| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "git p4" to send large blobs outside the repository by
talking to Git LFS.
* ls/p4-lfs:
git-p4: add Git LFS backend for large file system
git-p4: add support for large file systems
git-p4: check free space during streaming
git-p4: add file streaming progress in verbose mode
git-p4: return an empty list if a list config has no values
git-p4: add gitConfigInt reader
git-p4: add optional type specifier to gitConfig reader
|
|
* tk/doc-interpret-trailers-grammo:
Documentation/interpret-trailers: Grammar fix
|
|
Description of the "log.follow" configuration variable in "git log"
documentation is now also copied to "git config" documentation.
* dt/log-follow-config:
log: Update log.follow doc and add to config.txt
|
|
Update "git branch" that list existing branches, using the
ref-filter API that is shared with "git tag" and "git
for-each-ref".
* kn/for-each-branch:
branch: add '--points-at' option
branch.c: use 'ref-filter' APIs
branch.c: use 'ref-filter' data structures
branch: drop non-commit error reporting
branch: move 'current' check down to the presentation layer
branch: roll show_detached HEAD into regular ref_list
branch: bump get_head_description() to the top
branch: refactor width computation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/ls-remote-does-not-have-u-option:
ls-remote.txt: delete unsupported option
|
|
* jk/asciidoctor-section-heading-markup-fix:
Documentation: fix section header mark-up
|
|
The way how --ref/--notes to specify the notes tree reference are
DWIMmed was not clearly documented.
* jk/notes-dwim-doc:
notes: correct documentation of DWIMery for notes references
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git p4" learned to reencode the pathname it uses to communicate
with the p4 depot with a new option.
* ls/p4-path-encoding:
git-p4: use replacement character for non UTF-8 characters in paths
git-p4: improve path encoding verbose output
git-p4: add config git-p4.pathEncoding
|
|
Allow a later "!/abc/def" to override an earlier "/abc" that
appears in the same .gitignore file to make it easier to express
"everything in /abc directory is ignored, except for ...".
* nd/ignore-then-not-ignore:
dir.c: don't exclude whole dir prematurely if neg pattern may match
dir.c: make last_exclude_matching_from_list() run til the end
|
|
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation/config.txt does not include the documentation for
log.follow that is in Documentation/git-log.txt. This commit adds the
log.follow documentation to config.txt and also updates the wording to
be consistent with the format that is followed by other boolean
configuration variables.
Signed-off-by: Eric N. Vander Weele <ericvw@gmail.com>
Acked-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Very small number of options take a parameter that is optional
(which is not a great UI element as they can only appear at the end
of the command line). Add notice to documentation of each and
every one of them.
* mm/keyid-docs:
Documentation: explain optional arguments better
Documentation/grep: fix documentation of -O
Documentation: use 'keyid' consistently, not 'key-id'
|
|
"git remote" learned "get-url" subcommand to show the URL for a
given remote name used for fetching and pushing.
* bb/remote-get-url:
remote: add get-url subcommand
|
|
There was no way to defeat a configured rebase.autostash variable
from the command line, as "git rebase --no-autostash" was missing.
* jk/rebase-no-autostash:
Documentation/git-rebase: fix --no-autostash formatting
rebase: support --no-autostash
|
|
The "ref-filter" code was taught about many parts of what "tag -l"
does and then "tag -l" is being reimplemented in terms of "ref-filter".
* kn/for-each-tag:
tag.c: implement '--merged' and '--no-merged' options
tag.c: implement '--format' option
tag.c: use 'ref-filter' APIs
tag.c: use 'ref-filter' data structures
ref-filter: add option to match literal pattern
ref-filter: add support to sort by version
ref-filter: add support for %(contents:lines=X)
ref-filter: add option to filter out tags, branches and remotes
ref-filter: implement an `align` atom
ref-filter: introduce match_atom_name()
ref-filter: introduce handler function for each atom
utf8: add function to align a string into given strbuf
ref-filter: introduce ref_formatting_state and ref_formatting_stack
ref-filter: move `struct atom_value` to ref-filter.c
strtoul_ui: reject negative values
|
|
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
|
|
Move the refs used during a "git bisect" session to per-worktree
hierarchy refs/worktree/* so that independent bisect sessions can
be done in different worktrees.
