| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
|
|
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
|
|
`git worktree list` now annotates worktrees as prunable, shows
locked and prunable attributes in --porcelain mode, and gained
a --verbose option.
* rs/worktree-list-verbose:
worktree: teach `list` verbose mode
worktree: teach `list` to annotate prunable worktree
worktree: teach `list --porcelain` to annotate locked worktree
t2402: ensure locked worktree is properly cleaned up
worktree: teach worktree_lock_reason() to gently handle main worktree
worktree: teach worktree to lazy-load "prunable" reason
worktree: libify should_prune_worktree()
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* ma/doc-pack-format-varint-for-sizes:
pack-format.txt: document sizes at start of delta data
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
|
|
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
|
|
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix for packfile URI feature.
* jt/packfile-as-uri-doc:
Doc: clarify contents of packfile sent as URI
|
|
Documentation for "git fsck" lost stale bits that has become
incorrect.
* ab/fsck-doc-fix:
fsck doc: remove ancient out-of-date diagnostics
|
|
Doc update.
* tb/local-clone-race-doc:
Documentation/git-clone.txt: document race with --local
|
|
Doc update.
* bc/doc-status-short:
docs: rephrase and clarify the git status --short format
|
|
Doc update.
* ug/doc-lose-dircache:
doc: remove "directory cache" from man pages
|
|
Doc update.
* vv/send-email-with-less-secure-apps-access:
git-send-email.txt: mention less secure app access with Gmail
|
|
Doc update.
* jc/sign-off:
SubmittingPatches: tighten wording on "sign-off" procedure
|
|
Doc fix.
* pb/doc-modules-git-work-tree-typofix:
gitmodules.txt: fix 'GIT_WORK_TREE' variable name
|
|
|
|
Doc fix for packfile URI feature.
* jt/packfile-as-uri-doc:
Doc: clarify contents of packfile sent as URI
|
|
Documentation for "git fsck" lost stale bits that has become
incorrect.
* ab/fsck-doc-fix:
fsck doc: remove ancient out-of-date diagnostics
|
|
The description for "-c" is hard to parse. I think the big issue is lack
of commas, but I've also reordered the words to keep the main focus
point of "instead of renaming, copy" together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the pack.writeReverseIndex configuration is respected in both
'git index-pack' and 'git pack-objects' (and therefore, all of their
callers), we can safely advertise it for use in the git-config manual.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach 'git index-pack' to optionally write and verify reverse index with
'--[no-]rev-index', as well as respecting the 'pack.writeReverseIndex'
configuration option.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Specify the format of the on-disk reverse index 'pack-*.rev' file, as
well as prepare the code for the existence of such files.
The reverse index maps from pack relative positions (i.e., an index into
the array of object which is sorted by their offsets within the
packfile) to their position within the 'pack-*.idx' file. Today, this is
done by building up a list of (off_t, uint32_t) tuples for each object
(the off_t corresponding to that object's offset, and the uint32_t
corresponding to its position in the index). To convert between pack and
index position quickly, this array of tuples is radix sorted based on
its offset.
This has two major drawbacks:
First, the in-memory cost scales linearly with the number of objects in
a pack. Each 'struct revindex_entry' is sizeof(off_t) +
sizeof(uint32_t) + padding bytes for a total of 16.
To observe this, force Git to load the reverse index by, for e.g.,
running 'git cat-file --batch-check="%(objectsize:disk)"'. When asking
for a single object in a fresh clone of the kernel, Git needs to
allocate 120+ MB of memory in order to hold the reverse index in memory.
Second, the cost to sort also scales with the size of the pack.
Luckily, this is a linear function since 'load_pack_revindex()' uses a
radix sort, but this cost still must be paid once per pack per process.
