| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
|
|
The "detect attempt to create collisions" variant of SHA-1
implementation by Marc Stevens (CWI) and Dan Shumow (Microsoft)
has been integrated and made the default.
* jk/sha1dc:
Makefile: make DC_SHA1 the default
t0013: add a basic sha1 collision detection test
Makefile: add DC_SHA1 knob
sha1dc: disable safe_hash feature
sha1dc: adjust header includes for git
sha1dc: add collision-detecting sha1 implementation
|
|
Add t/helper/test-lazy-init-name-hash.c test code
to demonstrate performance times for lazy_init_name_hash()
using the original single-threaded and the new multi-threaded
code paths.
Includes a --dump option to dump the created hashmaps to
stdout. You can use this to run both code paths and
confirm that they generate the same hashmaps.
Includes a --analyze option to analyze performance of both
code paths over a range of index sizes to help you find a
lower bound for the LAZY_THREAD_COST in name-hash.c.
For example, passing "-a 4000" will set "istate.cache_nr"
to 4000 and then try the multi-threaded code -- probably
giving 2 threads with 2000 entries each. It will then
run both the single-threaded (1x4000) and the multi-threaded
(2x2000) and compare the times. It will then repeat the
test with 8000, 12000, and etc. so that you can see the
cross over.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our source code has used the SHA1_HEADER cpp macro after "#include"
in the C code to switch among the SHA-1 implementations. Instead,
list the exact header file names and switch among implementations
using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif";
this helps some IDE tools.
* bc/sha1-header-selection-with-cpp-macros:
hash.h: move SHA-1 implementation selection into a header file
|
|
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
|
|
We used to use the SHA1 implementation from the OpenSSL library by
default. As we are trying to be careful against collision attacks
after the recent "shattered" announcement, switch the default to
encourage people to use DC_SHA1 implementation instead. Those who
want to use the implementation from OpenSSL can explicitly ask for
it by OPENSSL_SHA1=YesPlease when running "make".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't actually have a Git-object collision, so the best
we can do is to run one of the shattered PDFs through
test-sha1. This should trigger the collision check and die.
In a sense this isn't really checking anything that the
upstream sha1collisiondetection project doesn't cover
already. But it at least makes sure that our build correctly
uses the library.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This knob lets you use the sha1dc implementation from:
https://github.com/cr-marcstevens/sha1collisiondetection
which can detect certain types of collision attacks (even
when we only see half of the colliding pair). So it
mitigates any attack which consists of getting the "good"
half of a collision into a trusted repository, and then
later replacing it with the "bad" half. The "good" half is
rejected by the victim's version of Git (and even if they
run an old version of Git, any sha1dc-enabled git will
complain loudly if it ever has to interact with the object).
The big downside is that it's slower than either the openssl
or block-sha1 implementations.
Here are some timings based off of linux.git:
- compute sha1 over whole packfile
sha1dc: 3.580s
blk-sha1: 2.046s (-43%)
openssl: 1.335s (-62%)
- rev-list --all --objects
sha1dc: 33.512s
blk-sha1: 33.514s (+0.0%)
openssl: 33.650s (+0.4%)
- git log --no-merges -10000 -p
sha1dc: 8.124s
blk-sha1: 7.986s (-1.6%)
openssl: 8.203s (+0.9%)
- index-pack --verify
sha1dc: 4m19s
blk-sha1: 2m57s (-32%)
openssl: 2m19s (-42%)
So overall the sha1 computation with collision detection is
about 1.75x slower than block-sha1, and 2.7x slower than
sha1. But of course most operations do more than just sha1.
Normal object access isn't really slowed at all (both the
+/- changes there are well within the run-to-run noise); any
changes are drowned out by the other work Git is doing.
The most-affected operation is `index-pack --verify`, which
is essentially just computing the sha1 on every object. This
is similar to the `index-pack` invocation that the receiver
of a push or fetch would perform. So clearly there's some
extra CPU load here.
There will also be some latency for the user, though keep in
mind that such an operation will generally be network bound
(this is about a 1.2GB packfile). Some of that extra CPU is
"free" in the sense that we use it while the pack is
streaming in anyway. But most of it comes during the
delta-resolution phase, after the whole pack has been
received. So we can imagine that for this (quite large)
push, the user might have to wait an extra 100 seconds over
openssl (which is what we use now). If we assume they can
push to us at 20Mbit/s, that's 480s for a 1.2GB pack, which
is only 20% slower.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many developers use functionality in their editors that allows for quick
syntax checks, including warning about questionable constructs. This
functionality allows rapid development with fewer errors. However, such
functionality generally does not allow the specification of
project-specific defines or command-line options.
