| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -h" incorrectly said "--track[=direct|inherit]",
implying that "--trackinherit" is a valid option, which has been
corrected.
source: <3de40324bea6a1dd9bca2654721471e3809e87d8.1642538935.git.steadmon@google.com>
source: <c3c26192-aee9-185a-e559-b8735139e49c@web.de>
* js/branch-track-inherit:
branch,checkout: fix --track documentation
|
|
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the guidance to choose the base commit to build your work
on, and hint/nudge contributors to read others' changes.
* jc/doc-submitting-patches-choice-of-base:
SubmittingPatchs: clarify choice of base and testing
|
|
"git -c branch.autosetupmerge=inherit branch new old" makes "new"
to have the same upstream as the "old" branch, instead of marking
"old" itself as its upstream.
* js/branch-track-inherit:
config: require lowercase for branch.*.autosetupmerge
branch: add flags and config to inherit tracking
branch: accept multiple upstream branches for tracking
|
|
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc markup fix.
* gh/gpg-doc-markup-fix:
docs: add missing colon to Documentation/config/gpg.txt
|
|
Two fixes around "git repack".
* ds/repack-fixlets:
repack: make '--quiet' disable progress
repack: respect kept objects with '--write-midx -b'
|
|
The default merge message prepared by "git merge" records the name
of the current branch; the name can be overridden with a new option
to allow users to pretend a merge is made on a different branch.
* jc/merge-detached-head-name:
merge: allow to pretend a merge is made into a different branch
|
|
Docfix.
* jk/ssh-signing-doc-markup-fix:
doc/config: mark ssh allowedSigners example as literal
|
|
"git am" learns "--empty=(stop|drop|keep)" option to tweak what is
done to a piece of e-mail without a patch in it.
* xw/am-empty:
am: support --allow-empty to record specific empty patches
am: support --empty=<option> to handle empty patches
doc: git-format-patch: describe the option --always
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
|
|
We encourage identifying what, among many topics on `next`, exact
topics a new work depends on, instead of building directly on
`next`. Let's clarify this in the documentation.
Developers should know what they are building on top of, and be
aware of which part of the system is currently being worked on.
Encouraging them to make trial merges to `next` and `seen`
themselves will incentivize them to read others' changes and
understand them, eventually helping the developers to coordinate
among themselves and reviewing each others' changes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git apply" has been taught to ignore a message without a patch
with the "--allow-empty" option. It also learned to honor the
"--quiet" option given from the command line.
* jz/apply-quiet-and-allow-empty:
git-apply: add --allow-empty flag
git-apply: add --quiet flag
|
|
Existing callers to 'git ls-files' are expecting file names, not
directories. It is best to expand a sparse index to show all of the
contained files in this case.
However, expert users may want to inspect the contents of the index
itself including which directories are sparse. Add a --sparse option to
allow users to request this information.
During testing, I noticed that options such as --modified did not affect
the output when the files in question were outside the sparse-checkout
definition. Tests are added to document this preexisting behavior and
how it remains unchanged with the sparse index and the --sparse option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cryptographic signing using ssh keys can specify literal keys
for keytypes whose name do not begin with the "ssh-" prefix by
using the "key::" prefix mechanism (e.g. "key::ecdsa-sha2-nistp256").
* fs/ssh-signing-other-keytypes:
ssh signing: make sign/amend test more resilient
ssh signing: support non ssh-* keytypes
|
|
Extend the signing of objects with SSH keys and learn to pay
attention to the key validity time range when verifying.
* fs/ssh-signing-key-lifetime:
ssh signing: verify ssh-keygen in test prereq
ssh signing: make fmt-merge-msg consider key lifetime
ssh signing: make verify-tag consider key lifetime
ssh signing: make git log verify key lifetime
ssh signing: make verify-commit consider key lifetime
ssh signing: add key lifetime test prereqs
ssh signing: use sigc struct to pass payload
t/fmt-merge-msg: make gpgssh tests more specific
t/fmt-merge-msg: do not redirect stderr
|
|
Doc update.
