Age | Commit message (Collapse) | Author | Files | Lines |
|
The highlighting was pretty, but unfortunately, the failure mode
when source-highlight is not installed was that the entire code
block disappears.
See https://bugs.debian.org/745591,
https://bugs.launchpad.net/bugs/1316810.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing hashtable implementation (in hash.[ch]) uses open addressing
(i.e. resolve hash collisions by distributing entries across the table).
Thus, removal is difficult to implement with less than O(n) complexity.
Resolving collisions of entries with identical hashes (e.g. via chaining)
is left to the client code.
Add a hashtable implementation that supports O(1) removal and is slightly
easier to use due to builtin entry chaining.
Supports all basic operations init, free, get, add, remove and iteration.
Also includes ready-to-use hash functions based on the public domain FNV-1
algorithm (http://www.isthe.com/chongo/tech/comp/fnv).
The per-entry data structure (hashmap_entry) is piggybacked in front of
the client's data structure to save memory. See test-hashmap.c for usage
examples.
The hashtable is resized by a factor of four when 80% full. With these
settings, average memory consumption is about 2/3 of hash.[ch], and
insertion is about twice as fast due to less frequent resizing.
Lookups are also slightly faster, because entries are strictly confined to
their bucket (i.e. no data of other buckets needs to be traversed).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
"git checkout [--detach] <commit>" was listed poorly in the
synopsis section of its documentation.
* jc/checkout-detach-doc:
checkout: update synopsys and documentation on detaching HEAD
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/upload-pack-keepalive:
upload-pack: bump keepalive default to 5 seconds
upload-pack: send keepalive packets during pack computation
|
|
List notable topics that graduated during Jonathan's interim
maintainership.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://git.bogomips.org/git-svn:
git-svn: Warn about changing default for --prefix in Git v2.0
Documentation/git-svn: Promote the use of --prefix in docs + examples
git-svn.txt: elaborate on rev_map files
git-svn.txt: replace .git with $GIT_DIR
git-svn.txt: reword description of gc command
git-svn.txt: fix AsciiDoc formatting error
git-svn: fix signed commit parsing
|
|
* maint:
git-prune-packed.txt: fix reference to GIT_OBJECT_DIRECTORY
clone --branch: refuse to clone if upstream repo is empty
|
|
git-prune-packed operates on GIT_OBJECT_DIRECTORY, not
GIT_OBJECT_DIR.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Labeled lists require a double colon.
[jc] I eyeballed the output from
git grep '[^:]:$' Documentation/\*.txt
and the patch fixes all breakages of this kind.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Thunderbird section of the 'MUA-specific hints' contains three
different approaches to setting up the mail client to leave patch
emails unmolested. The second approach (configuration) has a step
missing when configuring the composition window not to wrap. In
particular, the "mailnews.wraplength" configuration variable needs
to be set to zero. Update the documentation to add the missing
setting.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The style for multi-line comments is often mentioned and should be documented
for clarity.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* nv/doc-config-signingkey:
config doc: user.signingkey is also used for signed commits
|
|
The description of the user.signingkey option only mentioned its use
when creating a signed tag. Make it clear that is is also used when
creating signed commits.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* rj/doc-formatting-fix:
howto/revert-a-faulty-merge: fix unescaped '^'s
howto/setup-git-server-over-http: fix unescaped '^'s
|
|
* po/remote-set-head-usage:
remote set-head -h: add long options to synopsis
remote doc: document long forms of set-head options
|
|
Several uses of the '^' operator are being interpreted by asciidoc
as requests to show the following text as a superscript. In order
to fix this problem, use backticks (`) to quote the text of the
affected git command invocations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
The text contains two 'grep' invocations which include the 'start
of line' regular expression character '^'. Asciidoc mis-interprets
this use of '^' as a superscript request. In order to fix this
formatting problem, use backticks (`) to quote the text of the
affected 'grep' command invocations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
In Git v2.0, we will change the default --prefix for init/clone from
none/empty to "origin/" (which causes SVN-tracking branches to be
placed at refs/remotes/origin/* instead of refs/remotes/*).
This patch warns users about the upcoming change, both in the git-svn
manual page, and on stderr when running init/clone in the "multi-mode"
without providing a --prefix.
