| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A configuration element used for credential subsystem can now use
wildcard pattern to specify for which set of URLs the entry
applies.
* bc/wildcard-credential:
credential: allow wildcard patterns when matching config
credential: use the last matching username in the config
t0300: add tests for some additional cases
t1300: add test for urlmatch with multiple wildcards
mailmap: add an additional email address for brian m. carlson
|
|
"git sparse-checkout" learned a new "add" subcommand.
* ds/sparse-add:
sparse-checkout: allow one-character directories in cone mode
sparse-checkout: work with Windows paths
sparse-checkout: create 'add' subcommand
sparse-checkout: extract pattern update from 'set' subcommand
sparse-checkout: extract add_patterns_from_input()
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
|
|
"git check-ignore" did not work when the given path is explicitly
marked as not ignored with a negative entry in the .gitignore file.
* en/check-ignore:
check-ignore: fix documentation and implementation to match
|
|
Doc markup fix.
* jk/push-option-doc-markup-fix:
doc/config/push: use longer "--" line for preformatted example
|
|
Update to doc-diff.
* jk/doc-diff-parallel:
doc-diff: use single-colon rule in rendering Makefile
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc for new contributors.
* es/doc-mentoring:
MyFirstContribution: rephrase contact info
MyFirstContribution: add avenues for getting help
|
|
The basic 7 colors learned the brighter counterparts
(e.g. "brightred").
* es/bright-colors:
color.c: alias RGB colors 8-15 to aixterm colors
color.c: support bright aixterm colors
color.c: refactor color_output arguments
|
|
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
|
|
In some cases, a user will want to use a specific credential helper for
a wildcard pattern, such as https://*.corp.example.com. We have code
that handles this already with the urlmatch code, so let's use that
instead of our custom code.
Since the urlmatch code is a superset of our current matching in terms
of capabilities, there shouldn't be any cases of things that matched
previously that don't match now. However, in addition to wildcard
matching, we now use partial path matching, which can cause slightly
different behavior in the case that a helper applies to the prefix
(considering path components) of the remote URL. While different, this
is probably the behavior people were wanting anyway.
Since we're using the urlmatch code, we need to encode the components
we've gotten into a URL to match, so add a function to percent-encode
data and format the URL with it. We now also no longer need to the
custom code to match URLs, so let's remove it.
Additionally, the urlmatch code always looks for the best match, whereas
we want all matches for credential helpers to preserve existing
behavior. Let's add an optional field, select_fn, that lets us control
which items we want (in this case, all of them) and default it to the
best-match code that already exists for other users.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ignore has two different modes, and neither of these modes has an
implementation that matches the documentation. These modes differ in
whether they just print paths or whether they also print the final
pattern matched by the path. The fix is different for both modes, so
I'll discuss both separately.
=== First (default) mode ===
The first mode is documented as:
For each pathname given via the command-line or from a file via
--stdin, check whether the file is excluded by .gitignore (or other
input files to the exclude mechanism) and output the path if it is
excluded.
However, it fails to do this because it did not account for negated
patterns. Commands other than check-ignore verify exclusion rules via
calling
... -> treat_one_path() -> is_excluded() -> last_matching_pattern()
while check-ignore has a call path of the form:
... -> check_ignore() -> last_matching_pattern()
The fact that the latter does not include the call to is_excluded()
means that it is susceptible to to messing up negated patterns (since
that is the only significant thing is_excluded() adds over
last_matching_pattern()). Unfortunately, we can't make it just call
is_excluded(), because the same codepath is used by the verbose mode
which needs to know the matched pattern in question. This brings us
to...
=== Second (verbose) mode ===
The second mode, known as verbose mode, references the first in the
documentation and says:
Also output details about the matching pattern (if any) for each
given pathname. For precedence rules within and between exclude
sources, see gitignore(5).
The "Also" means it will print patterns that match the exclude rules as
noted for the first mode, and also print which pattern matches. Unless
more information is printed than just pathname and pattern (which is not
done), this definition is somewhat ill-defined and perhaps even
self-contradictory for negated patterns: A path which matches a negated
exclude pattern is NOT excluded and thus shouldn't be printed by the
former logic, while it certainly does match one of the explicit patterns
and thus should be printed by the latter logic.
=== Resolution ==
Since the second mode exists to find out which pattern matches given
paths, and showing the user a pattern that begins with a '!' is
sufficient for them to figure out whether the pattern is excluded, the
existing behavior is desirable -- we just need to update the
documentation to match the implementation (i.e. it is about printing
which pattern is matched by paths, not about showing which paths are
excluded).