As an example, it takes ~60x longer to print the _size_ of an object as
it does to print that entire object's _contents_:
Benchmark #1: git.compile cat-file --batch <obj
Time (mean ± σ): 3.4 ms ± 0.1 ms [User: 3.3 ms, System: 2.1 ms]
Range (min … max): 3.2 ms … 3.7 ms 726 runs
Benchmark #2: git.compile cat-file --batch-check="%(objectsize:disk)" <obj
Time (mean ± σ): 210.3 ms ± 8.9 ms [User: 188.2 ms, System: 23.2 ms]
Range (min … max): 193.7 ms … 224.4 ms 13 runs
Instead, avoid computing and sorting the revindex once per process by
writing it to a file when the pack itself is generated.
The format is relatively straightforward. It contains an array of
uint32_t's, the length of which is equal to the number of objects in the
pack. The ith entry in this table contains the index position of the
ith object in the pack, where "ith object in the pack" is determined by
pack offset.
One thing that the on-disk format does _not_ contain is the full (up to)
eight-byte offset corresponding to each object. This is something that
the in-memory revindex contains (it stores an off_t in 'struct
revindex_entry' along with the same uint32_t that the on-disk format
has). Omit it in the on-disk format, since knowing the index position
for some object is sufficient to get a constant-time lookup in the
pack-*.idx file to ask for an object's offset within the pack.
This trades off between the on-disk size of the 'pack-*.rev' file for
runtime to chase down the offset for some object. Even though the lookup
is constant time, the constant is heavier, since it can potentially
involve two pointer walks in v2 indexes (one to access the 4-byte offset
table, and potentially a second to access the double wide offset table).
Consider trying to map an object's pack offset to a relative position
within that pack. In a cold-cache scenario, more page faults occur while
switching between binary searching through the reverse index and
searching through the *.idx file for an object's offset. Sure enough,
with a cold cache (writing '3' into '/proc/sys/vm/drop_caches' after
'sync'ing), printing out the entire object's contents is still
marginally faster than printing its size:
Benchmark #1: git.compile cat-file --batch-check="%(objectsize:disk)" <obj >/dev/null
Time (mean ± σ): 22.6 ms ± 0.5 ms [User: 2.4 ms, System: 7.9 ms]
Range (min … max): 21.4 ms … 23.5 ms 41 runs
Benchmark #2: git.compile cat-file --batch <obj >/dev/null
Time (mean ± σ): 17.2 ms ± 0.7 ms [User: 2.8 ms, System: 5.5 ms]
Range (min … max): 15.6 ms … 18.2 ms 45 runs
(Numbers taken in the kernel after cheating and using the next patch to
generate a reverse index). There are a couple of approaches to improve
cold cache performance not pursued here:
- We could include the object offsets in the reverse index format.
Predictably, this does result in fewer page faults, but it triples
the size of the file, while simultaneously duplicating a ton of data
already available in the .idx file. (This was the original way I
implemented the format, and it did show
`--batch-check='%(objectsize:disk)'` winning out against `--batch`.)
On the other hand, this increase in size also results in a large
block-cache footprint, which could potentially hurt other workloads.
- We could store the mapping from pack to index position in more
cache-friendly way, like constructing a binary search tree from the
table and writing the values in breadth-first order. This would
result in much better locality, but the price you pay is trading
O(1) lookup in 'pack_pos_to_index()' for an O(log n) one (since you
can no longer directly index the table).
So, neither of these approaches are taken here. (Thankfully, the format
is versioned, so we are free to pursue these in the future.) But, cold
cache performance likely isn't interesting outside of one-off cases like
asking for the size of an object directly. In real-world usage, Git is
often performing many operations in the revindex (i.e., asking about
many objects rather than a single one).
The trade-off is worth it, since we will avoid the vast majority of the
cost of generating the revindex that the extra pointer chase will look
like noise in the following patch's benchmarks.
This patch describes the format and prepares callers (like in
pack-revindex.c) to be able to read *.rev files once they exist. An
implementation of the writer will appear in the next patch, and callers
will gradually begin to start using the writer in the patches that
follow after that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow-up fixes and improvements to ab/mailmap topic.
