| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In an upcoming commit, 'git repack' will want to create a pack comprised
of all of the objects in some packs (the included packs) excluding any
objects in some other packs (the excluded packs).
This caller could iterate those packs themselves and feed the objects it
finds to 'git pack-objects' directly over stdin, but this approach has a
few downsides:
- It requires every caller that wants to drive 'git pack-objects' in
this way to implement pack iteration themselves. This forces the
caller to think about details like what order objects are fed to
pack-objects, which callers would likely rather not do.
- If the set of objects in included packs is large, it requires
sending a lot of data over a pipe, which is inefficient.
- The caller is forced to keep track of the excluded objects, too, and
make sure that it doesn't send any objects that appear in both
included and excluded packs.
But the biggest downside is the lack of a reachability traversal.
Because the caller passes in a list of objects directly, those objects
don't get a namehash assigned to them, which can have a negative impact
on the delta selection process, causing 'git pack-objects' to fail to
find good deltas even when they exist.
The caller could formulate a reachability traversal themselves, but the
only way to drive 'git pack-objects' in this way is to do a full
traversal, and then remove objects in the excluded packs after the
traversal is complete. This can be detrimental to callers who care
about performance, especially in repositories with many objects.
Introduce 'git pack-objects --stdin-packs' which remedies these four
concerns.
'git pack-objects --stdin-packs' expects a list of pack names on stdin,
where 'pack-xyz.pack' denotes that pack as included, and
'^pack-xyz.pack' denotes it as excluded. The resulting pack includes all
objects that are present in at least one included pack, and aren't
present in any excluded pack.
To address the delta selection problem, 'git pack-objects --stdin-packs'
works as follows. First, it assembles a list of objects that it is going
to pack, as above. Then, a reachability traversal is started, whose tips
are any commits mentioned in included packs. Upon visiting an object, we
find its corresponding object_entry in the to_pack list, and set its
namehash parameter appropriately.
To avoid the traversal visiting more objects than it needs to, the
traversal is halted upon encountering an object which can be found in an
excluded pack (by marking the excluded packs as kept in-core, and
passing --no-kept-objects=in-core to the revision machinery).
This can cause the traversal to halt early, for example if an object in
an included pack is an ancestor of ones in excluded packs. But stopping
early is OK, since filling in the namehash fields of objects in the
to_pack list is only additive (i.e., having it helps the delta selection
process, but leaving it blank doesn't impact the correctness of the
resulting pack).
Even still, it is unlikely that this hurts us much in practice, since
the 'git repack --geometric' caller (which is introduced in a later
commit) marks small packs as included, and large ones as excluded.
During ordinary use, the small packs usually represent pushes after a
large repack, and so are unlikely to be ancestors of objects that
already exist in the repository.
(I found it convenient while developing this patch to have 'git
pack-objects' report the number of objects which were visited and got
their namehash fields filled in during traversal. This is also included
in the below patch via trace2 data lines).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git maintenance" tool learned a new "pack-refs" maintenance task.
* ds/maintenance-pack-refs:
maintenance: incremental strategy runs pack-refs weekly
maintenance: add pack-refs task
|
|
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
|
|
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
|
|
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
|
|
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
|
|
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
|
|
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
|
|
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
|
|
`git worktree list` now annotates worktrees as prunable, shows
locked and prunable attributes in --porcelain mode, and gained
a --verbose option.
* rs/worktree-list-verbose:
worktree: teach `list` verbose mode
worktree: teach `list` to annotate prunable worktree
worktree: teach `list --porcelain` to annotate locked worktree
t2402: ensure locked worktree is properly cleaned up
worktree: teach worktree_lock_reason() to gently handle main worktree
worktree: teach worktree to lazy-load "prunable" reason
worktree: libify should_prune_worktree()
|
|
When trying to find a .mailmap file, we will always look for it in the
current directory. This makes sense in a repository with a working tree,
since we'd always go to the toplevel directory at startup. But for a
bare repository, it can be confusing. With an option like --git-dir (or
$GIT_DIR in the environment), we don't chdir at all, and we'd read
.mailmap from whatever directory you happened to be in before starting
Git.
(Note that --git-dir without specifying a working tree historically
means "the current directory is the root of the working tree", but most
bare repositories will have core.bare set these days, meaning they will
realize there is no working tree at all).
The documentation for gitmailmap(5) says:
If the file `.mailmap` exists at the toplevel of the repository[...]
which likewise reinforces the notion that we are looking in the working
tree.