* dt/refs-bisection:
refs: make refs/bisect/* per-worktree
path: optimize common dir checking
refs: clean up common_list
|
|
Users who are too busy to type three extra keystrokes to ask for
"git stash show -p" can now set stash.showPatch configuration
varible to true to always see the actual patch, not just the list
of paths affected with feel for the extent of damage via diffstat.
* nk/stash-show-config:
stash: allow "stash show" diff output configurable
|
|
"quiltimport" allows to specify the series file by honoring the
$QUILT_SERIES environment and also --series command line option.
* jh/quiltimport-explicit-series-file:
git-quiltimport: add commandline option --series <file>
|
|
The use of 'good/bad' in "git bisect" made it confusing to use when
hunting for a state change that is not a regression (e.g. bugfix).
The command learned 'old/new' and then allows the end user to
say e.g. "bisect start --term-old=fast --term=new=slow" to find a
performance regression.
Michael's idea to make 'good/bad' more intelligent does have
certain attractiveness ($gname/272867), and makes some of the work
on this topic a moot point.
* ad/bisect-terms:
bisect: allow setting any user-specified in 'git bisect start'
bisect: add 'git bisect terms' to view the current terms
bisect: add the terms old/new
bisect: sanity check on terms
|
|
Some features from "git tag -l" and "git branch -l" have been made
available to "git for-each-ref" so that eventually the unified
implementation can be shared across all three, in a follow-up
series or two.
* kn/for-each-tag-branch:
for-each-ref: add '--contains' option
ref-filter: implement '--contains' option
parse-options.h: add macros for '--contains' option
parse-option: rename parse_opt_with_commit()
for-each-ref: add '--merged' and '--no-merged' options
ref-filter: implement '--merged' and '--no-merged' options
ref-filter: add parse_opt_merge_filter()
for-each-ref: add '--points-at' option
ref-filter: implement '--points-at' option
tag: libify parse_opt_points_at()
t6302: for-each-ref tests for ref-filter APIs
|
|
Perforce repositories can contain large (binary) files. Migrating these
repositories to Git generates very large local clones. External storage
systems such as Git LFS [1], Git Fat [2], Git Media [3], git-annex [4]
try to address this problem.
Add a generic mechanism to detect large files based on extension,
uncompressed size, and/or compressed size.
[1] https://git-lfs.github.com/
[2] https://github.com/jedbrown/git-fat
[3] https://github.com/alebedev/git-media
[4] https://git-annex.branchable.com/
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Conflicts:
Documentation/git-p4.txt
git-p4.py
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
-u <exec> has never been supported, but it was mentioned since
0a2bb55 (git ls-remote: make usage string match manpage -
2008-11-11). Nobody has complained about it for seven years, it's
probably safe to say nobody cares. So let's remove "-u" in documents
instead of adding code to support it.
While at there, fix --upload-pack syntax too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, libcurl would follow redirection to any protocol
it was compiled for support with. This is desirable to allow
redirection from HTTP to HTTPS. However, it would even
successfully allow redirection from HTTP to SFTP, a protocol
that git does not otherwise support at all. Furthermore
git's new protocol-whitelisting could be bypassed by
following a redirect within the remote helper, as it was
only enforced at transport selection time.
This patch limits redirects within libcurl to HTTP, HTTPS,
FTP and FTPS. If there is a protocol-whitelist present, this
list is limited to those also allowed by the whitelist. As
redirection happens from within libcurl, it is impossible
for an HTTP redirect to a protocol implemented within
another remote helper.
When the curl version git was compiled with is too old to
support restrictions on protocol redirection, we warn the
user if GIT_ALLOW_PROTOCOL restrictions were requested. This
is a little inaccurate, as even without that variable in the
environment, we would still restrict SFTP, etc, and we do
not warn in that case. But anything else means we would
literally warn every time git accesses an http remote.
This commit includes a test, but it is not as robust as we
would hope. It redirects an http request to ftp, and checks
that curl complained about the protocol, which means that we
are relying on curl's specific error message to know what
happened. Ideally we would redirect to a working ftp server
and confirm that we can clone without protocol restrictions,
and not with them. But we do not have a portable way of
providing an ftp server, nor any other protocol that curl
supports (https is the closest, but we would have to deal
with certificates).
[jk: added test and version warning]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Asciidoctor is stricter than AsciiDoc when deciding if underlining
is a section title or the start of preformatted text. Make the
length of the underlining match the text to ensure that it renders
correctly in all implementations.
