| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc cleanup.
* vn/revision-shorthand-for-side-branch-log:
doc/revisions: remove brackets from rev^-n shorthand
|
|
The diff options "--ours", "--theirs" exist for quite some time.
But so far they were not documented. Now they are.
* ah/diff-files-ours-theirs-doc:
diff-files: document --ours etc.
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
|
|
Given that other instances of "{...}" in the revision documentation
represent literal characters of revision specifications, describing
the rev^-n shorthand as "<rev>^-{<n>}" incorrectly suggests that
something like "master^-{1}" is an acceptable form.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* qp/bisect-docfix:
git-bisect.txt: add missing word
|
|
Doc update.
* mm/ls-files-s-doc:
Documentation: document elements in "ls-files -s" output in order
|
|
git-diff understands "--ours", "--theirs" and "--base" for files with
conflicts. But so far they were not documented for the central diff
command but only for diff-files.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
|
|
Signed-off-by: Quentin Pradet <quentin.pradet@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
List the fields in order of appearance in the command output.
Signed-off-by: Mostyn Bramley-Moore <mostyn@antipode.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the structure and functions have changed names, update the code
examples and the documentation. Rename the file to match the new name
of the API.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On many keyboards, typing "@{" involves holding down SHIFT key and
one can easily end up with "@{Up..." when typing "@{upstream}". As
the upstream/push keywords do not appear anywhere else in the syntax,
we can safely accept them case insensitively without introducing
ambiguity or confusion to solve this.
* ab/case-insensitive-upstream-and-push-marker:
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively
|
|
Doc update.
* ab/doc-submitting:
doc/SubmittingPatches: show how to get a CLI commit summary
doc/SubmittingPatches: clarify the casing convention for "area: change..."
|
|
"what URL do we want to update this submodule?" and "are we
interested in this submodule?" are split into two distinct
concepts, and then the way used to express the latter got extended,
paving a way to make it easier to manage a project with many
submodules and make it possible to later extend use of multiple
worktrees for a project with submodules.
* bw/submodule-is-active:
submodule add: respect submodule.active and submodule.<name>.active
submodule--helper init: set submodule.<name>.active
clone: teach --recurse-submodules to optionally take a pathspec
submodule init: initialize active submodules
submodule: decouple url and submodule interest
submodule--helper clone: check for configured submodules using helper
submodule sync: use submodule--helper is-active
submodule sync: skip work for inactive submodules
submodule status: use submodule--helper is-active
submodule--helper: add is-active subcommand
|
|
Stop supporting "git merge <message> HEAD <commit>" syntax that has
been deprecated since October 2007, and issues a deprecation
warning message since v2.5.0.
* jc/merge-drop-old-syntax:
merge: drop 'git merge <message> HEAD <commit>' syntax
|
|
Suppose I have a superproject 'super', with two submodules 'super/sub'
and 'super/sub1'. 'super/sub' itself contains a submodule
'super/sub/subsub'. Now suppose I run, from within 'super':
echo hi >sub/subsub/stray-file
echo hi >sub1/stray-file
Currently we get would see the following output in git-status:
git status --short
m sub
? sub1
With this patch applied, the untracked file in the nested submodule is
displayed as an untracked file on the 'super' level as well.
git status --short
? sub
? sub1
This doesn't change the output of 'git status --porcelain=1' for nested
submodules, because its output is always ' M' for either untracked files
or local modifications no matter the nesting level of the submodule.
'git status --porcelain=2' is affected by this change in a nested
submodule, though. Without this patch it would report the direct submodule
as modified and having no untracked files. With this patch it would report
untracked files. Chalk this up as a bug fix.
This bug fix also affects the default output (non-short, non-porcelain)
of git-status, which is not tested here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If I add an untracked file to a submodule or modify a tracked file,
currently "git status --short" treats the change in the same way as
changes to the current HEAD of the submodule:
$ git clone --quiet --recurse-submodules https://gerrit.googlesource.com/gerrit
$ echo hello >gerrit/plugins/replication/stray-file
$ sed -i -e 's/.*//' gerrit/plugins/replication/.mailmap
$ git -C gerrit status --short
M plugins/replication
This is by analogy with ordinary files, where "M" represents a change
that has not been added yet to the index. But this change cannot be
added to the index without entering the submodule, "git add"-ing it,
and running "git commit", so the analogy is counterproductive.
Introduce new status letters " ?" and " m" for this. These are similar
to the existing "??" and " M" but mean that the submodule (not the
parent project) has new untracked files and modified files, respectively.
The user can use "git add" and "git commit" from within the submodule to
add them.
Changes to the submodule's HEAD commit can be recorded in the index with
a plain "git add -u" and are shown with " M", like today.
To avoid excessive clutter, show at most one of " ?", " m", and " M" for
the submodule. They represent increasing levels of change --- the last
one that applies is shown (e.g., " m" if there are both modified files
and untracked files in the submodule, or " M" if the submodule's HEAD
has been modified and it has untracked files).
