| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
|
|
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
|
|
Interaction between fetch.negotiationAlgorithm and
feature.experimental configuration variables has been corrected.
* en/fetch-negotiation-default-fix:
repo-settings: rename the traditional default fetch.negotiationAlgorithm
repo-settings: fix error handling for unknown values
repo-settings: fix checking for fetch.negotiationAlgorithm=default
|
|
A bug that made multi-pack bitmap and the object order out-of-sync,
making the .midx data corrupt, has been fixed.
* tb/midx-bitmap-corruption-fix:
pack-bitmap.c: gracefully fallback after opening pack/MIDX
midx: read `RIDX` chunk when present
t/lib-bitmap.sh: parameterize tests over reverse index source
t5326: move tests to t/lib-bitmap.sh
t5326: extract `test_rev_exists`
t5326: drop unnecessary setup
pack-revindex.c: instrument loading on-disk reverse index
midx.c: make changing the preferred pack safe
t5326: demonstrate bitmap corruption after permutation
|
|
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
|
|
Typofix.
* ll/doc-mktree-typofix:
fix typo in git-mktree.txt
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the contributor-facing documents on proposed log messages.
* jc/doc-log-messages:
SubmittingPatches: explain why we care about log messages
CodingGuidelines: hint why we value clearly written log messages
SubmittingPatches: write problem statement in the log in the present tense
|
|
Typofix.
* gh/doc-typos:
Documentation/config/pgp.txt: add missing apostrophe
Documentation/config/pgp.txt: replace stray <TAB> character with <SPC>
|
|
Doc and test update around the eol attribute.
* bc/clarify-eol-attr:
docs: correct documentation about eol attribute
t0027: add tests for eol without text in .gitattributes
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
|
|
"git name-rev --stdin" does not behave like usual "--stdin" at
all. Start the process of renaming it to "--annotate-stdin".
* jc/name-rev-stdin:
name-rev.c: use strbuf_getline instead of limited size buffer
name-rev: deprecate --stdin in favor of --annotate-stdin
|
|
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
|
|
We explain that revs come first before the pathspec among command
line arguments, but did not spell out that dashed options come
before other args, which has been corrected.
* tl/doc-cli-options-first:
git-cli.txt: clarify "options first and then args"
|
|
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
|
|
fix a typo: change "as" to "a".
Signed-off-by: Liginity Lee <liginity@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When this option is specified, we remerge all (two parent) merge commits
and diff the actual merge commit to the automatically created version,
in order to show how users removed conflict markers, resolved the
different conflict versions, and potentially added new changes outside
of conflict regions in order to resolve semantic merge problems (or,
possibly, just to hide other random changes).
This capability works by creating a temporary object directory and
marking it as the primary object store. This makes it so that any blobs
or trees created during the automatic merge are easily removable
afterwards by just deleting all objects from the temporary object
directory.
There are a few ways that this implementation is suboptimal:
* `log --remerge-diff` becomes slow, because the temporary object
directory can fill with many loose objects while running
* the log output can be muddied with misplaced "warning: cannot merge
binary files" messages, since ll-merge.c unconditionally writes those
messages to stderr while running instead of allowing callers to
manage them.
* important conflict and warning messages are simply dropped; thus for
conflicts like modify/delete or rename/rename or file/directory which
are not representable with content conflict markers, there may be no
way for a user of --remerge-diff to know that there had been a
conflict which was resolved (and which possibly motivated other
changes in the merge commit).
* when fixing the previous issue, note that some unimportant conflict
and warning messages might start being included. We should instead
make sure these remain dropped.
Subsequent commits will address these issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Give the traditional default fetch.negotiationAlgorithm the name
'consecutive'. Also allow a choice of 'default' to have Git decide
between the choices (currently, picking 'skipping' if
feature.experimental is true and 'consecutive' otherwise). Update the
documentation accordingly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, before we had `--intent-to-add`, there was no way that `git
diff-files` could see added files: if a file did not exist in the index,
`git diff-files` would not show it because it looks only at worktree
files when there is an index entry at the same path.