Signed-off-by: John Keeping <john@keeping.me.uk>
[jc: squashed in git-bisect one noticed by Michael J Gruber]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the '--points-at' option provided by 'ref-filter'. The option lets
the user to list only branches which points at the given object.
Add documentation and tests for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make 'branch.c' use 'ref-filter' APIs for iterating through refs
sorting. This removes most of the code used in 'branch.c' replacing it
with calls to the 'ref-filter' library.
Make 'branch.c' use the 'filter_refs()' function provided by 'ref-filter'
to filter out tags based on the options set.
We provide a sorting option provided for 'branch.c' by using the
sorting options provided by 'ref-filter'. Also by default, we sort by
'refname'. Since 'HEAD' is alphabatically before 'refs/...' we end up
with an array consisting of the 'HEAD' ref then the local branches and
finally the remote-tracking branches.
Also remove the 'ignore' variable from ref_array_item as it was
previously used for the '--merged' option and now that is handled by
ref-filter.
Modify some of the tests in t1430 to check the stderr for a warning
regarding the broken ref. This is done as ref-filter throws a warning
for broken refs rather than directly printing them.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we are cloning an untrusted remote repository into a
sandbox, we may also want to fetch remote submodules in
order to get the complete view as intended by the other
side. However, that opens us up to attacks where a malicious
user gets us to clone something they would not otherwise
have access to (this is not necessarily a problem by itself,
but we may then act on the cloned contents in a way that
exposes them to the attacker).
Ideally such a setup would sandbox git entirely away from
high-value items, but this is not always practical or easy
to set up (e.g., OS network controls may block multiple
protocols, and we would want to enable some but not others).
We can help this case by providing a way to restrict
particular protocols. We use a whitelist in the environment.
This is more annoying to set up than a blacklist, but
defaults to safety if the set of protocols git supports
grows). If no whitelist is specified, we continue to default
to allowing all protocols (this is an "unsafe" default, but
since the minority of users will want this sandboxing
effect, it is the only sensible one).
A note on the tests: ideally these would all be in a single
test file, but the git-daemon and httpd test infrastructure
is an all-or-nothing proposition rather than a test-by-test
prerequisite. By putting them all together, we would be
unable to test the file-local code on machines without
apache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
expand_notes_ref is used by --ref from git-notes(1) and --notes from the
git log to find the full refname of a notes reference. Previously the
documentation of these options was not clear about what sorts of
expansions would be performed. Fix the documentation to clearly and
accurately describe the behavior of the expansions.
Add a test for this expansion when using git notes get-ref in order to
prevent future patches from changing this behavior.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If there is a pattern "!foo/bar", this patch makes it not exclude "foo"
right away. This gives us a chance to examine "foo" and re-include
"foo/bar".
In order for it to detect that the directory under examination should
not be excluded right away, in other words it is a parent directory of a
negative pattern, the "directory path" of the negative pattern must be
literal. Patterns like "!f?o/bar" can't stop "foo" from being excluded.
Basename matching (i.e. "no slashes in the pattern") or must-be-dir
matching (i.e. "trailing slash in the pattern") does not work well with
this. For example, if we descend in "foo" and are examining "foo/abc",
current code for "foo/" pattern will check if path "foo/abc", not "foo",
is a directory. The same problem with basename matching. These may need
big code reorg to make it work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the documentation of commands taking optional arguments in two
ways:
* Documents the behavior of '-O' (for grep) and '-S' (for commands
creating commits) when used without the optional argument.
* Document the syntax of these options.
For the second point, the behavior is documented in gitcli(7), but it is
easy for users to miss, and hard for the same user to understand why e.g.
"git status -u no" does not work.
Document this explicitly in the documentation of each short option having
an optional argument: they are the most error prone since there is no '='
sign between the option and its argument.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the argument of -O, --open-file-in-pager is optional, it must be
stuck to the command. Reflect this in the documentation.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 2.5.3
|
|
The branch descriptions that are set with "git branch --edit-description"
option were used in many places but they weren't clearly documented.
* po/doc-branch-desc:
doc: show usage of branch description
|
|
* as/config-doc-markup-fix:
Documentation/config: fix formatting for branch.*.rebase and pull.rebase
|
Junio C Hamano
Tobias Klauser
Eric N. Vander Weele
Lars Schneider
Nguyễn Thái Ngọc Duy
Blake Burkhart
John Keeping
Karthik Nayak
Jeff King
Jacob Keller
Matthieu Moy