* ab/mailmap-fixup:
t4203: make blame output massaging more robust
mailmap doc: use correct environment variable 'GIT_WORK_TREE'
t4203: stop losing return codes of git commands
test-lib-functions.sh: fix usage for test_commit()
|
|
Introduce two new ways to feed configuration variable-value pairs
via environment variables, and tweak the way GIT_CONFIG_PARAMETERS
encodes variable/value pairs to make it more robust.
* ps/config-env-pairs:
config: allow specifying config entries via envvar pairs
environment: make `getenv_safe()` a public function
config: store "git -c" variables using more robust format
config: parse more robust format in GIT_CONFIG_PARAMETERS
config: extract function to parse config pairs
quote: make sq_dequote_step() a public function
config: add new way to pass config via `--config-env`
git: add `--super-prefix` to usage string
|
|
Clean-up docs, codepaths and tests around mailmap.
* ab/mailmap: (22 commits)
shortlog: remove unused(?) "repo-abbrev" feature
mailmap doc + tests: document and test for case-insensitivity
mailmap tests: add tests for empty "<>" syntax
mailmap tests: add tests for whitespace syntax
mailmap tests: add a test for comment syntax
mailmap doc + tests: add better examples & test them
tests: refactor a few tests to use "test_commit --append"
test-lib functions: add an --append option to test_commit
test-lib functions: add --author support to test_commit
test-lib functions: document arguments to test_commit
test-lib functions: expand "test_commit" comment template
mailmap: test for silent exiting on missing file/blob
mailmap tests: get rid of overly complex blame fuzzing
mailmap tests: add a test for "not a blob" error
mailmap tests: remove redundant entry in test
mailmap tests: improve --stdin tests
mailmap tests: modernize syntax & test idioms
mailmap tests: use our preferred whitespace syntax
mailmap doc: start by mentioning the comment syntax
check-mailmap doc: note config options
...
|
|
"git fetch" learns to treat ref updates atomically in all-or-none
fashion, just like "git push" does, with the new "--atomic" option.
* ps/fetch-atomic:
fetch: implement support for atomic reference updates
fetch: allow passing a transaction to `s_update_ref()`
fetch: refactor `s_update_ref` to use common exit path
fetch: use strbuf to format FETCH_HEAD updates
fetch: extract writing to FETCH_HEAD
|
|
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
|
|
"git mktag" validates its input using its own rules before writing
a tag object---it has been updated to share the logic with "git
fsck".
* ab/mktag: (23 commits)
mktag: add a --[no-]strict option
mktag: mark strings for translation
mktag: convert to parse-options
mktag: allow omitting the header/body \n separator
mktag: allow turning off fsck.extraHeaderEntry
fsck: make fsck_config() re-usable
mktag: use fsck instead of custom verify_tag()
mktag: use puts(str) instead of printf("%s\n", str)
mktag: remove redundant braces in one-line body "if"
mktag: use default strbuf_read() hint
mktag tests: test verify_object() with replaced objects
mktag tests: improve verify_object() test coverage
mktag tests: test "hash-object" compatibility
mktag tests: stress test whitespace handling
mktag tests: run "fsck" after creating "mytag"
mktag tests: don't create "mytag" twice
mktag tests: don't redirect stderr to a file needlessly
mktag tests: remove needless SHA-1 hardcoding
mktag tests: use "test_commit" helper
mktag tests: don't needlessly use a subshell
...
|
|
During a merge conflict, the name of a file may appear multiple
times in "git ls-files" output, once for each stage. If you use
both `--delete` and `--modify` at the same time, the output may
mention a deleted file twice.
When none of the '-t', '-u', or '-s' options is in use, these
duplicate entries do not add much value to the output.
