| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As reported in [1], T is missing from the description of porcelain
status letters in git-status(1) (whereas T *is* documented in
git-diff-files(1) and friends). Document T right after M (modified)
because the two are very similar.
[1] https://github.com/fish-shell/fish-shell/issues/8311
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Porcelain status letter T is documented as "type of the file", which
is technically correct but not enough information for users that are
not so familiar with this term from systems programming. In particular,
given that the only supported file types are "regular file", "symbolic
link" and "submodule", the term "file type" is surely opaque to the
many(?) users who are not aware that symbolic links can be tracked -
I thought that a "chmod +x" could cause the T status (wrong, it's M).
Explicitly document the three file types so users know if/how they
want to handle this.
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 176ea74793 ("wt-status.c: handle worktree renames", 2017-12-27)
made a porcelain status like .R or .C possible. They occur only when
the source file is added to the index and the destination file is
added with --intent-to-add.
They also documented DR, but that status is impossible. The index
change D means that the source file does not exist in the index.
The worktree change R/C states that the file has been renamed/copied
since the index, but that's impossible if it did not exist there.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier "git log -m" was changed to always produce patch output,
which would break existing scripts, which has been reverted.
* jn/log-m-does-not-imply-p:
Revert 'diff-merges: let "-m" imply "-p"'
|
|
This reverts commit f5bfcc823ba242a46e20fb6f71c9fbf7ebb222fe, which
made "git log -m" imply "--patch" by default. The logic was that
"-m", which makes diff generation for merges perform a diff against
each parent, has no use unless I am viewing the diff, so we could save
the user some typing by turning on display of the resulting diff
automatically. That wasn't expected to adversely affect scripts
because scripts would either be using a command like "git diff-tree"
that already emits diffs by default or would be combining -m with a
diff generation option such as --name-status. By saving typing for
interactive use without adversely affecting scripts in the wild, it
would be a pure improvement.
The problem is that although diff generation options are only relevant
for the displayed diff, a script author can imagine them affecting
path limiting. For example, I might run
git log -w --format=%H -- README
hoping to list commits that edited README, excluding whitespace-only
changes. In fact, a whitespace-only change is not TREESAME so the use
of -w here has no effect (since we don't apply these diff generation
flags to the diff_options struct rev_info::pruning used for this
purpose), but the documentation suggests that it should work
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME. (In
a diff filtered for foo, they look different and equal,
respectively.)
and a script author who has not tested whitespace-only changes
wouldn't notice.
Similarly, a script author could include
git log -m --first-parent --format=%H -- README
to filter the first-parent history for commits that modified README.
The -m is a no-op but it reflects the script author's intent. For
example, until 1e20a407fe2 (stash list: stop passing "-m" to "git
log", 2021-05-21), "git stash list" did this.
As a result, we can't safely change "-m" to imply "-p" without fear of
breaking such scripts. Restore the previous behavior.
Noticed because Rust's src/bootstrap/bootstrap.py made use of this
same construct: https://github.com/rust-lang/rust/pull/87513. That
script has been updated to omit the unnecessary "-m" option, but we
can expect other scripts in the wild to have similar expectations.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc mark-up fix.
* ar/doc-markup-fix:
Documentation: render special characters correctly
|
|
The local changes stashed by "git merge --autostash" were lost when
the merge failed in certain ways, which has been corrected.
* pb/merge-autostash-more:
merge: apply autostash if merge strategy fails
merge: apply autostash if fast-forward fails
Documentation: define 'MERGE_AUTOSTASH'
merge: add missing word "strategy" to a message
|
|
Reorganize and update the SubmitingPatches document.
* ab/update-submitting-patches:
SubmittingPatches: replace discussion of Travis with GitHub Actions
SubmittingPatches: move discussion of Signed-off-by above "send"
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation fix for "git pull --rebase=no".
* fc/pull-no-rebase-merges-theirs-into-ours:
doc: pull: fix rebase=false documentation
|
|
Documentation around GIT_CONFIG has been updated.
* jk/config-env-doc:
doc/git-config: simplify "override" advice for FILES section
doc/git-config: clarify GIT_CONFIG environment variable
doc/git-config: explain --file instead of referring to GIT_CONFIG
|
|
Doc update.
