| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* jk/doc-credential-helper:
doc: move credential helper info into gitcredentials(7)
|
|
Both "git ls-remote -h" and "git grep -h" give short usage help,
like any other Git subcommand, but it is not unreasonable to expect
that the former would behave the same as "git ls-remote --head"
(there is no other sensible behaviour for the latter). The
documentation has been updated in an attempt to clarify this.
* jc/doc-single-h-is-for-help:
Documentation: clarify that `-h` alone stands for `help`
|
|
"git check-ignore" did not work when the given path is explicitly
marked as not ignored with a negative entry in the .gitignore file.
* en/check-ignore:
check-ignore: fix documentation and implementation to match
|
|
Doc markup fix.
* jk/push-option-doc-markup-fix:
doc/config/push: use longer "--" line for preformatted example
|
|
Update to doc-diff.
* jk/doc-diff-parallel:
doc-diff: use single-colon rule in rendering Makefile
|
|
We seem to be getting new users who get confused every 20 months or
so with this "-h consistently wants to give help, but the commands
to which `-h` may feel like a good short-form option want it to mean
something else." compromise.
Let's make sure that the readers know that `git cmd -h` (with no
other arguments) is a way to get usage text, even for commands like
ls-remote and grep.
Also extend the description that is already in gitcli.txt, as it is
clear that users still get confused with the current text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ignore has two different modes, and neither of these modes has an
implementation that matches the documentation. These modes differ in
whether they just print paths or whether they also print the final
pattern matched by the path. The fix is different for both modes, so
I'll discuss both separately.
=== First (default) mode ===
The first mode is documented as:
For each pathname given via the command-line or from a file via
--stdin, check whether the file is excluded by .gitignore (or other
input files to the exclude mechanism) and output the path if it is
excluded.
However, it fails to do this because it did not account for negated
patterns. Commands other than check-ignore verify exclusion rules via
calling
... -> treat_one_path() -> is_excluded() -> last_matching_pattern()
while check-ignore has a call path of the form:
... -> check_ignore() -> last_matching_pattern()
The fact that the latter does not include the call to is_excluded()
means that it is susceptible to to messing up negated patterns (since
that is the only significant thing is_excluded() adds over
last_matching_pattern()). Unfortunately, we can't make it just call
is_excluded(), because the same codepath is used by the verbose mode
which needs to know the matched pattern in question. This brings us
to...
=== Second (verbose) mode ===
The second mode, known as verbose mode, references the first in the
documentation and says:
Also output details about the matching pattern (if any) for each
given pathname. For precedence rules within and between exclude
sources, see gitignore(5).
The "Also" means it will print patterns that match the exclude rules as
noted for the first mode, and also print which pattern matches. Unless
more information is printed than just pathname and pattern (which is not
done), this definition is somewhat ill-defined and perhaps even
self-contradictory for negated patterns: A path which matches a negated
exclude pattern is NOT excluded and thus shouldn't be printed by the
former logic, while it certainly does match one of the explicit patterns
and thus should be printed by the latter logic.
=== Resolution ==
Since the second mode exists to find out which pattern matches given
paths, and showing the user a pattern that begins with a '!' is
sufficient for them to figure out whether the pattern is excluded, the
existing behavior is desirable -- we just need to update the
documentation to match the implementation (i.e. it is about printing
which pattern is matched by paths, not about showing which paths are
excluded).
For the first or default mode, users just want to know whether a pattern
is excluded. As such, the existing documentation is desirable; change
the implementation to match the documented behavior.
Finally, also adjust a few tests in t0008 that were caught up by this
discrepancy in how negated paths were handled.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rendering the troff manpages to text via "man", we create an ad-hoc
Makefile and feed it to "make". The purpose here is two-fold:
- reuse results from a prior interrupted render of the same tree
- use make's -j option to build in parallel
But the second part doesn't seem to work (at least with my version of
GNU make, 4.2.1). It just runs one render at a time.
We use a double-colon "all" rule for each file, like:
all:: foo
foo:
...actual render recipe...
all:: bar
bar:
...actual render recipe...
...and so on...