Since the SHA1_HEADER include is not defined in such a case,
developers see spurious errors when using these tools. Furthermore,
there are known implementations of "cc" whose '#include' is unhappy
with this construct.
Instead of using SHA1_HEADER, create a hash.h header and use #if
and #elif to select the desired header. Have the Makefile pass an
appropriate option to help the header select the right implementation to
use.
[jc: make BLK_SHA1 the fallback default as discussed on list,
e.g. <20170314201424.vccij5z2ortq4a4o@sigill.intra.peff.net>; also
remove SHA1_HEADER and SHA1_HEADER_SQ that are no longer used].
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current test suite is good at letting you test a
particular version of Git. But it's not very good at letting
you test _two_ versions and seeing how they interact (e.g.,
one cloning from the other).
This commit adds a test harness that will build two
arbitrary versions of git and make it easy to call them from
inside your tests. See the README and the example script for
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rj/remove-unused-mktemp:
wrapper.c: remove unused gitmkstemps() function
wrapper.c: remove unused git_mkstemp() function
|
|
The last call to the mkstemps() function was removed in commit 659488326
("wrapper.c: delete dead function git_mkstemps()", 22-04-2016). In order
to support platforms without mkstemps(), this functionality was provided,
along with a Makefile build variable (NO_MKSTEMPS), by the gitmkstemps()
function. Remove the dead code, along with the defunct build machinery.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" starts using the recently updated "sequencer" code.
* js/rebase-helper:
rebase -i: use the rebase--helper builtin
rebase--helper: add a builtin helper for interactive rebases
|
|
Git's interactive rebase is still implemented as a shell script, despite
its complexity. This implies that it suffers from the portability point
of view, from lack of expressibility, and of course also from
performance. The latter issue is particularly serious on Windows, where
we pay a hefty price for relying so much on POSIX.
Unfortunately, being such a huge shell script also means that we missed
the train when it would have been relatively easy to port it to C, and
instead piled feature upon feature onto that poor script that originally
never intended to be more than a slightly pimped cherry-pick in a loop.
To open the road toward better performance (in addition to all the other
benefits of C over shell scripts), let's just start *somewhere*.
The approach taken here is to add a builtin helper that at first intends
to take care of the parts of the interactive rebase that are most
affected by the performance penalties mentioned above.
In particular, after we spent all those efforts on preparing the sequencer
to process rebase -i's git-rebase-todo scripts, we implement the `git
rebase -i --continue` functionality as a new builtin, git-rebase--helper.
Once that is in place, we can work gradually on tackling the rest of the
technical debt.
Note that the rebase--helper needs to learn about the transient
--ff/--no-ff options of git-rebase, as the corresponding flag is not
persisted to, and re-read from, the state directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is similar to many of our uses of sha1-array, but it
overcomes one limitation of a sha1-array: when you are
de-duplicating a large input with relatively few unique
entries, sha1-array uses 20 bytes per non-unique entry.
Whereas this set will use memory linear in the number of
unique entries (albeit a few more than 20 bytes due to
hashmap overhead).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Asciidoctor, an alternative reimplementation of AsciiDoc, still
needs some changes to work with documents meant to be formatted
with AsciiDoc. "make USE_ASCIIDOCTOR=YesPlease" to use it out of
the box to document our pages is getting closer to reality.
* bc/use-asciidoctor-opt:
Documentation: implement linkgit macro for Asciidoctor
Makefile: add a knob to enable the use of Asciidoctor
Documentation: move dblatex arguments into variable
Documentation: add XSLT to fix DocBook for Texinfo
Documentation: sort sources for gitman.texi
Documentation: remove unneeded argument in cat-texi.perl
Documentation: modernize cat-texi.perl
Documentation: fix warning in cat-texi.perl
|
|
Cruft removal.
* js/retire-relink:
relink: really remove the command
relink: retire the command
|
|
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
|
|
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
|
|
Back in the olden days, when all objects were loose and rubber boots were
made out of wood, it made sense to try to share (immutable) objects
between repositories.