Cc: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Currently, the git-svn defaults to using an empty prefix, which ends
up placing the SVN-tracking refs directly in refs/remotes/*. This
placement runs counter to Git's convention of placing remote-tracking
branches in refs/remotes/$remote/*.
Furthermore, combining git-svn with "regular" Git remotes run the risk
of clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
At this time, the user is better off using the --prefix=foo/ (the
trailing slash is important) to git svn init/clone, to cause the
SVN-tracking refs to be placed at refs/remotes/foo/* instead of
refs/remotes/*. This patch updates the documentation to encourage
use of --prefix.
This is also in preparation for changing the default value of --prefix
at some point in the future.
Cc: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
The man page for `git svn` describes a situation in which "'git svn'
will not be able to rebuild" your $GIT_DIR/svn/**/.rev_map* files, but
no mention is made of in what circumstances `git svn` *will* be able to
do so, how to get `git svn` to do so, or even what these files are.
This patch adds a FILES section to the man page with a description of
what $GIT_DIR/svn/**/.rev_map* files are and how they are (re)built, and
links to this description from various other parts of the man page.
Signed-off-by: Keshav Kini <keshav.kini@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
As $GIT_DIR may not equal '.git', it's usually more generally correct to
refer to files in $GIT_DIR rather than in .git .
This will also allow me to link some of the occurrences of '.git' in
git-svn.txt to a new reference target inside this file in an upcoming
commit, because in AsciiDoc definitions apparently can't start with
a '.' character.
Signed-off-by: Keshav Kini <keshav.kini@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
It's redundant to say that $GIT_DIR/svn/<refname>/unhandled.log or
$GIT_DIR/svn/<refname>/index is in .git/svn when $GIT_DIR is '.git', and
is wrong when $GIT_DIR is not '.git'
Also, a '/' was missing from the pathname $GIT_DIR/svn/<refname>/index .
Signed-off-by: Keshav Kini <keshav.kini@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
As asterisks are used to indicate bold text in AsciiDoc, shell glob
expressions must be escaped appropriately.
Signed-off-by: Keshav Kini <keshav.kini@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
On my system this is in /usr/share/asciidoc/dblatex not
/etc/asciidoc/dblatex. Extract this portion of the path to a variable
so that is can be set in config.mak.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
[jn: with wording tweak from Keshav Kini]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
"git remote set-head" has always supported --add and --delete
as synonyms for the -a and -d option but forgot to document
them.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
|
|
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
* bc/submodule-status-ignored:
Improve documentation concerning the status.submodulesummary setting
submodule: don't print status output with ignore=all
submodule: fix confusing variable name
|
|
* cc/replace-with-the-same-type:
Doc: 'replace' merge and non-merge commits
t6050-replace: use some long option names
replace: allow long option names
Documentation/replace: add Creating Replacement Objects section
t6050-replace: add test to clean up all the replace refs
t6050-replace: test that objects are of the same type
Documentation/replace: state that objects must be of the same type
replace: forbid replacing an object with one of a different type
|
|
The id is already different for binary files. The hash used is an
implementation detail, so let's just document how diffs are compared.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running "fetch -q", a long silence while the sender side
computes the set of objects to send can be mistaken by proxies as
dropped connection. The server side has been taught to send a small
empty messages to keep the connection alive.
* jk/upload-pack-keepalive:
upload-pack: bump keepalive default to 5 seconds
upload-pack: send keepalive packets during pack computation
|
|
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
|
|
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
|
|
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
|
|
Just like "make -C <directory>", make "git -C <directory> ..." to
go there before doing anything else.
* nr/git-cd-to-a-directory:
t0056: "git -C" test updates
git: run in a directory given with -C option
|
|
Fix a minor regression in v1.8.3.2 and later that made it
impossible to base your local work on anything but a local branch
of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
|
|
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
|
|
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
|
|
* maint:
Start preparing for 1.8.4.1
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we converted many documents that were traditionally text-only
to be formatted to AsciiDoc, we did not update links that point at
them to refer to the formatted HTML files.
* ss/doclinks:
Documentation: make AsciiDoc links always point to HTML files
|