* pb/submodule-recurse-doc:
doc: clarify description of 'submodule.recurse'
|
|
Three hyphens are rendered verbatim, so "--" has to be used to produce a
dash. There is no double arrow ("<->" is rendered as "<→"), so a left
and right arrow "<-->" have to be combined for that.
So fix asciidoc output for special characters. This is similar to fixes
in commit de82095a95 (doc hash-function-transition: fix asciidoc output,
2021-02-05).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
|
|
A guideline for gender neutral documentation has been added.
* ds/gender-neutral-doc-guidelines:
CodingGuidelines: recommend gender-neutral description
|
|
"git diff --merge-base" documentation has been updated.
* dl/diff-merge-base:
git-diff: fix missing --merge-base docs
|
|
"git worktree add --lock" learned to record why the worktree is
locked with a custom message.
* sm/worktree-add-lock:
worktree: teach `add` to accept --reason <string> with --lock
worktree: mark lock strings with `_()` for translation
t2400: clean up '"add" worktree with lock' test
|
|
The documentation for 'git merge --abort' and 'git merge --quit' both
mention the special ref 'MERGE_AUTOSTASH', but this ref is not formally
defined anywhere. Mention it in the description of the '--autostash'
option for 'git merge'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-list" learns to omit the "commit <object-name>" header
lines from the output with the `--no-commit-header` option.
* bc/rev-list-without-commit-line:
rev-list: add option for --pretty=format without header
|
|
Doc update.
* ab/gitignore-discovery-doc:
docs: .gitignore parsing is to the top of the repo
|
|
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
|
|
Typofix.
* jk/typofix:
doc/rev-list-options: fix duplicate word typo
|
|
Replace the discussion of Travis CI added in
0e5d028a7a0 (Documentation: add setup instructions for Travis CI,
2016-05-02) with something that covers the GitHub Actions added in
889cacb6897 (ci: configure GitHub Actions for CI/PR, 2020-04-11).
The setup is trivial compared to using Travis, and it even works on
Windows (that "hopefully soon" comment was probably out-of-date on
Travis as well).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the section discussing the addition of a SOB trailer above the
section that discusses generating the patch itself. This makes sense
as we don't want someone to go through the process of "git
format-patch", only to realize late that they should have used "git
commit -s" or equivalent.
This is a move-only change, no lines here are being altered, only
moved around.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pull --rebase=false" means we merge their history into ours, but
it has been described the other way around.
Cc: Stephen Haberman <stephen@exigencecorp.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: updated the log message]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The doc for 'submodule.recurse' starts with "Specifies if commands
recurse into submodles by default". This is not exactly true of all
commands that have a '--recurse-submodules' option. For example, 'git
pull --recurse-submodules' does not run 'git pull' in each submodule,
but rather runs 'git submodule update --recursive' so that the submodule
working trees after the pull matches the commits recorded in the
superproject.
Clarify that by just saying that it enables '--recurse-submodules'.
Note that the way this setting interacts with 'fetch.recurseSubmodules'
and 'push.recurseSubmodules', which can have other values than true or
false, is already documented since 4da9e99e6e (doc: be more precise on
(fetch|push).recurseSubmodules, 2020-04-06).
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
At the end of the FILES section, we indicate that you can override the
regular lookup rules with --global, etc. But:
- we're missing the --local option
- we point to GIT_CONFIG instead of --file, but the latter has much
better documentation
- we're vague about how the overrides work; the actual option
descriptions are much better here
So let's just mention the names and point people back to the OPTIONS
section. We could perhaps even delete this paragraph entirely, but the
presence of the names may give people reading FILES a clue about where
to look for more information.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scope and utility of the GIT_CONFIG variable was drastically reduced
by dc87183189 (Only use GIT_CONFIG in "git config", not other programs,
2008-06-30). But the documentation in git-config(1) predates that, which
makes it rather misleading.
These days it is really just another way to say "--file". So let's say
that, and explicitly make it clear that it does not impact other Git
commands (like GIT_CONFIG_SYSTEM, etc, would).
I also bumped it to the bottom of the list of variables, and warned
people off of using it. We don't have any plans for deprecation at this
point, but there's little point in encouraging people to use it by
putting it at the top of the list.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The explanation for the --file option only refers to GIT_CONFIG. This
redirection to an environment variable is confusing, but doubly so
because the description of GIT_CONFIG is out of date.