Ever since the arrival of pack files, it is but an anachronism.
Let's move the script to the contrib/examples/ directory and no longer
offer it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function qsort_s() was introduced with C11 Annex K; it provides the
ability to pass a context pointer to the comparison function, supports
the convention of using a NULL pointer for an empty array and performs a
few safety checks.
Add an implementation based on compat/qsort.c for platforms that lack a
native standards-compliant qsort_s() (i.e. basically everyone). It
doesn't perform the full range of possible checks: It uses size_t
instead of rsize_t and doesn't check nmemb and size against RSIZE_MAX
because we probably don't have the restricted size type defined. For
the same reason it returns int instead of errno_t.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While Git has traditionally built its documentation using AsciiDoc, some
people wish to use Asciidoctor for speed or other reasons. Add a
Makefile knob, USE_ASCIIDOCTOR, that sets various options in order to
produce acceptable output. For HTML output, XHTML5 was chosen, since
the AsciiDoc options also produce XHTML, albeit XHTML 1.1.
Asciidoctor does not have built-in support for the linkgit macro, but it
is available using the Asciidoctor Extensions Lab. Add a macro to
enable the use of this extension if it is available. Without it, the
linkgit macros are emitted into the output.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It served its purpose, but now we have a builtin difftool. Time for the
Perl script to enjoy Florida.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a builtin difftool that still falls back to the legacy Perl
version, which has been renamed to `legacy-difftool`.
The idea is that the new, experimental, builtin difftool immediately hands
off to the legacy difftool for now, unless the config variable
difftool.useBuiltin is set to true.
This feature flag will be used in the upcoming Git for Windows v2.11.0
release, to allow early testers to opt-in to use the builtin difftool and
flesh out any bugs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This matches up with the targets git-%, git-http-fetch, git-http-push
and git-remote-testsvn. It must be done this way in Cygwin else lcrypto
cannot find lgdi32 and lws2_32.
Signed-off-by: Steven Penny <svnpenn@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When environment variable POSIXLY_CORRECT is set, the
"input -o output" syntax is not supported.
http://cygwin.com/ml/cygwin/2017-01/msg00036.html
Use "-i input -o output" syntax instead.
Signed-off-by: Steven Penny <svnpenn@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Porcelain scripts written in Perl are getting internationalized.
* va/i18n-perl-scripts:
i18n: difftool: mark warnings for translation
i18n: send-email: mark composing message for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark strings for translation
i18n: add--interactive: mark status words for translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark edit_hunk_manually message for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: mark plural strings
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark strings with interpolation for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings for translation
Git.pm: add subroutines for commenting lines
|
|
Update the procedure to generate "tags" for developer support.
* jk/make-tags-find-sources-tweak:
Makefile: exclude contrib from FIND_SOURCE_FILES
Makefile: match shell scripts in FIND_SOURCE_FILES
Makefile: exclude test cruft from FIND_SOURCE_FILES
Makefile: reformat FIND_SOURCE_FILES
|
|
Mark prompt message assembled in place for translation, unfolding each
use case for each entry in the %patch_modes hash table.
Previously, this script relied on whether $patch_mode was set to run the
command patch_update_cmd() or show status and loop the main loop. Now,
it uses $cmd to indicate we must run patch_update_cmd() and $patch_mode
is used to tell which flavor of the %patch_modes are we on. This is
introduced in order to be able to mark and unfold the message prompt
knowing in which context we are.
The tracking of context was done previously by point %patch_mode_flavour
hash table to the correct entry of %patch_modes, focusing only on value
of %patch_modes. Now, we are also interested in the key ('staged',
'stash', 'checkout_head', ...).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark plural strings for translation. Unfold each action case in one
entire sentence.
Pass new keyword for xgettext to extract.
Update test to include new subroutine __n() for plural strings handling.
Update documentation to include a description of the new __n()
subroutine.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When you're working on the git project, you're unlikely to
care about random bits in contrib/ (e.g., you would not want
to jump to the copy of xmalloc in the wincred credential
helper). Nobody has really complained because there are
relatively few C files in contrib.
Now that we're matching shell scripts, too, we get quite a
few more hits, especially in the obsolete contrib/examples
directory. Looking for usage() should turn up the one in
git-sh-setup, not in some long-dead version of git-clone.