For the first or default mode, users just want to know whether a pattern
is excluded. As such, the existing documentation is desirable; change
the implementation to match the documented behavior.
Finally, also adjust a few tests in t0008 that were caught up by this
discrepancy in how negated paths were handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rendering the troff manpages to text via "man", we create an ad-hoc
Makefile and feed it to "make". The purpose here is two-fold:
- reuse results from a prior interrupted render of the same tree
- use make's -j option to build in parallel
But the second part doesn't seem to work (at least with my version of
GNU make, 4.2.1). It just runs one render at a time.
We use a double-colon "all" rule for each file, like:
all:: foo
foo:
...actual render recipe...
all:: bar
bar:
...actual render recipe...
...and so on...
And it's this double-colon that seems to inhibit the parallelism. We can
just switch to a regular single-colon rule. Even though we do have
multiple rules for "all" here, we don't have any recipe to execute for
"all" (we only care about triggering its dependencies), so the
distinction is irrelevant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The example for the push.pushOption config tries to create a
preformatted section, but uses only two dashes in its "--" line. In
AsciiDoc this is an "open block", with no type; the lines end up jumbled
because they're formatted as paragraphs. We need four or more dashes to
make it a "listing block" that will respect the linebreaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* jk/doc-credential-helper:
doc: move credential helper info into gitcredentials(7)
|
|
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The am-backend drops information and thus limits what we can do:
* lack of full tree information from the original commits means we
cannot do directory rename detection and warn users that they might
want to move some of their new files that they placed in old
directories to prevent their becoming orphaned.[1]
* reduction in context from only having a few lines beyond those
changed means that when context lines are non-unique we can apply
patches incorrectly.[2]
* lack of access to original commits means that conflict marker
annotation has less information available.
* the am backend has safety problems with an ill-timed interrupt.
Also, the merge/interactive backend have far more abilities, appear to
currently have a slight performance advantage[3] and have room for more
optimizations than the am backend[4] (and work is underway to take
advantage of some of those possibilities).
[1] https://lore.kernel.org/git/xmqqh8jeh1id.fsf@gitster-ct.c.googlers.com/
[2] https://lore.kernel.org/git/CABPp-BGiu2nVMQY_t-rnFR5GQUz_ipyEE8oDocKeO+h+t4Mn4A@mail.gmail.com/
[3] https://public-inbox.org/git/CABPp-BF=ev03WgODk6TMQmuNoatg2kiEe5DR__gJ0OTVqHSnfQ@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BGh7yW69QwxQb13K0HM38NKmQif3A6C6UULEKYnkEJ5vA@mail.gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, this option doesn't do anything except error out if any
options requiring the interactive-backend are also passed. However,
when we make the default backend configurable later in this series, this
flag will provide a way to override the config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The details of how credential helpers can be called or implemented were
originally covered in Documentation/technical/. Those are topics that
end users might care about (and we even referenced them in the
credentials manpage), but those docs typically don't ship as part of the
end user documentation, making them less useful.
This situation got slightly worse recently in f3b9055624 (credential:
move doc to credential.h, 2019-11-17), where we moved them into the C
header file, making them even harder to find.
So let's move put this information into the gitcredentials(7)
documentation, which is meant to describe the overall concepts of our
credential handling. This was already pointing to the API docs for these
concepts, so we can just include it inline instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to compute the commit-graph has been taught to use a more
robust way to tell if two object directories refer to the same
thing.
* tb/commit-graph-object-dir:
commit-graph.h: use odb in 'load_commit_graph_one_fd_st'
commit-graph.c: remove path normalization, comparison
commit-graph.h: store object directory in 'struct commit_graph'
commit-graph.h: store an odb in 'struct write_commit_graph_context'
t5318: don't pass non-object directory to '--object-dir'
|
|
Some rough edges in the sparse-checkout feature, especially around
the cone mode, have been cleaned up.
* ds/sparse-checkout-harden:
sparse-checkout: fix cone mode behavior mismatch
sparse-checkout: improve docs around 'set' in cone mode
sparse-checkout: escape all glob characters on write
sparse-checkout: use C-style quotes in 'list' subcommand
sparse-checkout: unquote C-style strings over --stdin
sparse-checkout: write escaped patterns in cone mode
sparse-checkout: properly match escaped characters
sparse-checkout: warn on globs in cone patterns
sparse-checkout: detect short patterns
sparse-checkout: cone mode does not recognize "**"
sparse-checkout: fix documentation typo for core.sparseCheckoutCone
clone: fix --sparse option with URLs
sparse-checkout: create leading directories
t1091: improve here-docs
t1091: use check_files to reduce boilerplate
|
|
A new version of fsmonitor-watchman hook has been introduced, to
avoid races.