This patch prevents us from looking for such a file when we're in a bare
repository. This does break something that used to work:
cd bare.git
git cat-file blob HEAD:.mailmap >.mailmap
git shortlog
But that was never advertised in the documentation. And these days we
have mailmap.blob (which defaults to HEAD:.mailmap) to do the same thing
in a much cleaner way.
However, there's one more interesting case: we might not have a
repository at all! The git-shortlog command can be run with git-log
output fed on its stdin, and it will apply the mailmap. In that case, it
probably does make sense to read .mailmap from the current directory.
This patch will continue to do so.
That leads to one even weirder case: if you run git-shortlog to process
stdin, the input _could_ be from a different repository entirely. Should
we respect the in-tree .mailmap then? Probably yes. Whatever the source
of the input, if shortlog is running in a repository, the documentation
claims that we'd read the .mailmap from its top-level (and of course
it's reasonably likely that it _is_ from the same repo, and the user
just preferred to run git-log and git-shortlog separately for whatever
reason).
The included test covers these cases, and we now document the "no repo"
case explicitly.
We also add a test that confirms we find a top-level ".mailmap" even
when we start in a subdirectory of the working tree. This worked both
before and after this commit, but we never tested it explicitly (it
works because we always chdir to the top-level of the working tree if
there is one).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the 'maintenance.strategy' config option is set to 'incremental',
a default maintenance schedule is enabled. Add the 'pack-refs' task to
that strategy at the weekly cadence.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is valuable to collect loose refs into a more compressed form. This
is typically the packed-refs file, although this could be the reftable
in the future. Having packed refs can be extremely valuable in repos
with many tags or remote branches that are not modified by the local
user, but still are necessary for other queries.
For instance, with many exploded refs, commands such as
git describe --tags --exact-match HEAD
can be very slow (multiple seconds). This command in particular is used
by terminal prompts to show when a detatched HEAD is pointing to an
existing tag, so having it be slow causes significant delays for users.
Add a new 'pack-refs' maintenance task. It runs 'git pack-refs --all
--prune' to move loose refs into a packed form. For now, that is the
packed-refs file, but could adjust to other file formats in the future.
This is the first of several sub-tasks of the 'gc' task that could be
extracted to their own tasks. In this process, we should not change the
behavior of the 'gc' task since that remains the default way to keep
repositories maintained. Creating a new task for one of these sub-tasks
only provides more customization options for those choosing to not use
the 'gc' task. It is certainly possible to have both the 'gc' and
'pack-refs' tasks enabled and run regularly. While they may repeat
effort, they do not conflict in a destructive way.
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs should
be run during 'git maintenance run --auto'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a per-tool override flag so that users may enable the flag for one
tool and disable it for another by setting
`mergetool.<tool>.hideResolved` to `false`.
In addition, the author or maintainer of a mergetool may optionally
override the default `hideResolved` value for that mergetool. If the
`mergetools/<tool>` shell script contains a `hide_resolved_enabled`
function it will be called when the mergetool is invoked and the return
value will be used as the default for the `hideResolved` flag.
hide_resolved_enabled () {
return 1
}
Disabling may be desirable if the mergetool wants or needs access to the
original, unmodified 'LOCAL' and 'REMOTE' versions of the conflicted
file. For example:
- A tool may use a custom conflict resolution algorithm and prefer to
ignore the results of Git's conflict resolution.
- A tool may want to visually compare/constrast the version of the file
from before the merge (saved to 'LOCAL', 'REMOTE', and 'BASE') with
Git's conflict resolution results (saved to 'MERGED').
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is preparation for the following commit where we need to source the
mergetool shell script to look for overrides before `run_merge_tool` is
called. Previously `run_merge_tool` both sourced that script and invoked
the mergetool.
In the case of the following commit, we need the result of the
`hide_resolved` override, if present, before we actually run
`run_merge_tool`.
The new `initialize_merge_tool` wrapper is exposed and documented as
a public interface for consistency with the existing `run_merge_tool`
which is also public. Although `setup_tool` could instead be exposed
directly, the related `setup_user_tool` would probably also want to be
elevated to match and this felt the cleanest to me.
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The purpose of a mergetool is to help the user resolve any conflicts
that Git cannot automatically resolve. If there is a conflict that must
be resolved manually Git will write a file named MERGED which contains
everything Git was able to resolve by itself and also everything that it
was not able to resolve wrapped in conflict markers.