* jc/grep-patterntype-default-doc:
grep: clarify what `grep.patternType=default` means
|
|
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
[1]: https://lore.kernel.org/git/20180927221603.148025-1-sbeller@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a series of patches for a topic-B depends on having topic-A,
the workflow to prepare the topic-B branch would look like this:
$ git checkout -b topic-B main
$ git merge --no-ff --no-edit topic-A
$ git am <mbox-for-topic-B
When topic-A gets updated, recreating the first merge and rebasing
the rest of the topic-B, all on detached HEAD, is a useful
technique. After updating topic-A with its new round of patches:
$ git checkout topic-B
$ prev=$(git rev-parse 'HEAD^{/^Merge branch .topic-A. into}')
$ git checkout --detach $prev^1
$ git merge --no-ff --no-edit topic-A
$ git rebase --onto HEAD $prev @{-1}^0
$ git checkout -B @{-1}
This will
(0) check out the current topic-B.
(1) find the previous merge of topic-A into topic-B.
(2) detach the HEAD to the parent of the previous merge.
(3) merge the updated topic-A to it.
(4) reapply the patches to rebuild the rest of topic-B.
(5) update topic-B with the result.
without contaminating the reflog of topic-B too much. topic-B@{1}
is the "logically previous" state before topic-A got updated, for
example. At (4), comparison (e.g. range-diff) between HEAD and
@{-1} is a meaningful way to sanity check the result, and the same
can be done at (5) by comparing topic-B and topic-B@{1}.
But there is one glitch. The merge into the detached HEAD done in
the step (3) above gives us "Merge branch 'topic-A' into HEAD", and
does not say "into topic-B".
Teach the "--into-name=<branch>" option to "git merge" and its
underlying "git fmt-merge-message", to pretend as if we were merging
into <branch>, no matter what branch we are actually merging into,
when they prepare the merge message. The pretend name honors the
usual "into <target>" suppression mechanism, which can be seen in
the tests added here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While testing some ideas in 'git repack', I ran it with '--quiet' and
discovered that some progress output was still shown. Specifically, the
output for writing the multi-pack-index showed the progress.
The 'show_progress' variable in cmd_repack() is initialized with
isatty(2) and is not modified at all by the '--quiet' flag. The
'--quiet' flag modifies the po_args.quiet option which is translated
into a '--quiet' flag for the 'git pack-objects' child process. However,
'show_progress' is used to directly send progress information to the
multi-pack-index writing logic which does not use a child process.
The fix here is to modify 'show_progress' to be false if po_opts.quiet
is true, and isatty(2) otherwise. This new expectation simplifies a
later condition that checks both.
Update the documentation to make it clear that '-q' will disable all
progress in addition to ensuring the 'git pack-objects' child process
will receive the flag.
Use 'test_terminal' to check that this works to get around the isatty(2)
check.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing colon to ensure correct rendering of definition list
item. Without the proper number of colons, it renders as just another
top-level paragraph rather than a list item.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option helps to record specific empty patches in the middle
of an am session, which does create empty commits only when:
1. the index has not changed
2. lacking a branch
When the index has changed, "--allow-empty" will create a non-empty
commit like passing "--continue" or "--resolved".
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since that the command 'git-format-patch' can include patches of
commits that emit no changes, the 'git-am' command should also
support an option, named as '--empty', to specify how to handle
those empty patches. In this commit, we have implemented three
valid options ('stop', 'drop' and 'keep').
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit has described how to use '--always' option in the command
'git-format-patch' to include patches for commits that emit no changes.
Signed-off-by: 徐沛文 (Aleen) <aleen42@vip.qq.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The discussion for gpg.ssh.allowedSignersFile shows an example string
that contains "user1@example.com,user2@example.com". Asciidoc thinks
these are real email addresses and generates "mailto" footnotes for
them. This makes the rendered content more confusing, as it has extra
"[1]" markers:
The file consists of one or more lines of principals followed by an
ssh public key. e.g.: user1@example.com[1],user2@example.com[2]
ssh-rsa AAAAX1... See ssh-keygen(1) "ALLOWED SIGNERS" for details.
and also generates pointless notes at the end of the page:
NOTES
1. user1@example.com
mailto:user1@example.com
2. user2@example.com
mailto:user2@example.com
We can fix this by putting the example into a backtick literal block.
