| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As established in the previous commit and commit b00bf1c9a8dd
(git-rebase: make --allow-empty-message the default, 2018-06-27), the
behavior for rebase with different backends in various edge or corner
cases is often more happenstance than design. This commit addresses
another such corner case: commits which "become empty".
A careful reader may note that there are two types of commits which would
become empty due to a rebase:
* [clean cherry-pick] Commits which are clean cherry-picks of upstream
commits, as determined by `git log --cherry-mark ...`. Re-applying
these commits would result in an empty set of changes and a
duplicative commit message; i.e. these are commits that have
"already been applied" upstream.
* [become empty] Commits which are not empty to start, are not clean
cherry-picks of upstream commits, but which still become empty after
being rebased. This happens e.g. when a commit has changes which
are a strict subset of the changes in an upstream commit, or when
the changes of a commit can be found spread across or among several
upstream commits.
Clearly, in both cases the changes in the commit in question are found
upstream already, but the commit message may not be in the latter case.
When cherry-mark can determine a commit is already upstream, then
because of how cherry-mark works this means the upstream commit message
was about the *exact* same set of changes. Thus, the commit messages
can be assumed to be fully interchangeable (and are in fact likely to be
completely identical). As such, the clean cherry-pick case represents a
case when there is no information to be gained by keeping the extra
commit around. All rebase types have always dropped these commits, and
no one to my knowledge has ever requested that we do otherwise.
For many of the become empty cases (and likely even most), we will also
be able to drop the commit without loss of information -- but this isn't
quite always the case. Since these commits represent cases that were
not clean cherry-picks, there is no upstream commit message explaining
the same set of changes. Projects with good commit message hygiene will
likely have the explanation from our commit message contained within or
spread among the relevant upstream commits, but not all projects run
that way. As such, the commit message of the commit being rebased may
have reasoning that suggests additional changes that should be made to
adapt to the new base, or it may have information that someone wants to
add as a note to another commit, or perhaps someone even wants to create
an empty commit with the commit message as-is.
Junio commented on the "become-empty" types of commits as follows[1]:
WRT a change that ends up being empty (as opposed to a change that
is empty from the beginning), I'd think that the current behaviour
is desireable one. "am" based rebase is solely to transplant an
existing history and want to stop much less than "interactive" one
whose purpose is to polish a series before making it publishable,
and asking for confirmation ("this has become empty--do you want to
drop it?") is more appropriate from the workflow point of view.
[1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/
I would simply add that his arguments for "am"-based rebases actually
apply to all non-explicitly-interactive rebases. Also, since we are
stating that different cases should have different defaults, it may be
worth providing a flag to allow users to select which behavior they want
for these commits.
Introduce a new command line flag for selecting the desired behavior:
--empty={drop,keep,ask}
with the definitions:
drop: drop commits which become empty
keep: keep commits which become empty
ask: provide the user a chance to interact and pick what to do with
commits which become empty on a case-by-case basis
In line with Junio's suggestion, if the --empty flag is not specified,
pick defaults as follows:
explicitly interactive: ask
otherwise: drop
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Different rebase backends have different treatment for commits which
start empty (i.e. have no changes relative to their parent), and the
--keep-empty option was added at some point to allow adjusting behavior.
The handling of commits which start empty is actually quite similar to
commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default,
2018-06-27), which pointed out that the behavior for various backends is
often more happenstance than design. The specific change made in that
commit is actually quite relevant as well and much of the logic there
directly applies here.
It makes a lot of sense in 'git commit' to error out on the creation of
empty commits, unless an override flag is provided. However, once
someone determines that there is a rare case that merits using the
manual override to create such a commit, it is somewhere between
annoying and harmful to have to take extra steps to keep such
intentional commits around. Granted, empty commits are quite rare,
which is why handling of them doesn't get considered much and folks tend
to defer to existing (accidental) behavior and assume there was a reason
for it, leading them to just add flags (--keep-empty in this case) that
allow them to override the bad defaults. Fix the interactive backend so
that --keep-empty is the default, much like we did with
--allow-empty-message. The am backend should also be fixed to have
--keep-empty semantics for commits that start empty, but that is not
included in this patch other than a testcase documenting the failure.
