| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The stash entry created by "git rebase --autosquash" to keep the
initial dirty state were discarded by mistake upon "git rebase
--quit", which has been corrected.
* dl/merge-autostash-rebase-quit-fix:
rebase: save autostash entry into stash reflog on --quit
|
|
"git merge" learns the "--autostash" option.
* dl/merge-autostash: (22 commits)
pull: pass --autostash to merge
t5520: make test_pull_autostash() accept expect_parent_num
merge: teach --autostash option
sequencer: implement apply_autostash_oid()
sequencer: implement save_autostash()
sequencer: unlink autostash in apply_autostash()
sequencer: extract perform_autostash() from rebase
rebase: generify create_autostash()
rebase: extract create_autostash()
reset: extract reset_head() from rebase
rebase: generify reset_head()
rebase: use apply_autostash() from sequencer.c
sequencer: rename stash_sha1 to stash_oid
sequencer: make apply_autostash() accept a path
rebase: use read_oneliner()
sequencer: make read_oneliner() extern
sequencer: configurably warn on non-existent files
sequencer: make read_oneliner() accept flags
sequencer: make file exists check more efficient
sequencer: stop leaking buf
...
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Those fetching over protocol v2 from linux-next and other kernel
repositories are reporting that v2 often fetches way too much than
needed.
* jn/demote-proto2-from-default:
Revert "fetch: default to protocol version 2"
|
|
Docfix.
* ms/doc-revision-illustration-fix:
docs: fix minor glitch in illustration
|
|
"git grep" did not quote a path with unusual character like other
commands (like "git diff", "git status") do, but did quote when run
from a subdirectory, both of which has been corrected.
* mt/grep-cquote-path:
grep: follow conventions for printing paths w/ unusual chars
|
|
The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
|
|
Doc update.
* eb/mboxrd-doc:
Documentation: explain "mboxrd" pretty format
|
|
Documentation updates around the "--recurse-submodules" option.
* dr/doc-recurse-submodules:
doc: --recurse-submodules mostly applies to active submodules
doc: be more precise on (fetch|push).recurseSubmodules
doc: explain how to deactivate submodule.recurse completely
doc: document --recurse-submodules for reset and restore
doc: list all commands affected by submodule.recurse
|
|
"git log" learns "--[no-]mailmap" as a synonym to "--[no-]use-mailmap"
* jc/log-no-mailmap:
log: give --[no-]use-mailmap a more sensible synonym --[no-]mailmap
clone: reorder --recursive/--recurse-submodules
parse-options: teach "git cmd -h" to show alias as alias
|
|
Raise the minimum required version of docbook-xsl package to 1.74,
as 1.74.0 was from late 2008, which is more than 10 years old, and
drop compatibility cruft from our documentation suite.
* ma/doc-discard-docbook-xsl-1.73:
user-manual.conf: don't specify [listingblock]
INSTALL: drop support for docbook-xsl before 1.74
manpage-normal.xsl: fold in manpage-base.xsl
manpage-bold-literal.xsl: stop using git.docbook.backslash
Doc: drop support for docbook-xsl before 1.73.0
Doc: drop support for docbook-xsl before 1.72.0
Doc: drop support for docbook-xsl before 1.71.1
|
|
"git rebase" happens to call some hooks meant for "checkout" and
"commit" by this was not a designed behaviour than historical
accident. This has been documented.
* en/rebase-doc-hooks-called-by-accident:
git-rebase.txt: add another hook to the hooks section, and explain more
|
|
In a03b55530a (merge: teach --autostash option, 2020-04-07), the
--autostash option was introduced for `git merge`. Notably, when
`git merge --quit` is run with an autostash entry present, it is saved
into the stash reflog. This is contrasted with the current behaviour of
`git rebase --quit` where the autostash entry is simply just dropped out
of existence.
Adopt the behaviour of `git merge --quit` in `git rebase --quit` and
save the autostash entry into the stash reflog instead of just deleting
it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git rebase" to reapply all local commits, even if the may be
already in the upstream, without checking first.
* jt/rebase-allow-duplicate:
rebase --merge: optionally skip upstreamed commits
|
|
"git rebase" (again) learns to honor "--no-keep-empty", which lets
the user to discard commits that are empty from the beginning (as
opposed to the ones that become empty because of rebasing). The
interactive rebase also marks commits that are empty in the todo.
* en/rebase-no-keep-empty:
rebase: fix an incompatible-options error message
rebase: reinstate --no-keep-empty
rebase -i: mark commits that begin empty in todo editor
|
|
"git log" learned "--show-pulls" that helps pathspec limited
history views; a merge commit that takes the whole change from a
side branch, which is normally omitted from the output, is shown
in addition to the commits that introduce real changes.
