| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jg/cguide-we-cannot-count:
CodingGuidelines: update 'rough' rule count
|
|
Documentation update.
* jk/pack-corruption-post-mortem:
howto: document more tools for recovery corruption
|
|
Documentation update.
* jn/doc-fast-import-no-16-octopus-limit:
fast-import doc: remove suggested 16-parent limit
|
|
Changed inaccurate count of "rough rules" from three to the more
generic 'a few'.
Signed-off-by: Julian Gindi <juliangindi@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Long ago, I documented a corruption recovery I did and gave
some C code that I used to help find a flipped bit. I had
to fix a similar case recently, and I ended up writing a few
more tools. I hope nobody ever has to use these, but it
does not hurt to share them, just in case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Merges with an absurd number of parents are still a bad idea because
they do not render well in tools like gitk, but if they are present
in the repository being imported into git then there's no need to
avoid reproducing them faithfully.
In olden times, before v1.6.0-rc0~194 (2008-06-27), git commit-tree
and higher-level tools built on top of it were limited to writing 16
parents for a commit. Nowadays normal git operations are happy to
write more parents when asked, so the motivation for this note in the
fast-import documentation is gone and we can remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ss/pull-rebase-preserve:
docs: clarify what git-rebase's "-p" / "--preserve-merges" does
docs: clarify "preserve" option wording for git-pull
|
|
* ph/push-doc-cas:
git-push.txt: clean up force-with-lease wording
|
|
Ignoring a merge can be read as ignoring the changes a merge commit
introduces altogether, as if the entire side branch the merge commit
merged was removed from the history. But that is not what happens
if "-p" is not specified. What happens is that the individual
commits a merge commit introduces are replayed in order, and only
any possible merge conflict resolutions or manual amendments to the
merge commit are ignored.
Get this straight in the docs.
Also, do not say that merge commits are *tried* to be recreated. As that is
true almost everywhere it is better left unsaid.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc clean-up.
* nd/doc-git-index-version:
git.txt: list index versions in plain English
|
|
Recommend format-patch and send-email for those who want to submit
patches to this project.
* jc/submitting-patches-mention-send-email:
SubmittingPatches: encourage users to use format-patch and send-email
|
|
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
|
|
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "also" sounds as if "preserve" does a rebase as an additional
step that "true" would not do, but that is not the case. Clarify
this by omitting "also", and rewording the sentence a bit.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The help text for the --force-with-lease option to git-push
does not parse cleanly. Clean up the wording and syntax to
be more sensible. Also remove redundant information in the
"--force-with-lease alone" description.
Signed-off-by: Phil Hord <hordp@cisco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the first look, a user may think the default version is "23". Even
with UNIX background, there's no reference anywhere close that may
indicate this is glob or regex.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation fixes.
* mg/doc-status-color-slot:
config,completion: add color.status.unmerged
|
|
"git log --decorate" did not reset colors correctly around the
branch names.
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
|
|
"git imap-send" learned to optionally talk with an IMAP server via
libcURL; because there is no other option when Git is built with
NO_OPENSSL option, use that codepath by default under such
configuration.
* km/imap-send-libcurl-options:
imap-send: use cURL automatically when NO_OPENSSL defined
|
|
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In step "(4) Sending your patches", we instruct users to do an
inline patch, avoid breaking whitespaces, avoid attachments, use
[PATCH v2] for second round, etc., all of which format-patch and
send-email combo know how to do well.
The need was identified by, and the text is based on the work by
Cody Taylor.
Suggested-by: Cody Taylor <cody.taylor@maternityneighborhood.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation update.
* mr/doc-clean-f-f:
Documentation/git-clean.txt: document that -f may need to be given twice
|
|
"git remote add" mentioned "--tags" and "--no-tags" and was not
clear that fetch from the remote in the future will use the default
behaviour when neither is given to override it.
* mg/doc-remote-tags-or-not:
git-remote.txt: describe behavior without --tags and --no-tags
|
|
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
|
|
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
|
|
Reported-by: "Mladen B." <mladen074@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If both USE_CURL_FOR_IMAP_SEND and NO_OPENSSL are defined do
not force the user to add --curl to get a working git imap-send
command.
Instead automatically select --curl and warn and ignore the
--no-curl option. And while we're in there, correct the
warning message when --curl is requested but not supported.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
|
|
|
|
Longstanding configuration variable naming rules has been added to
the documentation.
