| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Teach Git to use the "unborn" feature introduced in a previous patch as
follows: Git will always send the "unborn" argument if it is supported
by the server. During "git clone", if cloning an empty repository, Git
will use the new information to determine the local branch to create. In
all other cases, Git will ignore it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning, we choose the default branch based on the remote HEAD.
But if there is no remote HEAD reported (which could happen if the
target of the remote HEAD is unborn), we'll fall back to using our local
init.defaultBranch. Traditionally this hasn't been a big deal, because
most repos used "master" as the default. But these days it is likely to
cause confusion if the server and client implementations choose
different values (e.g., if the remote started with "main", we may choose
"master" locally, create commits there, and then the user is surprised
when they push to "master" and not "main").
To solve this, the remote needs to communicate the target of the HEAD
symref, even if it is unborn, and "git clone" needs to use this
information.
Currently, symrefs that have unborn targets (such as in this case) are
not communicated by the protocol. Teach Git to advertise and support the
"unborn" feature in "ls-refs" (by default, this is advertised, but
server administrators may turn this off through the lsrefs.unborn
config). This feature indicates that "ls-refs" supports the "unborn"
argument; when it is specified, "ls-refs" will send the HEAD symref with
the name of its unborn target.
This change is only for protocol v2. A similar change for protocol v0
would require independent protocol design (there being no analogous
position to signal support for "unborn") and client-side plumbing of the
data required, so the scope of this patch set is limited to protocol v2.
The client side will be updated to use this in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* jh/index-v2-doc-on-fsmn:
index-format.txt: document v2 format of file system monitor extension
|
|
Doc update.
* jb/midx-doc-update:
docs: multi-pack-index: remove note about future 'verify' work
|
|
Build optimization.
* rj/make-clean:
Makefile: don't use a versioned temp distribution directory
Makefile: don't try to clean old debian build product
gitweb/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include ../GIT-VERSION-FILE
Documentation/Makefile: conditionally include doc.dep
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Newer versions of xsltproc can assign IDs in HTML documents it
generates in a consistent manner. Use the feature to help format
HTML version of the user manual reproducibly.
* ae/doc-reproducible-html:
doc: make HTML manual reproducible
|
|
The glossary described a branch as an "active" line of development,
which is misleading---a stale and non-moving branch is still a
branch.
* so/glossary-branch-is-not-necessarily-active:
glossary: improve "branch" definition
|
|
"git $cmd $args", when $cmd is not a recognised subcommand, by
default tries to see if $cmd is a typo of an existing subcommand
and optionally executes the corrected command if there is only one
possibility, depending on the setting of help.autocorrect; the
users can now disable the whole thing, including the cycles spent
to find a likely typo, by setting the configuration variable to
'never'.
* dd/help-autocorrect-never:
help.c: help.autocorrect=never means "do not compute suggestions"
|
|
Update the documentation of the file system monitor extension to
describe version 2.
The format was extended to support opaque tokens in:
56c6910028 fsmonitor: change last update timestamp on the index_state to opaque token
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was implemented in the 'git multi-pack-index' command and
merged in 468b3221 (Merge branch 'ds/multi-pack-verify',
2018-10-10).
And there's no 'git midx' command.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'clean' target is still noticeably slow on cygwin, despite the
substantial improvement made by the previous patch. For example, the
second invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 12.364s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date (prior to
the previous patch, there would have been _two_ such invocations).
This is to ensure that the $(GIT_VERSION) make variable is set, once
that file had been included. However, the 'clean' target does not use
the $(GIT_VERSION) variable, directly or indirectly, so it does not
have any affect on what the target removes. Therefore, the time spent
on ensuring an up to date GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 10.361s, on my laptop,
giving an improvement of 16.20%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'clean' target is noticeably slow on cygwin, even for a 'do-nothing'
invocation of 'make clean'. For example, the second 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
GIT_VERSION = 2.29.0
...
make[1]: Entering directory '/home/ramsay/git/Documentation'
GEN mergetools-list.made
GEN cmd-list.made
GEN doc.dep
...
$
has been timed at 23.339s, using git v2.29.0, on my laptop (an old core
i5-4200M @ 2.50GHz, 8GB RAM, 1TB HDD).