* ds/revision-show-pulls:
revision: --show-pulls adds helpful merges
|
|
Doc update.
* ma/config-doc-fix:
config.txt: move closing "----" to cover entire listing
|
|
The output from "git format-patch" uses RFC 2047 encoding for
non-ASCII letters on From: and Subject: headers, so that it can
directly be fed to e-mail programs. A new option has been added
to produce these headers in raw.
* eb/format-patch-no-encode-headers:
format-patch: teach --no-encode-email-headers
|
|
The more aggressive updates to remote-tracking branches we had for
the past 7 years or so were not reflected in the documentation,
which has been corrected.
* pb/pull-fetch-doc:
pull doc: correct outdated description of an example
pull doc: refer to a specific section in 'fetch' doc
|
|
"git rebase" learned the "--no-gpg-sign" option to countermand
commit.gpgSign the user may have.
* dd/no-gpg-sign:
Documentation: document merge option --no-gpg-sign
Documentation: merge commit-tree --[no-]gpg-sign
Documentation: reword commit --no-gpg-sign
Documentation: document am --no-gpg-sign
cherry-pick/revert: honour --no-gpg-sign in all case
rebase.c: honour --no-gpg-sign
|
|
Coding guideline update.
* jc/allow-strlen-substitution-in-shell-scripts:
CodingGuidelines: allow ${#posix} == strlen($posix)
|
|
"git pull" shares many options with underlying "git fetch", but
some of them were not documented and some of those that would make
sense to pass down were not passed down.
* rs/pull-options-sync-code-and-doc:
pull: pass documented fetch options on
pull: remove --update-head-ok from documentation
|
|
Code cleanup.
* js/walk-doc-optim:
MyFirstObjectWalk: remove unnecessary conditional statement
|
|
Typofix.
* pb/rebase-doc-typofix:
git-rebase.txt: fix typo
|
|
Trace2 enhancement to allow logging of the environment variables.
* js/trace2-env-vars:
trace2: teach Git to log environment variables
|
|
Doc update.
* bc/faq:
docs: add a FAQ
|
|
"git p4" learned four new hooks and also "--no-verify" option to
bypass them (and the existing "p4-pre-submit" hook).
* bk/p4-pre-edit-changelist:
git-p4: add RCS keyword status message
git-p4: add p4 submit hooks
git-p4: restructure code in submit
git-p4: add --no-verify option
git-p4: add p4-pre-submit exit text
git-p4: create new function run_git_hook
git-p4: rewrite prompt to be Windows compatible
|
|
Doc update.
* ds/doc-clone-filter:
clone: document --filter options
|
|
This reverts commit 684ceae32dae726c6a5c693b257b156926aba8b7.
Users fetching from linux-next and other kernel remotes are reporting
that the limited ref advertisement causes negotiation to reach
MAX_IN_VAIN, resulting in too-large fetches.
Reported-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the example by Jon Loeliger the selector 'A^2' was duplicated. This
might confuse readers.
Signed-off-by: Michael F. Schönitzer <michael@schoenitzer.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
grep does not follow the conventions used by other Git commands when
printing paths that contain unusual characters (as double-quotes or
newlines). Commands such as ls-files, commit, status and diff will:
- Quote and escape unusual pathnames, by default.
- Print names verbatim and unquoted when "-z" is used.
But grep *never* quotes/escapes absolute paths with unusual chars and
*always* quotes/escapes relative ones, even with "-z". Besides being
inconsistent in its own output, the deviation from other Git commands
can be confusing. So let's make it follow the two rules above and add
some tests for this new behavior. Note that, making grep quote/escape
all unusual paths by default, also make it fully compliant with the
core.quotePath configuration, which is currently ignored for absolute
paths.
Reported-by: Greg Hurrell <greg@hurrell.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This merges up the security fix from v2.17.5.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
In 'git log', the --decorate-refs-exclude option appends a pattern
to a string_list. This list is used to prevent showing some refs
in the decoration output, or even by --simplify-by-decoration.
Users may want to use their refs space to store utility refs that
should not appear in the decoration output. For example, Scalar [1]
runs a background fetch but places the "new" refs inside the
refs/scalar/hidden/<remote>/* refspace instead of refs/<remote>/*
to avoid updating remote refs when the user is not looking. However,
these "hidden" refs appear during regular 'git log' queries.
A similar idea to use "hidden" refs is under consideration for core
Git [2].
Add the 'log.excludeDecoration' config option so users can exclude
some refs from decorations by default instead of needing to use
--decorate-refs-exclude manually. The config value is multi-valued
much like the command-line option. The documentation is careful to
point out that the config value can be overridden by the
--decorate-refs option, even though --decorate-refs-exclude would
always "win" over --decorate-refs.
