summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2012-03-01diff --stat: add config option to limit graph widthLibravatar Zbigniew Jędrzejewski-Szmek2-7/+13
Config option diff.statGraphWidth=<width> is equivalent to --stat-graph-width=<width>, except that the config option is ignored by format-patch. For the graph-width limiting to be usable, it should happen 'automatically' once configured, hence the config option. Nevertheless, graph width limiting only makes sense when used on a wide terminal, so it should not influence the output of format-patch, which adheres to the 80-column standard. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: enable limiting of the graph partLibravatar Zbigniew Jędrzejewski-Szmek1-0/+2
A new option --stat-graph-width=<width> can be used to limit the width of the graph part even is more space is available. Up to <width> columns will be used for the graph. If commits changing a lot of lines are displayed in a wide terminal window (200 or more columns), and the +- graph uses the full width, the output can be hard to comfortably scan with a horizontal movement of human eyes. Messages wrapped to about 80 columns would be interspersed with very long +- lines. It makes sense to limit the width of the graph part to a fixed value (e.g. 70 columns), even if more columns are available. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-01diff --stat: use a maximum of 5/8 for the filename partLibravatar Zbigniew Jędrzejewski-Szmek1-6/+8
The way that available columns are divided between the filename part and the graph part is modified to use as many columns as necessary for the filenames and the rest for the graph. If there isn't enough columns to print both the filename and the graph, at least 5/8 of available space is devoted to filenames. On a standard 80 column terminal, or if not connected to a terminal and using the default of 80 columns, this gives the same partition as before. The effect of this change is visible in the patch to the test vector in t4052; with a small change with long filename, it stops truncating the name part too short, and also allocates a bit more columns to the graph for larger changes. Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-13Update draft release notes to 1.7.9.1Libravatar Junio C Hamano1-3/+19
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-10Update draft release notes to 1.7.9.1Libravatar Junio C Hamano1-0/+17
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-10Merge branch 'jc/maint-request-pull-for-tag' into maintLibravatar Junio C Hamano1-2/+2
* jc/maint-request-pull-for-tag: request-pull: explicitly ask tags/$name to be pulled
2012-02-06Prepare for 1.7.9.1Libravatar Junio C Hamano1-0/+19
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-05Sync with 1.7.6.6Libravatar Junio C Hamano1-1/+2
* maint-1.7.8: Git 1.7.6.6 imap-send: remove dead code
2012-02-05Sync with 1.7.6.6Libravatar Junio C Hamano1-1/+2
* maint-1.7.7: Git 1.7.6.6 imap-send: remove dead code
2012-02-05Sync with 1.7.6.6Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-05Git 1.7.6.6Libravatar Junio C Hamano1-1/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-31request-pull: explicitly ask tags/$name to be pulledLibravatar Junio C Hamano1-2/+2
When asking for a tag to be pulled, disambiguate by leaving tags/ prefix in front of the name of the tag. E.g. ... in the git repository at: git://example.com/git/git.git/ tags/v1.2.3 for you to fetch changes up to 123456... This way, older versions of "git pull" can be used to respond to such a request more easily, as "git pull $URL v1.2.3" did not DWIM to fetch v1.2.3 tag in older versions. Also this makes it clearer for humans that the pull request is made for a tag and he should anticipate a signed one. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-27Git 1.7.9Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-26docs: minor grammar fixes for v1.7.9 release notesLibravatar Jeff King1-6/+7
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-23Fix typo in 1.7.9 release notesLibravatar Michael Haggerty1-1/+1
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Git 1.7.9-rc2Libravatar Junio C Hamano1-9/+1
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'maint'Libravatar Junio C Hamano3-2/+12
* maint: Git 1.7.8.4 Git 1.7.7.6 diff-index: enable recursive pathspec matching in unpack_trees Conflicts: GIT-VERSION-GEN
2012-01-18Git 1.7.8.4Libravatar Junio C Hamano2-2/+8
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'maint-1.7.7' into maintLibravatar Junio C Hamano1-0/+4
* maint-1.7.7: Git 1.7.7.6 diff-index: enable recursive pathspec matching in unpack_trees Conflicts: GIT-VERSION-GEN
2012-01-18Git 1.7.7.6Libravatar Junio C Hamano1-0/+4
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'jc/pull-signed-tag-doc'Libravatar Junio C Hamano2-1/+221
* jc/pull-signed-tag-doc: pulling signed tag: add howto document
2012-01-18pulling signed tag: add howto documentLibravatar Junio C Hamano2-1/+221
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-18Merge branch 'nd/pathspec-recursion-cleanup'Libravatar Junio C Hamano1-0/+3
* nd/pathspec-recursion-cleanup: diff-index: enable recursive pathspec matching in unpack_trees Document limited recursion pathspec matching with wildcards
2012-01-18Merge branch 'mh/maint-show-ref-doc'Libravatar Junio C Hamano1-3/+3
* mh/maint-show-ref-doc: git-show-ref doc: typeset regexp in fixed width font git-show-ref: fix escaping in asciidoc source
2012-01-14Document limited recursion pathspec matching with wildcardsLibravatar Nguyễn Thái Ngọc Duy1-0/+3
