mostly a literal translation of the
git-repack script; the intent is that later patches would start using
more library facilities, but this patch is meant to be as close to a
no-op as possible so it doesn't do that kind of thing.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove now disused remote-helpers framework for helpers written in
Python.
* jk/remove-remote-helpers-in-python:
git_remote_helpers: remove little used Python library
|
|
Send a large request to read(2)/write(2) as a smaller but still
reasonably large chunks, which would improve the latency when the
operation needs to be killed and incidentally works around broken
64-bit systems that cannot take a 2GB write or read in one go.
* sp/clip-read-write-to-8mb:
Revert "compat/clipped-write.c: large write(2) fails on Mac OS X/XNU"
xread, xwrite: limit size of IO to 8MB
|
|
Allow section.<urlpattern>.var configuration variables to be
treated as a "virtual" section.var given a URL, and use the
mechanism to enhance http.* configuration variables.
This is a reroll of Kyle J. McKay's work.
* jc/url-match:
builtin/config.c: compilation fix
config: "git config --get-urlmatch" parses section.<url>.key
builtin/config: refactor collect_config()
config: parse http.<url>.<variable> using urlmatch
config: add generic callback wrapper to parse section.<url>.key
config: add helper to normalize and match URLs
http.c: fix parsing of http.sslCertPasswordProtected variable
|
|
When it was originally added, the git_remote_helpers library was used as
part of the tests of the remote-helper interface, but since commit
fc407f9 (Add new simplified git-remote-testgit, 2012-11-28) a simple
shell script is used for this.
A search on Ohloh [1] indicates that this library isn't used by any
external projects and even the Python remote helpers in contrib/ don't
use this library, so it is only used by its own test suite.
Since this is the only Python library in Git, removing it will make
packaging easier as the Python scripts only need to be installed for one
version of Python, whereas the library should be installed for all
available versions.
[1] http://code.ohloh.net/search?s=%22git_remote_helpers%22
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* da/darwin:
OS X: Fix redeclaration of die warning
Makefile: Fix APPLE_COMMON_CRYPTO with BLK_SHA1
imap-send: use Apple's Security framework for base64 encoding
|
|
This reverts commit 6c642a878688adf46b226903858b53e2d31ac5c3.
The previous commit introduced a size limit on IO chunks on all
platforms. The compat clipped_write() is not needed anymore.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the urlmatch_config_entry() to wrap the underlying
http_options() two-level variable parser in order to set
http.<variable> to the value with the most specific URL in the
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It used to be that APPLE_COMMON_CRYPTO did nothing when BLK_SHA1 was
set. But APPLE_COMMON_CRYPTO is now used for more than just SHA1 (see
3ef2bca) so make sure that the appropriate libraries are always set.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Dave Borowitz
Jiang Xin
Nguyễn Thái Ngọc Duy
Jeff King
Justin Lebar
Дилян Палаузов
Thomas Gummerer
John Keeping
Johannes Sixt
Vicent Marti
Jonathan Nieder
Karsten Blees
Ramsay Jones
Stefan Beller
Steffen Prohaska
Kyle J. McKay
Brian Gernhardt