One way to think of MERGED is as a two- or three-way diff. If each
"side" of the conflict markers is separately extracted an external tool
can represent those conflicts as a side-by-side diff.
However many mergetools instead diff LOCAL and REMOTE both of which
contain versions of the file from before the merge. Since the conflicts
Git resolved automatically are not present it forces the user to
manually re-resolve those conflicts. Some mergetools also show MERGED
but often only for reference and not as the focal point to resolve the
conflicts.
This adds a `mergetool.hideResolved` flag that will overwrite LOCAL and
REMOTE with each corresponding "side" of a conflicted file and thus hide
all conflicts that Git was able to resolve itself. Overwriting these
files will immediately benefit any mergetool that uses them without
requiring any changes to the tool.
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`. However it can be globally disabled
by setting `mergetool.hideResolved` to `false`.
[1] https://www.eseth.org/2020/mergetools.html
https://github.com/whiteinge/eseth/blob/c884424769fffb05d87afb33b2cf80cecb4044c3/2020/mergetools.md
Original-implementation-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* ma/doc-pack-format-varint-for-sizes:
pack-format.txt: document sizes at start of delta data
|
|
There are three forms, depending whether the user specifies one, two or
three non-option arguments. We've never actually explained how this
works in the manual, so let's explain it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When comparing commit ranges, one is frequently interested only in one
side, such as asking the question "Has this patch that I submitted to
the Git mailing list been applied?": one would only care about the part
of the output that corresponds to the commits in a local branch.
To make that possible, imitate the `git rev-list` options `--left-only`
and `--right-only`.
This addresses https://github.com/gitgitgadget/git/issues/206
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git ls-files" can and does show multiple entries when the index is
unmerged, which is a source for confusion unless -s/-u option is in
use. A new option --deduplicate has been introduced.
* zh/ls-files-deduplicate:
ls-files.c: add --deduplicate option
ls_files.c: consolidate two for loops into one
ls_files.c: bugfix for --deleted and --modified
|
|
Document, clean-up and optimize the code around the cache-tree
extension in the index.
* ds/cache-tree-basics:
cache-tree: speed up consecutive path comparisons
cache-tree: use ce_namelen() instead of strlen()
index-format: discuss recursion of cache-tree better
index-format: update preamble to cache tree extension
index-format: use 'cache tree' over 'cached tree'
cache-tree: trace regions for prime_cache_tree
cache-tree: trace regions for I/O
cache-tree: use trace2 in cache_tree_update()
unpack-trees: add trace2 regions
tree-walk: report recursion counts
|
|
"git log" learned a new "--diff-merges=<how>" option.
* so/log-diff-merge: (32 commits)
t4013: add tests for --diff-merges=first-parent
doc/git-show: include --diff-merges description
doc/rev-list-options: document --first-parent changes merges format
doc/diff-generate-patch: mention new --diff-merges option
doc/git-log: describe new --diff-merges options
diff-merges: add '--diff-merges=1' as synonym for 'first-parent'
diff-merges: add old mnemonic counterparts to --diff-merges
diff-merges: let new options enable diff without -p
diff-merges: do not imply -p for new options
diff-merges: implement new values for --diff-merges
diff-merges: make -m/-c/--cc explicitly mutually exclusive
diff-merges: refactor opt settings into separate functions
diff-merges: get rid of now empty diff_merges_init_revs()
diff-merges: group diff-merge flags next to each other inside 'rev_info'
diff-merges: split 'ignore_merges' field
diff-merges: fix -m to properly override -c/--cc
t4013: add tests for -m failing to override -c/--cc
t4013: support test_expect_failure through ':failure' magic
diff-merges: revise revs->diff flag handling
diff-merges: handle imply -p on -c/--cc logic for log.c
...
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix for packfile URI feature.
* jt/packfile-as-uri-doc:
Doc: clarify contents of packfile sent as URI
|
|
Documentation for "git fsck" lost stale bits that has become
incorrect.
* ab/fsck-doc-fix:
fsck doc: remove ancient out-of-date diagnostics
|
|
Doc update.
* tb/local-clone-race-doc:
Documentation/git-clone.txt: document race with --local
|
|
Doc update.
* bc/doc-status-short:
docs: rephrase and clarify the git status --short format
|
|
Doc update.
* ug/doc-lose-dircache:
doc: remove "directory cache" from man pages
|
|
Doc update.
