| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It is legal to sync a branch with a different name than
refs/remotes/p4/master, and to do so even when master does
not exist.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For a clone or sync, --branch says where the newly imported
branch should go, or which existing branch to sync up. It
takes an argument, which is currently either something that
starts with "refs/", or if not, "refs/heads/p4" is prepended.
Putting it in heads seems like a bad default; these should
go in remotes/p4/ in most situations. Make that the new default,
and be more liberal in the form of the branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure that the example on how to use git-p4.branchList
works if typed directly. In particular, it does not make sense
to set a config variable until the git repository has been
initialized.
Reported-by: Olivier Delalleau <shish@keba.be>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the --branch argument to "git p4 clone", one
might specify a destination for p4 changes different from
the default refs/remotes/p4/master. Both cases should
create a master branch and checkout files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/unify-exit-code-by-receiving-signal:
run-command: encode signal death as a positive integer
|
|
* jn/xml-depends-on-asciidoc-conf:
docs: manpage XML depends on asciidoc.conf
|
|
* jk/maint-fast-import-doc-reorder:
git-fast-import(1): reorganise options
git-fast-import(1): combine documentation of --[no-]relative-marks
|
|
* jk/shortlog-no-wrap-doc:
git-shortlog(1): document behaviour of zero-width wrap
|
|
* jk/maint-fast-import-doc-dedup-done:
git-fast-import(1): remove duplicate '--done' option
|
|
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
|
|
* as/api-allocation-doc:
api-allocation-growing.txt: encourage better variable naming
|
|
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
|
|
* kb/maint-bundle-doc:
Documentation: full-ness of a bundle is significant for cloning
Documentation: correct example restore from bundle
|
|
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
|
|
|
|
* ta/remove-stale-translated-tut:
Remove Documentation/pt_BR/gittutorial.txt
|
|
The options in git-fast-import(1) are not currently arranged in a
logical order, which has caused the '--done' options to be documented
twice (commit 3266de10).
Rearrange them into logical groups under subheadings.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The descriptions of '--relative-marks' and '--no-relative-marks' make
more sense when read together instead of as two independent options.
Combine them into a single description block.
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 00d3947 (Teach --wrap to only indent without wrapping) added
special behaviour for a width of zero in the '-w' argument to
'git-shortlog' but this was not documented. Fix this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for the ALLOC_GROW API implicitly encouraged
developers to use "ary" as the variable name for the array which is
dynamically grown. However "ary" is an unusual abbreviation hardly
used anywhere else in the source tree, and it is also better to name
variables based on their contents not on their type.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When building manual pages, the source text is transformed to XML with
AsciiDoc before the man pages are generated from the XML with xmlto.
Fix the dependencies in the Makefile so that the XML files are rebuilt
when asciidoc.conf changes and not just the manual pages from
unchanged XML, and move the dependencies from a recipeless rule to the
rules with commands that use asciidoc.conf to make the dependencies
easier to understand and maintain.
Reported-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a sub-command dies due to a signal, we encode the
signal number into the numeric exit status as "signal -
128". This is easy to identify (versus a regular positive
error code), and when cast to an unsigned integer (e.g., by
feeding it to exit), matches what a POSIX shell would return
when reporting a signal death in $? or through its own exit
code.
So we have a negative value inside the code, but once it
passes across an exit() barrier, it looks positive (and any
code we receive from a sub-shell will have the positive
form). E.g., death by SIGPIPE (signal 13) will look like
-115 to us in inside git, but will end up as 141 when we
call exit() with it. And a program killed by SIGPIPE but run
via the shell will come to us with an exit code of 141.
Unfortunately, this means that when the "use_shell" option
is set, we need to be on the lookout for _both_ forms. We
might or might not have actually invoked the shell (because
we optimize out some useless shell calls). If we didn't invoke
the shell, we will will see the sub-process's signal death
directly, and run-command converts it into a negative value.