Let's just exclude all of contrib. Any specific projects
there which are big enough to want tags can generate them
separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We feed FIND_SOURCE_FILES to ctags to help developers
navigate to particular functions, but we only feed C source
code. The same feature can be helpful when working with
shell scripts (especially the test suite). Modern versions
of ctags know how to parse shell scripts; we just need to
feed the filenames to it.
This patch specifically avoids including the individual test
scripts themselves. Those are unlikely to be of interest,
and there are a lot of them to process. It does pick up
test-lib.sh and test-lib-functions.sh.
Note that our negative pathspec already excludes the
individual scripts for the ls-files case, but we need to
loosen the `find` rule to match it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test directory may contain three types of files that
match our patterns:
1. Helper programs in t/helper.
2. Sample data files (e.g., t/t4051/hello.c).
3. Untracked cruft in trash directories and t/perf/build.
We want to match (1), but not the other two, as they just
clutter up the list.
For the ls-files method, we can drop (2) with a negative
pathspec. We do not have to care about (3), since ls-files
will not list untracked files.
For `find`, we can match both cases with `-prune` patterns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we add to this in future commits, the formatting is going
to make it harder and harder to read. Let's write it more as
we would in a shell script, putting each logical block on
its own line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The xdiff code hashes every line of both sides of a diff,
and then compares those hashes to find duplicates. The
overall performance depends both on how fast we can compute
the hashes, but also on how many hash collisions we see.
The idea of XDL_FAST_HASH is to speed up the hash
computation. But the generated hashes have worse collision
behavior. This means that in some cases it speeds diffs up
(running "git log -p" on git.git improves by ~8% with it),
but in others it can slow things down. One pathological case
saw over a 100x slowdown[1].
There may be a better hash function that covers both
properties, but in the meantime we are better off with the
original hash. It's slightly slower in the common case, but
it has fewer surprising pathological cases.
[1] http://public-inbox.org/git/20141222041944.GA441@peff.net/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Portability update and workaround for builds on recent Mac OS X.
* ls/macos-update:
travis-ci: disable GIT_TEST_HTTPD for macOS
Makefile: set NO_OPENSSL on macOS by default
|
|
Apple removed the OpenSSL header files in macOS 10.11 and above. OpenSSL
was deprecated since macOS 10.7.
Set `NO_OPENSSL` and `APPLE_COMMON_CRYPTO` to `YesPlease` as default for
macOS. It is possible to override this and use OpenSSL by defining
`NO_APPLE_COMMON_CRYPTO`.
Original-patch-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order for the receiving end of "git push" to inspect the
received history and decide to reject the push, the objects sent
from the sending end need to be made available to the hook and
the mechanism for the connectivity check, and this was done
traditionally by storing the objects in the receiving repository
and letting "git gc" to expire it. Instead, store the newly
received objects in a temporary area, and make them available by
reusing the alternate object store mechanism to them only while we
decide if we accept the check, and once we decide, either migrate
them to the repository or purge them immediately.
* jk/quarantine-received-objects:
tmp-objdir: do not migrate files starting with '.'
tmp-objdir: put quarantine information in the environment
receive-pack: quarantine objects until pre-receive accepts
tmp-objdir: introduce API for temporary object directories
check_connected: accept an env argument
|
|
Once objects are added to the object database by a process,
they cannot easily be deleted, as we don't know what other
processes may have started referencing them. We have to
clean them up with git-gc, which will apply the usual
reachability and grace-period checks.
This patch provides an alternative: it helps callers create
a temporary directory inside the object directory, and a
temporary environment which can be passed to sub-programs to
ask them to write there (the original object directory
remains accessible as an alternate of the temporary one).
See tmp-objdir.h for details on the API.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a make variable, SPATCH_FLAGS, for specifying flags for spatch, and
set it to --all-includes by default. This option lets it consider
header files which would otherwise be ignored. That's important for
some rules that rely on type information. It doubles the duration of
coccicheck, however.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths in "git diff" used regexec(3) on a buffer that was
mmap(2)ed, which may not have a terminating NUL, leading to a read
beyond the end of the mapped region. This was fixed by introducing
a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND
extension.
* js/regexec-buf:
regex: use regexec_buf()
regex: add regexec_buf() that can work on a non NUL-terminated string
regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
|
|
Code cleanup.