While making these changes, we need to make sure to not break porcelain
level 1, which shares code with "status --short". We only change
"git status --short".
Non-short "git status" and "git status --porcelain=2" already handle
these cases by showing more detail:
$ git -C gerrit status --porcelain=2
1 .M S.MU 160000 160000 160000 305c864db28eb0c77c8499bc04c87de3f849cf3c 305c864db28eb0c77c8499bc04c87de3f849cf3c plugins/replication
$ git -C gerrit status
[...]
modified: plugins/replication (modified content, untracked content)
Scripts caring about these distinctions should use --porcelain=2.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
The name-hash used for detecting paths that are different only in
cases (which matter on case insensitive filesystems) has been
optimized to take advantage of multi-threading when it makes sense.
* jh/memihash-opt:
name-hash: add test-lazy-init-name-hash to .gitignore
name-hash: add perf test for lazy_init_name_hash
name-hash: add test-lazy-init-name-hash
name-hash: perf improvement for lazy_init_name_hash
hashmap: document memihash_cont, hashmap_disallow_rehash api
hashmap: add disallow_rehash setting
hashmap: allow memihash computation to be continued
name-hash: specify initial size for istate.dir_hash table
|
|
Doc update.
* ab/branch-list-doc:
branch doc: update description for `--list`
branch doc: change `git branch <pattern>` to use `<branchname>`
|
|
"git checkout" is taught the "--recurse-submodules" option.
* sb/checkout-recurse-submodules:
builtin/read-tree: add --recurse-submodules switch
builtin/checkout: add --recurse-submodules switch
entry.c: create submodules when interesting
unpack-trees: check if we can perform the operation for submodules
unpack-trees: pass old oid to verify_clean_submodule
update submodules: add submodule_move_head
submodule.c: get_super_prefix_or_empty
update submodules: move up prepare_submodule_repo_env
submodules: introduce check to see whether to touch a submodule
update submodules: add a config option to determine if submodules are updated
update submodules: add submodule config parsing
make is_submodule_populated gently
lib-submodule-update.sh: define tests for recursing into submodules
lib-submodule-update.sh: replace sha1 by hash
lib-submodule-update: teach test_submodule_content the -C <dir> flag
lib-submodule-update.sh: do not use ./. as submodule remote
lib-submodule-update.sh: reorder create_lib_submodule_repo
submodule--helper.c: remove duplicate code
connect_work_tree_and_git_dir: safely create leading directories
|
|
|
|
Doc update.
* km/config-grammofix:
doc/config: grammar fixes for core.{editor,commentChar}
|
|
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* km/config-grammofix:
doc/config: grammar fixes for core.{editor,commentChar}
|
|
"git describe --dirty" dies when it cannot be determined if the
state in the working tree matches that of HEAD (e.g. broken
repository or broken submodule). The command learned a new option
"git describe --broken" to give "$name-broken" (where $name is the
description of HEAD) in such a case.
* sb/describe-broken:
builtin/describe: introduce --broken flag
|
|
Recently we started passing the "--push-options" through the
external remote helper interface; now the "smart HTTP" remote
helper understands what to do with the passed information.
* sb/push-options-via-transport:
remote-curl: allow push options
send-pack: send push options correctly in stateless-rpc case
|
|
Change the revision parsing logic to match @{upstream}, @{u} & @{push}
case-insensitively.
Before this change supplying anything except the lower-case forms
emits an "unknown revision or path not in the working tree"
error. This change makes upper-case & mixed-case versions equivalent
to the lower-case versions.
The use-case for this is being able to hold the shift key down while
typing @{u} on certain keyboard layouts, which makes the sequence
easier to type, and reduces cases where git throws an error at the
user where it could do what he means instead.
These suffixes now join various other suffixes & special syntax
documented in gitrevisions(7) that matches case-insensitively. A table
showing the status of the various forms documented there before &
after this patch is shown below. The key for the table is:
- CI = Case Insensitive
- CIP = Case Insensitive Possible (without ambiguities)
- AG = Accepts Garbage (.e.g. @{./.4.minutes./.})
Before this change:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | N | Y | N |
| @{push} | N | Y | N |
|----------------+-----+------+-----|
After it:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | Y | Y | N |
| @{push} | Y | Y | N |
|----------------+-----+------+-----|
The ^{<type>} suffix is not made case-insensitive, because other
places that take <type> like "cat-file -t <type>" do want them case
sensitively (after all we never declared that type names are case
insensitive). Allowing case-insensitive typename only with this syntax
will make the resulting Git as a whole inconsistent.
This change was independently authored to scratch a longtime itch, but
when I was about to submit it I discovered that a similar patch had
been submitted unsuccessfully before by Conrad Irwin in August 2011 as
"rev-parse: Allow @{U} as a synonym for
@{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>).
