Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
|
|
|
|
By default, the command shows pathnames relative to the current
directory. Use --full-name (the same flag to do so in ls-files)
if you want to see the full pathname relative to the project root.
This makes it very pleasant to run in Emacs compilation (or
"grep-find") buffer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With this option, the changed words are shown inline. For example,
if a file containing "This is foo" is changed to "This is bar", the diff
will now show "This is " in plain text, "foo" in red, and "bar" in green.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A small howto on how to setup GIT over HTTP transport protocol by
setting up WebDAV access on apache2.
[jc: minimum ispell fixes applied]
Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Honza Pazdziora noticed that one example did not match reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Combine option descriptions in git-init-db(1). Reflect the changes to
additionally allow all users to read the created git repository.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: added an example section.]
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There isn't and never was such a macro; all uses are typos.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was already documented in the options section of the manpage. This
patch implements it, adds it to the usage message, and mentions it at the
top of the manpage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
enable/disable colored output when the pager is in use
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Since you can tar just a subdirectory of a certain revision, tell
the users so, by showing an example how to do it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* pb/multi-fetch:
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
Make pull() take some implicit data as explicit arguments
|
|
* js/alias-p:
git wrapper: add --git-dir=<path> and --bare options
Allow an alias to start with "-p"
|
|
Speeds up things quite a lot when fetching tags with Cogito.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes it possible to fetch many commits (refs) at once, greatly
speeding up cg-clone.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* pb/configure:
Rename man1 and man7 variables to man1dir and man7dir
Allow INSTALL, bindir, mandir to be set in main Makefile
|
|
With this, you can say
git --bare repack -a -d
inside a bare repository, and it will actually work. While at it,
also move the --version, --help and --exec-path options to the
handle_options() function.
While at documenting the new options, also document the --paginate
option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jt/format-patch:
builtin-log: typefix for recent format-patch changes.
Add option to set initial In-Reply-To/References
Add option to enable threading headers
git-format-patch: Make the second and subsequent mails replies to the first
|
|
* lt/objformat:
sha1_file: add the ability to parse objects in "pack file format"
|
|
For some repositories, deltas simply don't make sense. One can disable
them for git-repack by adding --window, but git-push insists on making
the deltas which can be very CPU-intensive for little benefit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
By default, git-tar-tree(1) sets file and directories modes to 0666
or 0777. While this is both useful and acceptable for projects such
as the Linux Kernel, it might be excessive for other projects. With
this variable, it becomes possible to tell git-tar-tree(1) to apply
a specific umask to the modes above. The special value "user"
indicates that the user's current umask will be used. This should be
enough for most projects, as it will lead to the same permissions as
git-checkout(1) would use. The default value remains 0, which means
world read-write.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch adds support for -a which will add an "Author: " line, and possibly
a "Committer: " line to the bottom of the commit message for CVS.
The commit message parser is now a little bit better, and some warnings
have been cleaned up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add the --in-reply-to option to provide a Message-Id for an initial
In-Reply-To/References header, useful for including a new patch series as part
of an existing thread.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add a --thread option to enable generation of In-Reply-To and References
headers, used to make the second and subsequent mails appear as replies to the
first.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes "[user@]" to use {startsb} and {endsb} to insert [ and ],
similar to how {caret} is used in git-rev-parse.txt.
[jc: Removed a well-intentioned comment that broke the final
formatting from the original patch. While we are at it,
updated the paragraph that claims to be equivalent to the
section that was updated earlier without making matching
changes.]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
The pack-file format is slightly different from the traditional git
object format, in that it has a much denser binary header encoding.
The traditional format uses an ASCII string with type and length
information, which is somewhat wasteful.
A new object format starts with uncompressed binary header
followed by compressed payload -- this will allow us later to
copy the payload straight to packfiles.
Obviously they cannot be read by older versions of git, so for
now new object files are created with the traditional format.
core.legacyheaders configuration item, when set to false makes
the code write in new format for people to experiment with.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use .git/info/exclude in the example in git-ls-files.txt,
instead of .git/ignore, and update the list of commands looking
at .git/info/exclude in repository-layout.txt.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier commit c3f17061 broke asciidoc markup.
Noticed by Alp Toker with a fix, but fixed up in a way with smaller
formatting impact.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* ml/trace:
test-lib: unset GIT_TRACE
GIT_TRACE: fix a mixed declarations and code warning
GIT_TRACE: show which built-in/external commands are executed
|
|
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* ew/diff:
templates/hooks--update: replace diffstat calls with git diff --stat
diff: do not use configuration magic at the core-level
Update diff-options and config documentation.
diff.c: --no-color to defeat diff.color configuration.
diff.c: respect diff.renames config option
|
|
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
|
|
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alp Toker <alp@atoker.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|