* rs/cocci:
use strbuf_addstr() for adding constant strings to a strbuf, part 2
add coccicheck make target
contrib/coccinelle: fix semantic patch for oid_to_hex_r()
|
|
We just introduced a test that demonstrates that our sloppy use of
regexec() on a mmap()ed area can result in incorrect results or even
hard crashes.
So what we need to fix this is a function that calls regexec() on a
length-delimited, rather than a NUL-terminated, string.
Happily, there is an extension to regexec() introduced by the NetBSD
project and present in all major regex implementation including
Linux', MacOSX' and the one Git includes in compat/regex/: by using
the (non-POSIX) REG_STARTEND flag, it is possible to tell the
regexec() function that it should only look at the offsets between
pmatch[0].rm_so and pmatch[0].rm_eo.
That is exactly what we need.
Since support for REG_STARTEND is so widespread by now, let's just
introduce a helper function that always uses it, and tell people
on a platform whose regex library does not support it to use the
one from our compat/regex/ directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git am" has been taught to make an internal call to "git apply"'s
innards without spawning the latter as a separate process.
* cc/apply-am: (41 commits)
builtin/am: use apply API in run_apply()
apply: learn to use a different index file
apply: pass apply state to build_fake_ancestor()
apply: refactor `git apply` option parsing
apply: change error_routine when silent
usage: add get_error_routine() and get_warn_routine()
usage: add set_warn_routine()
apply: don't print on stdout in verbosity_silent mode
apply: make it possible to silently apply
apply: use error_errno() where possible
apply: make some parsing functions static again
apply: move libified code from builtin/apply.c to apply.{c,h}
apply: rename and move opt constants to apply.h
builtin/apply: rename option parsing functions
builtin/apply: make create_one_file() return -1 on error
builtin/apply: make try_create_file() return -1 on error
builtin/apply: make write_out_results() return -1 on error
builtin/apply: make write_out_one_result() return -1 on error
builtin/apply: make create_file() return -1 on error
builtin/apply: make add_index_file() return -1 on error
...
|
|
Provide a simple way to run Coccinelle against all source files, in the
form of a Makefile target. Running "make coccicheck" applies each
.cocci file in contrib/coccinelle/ on all source files. It generates
a .patch file for each .cocci file, containing the actual changes for
effecting the transformations described by the semantic patches.
Non-empty .patch files are reported. They can be applied to the work
tree using "patch -p0", but should be checked to e.g. make sure they
don't screw up formatting or create circular references.
Coccinelle's diagnostic output (stderr) is piped into .log files.
Linux has a much more elaborate make target of the same name; let's
start nice and easy.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/compat-strdup:
compat: move strdup(3) replacement to its own file
|
|
There are certain house-keeping tasks that need to be performed at
the very beginning of any Git program, and programs that are not
built-in commands had to do them exactly the same way as "git"
potty does. It was easy to make mistakes in one-off standalone
programs (like test helpers). A common "main()" function that
calls cmd_main() of individual program has been introduced to
make it harder to make mistakes.
* jk/common-main:
mingw: declare main()'s argv as const
common-main: call git_setup_gettext()
common-main: call restore_sigpipe_to_default()
common-main: call sanitize_stdfds()
common-main: call git_extract_argv0_path()
add an extra level of indirection to main()
|
|
Move our implementation of strdup(3) out of compat/nedmalloc/ and
allow it to be used independently from USE_NED_ALLOCATOR. The
original nedmalloc doesn't come with strdup() and doesn't need it.
Only _users_ of nedmalloc need it, which was added when we imported
it to our compat/ hierarchy.
This reduces the difference of our copy of nedmalloc from the
original, making it easier to update, and allows for easier testing
and reusing of our version of strdup().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To libify `git apply` functionality we must make init_apply_state()
usable outside "builtin/apply.c".
Let's do that by moving it into a new "apply.c".
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The build procedure learned PAGER_ENV knob that lists what default
environment variable settings to export for popular pagers. This
mechanism is used to tweak the default settings to MORE on FreeBSD.
* ew/build-time-pager-tweaks:
pager: move pager-specific setup into the build
|
Junio C Hamano
Jeff Hostetler
Jeff King
brian m. carlson
Ramsay Jones
Johannes Schindelin
René Scharfe
Steven Penny
Vasco Almeida
Lars Schneider
Christian Couder