Let's describe --file from scratch, detailing both the reading and
writing behavior as we do for other similar options like --system, etc.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the documentation not to assume users are of certain gender
and adds to guidelines to do so.
* ds/gender-neutral-doc:
*: fix typos
comments: avoid using the gender of our users
doc: avoid using the gender of other people
|
|
Code recently added to support common ancestry negotiation during
"git push" did not sanity check its arguments carefully enough.
* ab/fetch-negotiate-segv-fix:
fetch: fix segfault in --negotiate-only without --negotiation-tip=*
fetch: document the --negotiate-only option
send-pack.c: move "no refs in common" abort earlier
|
|
Technical writing seeks to convey information with minimal
friction. One way that a reader can experience friction is if they
encounter a description of "a user" that is later simplified using a
gendered pronoun. If the reader does not consider that pronoun to
apply to them, then they can experience cognitive dissonance that
removes focus from the information.
Give some basic tips to guide us avoid unnecessary uses of gendered
description.
Using a gendered pronoun is appropriate when referring to a specific
person.
There are acceptable existing uses of gendered pronouns within the
Git codebase, such as:
* References to real people (e.g. Linus Torvalds, "the Git maintainer").
Do not misgender real people. If there is any doubt to the gender of a
person, then avoid using pronouns.
* References to fictional people with clear genders (e.g. Alice and
Bob).
* Sample text used in test cases (e.g t3702, t6432).
* The official text of the GPL license contains uses of "he or she",
but using singular "they" (or modifying the text in some other
way) is not within the scope of the Git project.
* Literal email messages in Documentation/howto/ should not be edited
for grammatical concerns such as this, unless we update the entire
document to fit the standard documentation format. If such an effort is
taken on, then the authorship would change and no longer refer to the
exact mail message.
* External projects consumed in contrib/ should not deviate solely for
style reasons. Recommended edits should be contributed to those
projects directly.
Other cases within the Git project were cleaned up by the previous
changes.
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These were last bumped in commit 92c57e5c1d29 (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 89973554b52c (diffcore-rename: make diff-tree -l0 mean
-l<large>, 2017-11-29), -l0 was given a special magical "large" value,
but one which was not large enough for some uses (as can be seen from
commit 9f7e4bfa3b6d (diff: remove silent clamp of renameLimit,
2017-11-13). Make 0 (or a negative value) be treated as unlimited
instead and update the documentation to mention this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few places in the docs implied that rename/copy detection is always
quadratic or that all (unpaired) files were involved in the quadratic
portion of rename/copy detection. The following two commits each
introduced an exception to this:
9027f53cb505 (Do linear-time/space rename logic for exact renames,
2007-10-25)
bd24aa2f97a0 (diffcore-rename: guide inexact rename detection based
on basenames, 2021-02-14)
(As a side note, for copy detection, the basename guided inexact rename
detection is turned off and the exact renames will only result in
sources (without the dests) being removed from the set of files used in
quadratic detection. So, for copy detection, the documentation was
closer to correct.)
Avoid implying that all files involved in rename/copy detection are
subject to the full quadratic algorithm. While at it, also note the
default values for all these settings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default reason stored in the lock file, "added with --lock",
is unlikely to be what the user would have given in a separate
`git worktree lock` command. Allowing `--reason` to be specified
along with `--lock` when adding a working tree gives the user control
over the reason for locking without needing a second command.
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc typo/grammo-fix.
* bk/doc-commit-typofix:
Documentation: fix typo in the --patch option of the commit command
|
|
Some code and doc clarification around "git push".
* fc/push-simple-updates:
doc: push: explain default=simple correctly
push: remove unused code in setup_push_upstream()
push: simplify setup_push_simple()
push: reorganize setup_push_simple()
push: copy code to setup_push_simple()
push: hedge code of default=simple
push: rename !triangular to same_remote
|
|
Reported-by: Jason Hatton <jhatton@globalfinishing.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc clean-up.
* dd/document-log-decorate-default:
doc/log: correct default for --decorate
|
Johannes Altmanninger
Junio C Hamano
Jonathan Nieder
Andrei Rybak
Philippe Blain
Ævar Arnfjörð Bjarmason
Felipe Contreras
Jeff King
Elijah Newren
Stephen Manz
Denton Liu
brian m. carlson