We used this example in the documentation of the diff options to explain
that not every `--diff-filter=<option>` has an effect in all scenarios.
Even when we added `--intent-to-add`, the comment was still correct,
because initially we showed such files as modified instead of added.
However, when that bug was fixed in feea6946a5b (diff-files: treat
"i-t-a" files as "not-in-index", 2020-06-20), the comment in the
documentation became incorrect.
Let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8a2cd3f5123 (stash: remove the stash.useBuiltin setting, 2020-03-03),
we removed the setting, and for a couple of major versions, we still
documented the setting, telling users that it is gone.
We can now safely remove even the documentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the "describe your changes well" section to cover whom we are
trying to help by doing so in the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We give a guidance for proposed log message to write problem
statement first, followed by the reasoning behind, and recipe for,
the solution. Clarify that we describe the situation _before_ the
proposed patch is applied in the present tense (not in the past
tense e.g. "we used to do X, but thanks to this commit we now do Y")
for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous patch demonstrates a bug where a MIDX's auxiliary object
order can become out of sync with a MIDX bitmap.
This is because of two confounding factors:
- First, the object order is stored in a file which is named according
to the multi-pack index's checksum, and the MIDX does not store the
object order. This means that the object order can change without
altering the checksum.
- But the .rev file is moved into place with finalize_object_file(),
which link(2)'s the file into place instead of renaming it. For us,
that means that a modified .rev file will not be moved into place if
MIDX's checksum was unchanged.
This fix is to force the MIDX's checksum to change when the preferred
pack changes but the set of packs contained in the MIDX does not. In
other words, when the object order changes, the MIDX's checksum needs to
change with it (regardless of whether the MIDX is tracking the same or
different packs).
This prevents a race whereby changing the object order (but not the
packs themselves) enables a reader to see the new .rev file with the old
MIDX, or similarly seeing the new bitmap with the old object order.
But why can't we just stop hardlinking the .rev into place instead
adding additional data to the MIDX? Suppose that's what we did. Then
when we go to generate the new bitmap, we'll load the old MIDX bitmap,
along with the MIDX that it references. That's fine, since the new MIDX
isn't moved into place until after the new bitmap is generated. But the
new object order *has* been moved into place. So we'll read the old
bitmaps in the new order when generating the new bitmap file, meaning
that without this secondary change, bitmap generation itself would
become a victim of the race described here.
This can all be prevented by forcing the MIDX's checksum to change when
the object order does. By embedding the entire object order into the
MIDX, we do just that. That is, the MIDX's checksum will change in
response to any perturbation of the underlying object order. In t5326,
this will cause the MIDX's checksum to update (even without changing the
set of packs in the MIDX), preventing the stale read problem.
Note that this makes it safe to continue to link(2) the MIDX .rev file
into place, since it is now impossible to have a .rev file that is
out-of-sync with the MIDX whose checksum it references. (But we will do
away with MIDX .rev files later in this series anyway, so this is
somewhat of a moot point).
In theory, it is possible to store a "fingerprint" of the full object
order here, so long as that fingerprint changes at least as often as the
full object order does. Some possibilities here include storing the
identity of the preferred pack, along with the mtimes of the
non-preferred packs in a consistent order. But storing a limited part of
the information makes it difficult to reason about whether or not there
are gaps between the two that would cause us to get bitten by this bug
again.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an apostrophe to "signatures" to indicate the possessive
relationship in "the signature's creation".
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Specifically, replace the tab between "the" and "first" with a space.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
|
|
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git fetch --negotiate-only` is an implementation detail of push
negotiation and, unlike most `git fetch` invocations, does not actually
update the main repository. Thus it should not update submodules even
if submodule recursion is enabled.
This is not just slow, it is wrong e.g. push negotiation with
"submodule.recurse=true" will cause submodules to be updated because it
invokes `git fetch --negotiate-only`.
Fix this by disabling submodule recursion if --negotiate-only was given.
Since this makes --negotiate-only and --recurse-submodules incompatible,
check for this invalid combination and die.