Note that there was one test in t3421 which appears to have been written
expecting --keep-empty to not be the default as correct behavior. This
test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of
empty commits", 2013-06-06), which was part of a series focusing on
rebase topology and which had an interesting original cover letter at
https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/
which noted
Your input especially appreciated on whether you agree with the
intent of the test cases.
and then went into a long example about how one of the many tests added
had several questions about whether it was correct. As such, I believe
most the tests in that series were about testing rebase topology with as
many different flags as possible and were not trying to state in general
how those flags should behave otherwise.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27) made --allow-empty-message the default and thus
turned --allow-empty-message into a no-op but did not update the
documentation to reflect this. Update the documentation now, and hide
the option from the normal -h output since it is not useful.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
Documentation markup fix.
* ma/config-advice-markup-fix:
config/advice.txt: fix description list separator
|
|
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* tm/doc-submodule-absorb-fix:
doc: submodule: fix typo for command absorbgitdirs
|
|
Doc update.
* pm/am-in-body-header-doc-update:
am: document that Date: can appear as an in-body header
|
|
Typofix.
* jb/doc-multi-pack-idx-fix:
multi-pack-index: correct configuration in documentation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ds/sparse-cone:
Documentation/git-sparse-checkout.txt: fix a typo
sparse-checkout: use extern for global variables
|
|
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
|
|
Doc update.
* pb/clarify-line-log-doc:
doc: log, gitk: line-log arguments must exist in starting revision
doc: log, gitk: document accepted line-log diff formats
|
|
The sentence wants to talk about the superproject's possesive, not plural form.
Signed-off-by: Thomas Menzel <dev@tomsit.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's core.multiPackIndex, not pack.multiIndex.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This typo was introduced in 94c0956b60 (sparse-checkout: create builtin
with 'list' subcommand, 2019-11-21).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The line number, regex or offset parameters <start> and <end> in
`git log -L <start>,<end>:<file>`, or the function name regex in
`git log -L :<funcname>:<file>` must exist in the starting
revision, or else the command exits with a fatal error.
This is not obvious in the documentation, so add a note to that
effect.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the line-log functionality (git log -L) only supports
displaying patch output (`-p | --patch`, its default behavior) and suppressing it
(`-s | --no-patch`). A check was added in the code to that effect in 5314efaea
(line-log: detect unsupported formats, 2019-03-10) but the documentation was not
updated.
Explicitly mention that `-L` implies `-p`, that patch output can be
suppressed using `-s`, and that all other diff formats are not allowed.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc cleanup.
* ja/doc-markup-cleanup:
doc: indent multi-line items in list
doc: remove non pure ASCII characters
|
|
Doc update.
* pb/submodule-doc-xref:
gitmodules: link to gitsubmodules guide
|
|
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
|
|
"git format-patch" can take a set of configured format.notes values
to specify which notes refs to use in the log message part of the
output. The behaviour of this was not consistent with multiple
--notes command line options, which has been corrected.
* dl/format-patch-notes-config-fixup:
notes.h: fix typos in comment
notes: break set_display_notes() into smaller functions
config/format.txt: clarify behavior of multiple format.notes
format-patch: move git_config() before repo_init_revisions()
format-patch: use --notes behavior for format.notes
notes: extract logic into set_display_notes()
notes: create init_display_notes() helper
notes: rename to load_display_notes()
|
|
A few more commands learned the "--pathspec-from-file" command line
option.
* am/pathspec-f-f-checkout:
checkout, restore: support the --pathspec-from-file option
doc: restore: synchronize <pathspec> description
doc: checkout: synchronize <pathspec> description
doc: checkout: fix broken text reference
doc: checkout: remove duplicate synopsis
add: support the --pathspec-from-file option
cmd_add: prepare for next patch
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* hw/doc-in-header:
trace2: move doc to trace2.h
submodule-config: move doc to submodule-config.h
tree-walk: move doc to tree-walk.h
trace: move doc to trace.h
run-command: move doc to run-command.h
parse-options: add link to doc file in parse-options.h
credential: move doc to credential.h
argv-array: move doc to argv-array.h
cache: move doc to cache.h
sigchain: move doc to sigchain.h
pathspec: move doc to pathspec.h
revision: move doc to revision.h
attr: move doc to attr.h
refs: move doc to refs.h
remote: move doc to remote.h and refspec.h
sha1-array: move doc to sha1-array.h
merge: move doc to ll-merge.h
graph: move doc to graph.h and graph.c
dir: move doc to dir.h
diff: move doc to diff.h and diffcore.h
|
|
"git rebase" did not work well when format.useAutoBase
configuration variable is set, which has been corrected.