Since the 'log.excludeDecoration' takes lower precedence to
--decorate-refs, and --decorate-refs-exclude takes higher
precedence, the struct decoration_filter needed another field.
This led also to new logic in load_ref_decorations() and
ref_filter_match().
There are several tests in t4202-log.sh that test the
--decorate-refs-(include|exclude) options, so these are extended.
Since the expected output is already stored as a file, most tests
could simply replace a "--decorate-refs-exclude" option with an
in-line config setting. Other tests involve the precedence of
the config option compared to command-line options and needed more
modification.
[1] https://github.com/microsoft/scalar
[2] https://lore.kernel.org/git/77b1da5d3063a2404cd750adfe3bb8be9b6c497d.1585946894.git.gitgitgadget@gmail.com/
Helped-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "mboxrd" pretty format was introduced in 9f23e04061 (pretty: support
"mboxrd" output format, 2016-06-05) but wasn't mentioned in the
documentation.
Signed-off-by: Emma Brooks <me@pluvano.com>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
When rebasing against an upstream that has had many commits since the
original branch was created:
O -- O -- ... -- O -- O (upstream)
\
-- O (my-dev-branch)
it must read the contents of every novel upstream commit, in addition to
the tip of the upstream and the merge base, because "git rebase"
attempts to exclude commits that are duplicates of upstream ones. This
can be a significant performance hit, especially in a partial clone,
wherein a read of an object may end up being a fetch.
Add a flag to "git rebase" to allow suppression of this feature. This
flag only works when using the "merge" backend.
This flag changes the behavior of sequencer_make_script(), called from
do_interactive_rebase() <- run_rebase_interactive() <-
run_specific_rebase() <- cmd_rebase(). With this flag, limit_list()
(indirectly called from sequencer_make_script() through
prepare_revision_walk()) will no longer call cherry_pick_list(), and
thus PATCHSAME is no longer set. Refraining from setting PATCHSAME both
means that the intermediate commits in upstream are no longer read (as
shown by the test) and means that no PATCHSAME-caused skipping of
commits is done by sequencer_make_script(), either directly or through
make_script_with_merges().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit d48e5e21da ("rebase (interactive-backend): make --keep-empty the
default", 2020-02-15) turned --keep-empty (for keeping commits which
start empty) into the default. The logic underpinning that commit was:
1) 'git commit' errors out on the creation of empty commits without an
override flag
2) Once someone determines that the override is worthwhile, it's
annoying and/or harmful to required them to take extra steps in
order to keep such commits around (and to repeat such steps with
every rebase).
While the logic on which the decision was made is sound, the result was
a bit of an overcorrection. Instead of jumping to having --keep-empty
being the default, it jumped to making --keep-empty the only available
behavior. There was a simple workaround, though, which was thought to
be good enough at the time. People could still drop commits which
started empty the same way the could drop any commits: by firing up an
interactive rebase and picking out the commits they didn't want from the
list. However, there are cases where external tools might create enough
empty commits that picking all of them out is painful. As such, having
a flag to automatically remove start-empty commits may be beneficial.
Provide users a way to drop commits which start empty using a flag that
existed for years: --no-keep-empty. Interpret --keep-empty as
countermanding any previous --no-keep-empty, but otherwise leaving
--keep-empty as the default.
This might lead to some slight weirdness since commands like
git rebase --empty=drop --keep-empty
git rebase --empty=keep --no-keep-empty
look really weird despite making perfect sense (the first will drop
commits which become empty, but keep commits that started empty; the
second will keep commits which become empty, but drop commits which
started empty). However, --no-keep-empty was named years ago and we are
predominantly keeping it for backward compatibility; also we suspect it
will only be used rarely since folks already have a simple way to drop
commits they don't want with an interactive rebase.
Reported-by: Bryan Turner <bturner@atlassian.com>
Reported-by: Sami Boukortt <sami@boukortt.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While many users who intentionally create empty commits do not want them
thrown away by a rebase, there are third-party tools that generate empty
commits that a user might not want. In the past, users have used rebase
to get rid of such commits (a side-effect of the fact that the --apply
backend is not currently capable of keeping them). While such users
could fire up an interactive rebase and just remove the lines
corresponding to empty commits, that might be difficult if the
third-party tool generates many of them. Simplify this task for users
by marking such lines with a suffix of " # empty" in the todo list.
Suggested-by: Sami Boukortt <sami@boukortt.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default file history simplification of "git log -- <path>" or
"git rev-list -- <path>" focuses on providing the smallest set of
commits that first contributed a change. The revision walk greatly
restricts the set of walked commits by visiting only the first
TREESAME parent of a merge commit, when one exists. This means
that portions of the commit-graph are not walked, which can be a
performance benefit, but can also "hide" commits that added changes
but were ignored by a merge resolution.