Notice that, since the 'doc.dep' file does not exist, make takes the
time (about 8s) to generate several files in order to create the doc.dep
include file. (If an 'include' file is missing, but a target for the
said file is present in the Makefile, make will execute that target
and, if that file now exists, throw away all its internal data and
re-read and re-parse the Makefile). Having spent the time to include
the 'doc.dep' file, the 'clean' target immediately deletes those files.
The document dependencies specified in the 'doc.dep' include file,
expressed as make targets and prerequisites, do not affect what the
'clean' target removes. Therefore, the time spent in generating the
dependencies is completely wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include doc.dep' when the target is
not 'clean'. (This drops the time down to 12.364s, on my laptop, giving
an improvement of 47.02%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix for an old typo.
* sn/config-doc-typofix:
config.txt: fix a typo (backslash != backquote)
|
|
Code clean-up.
* ma/grep-init-default:
MyFirstObjectWalk: drop `init_walken_defaults()`
grep: copy struct in one fell swoop
grep: use designated initializers for `grep_defaults`
grep: don't set up a "default" repo for grep
|
|
The transport layer was taught to optionally exchange the session
ID assigned by the trace2 subsystem during fetch/push transactions.
* js/trace2-session-id:
receive-pack: log received client session ID
send-pack: advertise session ID in capabilities
upload-pack, serve: log received client session ID
fetch-pack: advertise session ID in capabilities
transport: log received server session ID
serve: advertise session ID in v2 capabilities
receive-pack: advertise session ID in v0 capabilities
upload-pack: advertise session ID in v0 capabilities
trace2: add a public function for getting the SID
docs: new transfer.advertiseSID option
docs: new capability to advertise session IDs
|
|
Various subcommands of "git config" that takes value_regex
learn the "--literal-value" option to take the value_regex option
as a literal string.
* ds/config-literal-value:
config doc: value-pattern is not necessarily a regexp
config: implement --fixed-value with --get*
config: plumb --fixed-value into config API
config: add --fixed-value option, un-implemented
t1300: add test for --replace-all with value-pattern
t1300: test "set all" mode with value-pattern
config: replace 'value_regex' with 'value_pattern'
config: convert multi_replace to flags
|
|
"git update-ref --stdin" learns to take multiple transactions in a
single session.
* ps/update-ref-multi-transaction:
update-ref: disallow "start" for ongoing transactions
p1400: use `git-update-ref --stdin` to test multiple transactions
update-ref: allow creation of multiple transactions
t1400: avoid touching refs on filesystem
|
|
Like die() and error(), a call to warning() will also trigger a
trace2 event.
* jt/trace-error-on-warning:
usage: add trace2 entry upon warning()
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git-parse-remote" shell script library outlived its usefulness.
* ab/retire-parse-remote:
submodule: fix fetch_in_submodule logic
parse-remote: remove this now-unused library
submodule: remove sh function in favor of helper
submodule: use "fetch" logic instead of custom remote discovery
|
|
Versions of docbook-xsl newer than 1.79.1 allows xsltproc to assign
IDs to nodes in the generated HTML consistently, to make the output
resulting from the same source stable and reproducible.
Pass the generate.consistent.ids parameter from the command line to
ask for this feature. Older versions of the tool simply ignores the
parameter and produces their output the same way as before this
change, so there is no need to check for toolchain version.
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old phrasing is at least questionable, if not wrong, as there are
a lot of branches out there that didn't see active development for
years, yet they are still branches, ready to become active again any
time.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Multiple "credential-store" backends can race to lock the same
file, causing everybody else but one to fail---reattempt locking
with some timeout to reduce the rate of the failure.
* sa/credential-store-timeout:
crendential-store: use timeout when locking file
|
|
Expectation for the original contributor after responding to a
review comment to use the explanation in a patch update has been
described.
* jc/do-not-just-explain-but-update-your-patch:
MyFirstContribition: answering questions is not the end of the story
|
|
Fix an option name in "gc" documentation.
* ab/gc-keep-base-option:
gc: rename keep_base_pack variable for --keep-largest-pack
gc docs: change --keep-base-pack to --keep-largest-pack
|
|
In a recent commit, we stopped calling `init_grep_defaults()` from this
function. Thus, by the end of the tutorial, we still haven't added any
contents to this function. Let's remove it for simplicity.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The introductory part of the "git config --help" mentions the
optional value-pattern argument, but give no hint that it can be
something other than a regular expression (worse, it just says
"POSIX regexp", which usually means BRE but the regexp the command
takes is ERE). Also, it needs to be documented that the '!' prefix
to negate the match, which is only mentioned in this part of the
document, works only with regexp and not with the --fixed-value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While help.autocorrect can be set to 0 to decline auto-execution of
possibly mistyped commands, it still spends cycles to compute the
suggestions, and it wastes screen real estate.