Introduce a new '--deduplicate' option to suppress them.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
[jc: extended doc and rewritten commit log]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This removes the ability to inject "poison" gettext() messages via the
GIT_TEST_GETTEXT_POISON special test setup.
I initially added this as a compile-time option in bb946bba761 (i18n:
add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and
most recently modified to be toggleable at runtime in
6cdccfce1e0 (i18n: make GETTEXT_POISON a runtime option, 2018-11-08)..
The reason for its removal is that the trade-off of maintaining it
v.s. what it's getting us has long since flipped. When gettext was
integrated in 5e9637c6297 (i18n: add infrastructure for translating
Git with gettext, 2011-11-18) there was understandable concern on the
Git ML that in marking messages for translation en-masse we'd
inadvertently mark plumbing messages. The GETTEXT_POISON facility was
a way to smoke those out via our test suite.
Nowadays however we're done (or almost entirely done) with any marking
of messages for translation. New messages are usually marked by their
authors, who'll know whether it makes sense to translate them or
not. If not any errors in marking the messages are much more likely to
be spotted in review than in the the initial deluge of i18n patches in
the 2011-2012 era.
So let's just remove this. This leaves the test suite in a state where
we still have a lot of test_i18n, C_LOCALE_OUTPUT
etc. uses. Subsequent commits will remove those too.
The change to t/lib-rebase.sh is a selective revert of the relevant
part of f2d17068fd (i18n: rebase-interactive: mark comments of squash
for translation, 2016-06-17), and the comment in
t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark
messages for translation, 2012-07-25).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove diagnostics that haven't been emitted by "fsck" or its
predecessors for around 15 years. This documentation was added in
c64b9b88605 (Reference documentation for the core git commands.,
2005-05-05), but was out-of-date quickly after that.
Notes on individual diagnostics:
- "expect dangling commits": Added in bcee6fd8e71 (Make 'fsck' able
to[...], 2005-04-13), documented in c64b9b88605. Not emitted since
1024932f019 (fsck-cache: walk the 'refs' directory[...],
2005-05-18).
- "missing sha1 directory": Added in 20222118ae4 (Add first cut at
"fsck-cache"[...], 2005-04-08), documented in c64b9b88605. Not
emitted since 230f13225df (Create object subdirectories on demand,
2005-10-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify that, when the packfile-uri feature is used, the client should
not assume that the extra packfiles downloaded would only contain a
single blob, but support packfiles containing multiple objects of all
types.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The end of the cache tree index extension format trails off with
ellipses ever since 23fcc98 (doc: technical details about the index
file format, 2011-03-01). While an intuitive reader could gather what
this means, it could be better to use "and so on" instead.
Really, this is only justified because I also wanted to point out that
the number of subtrees in the index format is used to determine when the
recursive depth-first-search stack should be "popped." This should help
to add clarity to the format.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I had difficulty in my efforts to learn about the cache tree extension
based on the documentation and code because I had an incorrect
assumption about how it behaved. This might be due to some ambiguity in
the documentation, so this change modifies the beginning of the cache
tree format by expanding the description of the feature.
My hope is that this documentation clarifies a few things:
1. There is an in-memory recursive tree structure that is constructed
from the extension data. This structure has a few differences, such
as where the name is stored.
2. What does it mean for an entry to be invalid?
3. When exactly are "new" trees created?
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index has a "cache tree" extension. This corresponds to a
significant API implemented in cache-tree.[ch]. However, there are a few
places that refer to this erroneously as "cached tree". These are rare,
but notably the index-format.txt file itself makes this error.
The only other reference is in t7104-reset-hard.sh.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* tb/local-clone-race-doc:
Documentation/git-clone.txt: document race with --local
|
|
Doc update.
* bc/doc-status-short:
docs: rephrase and clarify the git status --short format
|
Junio C Hamano
Jeff King
Rafael Silva
Taylor Blau
ZheNing Hu
Ævar Arnfjörð Bjarmason
Jonathan Tan
Derrick Stolee