* dl/rebase-with-autobase:
rebase: fix format.useAutoBase breakage
format-patch: teach --no-base
t4014: use test_config()
format-patch: fix indentation
t3400: demonstrate failure with format.useAutoBase
|
|
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although Asciidoc allows to not indent following lines in a list item,
it is clearer and safer to follow the recommended rule.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Non ASCII characters may be handled by publishing chains, but right
now, nothing indicates the encoding of files. Moreover, non ASCII
source strings upset the localization toolchain.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8164c961e1 (format-patch: use --notes behavior for format.notes,
2019-12-09), we slightly tweaked the behavior of having multiple
`format.notes` configuration variables. We did not update the
documentation to reflect this, however.
Explictly state the behavior of having multiple `format.notes`
configuration variables so users are clear on what to expect.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Presently in the manpages git-submodule[1] links to gitsubmodules[7]
and gitmodules[5], gitsubmodules[7] links to git-submodule[1] and gitmodules[5],
but gitmodules[5] only link to git-submodule[1] (and git-config[1]).
Add a link to gitsubmodules[7] in gitmodules[5], so that a person
stumbling upon gitmodules[5] can quickly access gitsubmodules[7],
which has a more high-level overview of submodule usage.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One kind of progress messages were always given during commit-graph
generation, instead of following the "if it takes more than two
seconds, show progress" pattern, which has been corrected.
* ds/commit-graph-delay-gen-progress:
commit-graph: use start_delayed_progress()
progress: create GIT_PROGRESS_DELAY
|
|
The interaction between "git clone --recurse-submodules" and
alternate object store was ill-designed. The documentation and
code have been taught to make more clear recommendations when the
users see failures.
* jt/clone-recursesub-ref-advise:
submodule--helper: advise on fatal alternate error
Doc: explain submodule.alternateErrorStrategy
|
|
"git log" family learned "--pretty=reference" that gives the name
of a commit in the format that is often used to refer to it in log
messages.
* dl/pretty-reference:
SubmittingPatches: use `--pretty=reference`
pretty: implement 'reference' format
pretty: add struct cmt_fmt_map::default_date_mode_type
pretty: provide short date format
t4205: cover `git log --reflog -z` blindspot
pretty.c: inline initalize format_context
revision: make get_revision_mark() return const pointer
completion: complete `tformat:` pretty format
SubmittingPatches: remove dq from commit reference
pretty-formats.txt: use generic terms for hash
SubmittingPatches: use generic terms for hash
|
|
"git submodule" learned a subcommand "set-url".
* dl/submodule-set-url:
submodule: teach set-url subcommand
|
|
Work around a issue where a FD that is left open when spawning a
child process and is kept open in the child can interfere with the
operation in the parent process on Windows.
* js/mingw-inherit-only-std-handles:
mingw: forbid translating ERROR_SUCCESS to an errno value
mingw: do set `errno` correctly when trying to restrict handle inheritance
mingw: restrict file handle inheritance only on Windows 7 and later
mingw: spawned processes need to inherit only standard handles
mingw: work around incorrect standard handles
mingw: demonstrate that all file handles are inherited by child processes
|
|
Doc update.
* po/bundle-doc-clonable:
Doc: Bundle file usage
|
|
"git rebase -i" learned a few options that are known by "git
rebase" proper.
* ra/rebase-i-more-options:
rebase -i: finishing touches to --reset-author-date
rebase: add --reset-author-date
rebase -i: support --ignore-date
sequencer: rename amend_author to author_to_rename
rebase -i: support --committer-date-is-author-date
sequencer: allow callers of read_author_script() to ignore fields
rebase -i: add --ignore-whitespace flag
|
|
A few commands learned to take the pathspec from the
standard input or a named file, instead of taking it as the command
line arguments.
* am/pathspec-from-file:
commit: support the --pathspec-from-file option
doc: commit: synchronize <pathspec> description
reset: support the `--pathspec-from-file` option
doc: reset: synchronize <pathspec> description
pathspec: add new function to parse file
parse-options.h: add new options `--pathspec-from-file`, `--pathspec-file-nul`
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Junio C Hamano
Martin Ågren
Thomas Menzel
Paul Menzel
Johannes Berg
Taylor Blau
Derrick Stolee
Philippe Blain
ryenus
Jean-Noël Avila
Denton Liu