But if we did invoke the shell, we will see the shell's
128+signal exit status. To be thorough, we would need to
check both, or cast the value to an unsigned char (after
checking that it is not -1, which is a magic error value).
Fortunately, most callsites do not care at all whether the
exit was from a code or from a signal; they merely check for
a non-zero status, and sometimes propagate the error via
exit(). But for the callers that do care, we can make life
slightly easier by just using the consistent positive form.
This actually fixes two minor bugs:
1. In launch_editor, we check whether the editor died from
SIGINT or SIGQUIT. But we checked only the negative
form, meaning that we would fail to notice a signal
death exit code which was propagated through the shell.
2. In handle_alias, we assume that a negative return value
from run_command means that errno tells us something
interesting (like a fork failure, or ENOENT).
Otherwise, we simply propagate the exit code. Negative
signal death codes confuse us, and we print a useless
"unable to run alias 'foo': Success" message. By
encoding signal deaths using the positive form, the
existing code just propagates it as it would a normal
non-zero exit code.
The downside is that callers of run_command can no longer
differentiate between a signal received directly by the
sub-process, and one propagated. However, no caller
currently cares, and since we already optimize out some
calls to the shell under the hood, that distinction is not
something that should be relied upon by callers.
Fix the same logic in t/test-terminal.perl for consistency [jc:
raised by Jonathan in the discussion].
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We told readers to "send it to the list" (or the maintainer) without
telling what addresses are to be used. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The section is no longer a concise checklist. It also talks about
things that are not covered in the "Long version" text, which means
people need to read both, covering more or less the same thing in
different phrasing.
Fold the details into the main text and remove the section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not necessarily every bundle file can be cloned from. Only the ones
that do not need prerequisites can.
When 1d52b02 (Documentation: minor grammatical fixes and rewording
in git-bundle.txt, 2009-03-22) reworded this paragraph, it lost a
critical hint to tell readers why this particular bundle can be
cloned from. Resurrect it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were only mentioned in periodical "A note from the maintainer"
posting and not in the documentation suite. SubmittingPatches has a
section to help contributors decide on what commit to base their
changes, which is the most suitable place for this information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The introductory text in the "long version" talks about the origin
of this document with "I started ...", but it is unclear who that I
is, and more importantly, it is not interesting how it was started.
Just state the purpose of the document to help readers decide if it
is releavant to them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the bundle created in the example does not record HEAD, "git
clone" will not check out the files to the working tree:
$ git clone pr.bundle q/
Cloning into 'q'...
Receiving objects: 100% (619/619), 13.52 MiB | 18.74 MiB/s, done.
Resolving deltas: 100% (413/413), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Avoid alarming the readers by adding "-b master" to the example. A
better fix may be to arrange the bundle created in the earlier step
to record HEAD, so that it can be cloned without this workaround.
Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sl/maint-git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
|
|
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* branch 'gb/maint-doc-svn-log-window-size':
Document git-svn fetch --log-window-size parameter
|
|
* branch 'km/maint-doc-git-reset':
doc: git-reset: make "<mode>" optional
|
|
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/avoid-mailto-invalid-in-doc:
Documentation: don't link to example mail addresses
|
|
* branch 'tj/maint-doc-commit-sign':
Add -S, --gpg-sign option to manpage of "git commit"
|
|
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This file is rather outdated and IMHO shouldn't be there in the first place.
(If there are translations of the Git documentation they are better be kept
separate from the original documentation.)
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
* jc/doc-diff-blobs:
Documentation: Describe "git diff <blob> <blob>" separately
|
|
* cr/doc-checkout-branch:
Documentation/git-checkout.txt: document 70c9ac2 behavior
Documentation/git-checkout.txt: clarify usage
|
|
* ta/api-index-doc:
Remove misleading date from api-index-skel.txt
|
Pete Wyckoff
Junio C Hamano
John Keeping
Adam Spiers
Jonathan Nieder
Jeff King
Kirill Brilliantov
Sebastian Leske
Max Horn
Ramkumar Ramachandra
Thomas Ackermann