That inhibits the mailto generation, and as a bonus typesets the example
text in a way that sets it off from the regular prose (a tt font for
html, or bold in the roff manpage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in the previous commit, using separate `init` and `set` steps
with sparse-checkout result in a number of issues. The previous commits
made `set` able to handle the work of both commands, and enabled reapply
to tweak the {cone,sparse-index} settings. Update the documentation to
reflect this, and mark `init` as deprecated.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"default" and "reset" colors have been added to our palette.
* re/color-default-reset:
color: allow colors to be prefixed with "reset"
color: support "default" to restore fg/bg color
color: add missing GIT_COLOR_* white/black constants
|
|
Coding guideline document has been updated to clarify what goes to
standard error in our system.
* es/doc-stdout-vs-stderr:
CodingGuidelines: document which output goes to stdout vs. stderr
|
|
"git worktree add" showed "Preparing worktree" message to the
standard output stream, but when it failed, the message from die()
went to the standard error stream. Depending on the order the
stdio streams are flushed at the program end, this resulted in
confusing output. It has been corrected by sending all the chatty
messages to the standard error stream.
* es/worktree-chatty-to-stderr:
git-worktree.txt: add missing `-v` to synopsis for `worktree list`
worktree: send "chatty" messages to stderr
|
|
Extend "git log --format=%(describe)" placeholder to allow passing
selected command-line options to the underlying "git describe"
command.
* es/pretty-describe-more:
pretty: add abbrev option to %(describe)
pretty: add tag option to %(describe)
pretty.c: rework describe options parsing for better extensibility
|
|
"Zealous diff3" style of merge conflict presentation has been added.
* en/zdiff3:
update documentation for new zdiff3 conflictStyle
xdiff: implement a zealous diff3, or "zdiff3"
|
|
Some users or scripts will pipe "git diff"
output to "git apply" when replaying diffs
or commits. In these cases, they will rely
on the return value of "git apply" to know
whether the diff was applied successfully.
However, for empty commits, "git apply" will
fail. This complicates scripts since they
have to either buffer the diff and check
its length, or run diff again with "exit-code",
essentially doing the diff twice.
Add the "--allow-empty" flag to "git apply"
which allows it to handle both empty diffs
and empty commits created by "git format-patch
--always" by doing nothing and returning 0.
Add tests for both with and without --allow-empty.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace OPT_VERBOSE with OPT_VERBOSITY.
This adds a --quiet flag to "git apply" so
the user can turn down the verbosity.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Docfix.
* jt/midx-doc-fix:
Doc: no midx and partial clone relation
|
|
Doc mark-up fix.
* tl/midx-docfix:
midx: fix a formatting issue in "multi-pack-index.txt"
|
|
"git var GIT_DEFAULT_BRANCH" is a way to see what name is used for
the newly created branch if "git init" is run.
* tw/var-default-branch:
var: add GIT_DEFAULT_BRANCH variable
|
|
The "--date=format:<strftime>" gained a workaround for the lack of
system support for a non-local timezone to handle "%s" placeholder.
* jk/strbuf-addftime-seconds-since-epoch:
strbuf_addftime(): handle "%s" manually
|
|
Doc update.
* jc/fix-first-object-walk:
docs: add headers in MyFirstObjectWalk
docs: fix places that break compilation in MyFirstObjectWalk
|
|
Redact the path part of packfile URI that appears in the trace output.
* if/redact-packfile-uri:
http-fetch: redact url on die() message
fetch-pack: redact packfile urls in traces
|
Junio C Hamano
René Scharfe
Derrick Stolee
Josh Steadmon
Greg Hurrell
徐沛文 (Aleen)
Jeff King
Elijah Newren
Jerry Zhang