* vv/send-email-with-less-secure-apps-access:
git-send-email.txt: mention less secure app access with Gmail
|
|
Doc update.
* jc/sign-off:
SubmittingPatches: tighten wording on "sign-off" procedure
|
|
Doc fix.
* pb/doc-modules-git-work-tree-typofix:
gitmodules.txt: fix 'GIT_WORK_TREE' variable name
|
|
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Doc fix for packfile URI feature.
* jt/packfile-as-uri-doc:
Doc: clarify contents of packfile sent as URI
|
|
Documentation for "git fsck" lost stale bits that has become
incorrect.
* ab/fsck-doc-fix:
fsck doc: remove ancient out-of-date diagnostics
|
|
The description for "-c" is hard to parse. I think the big issue is lack
of commas, but I've also reordered the words to keep the main focus
point of "instead of renaming, copy" together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree list" annotates each worktree according to its state such
as "prunable" or "locked", however it is not immediately obvious why
these worktrees are being annotated. For prunable worktrees a reason
is available that is returned by should_prune_worktree() and for locked
worktrees a reason might be available provided by the user via `lock`
command.
Let's teach "git worktree list" a --verbose mode that outputs the reason
why the worktrees are being annotated. The reason is a text that can take
virtually any size and appending the text on the default columned format
will make it difficult to extend the command with other annotations and
not fit nicely on the screen. In order to address this shortcoming the
annotation is then moved to the next line indented followed by the reason
If the reason is not available the annotation stays on the same line as
the worktree itself.
The output of "git worktree list" with verbose becomes like so:
$ git worktree list --verbose
...
/path/to/locked-no-reason acb124 [branch-a] locked
/path/to/locked-with-reason acc125 [branch-b]
locked: worktree with a locked reason
/path/to/prunable-reason ace127 [branch-d]
prunable: gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git worktree list" command shows the absolute path to the worktree,
the commit that is checked out, the name of the branch, and a "locked"
annotation if the worktree is locked, however, it does not indicate
whether the worktree is prunable.
The "prune" command will remove a worktree if it is prunable unless
`--dry-run` option is specified. This could lead to a worktree being
removed without the user realizing before it is too late, in case the
user forgets to pass --dry-run for instance. If the "list" command shows
which worktree is prunable, the user could verify before running
"git worktree prune" and hopefully prevents the working tree to be
removed "accidentally" on the worse case scenario.
Let's teach "git worktree list" to show when a worktree is a prunable
candidate for both default and porcelain format.
In the default format a "prunable" text is appended:
$ git worktree list
/path/to/main aba123 [main]
/path/to/linked 123abc [branch-a]
/path/to/prunable ace127 (detached HEAD) prunable
In the --porcelain format a prunable label is added followed by
its reason:
$ git worktree list --porcelain
...
worktree /path/to/prunable
HEAD abc1234abc1234abc1234abc1234abc1234abc12
detached
prunable gitdir file points to non-existent location
...
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit c57b3367be (worktree: teach `list` to annotate locked worktree,
2020-10-11) taught "git worktree list" to annotate locked worktrees by
appending "locked" text to its output, however, this is not listed in
the --porcelain format.
Teach "list --porcelain" to do the same and add a "locked" attribute
followed by its reason, thus making both default and porcelain format
consistent. If the locked reason is not available then only "locked"
is shown.
The output of the "git worktree list --porcelain" becomes like so:
$ git worktree list --porcelain
...
worktree /path/to/locked
HEAD 123abcdea123abcd123acbd123acbda123abcd12
detached
locked
worktree /path/to/locked-with-reason
HEAD abc123abc123abc123abc123abc123abc123abc1
detached
locked reason why it is locked
...
In porcelain mode, if the lock reason contains special characters
such as newlines, they are escaped with backslashes and the entire
reason is enclosed in double quotes. For example:
$ git worktree list --porcelain
...
locked "worktree's path mounted in\nremovable device"
...
Furthermore, let's update the documentation to state that some
attributes in the porcelain format might be listed alone or together
with its value depending whether the value is available or not. Thus
documenting the case of the new "locked" attribute.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the pack.writeReverseIndex configuration is respected in both
'git index-pack' and 'git pack-objects' (and therefore, all of their
callers), we can safely advertise it for use in the git-config manual.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Taylor Blau
Junio C Hamano
Jeff King
Derrick Stolee
Seth House
Johannes Schindelin
Jonathan Tan
Rafael Silva