* kw/fsmonitor-watchman-racefix:
fsmonitor: update documentation for hook version and watchman hooks
fsmonitor: add fsmonitor hook scripts for version 2
fsmonitor: handle version 2 of the hooks that will use opaque token
fsmonitor: change last update timestamp on the index_state to opaque token
|
|
Traditionally, we avoided threaded grep while searching in objects
(as opposed to files in the working tree) as accesses to the object
layer is not thread-safe. This limitation is getting lifted.
* mt/threaded-grep-in-object-store:
grep: use no. of cores as the default no. of threads
grep: move driver pre-load out of critical section
grep: re-enable threads in non-worktree case
grep: protect packed_git [re-]initialization
grep: allow submodule functions to run in parallel
submodule-config: add skip_if_read option to repo_read_gitmodules()
grep: replace grep_read_mutex by internal obj read lock
object-store: allow threaded access to object reading
replace-object: make replace operations thread-safe
grep: fix racy calls in grep_objects()
grep: fix race conditions at grep_submodule()
grep: fix race conditions on userdiff calls
|
|
The transport protocol version 2 becomes the default one.
* jn/promote-proto2-to-default:
fetch: default to protocol version 2
protocol test: let protocol.version override GIT_TEST_PROTOCOL_VERSION
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate
config doc: protocol.version is not experimental
fetch test: use more robust test for filtered objects
|
|
The way "git pack-objects" reuses objects stored in existing pack
to generate its result has been improved.
* jk/packfile-reuse-cleanup:
pack-bitmap: don't rely on bitmap_git->reuse_objects
pack-objects: add checks for duplicate objects
pack-objects: improve partial packfile reuse
builtin/pack-objects: introduce obj_is_packed()
pack-objects: introduce pack.allowPackReuse
csum-file: introduce hashfile_total()
pack-bitmap: simplify bitmap_has_oid_in_uninteresting()
pack-bitmap: uninteresting oid can be outside bitmapped packfile
pack-bitmap: introduce bitmap_walk_contains()
ewah/bitmap: introduce bitmap_word_alloc()
packfile: expose get_delta_base()
builtin/pack-objects: report reused packfile objects
|
|
Two help messages given when "git add" notices the user gave it
nothing to add have been updated to use advise() API.
* hw/advice-add-nothing:
add: change advice config variables used by the add API
add: use advise function to display hints
|
|
Doc fix.
* jb/multi-pack-index-docfix:
pack-format: correct multi-pack-index description
|
|
Doc clarification.
* ma/diff-doc-clarify-regexp-example:
diff-options.txt: avoid "regex" overload in example
|
|
Technical details of the bundle format has been documented.
I think this is in a good enough shape.
* ms/doc-bundle-format:
doc: describe Git bundle format
|
|
Doc mark-up updates.
* ma/filter-branch-doc-caret:
git-filter-branch.txt: wrap "maths" notation in backticks
|
|
Docfix.
* km/submodule-doc-use-sm-path:
submodule foreach: replace $path with $sm_path in example
|
|
"git grep --no-index" should not get affected by the contents of
the .gitmodules file but when "--recurse-submodules" is given or
the "submodule.recurse" variable is set, it did. Now these
settings are ignored in the "--no-index" mode.
* pb/do-not-recurse-grep-no-index:
grep: ignore --recurse-submodules if --no-index is given
|
|
Doc updates.
* bc/misconception-doc:
docs: mention when increasing http.postBuffer is valuable
doc: dissuade users from trying to ignore tracked files
|
|
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
|
|
"git fetch --refmap=" option has got a better documentation.
* ds/refmap-doc:
fetch: document and test --refmap=""
|
|
Doc grammo fix.
* bc/actualmente:
docs: use "currently" for the present time
|
|
Complete an update to tutorial that encourages "git switch" over
"git checkout" that was done only half-way.
* hw/tutorial-favor-switch-over-checkout:
doc/gitcore-tutorial: fix prose to match example command
|
|
Make an effort not to discourage new users from mailing questions to
git@vger.kernel.org, and explain the purpose of the mentoring list in
contrast to the main list.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* jb/multi-pack-index-docfix:
pack-format: correct multi-pack-index description
|
Junio C Hamano
brian m. carlson
Elijah Newren
Jeff King
Emily Shaffer