* jc/conf-var-doc:
CodingGuidelines: describe naming rules for configuration variables
config.txt: mark deprecated variables more prominently
config.txt: clarify that add.ignore-errors is deprecated
|
|
Clarify in the documentation that "remote.<nick>.pushURL" and
"remote.<nick>.URL" are there to name the same repository accessed
via different transports, not two separate repositories.
* jc/remote-set-url-doc:
Documentation/git-remote.txt: stress that set-url is not for triangular
|
|
In "git log --decorate", you would see the commit header like this:
commit ... (HEAD, jc/decorate-leaky-separator-color)
where "commit ... (" is painted in color.diff.commit, "HEAD" in
color.decorate.head, ", " in color.diff.commit, the branch name in
color.decorate.branch and then closing ")" in color.diff.commit.
If you wanted to paint the HEAD and local branch name in the same
color as the body text (perhaps because cyan and green are too faint
on a black-on-white terminal to be readable), you would not want to
have to say
[color "decorate"]
head = black
branch = black
because that you would not be able to reuse same configuration on a
white-on-black terminal. You would naively expect
[color "decorate"]
head = normal
branch = normal
to work, but unfortunately it does not. It paints the string "HEAD"
and the branch name in the same color as the opening parenthesis or
comma between the decoration elements. This is because the code
forgets to reset the color after printing the "prefix" in its own
color.
It theoretically is possible that some people were expecting and
relying on that the attribute set as the "diff.commit" color, which
is used to draw these opening parenthesis and inter-item comma, is
inherited by the drawing of branch names, but it is not how the
coloring works everywhere else.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'true' short-hand doesn't deserve a separate sentence; even our own
git config --bool foo.bar yes
would not produce it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of describing it for color.branch.<slot> and have everybody
else refer to it, explain how colors are spelled in "Values" section
upfront.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The various types of values set to the configuration variables
deserve more than a brief footnote mention in the syntax section,
and it will be more so after the later steps of this clean up
effort.
Move the mention of booleans from the syntax section to this new
section, and describe how human-readble integers can be spelled with
scaling there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A line can be continued via a backquote-LF and can be chomped at a
comment character. But that is not specific to string-typed values.
It is common to all, just like unquoted leading and trailing
whitespaces are stripped and inter-word spacing are retained.
Move the description around and desribe these structural rules
first, then introduce the double-quote facility as a way to override
them, and finally mention various types of values.
Note that these structural rules only apply to the value part of the
configuration file. E.g.
[aSection] \
name \
= value
does not work, because the rules kick in only after seeing "name =".
Both the original and the updated text are phrased in an awkward way
by singling out the "value" part of the line because of this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The syntax section repeats what the preamble explained already.
That a variable can have multiple values is more about what a
variable is than the syntax of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Section names and variable names are both case-insensitive, but one
is described as "not case sensitive". Use "case-insensitive" for
both.
Instead of saying "... have to be escaped" without telling what that
escaping achieves, state it in a more positive way, i.e. "... can be
included by escaping".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation of 'git submodule update' has several problems:
1) It mentions that value 'none' of submodule.$name.update can be
overridden by --checkout, but other combinations of configuration
values and command line options are not mentioned.
2) The documentation of submodule.$name.update is scattered across three
places, which is confusing.
3) The documentation of submodule.$name.update in gitmodules.txt is
incorrect, because the code always uses the value from .git/config
and never from .gitmodules.
4) Documentation of --force was incomplete, because it is only effective
in case of checkout method of update.
Fix all these problems by documenting submodule.*.update in
git-submodule.txt and make everybody else refer to it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is needed in build automation where the tree really needs to
be reset to known state.
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --help" used to show rev-list options that are irrelevant
to the "log" command.
* jc/doc-log-rev-list-options:
Documentation: what does "git log --indexed-objects" even mean?
|
|
The documentation incorrectly said that C(opy) and R(ename) are the
only ones that can be followed by the score number in the output in
the --raw format.
* jc/diff-format-doc:
diff-format doc: a score can follow M for rewrite
|
|
The "git push" documentation made the "--repo=<there>" option
easily misunderstood.
* mg/push-repo-option-doc:
git-push.txt: document the behavior of --repo
|
Junio C Hamano
Julian Gindi
Jeff King
Jonathan Nieder
Sebastian Schuberth
Thomas Ackermann
Phil Hord
Nguyễn Thái Ngọc Duy
Michael J Gruber
Kyle J. McKay
Michal Sojka
Mikko Rapeli