It's actually unlimited recursion if wildcards are active regardless --max-depth Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-13git-show-ref doc: typeset regexp in fixed width fontLibravatar Michael Haggerty1-1/+1
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-13git-show-ref: fix escaping in asciidoc sourceLibravatar Michael Haggerty1-3/+3
Two "^" characters were incorrectly being interpreted as markup for superscripting. Fix them by writing them as attribute references "{caret}". Although a single "^" character in a paragraph cannot be misinterpreted in this way, also write other "^" characters as "{caret}" in the interest of good hygiene (unless they are in literal paragraphs, of course, in which context attribute references are not recognized). Spell "{}" consistently, namely *not* quoted as "\{\}". Since the braces are empty, they cannot be interpreted as an attribute reference, and either spelling is OK. So arbitrarily choose one variation and use it consistently. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-12Git 1.7.9-rc1Libravatar Junio C Hamano1-1/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-12Merge branch 'tr/maint-mailinfo'Libravatar Junio C Hamano1-7/+18
* tr/maint-mailinfo: mailinfo documentation: accurately describe non -k case
2012-01-12Merge branch 'maint'Libravatar Junio C Hamano3-0/+15
* maint: Update draft release notes to 1.7.8.4 Update draft release notes to 1.7.7.6 Update draft release notes to 1.7.6.6 thin-pack: try harder to use preferred base objects as base
2012-01-12Update draft release notes to 1.7.8.4Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-12Merge branch 'maint-1.7.7' into maintLibravatar Junio C Hamano2-0/+10
* maint-1.7.7: Update draft release notes to 1.7.7.6 Update draft release notes to 1.7.6.6 thin-pack: try harder to use preferred base objects as base
2012-01-12Update draft release notes to 1.7.7.6Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-12Merge branch 'maint-1.7.6' into maint-1.7.7Libravatar Junio C Hamano1-0/+5
* maint-1.7.6: Update draft release notes to 1.7.6.6 thin-pack: try harder to use preferred base objects as base
2012-01-12Update draft release notes to 1.7.6.6Libravatar Junio C Hamano1-0/+5
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-11mailinfo documentation: accurately describe non -k caseLibravatar Thomas Rast1-7/+18
Since its very first description of -k, the documentation for git-mailinfo claimed that (in the case without -k) after cleaning up bracketed strings [blah], it would insert [PATCH]. It doesn't; on the contrary, one of the important jobs of mailinfo is to remove those strings. Since we're already there, rewrite the paragraph to give a complete enumeration of all the transformations. Specifically, it was missing the whitespace normalization (run of isspace(c) -> ' ') and the removal of leading ':'. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Sync with maintLibravatar Junio C Hamano4-1/+38
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Prepare for 1.7.8.4Libravatar Junio C Hamano1-0/+14
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Merge the attributes fix in from maint-1.6.7 branchLibravatar Junio C Hamano3-1/+24
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Prepare for 1.7.7.6Libravatar Junio C Hamano1-0/+11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Merge the attributes fix in from maint-1.6.6 branchLibravatar Junio C Hamano2-1/+13
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Prepare for 1.7.6.6Libravatar Junio C Hamano1-0/+11
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-10Documentation: rerere's rr-cache auto-creation and rerere.enabledLibravatar Junio C Hamano1-1/+2
The description of rerere.enabled left the user in the dark as to who might create an rr-cache directory. Add a note that simply invoking rerere does this. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-06Git 1.7.9-rc0Libravatar Junio C Hamano1-0/+7
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-06Merge branch 'jc/show-sig'Libravatar Junio C Hamano3-7/+16
* jc/show-sig: log --show-signature: reword the common two-head merge case log-tree: show mergetag in log --show-signature output log-tree.c: small refactor in show_signature() commit --amend -S: strip existing gpgsig headers verify_signed_buffer: fix stale comment gpg-interface: allow use of a custom GPG binary pretty: %G[?GS] placeholders test "commit -S" and "log --show-signature" log: --show-signature commit: teach --gpg-sign option Conflicts: builtin/commit-tree.c builtin/commit.c builtin/merge.c notes-cache.c pretty.c
2012-01-06Merge branch 'jh/fetch-head-update'Libravatar Junio C Hamano1-1/+1
* jh/fetch-head-update: write first for-merge ref to FETCH_HEAD first
2012-01-06Merge branch 'pw/p4-view-updates'Libravatar Junio C Hamano1-13/+27
* pw/p4-view-updates: git-p4: view spec documentation git-p4: rewrite view handling git-p4: support single file p4 client view maps git-p4: sort client views by reverse View number git-p4: fix test for unsupported P4 Client Views git-p4: test client view handling
2012-01-06Sync with 1.7.8.3Libravatar Junio C Hamano3-5/+24
2012-01-06Git 1.7.8.3Libravatar Junio C Hamano2-1/+20
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-06Merge branch 'maint-1.7.7' into maintLibravatar Junio C Hamano1-4/+4
* maint-1.7.7: Documentation: rerere.enabled is the primary way to configure rerere
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-23 13:25:19 +0000