Update help.autocorrect to accept the string "never" to just exit
with error upon mistyped commands to help users who prefer to never
see suggested corrections at all.
While at it, introduce "immediate" as a more readable way to
immediately execute the auto-corrected command, which can be done
with negative value.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Emit a trace2 error event whenever warning() is called, just like when
die(), error(), or usage() is called.
This helps debugging issues that would trigger warnings but not errors.
In particular, this might have helped debugging an issue I encountered
with commit graphs at $DAYJOB [1].
There is a tradeoff between including potentially relevant messages and
cluttering up the trace output produced. I think that warning() messages
should be included in traces, because by its nature, Git is used over
multiple invocations of the Git tool, and a failure (currently traced)
in a Git invocation might be caused by an unexpected interaction in a
previous Git invocation that only has a warning (currently untraced) as
a symptom - as is the case in [1].
[1] https://lore.kernel.org/git/20200629220744.1054093-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A review exchange may begin with a reviewer asking "what did you
mean by this phrase in your log message (or here in the doc)?", the
author answering what was meant, and then the reviewer saying "ah,
that is what you meant---then the flow of the logic makes sense".
But that is not the happy end of the story. New contributors often
forget that the material that has been reviewed in the above exchange
is still unclear in the same way to the next person who reads it,
until it gets updated.
While we are in the vicinity, rephrase the verb "request" used to
refer to comments by reviewers to "suggest"---this matches the
contrast between "original" and "suggested" that appears later in
the same paragraph, and more importantly makes it clearer that it is
not like authors are to please reviewers' wishes but rather
reviewers are merely helping authors to polish their commits.
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
|
|
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --keep-base-pack option never existed in git.git. It was the name
for the --keep-largest-pack option in earlier revisions of that series
before it landed as ae4e89e549 ("gc: add --keep-largest-pack option",
2018-04-15).
The later patches in that series[1][2] weren't changed to also refer
to --keep-largest-pack, so we've had this reference to a nonexisting
option ever since the feature initially landed.
1. 55dfe13df9 ("gc: add gc.bigPackThreshold config", 2018-04-15)
2. 9806f5a7bf ("gc --auto: exclude base pack if not enough mem to
"repack -ad"", 2018-04-15)
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame -L :funcname -- path" did not work well for a path for
which a userdiff driver is defined.
* pb/blame-funcname-range-userdiff:
blame: simplify 'setup_blame_bloom_data' interface
blame: simplify 'setup_scoreboard' interface
blame: enable funcname blaming with userdiff driver
line-log: mention both modes in 'blame' and 'log' short help
doc: add more pointers to gitattributes(5) for userdiff
blame-options.txt: also mention 'funcname' in '-L' description
doc: line-range: improve formatting
doc: log, gitk: move '-L' description to 'line-range-options.txt'
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
While git-update-ref has recently grown commands which allow interactive
control of transactions in e48cf33b61 (update-ref: implement interactive
transaction handling, 2020-04-02), it is not yet possible to create
multiple transactions in a single session. To do so, one currently still
needs to invoke the executable multiple times.
This commit addresses this shortcoming by allowing the "start" command
to create a new transaction if the current transaction has already been
either committed or aborted.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous two commits removed the last use of a function in this
library, but most of it had been dead code for a while[1][2]. Only the
"get_default_remote" function was still being used.
Even though we had a manual page for this library it was never
intended (or I expect, actually) used outside of git.git. Let's just
remove it, if anyone still cares about a function here they can pull
them into their own project[3].
1. Last use of error_on_missing_default_upstream():
d03ebd411c ("rebase: remove the rebase.useBuiltin setting",
2019-03-18)
2. Last use of get_remote_merge_branch(): 49eb8d39c7 ("Remove
contrib/examples/*", 2018-03-25)
3. https://lore.kernel.org/git/87a6vmhdka.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Tan
Junio C Hamano
Jeff Hostetler
Johannes Berg
Ramsay Jones
Arnout Engelen
Sergey Organov
Štěpán Němec
Martin Ågren
Derrick Stolee
Drew DeVault
Simão Afonso
Ævar Arnfjörð Bjarmason
Patrick Steinhardt