The tests for this patch are more exhaustive than in the 2011
submission. The starting point for them was to first change the code
to only support upper-case versions of the existing words, seeing what
broke, and amending the breaking tests to check upper case & mixed
case as appropriate, and where not redundant to other similar
tests. The implementation itself is equivalent.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend the section which describes how to get a commit summary to show
how do to that with "git show", currently the documentation only shows
how to do that with gitk.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default location "~/.git-credential-cache/socket" for the
socket used to communicate with the credential-cache daemon has
been moved to "~/.cache/git/credential/socket".
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: add tests for XDG functionality
credential-cache: use XDG_CACHE_HOME for socket
path.c: add xdg_cache_home
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* ab/doc-no-option-notation-fix:
doc: change erroneous --[no]-whatever into --[no-]whatever
|
|
Doc fix.
* ab/push-default-doc-fix:
push: mention "push.default=tracking" in the documentation
|
|
Doc fix.
* nd/commit-hook-doc-fix:
git-commit.txt: list post-rewrite in HOOKS section
|
|
Reflow the recently changed branch/tag-for-each-ref
documentation. This change shows no changes under --word-diff, except
the innocuous change of moving git-tag.txt's "[--sort=<key>]" around
slightly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the --points-at option to default to HEAD for consistency with
its siblings --contains, --merged etc. which default to
HEAD. Previously we'd get:
$ git tag --points-at 2>&1 | head -n 1
error: option `points-at' requires a value
This changes behavior added in commit ae7706b9ac (tag: add --points-at
list option, 2012-02-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "tag" command to implicitly turn on its --list mode when
provided with a list-like option such as --contains, --points-at etc.
This is for consistency with how "branch" works. When "branch" is
given a list-like option, such as --contains, it implicitly provides
--list. Before this change "tag" would error out on those sorts of
invocations. I.e. while both of these worked for "branch":
git branch --contains v2.8.0 <pattern>
git branch --list --contains v2.8.0 <pattern>
Only the latter form worked for "tag":
git tag --contains v2.8.0 '*rc*'
git tag --list --contains v2.8.0 '*rc*'
Now "tag", like "branch", will implicitly supply --list when a
list-like option is provided, and no other conflicting non-list
options (such as -d) are present on the command-line.
Spelunking through the history via:
git log --reverse -p -G'only allowed with' -- '*builtin*tag*c'
Reveals that there was no good reason for not allowing this in the
first place. The --contains option added in 32c35cfb1e ("git-tag: Add
--contains option", 2009-01-26) made this an error. All the other
subsequent list-like options that were added copied its pattern of
making this usage an error.
The only tests that break as a result of this change are tests that
were explicitly checking that this "branch-like" usage wasn't
permitted. Change those failing tests to check that this invocation
mode is permitted, add extra tests for the list-like options we
weren't testing, and tests to ensure that e.g. we don't toggle the
list mode in the presence of other conflicting non-list options.
With this change errors messages such as "--contains option is only
allowed with -l" don't make sense anymore, since options like
--contain turn on -l. Instead we error out when list-like options such
as --contain are used in conjunction with conflicting options such as
-d or -v.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the documentation for --list so that it's described as a
toggle, not as an option that takes a <pattern> as an argument.
Junio initially documented this in b867c7c23a ("git-tag: -l to list
tags (usability).", 2006-02-17), but later Jeff King changed "tag" to
accept multiple patterns in 588d0e834b ("tag: accept multiple patterns
for --list", 2011-06-20).
However, documenting this as "-l <pattern>" was never correct, as
these both worked before Jeff's change:
git tag -l 'v*'
git tag 'v*' -l
One would expect an option that was documented like that to only
accept:
git tag --list
git tag --list 'v*rc*'
And after Jeff's change, one that took multiple patterns:
git tag --list 'v*rc*' --list '*2.8*'
But since it's actually a toggle all of these work as well, and
produce identical output to the last example above:
git tag --list 'v*rc*' '*2.8*'
git tag --list 'v*rc*' '*2.8*' --list --list --list
git tag --list 'v*rc*' '*2.8*' --list -l --list -l --list
Now the documentation is more in tune with how the "branch" command
describes its --list option since commit cddd127b9a ("branch:
introduce --list option", 2011-08-28).
Change the test suite to assert that these invocations work for the
cases that weren't already being tested for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The paragraph begins with a sample command line `git branch <name>`
that has nothing to do with the option being described. Remove it,
but use the space to instead show that multiple patterns can be
given.
Also mention the unfortunate `-l` that can be easily confused with
it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Johannes Schindelin
Junio C Hamano
Kyle Meyer
Andreas Heiduk
Quentin Pradet
Mostyn Bramley-Moore
brian m. carlson
Stefan Beller
Ævar Arnfjörð Bjarmason