The --full-history option modifies this by walking all commits and
reporting a merge commit as "interesting" if it has _any_ parent
that is not TREESAME. This tends to be an over-representation of
important commits, especially in an environment where most merge
commits are created by pull request completion.
Suppose we have a commit A and we create a commit B on top that
changes our file. When we merge the pull request, we create a merge
commit M. If no one else changed the file in the first-parent
history between M and A, then M will not be TREESAME to its first
parent, but will be TREESAME to B. Thus, the simplified history
will be "B". However, M will appear in the --full-history mode.
However, suppose that a number of topics T1, T2, ..., Tn were
created based on commits C1, C2, ..., Cn between A and M as
follows:
A----C1----C2--- ... ---Cn----M------P1---P2--- ... ---Pn
\ \ \ \ / / / /
\ \__.. \ \/ ..__T1 / Tn
\ \__.. /\ ..__T2 /
\_____________________B \____________________/
If the commits T1, T2, ... Tn did not change the file, then all of
P1 through Pn will be TREESAME to their first parent, but not
TREESAME to their second. This means that all of those merge commits
appear in the --full-history view, with edges that immediately
collapse into the lower history without introducing interesting
single-parent commits.
The --simplify-merges option was introduced to remove these extra
merge commits. By noticing that the rewritten parents are reachable
from their first parents, those edges can be simplified away. Finally,
the commits now look like single-parent commits that are TREESAME to
their "only" parent. Thus, they are removed and this issue does not
cause issues anymore. However, this also ends up removing the commit
M from the history view! Even worse, the --simplify-merges option
requires walking the entire history before returning a single result.
Many Git users are using Git alongside a Git service that provides
code storage alongside a code review tool commonly called "Pull
Requests" or "Merge Requests" against a target branch. When these
requests are accepted and merged, they typically create a merge
commit whose first parent is the previous branch tip and the second
parent is the tip of the topic branch used for the request. This
presents a valuable order to the parents, but also makes that merge
commit slightly special. Users may want to see not only which
commits changed a file, but which pull requests merged those commits
into their branch. In the previous example, this would mean the
users want to see the merge commit "M" in addition to the single-
parent commit "C".
Users are even more likely to want these merge commits when they
use pull requests to merge into a feature branch before merging that
feature branch into their trunk.
In some sense, users are asking for the "first" merge commit to
bring in the change to their branch. As long as the parent order is
consistent, this can be handled with the following rule:
Include a merge commit if it is not TREESAME to its first
parent, but is TREESAME to a later parent.
These merges look like the merge commits that would result from
running "git pull <topic>" on a main branch. Thus, the option to
show these commits is called "--show-pulls". This has the added
benefit of showing the commits created by closing a pull request or
merge request on any of the Git hosting and code review platforms.
To test these options, extend the standard test example to include
a merge commit that is not TREESAME to its first parent. It is
surprising that that option was not already in the example, as it
is instructive.
In particular, this extension demonstrates a common issue with file
history simplification. When a user resolves a merge conflict using
"-Xours" or otherwise ignoring one side of the conflict, they create
a TREESAME edge that probably should not be TREESAME. This leads
users to become frustrated and complain that "my change disappeared!"
In my experience, showing them history with --full-history and
--simplify-merges quickly reveals the problematic merge. As mentioned,
this option is expensive to compute. The --show-pulls option
_might_ show the merge commit (usually titled "resolving conflicts")
more quickly. Of course, this depends on the user having the correct
parent order, which is backwards when using "git pull master" from a
topic branch.
There are some special considerations when combining the --show-pulls
option with --simplify-merges. This requires adding a new PULL_MERGE
object flag to store the information from the initial TREESAME
comparisons. This helps avoid dropping those commits in later filters.
This is covered by a test, including how the parents can be simplified.
Since "struct object" has already ruined its 32-bit alignment by using
33 bits across parsed, type, and flags member, let's not make it worse.
PULL_MERGE is used in revision.c with the same value (1u<<15) as
REACHABLE in commit-graph.c. The REACHABLE flag is only used when
writing a commit-graph file, and a revision walk using --show-pulls
does not happen in the same process. Care must be taken in the future
to ensure this remains the case.
Update Documentation/rev-list-options.txt with significant details
around this option. This requires updating the example in the
History Simplification section to demonstrate some of the problems
with TREESAME second parents.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Denton Liu
Jonathan Nieder
Michael F. Schönitzer
Matheus Tavares
Jeff King
Derrick Stolee
Emma Brooks
Jonathan Tan
Elijah Newren