This does not use the "goto cleanup" introduced in the previous commit
because we want to recurse through submodules whenever a ref is fetched,
and this can happen without introducing new objects.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a feature that supports config file inclusion conditional on
whether the repo has a remote with a URL that matches a glob.
Similar to my previous work on remote-suggested hooks [1], the main
motivation is to allow remote repo administrators to provide recommended
configs in a way that can be consumed more easily (e.g. through a
package installable by a package manager - it could, for example,
contain a file to be included conditionally and a post-install script
that adds the include directive to the system-wide config file).
In order to do this, Git reruns the config parsing mechanism upon
noticing the first URL-conditional include in order to find all remote
URLs, and these remote URLs are then used to determine if that first and
all subsequent includes are executed. Remote URLs are not allowed to be
configued in any URL-conditionally-included file.
[1] https://lore.kernel.org/git/cover.1623881977.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some commands permit the user whether to provide options
first before args, or the reverse order. For example:
git push --dry-run <remote> <ref>
And:
git push <remote> <ref> --dry-run
Both of them is supported, but some commands do not, for instance:
git ls-remote --heads <remote>
And:
git ls-remote <remote> --heads
If <remote> only has one ref and it's name is "refs/heads/--heads", you
will get the same result, otherwise will not.This is because the former
in the second example will parse "--heads" as an "option" which means
to limit to only "refs/heads" when listing the remote references, the
latter treat "--heads" as an argument which means to filter the result
list with the given pattern.
Therefore, we want to specify a bit more in "gitcli.txt" about the way
we recommend and help to resolve the ambiguity around some git command
usage. The related disscussions locate at [1].
By the way, there are some issues with lowercase letters in the document,
which have been modified together.
[1] https://public-inbox.org/git/cover.1642129840.git.dyroneteng@gmail.com/
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for the eol attribute states that it is "effectively
setting the text attribute". However, this implies that it forces the
text attribute to always be set, which has not been the case since
6523728499 ("convert: unify the "auto" handling of CRLF", 2016-06-28).
Let's avoid confusing users (and the present author when trying to
describe Git's behavior to others) by clearly documenting in which
cases the "eol" attribute has effect.
Specifically, the attribute always has an effect unless the file is
explicitly set as -text, or the file is set as text=auto and the file is
detected as binary.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix up whitespace issues around "(... | ...)" in the SYNOPSIS and
usage. These were introduced in ab/cat-file series. See
e145efa6059 (Merge branch 'ab/cat-file' into next, 2022-01-05). In
particular 57d6a1cf96, 5a40417876 and 97fe7250753 in that series.
We'll now correctly emit this usage output:
$ git cat-file -h
usage: git cat-file <type> <object>
or: git cat-file (-e | -p) <object>
or: git cat-file (-t | -s) [--allow-unknown-type] <object>
[...]
Before this the last line of that would be inconsistent with the
preceding "(-e | -p)":
or: git cat-file ( -t | -s ) [--allow-unknown-type] <object>
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the guidance to choose the base commit to build your work
on, and hint/nudge contributors to read others' changes.
* jc/doc-submitting-patches-choice-of-base:
SubmittingPatchs: clarify choice of base and testing
|
|
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
|
|
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
|
|
Introduce a --annotate-stdin that is functionally equivalent of --stdin.
--stdin does not behave as --stdin in other subcommands, such as
pack-objects whereby it takes one argument per line. Since --stdin can
be a confusing and misleading name, rename it to --annotate-stdin.
This change adds a warning to --stdin warning that it will be removed in
the future.
Signed-off-by: "John Cai" <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For certain one-shot hooks we'd like to optimistically run them, and
not complain if they don't exist.
This was already supported by the underlying hook.c library, but had
not been exposed via "git hook run". The command version of this will
be used by send-email in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Liginity Lee
Elijah Newren
Johannes Schindelin
Taylor Blau
Greg Hurrell
René Scharfe
Glen Choo
Jonathan Tan
Teng Long
brian m. carlson
Ævar Arnfjörð Bjarmason
John Cai
Emily Shaffer