And it's this double-colon that seems to inhibit the parallelism. We can
just switch to a regular single-colon rule. Even though we do have
multiple rules for "all" here, we don't have any recipe to execute for
"all" (we only care about triggering its dependencies), so the
distinction is irrelevant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The example for the push.pushOption config tries to create a
preformatted section, but uses only two dashes in its "--" line. In
AsciiDoc this is an "open block", with no type; the lines end up jumbled
because they're formatted as paragraphs. We need four or more dashes to
make it a "listing block" that will respect the linebreaks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The details of how credential helpers can be called or implemented were
originally covered in Documentation/technical/. Those are topics that
end users might care about (and we even referenced them in the
credentials manpage), but those docs typically don't ship as part of the
end user documentation, making them less useful.
This situation got slightly worse recently in f3b9055624 (credential:
move doc to credential.h, 2019-11-17), where we moved them into the C
header file, making them even harder to find.
So let's move put this information into the gitcredentials(7)
documentation, which is meant to describe the overall concepts of our
credential handling. This was already pointing to the API docs for these
concepts, so we can just include it inline instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc fix.
* jb/multi-pack-index-docfix:
pack-format: correct multi-pack-index description
|
|
Doc clarification.
* ma/diff-doc-clarify-regexp-example:
diff-options.txt: avoid "regex" overload in example
|
|
Technical details of the bundle format has been documented.
I think this is in a good enough shape.
* ms/doc-bundle-format:
doc: describe Git bundle format
|
|
Doc mark-up updates.
* ma/filter-branch-doc-caret:
git-filter-branch.txt: wrap "maths" notation in backticks
|
|
Docfix.
* km/submodule-doc-use-sm-path:
submodule foreach: replace $path with $sm_path in example
|
|
"git grep --no-index" should not get affected by the contents of
the .gitmodules file but when "--recurse-submodules" is given or
the "submodule.recurse" variable is set, it did. Now these
settings are ignored in the "--no-index" mode.
* pb/do-not-recurse-grep-no-index:
grep: ignore --recurse-submodules if --no-index is given
|
|
Doc updates.
* bc/misconception-doc:
docs: mention when increasing http.postBuffer is valuable
doc: dissuade users from trying to ignore tracked files
|
|
Clarify documentation on committer/author identities.
* bc/author-committer-doc:
doc: provide guidance on user.name format
docs: expand on possible and recommended user config options
doc: move author and committer information to git-commit(1)
|
|
"git fetch --refmap=" option has got a better documentation.
* ds/refmap-doc:
fetch: document and test --refmap=""
|
|
Doc grammo fix.
* bc/actualmente:
docs: use "currently" for the present time
|
|
Complete an update to tutorial that encourages "git switch" over
"git checkout" that was done only half-way.
* hw/tutorial-favor-switch-over-checkout:
doc/gitcore-tutorial: fix prose to match example command
|
|
The description of the multi-pack-index contains a small bug,
if all offsets are < 2^32 then there will be no LOFF chunk,
not only if they're all < 2^31 (since the highest bit is only
needed as the "LOFF-escape" when that's actually needed.)
Correct this, and clarify that in that case only offsets up
to 2^31-1 can be stored in the OOFF chunk.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we exemplify the difference between `-G` and `-S` (using
`--pickaxe-regex`), we do so using an example diff and git-diff
invocation involving "regexec", "regexp", "regmatch", ...
The example is correct, but we can make it easier to untangle by
avoiding writing "regex.*" unless it's really needed to make our point.
Use some made-up, non-regexy words instead.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bundle format was not documented. Describe the format with ABNF and
explain the meaning of each part.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In this paragraph, we have a few instances of the '^' character, which
we give as "\^". This renders well with AsciiDoc ("^"), but Asciidoctor
renders it literally as "\^". Dropping the backslashes renders fine
with Asciidoctor, but not AsciiDoc...
An earlier version of this patch used "{caret}" instead of "^", which
avoided these escaping problems. The rendering was still so-so, though
-- these expressions end up set as normal text, similarly to when one
provides, e.g., computer code in the middle of running text, without
properly marking it with `backticks` to be monospaced.
As noted by Jeff King, this suggests actually wrapping these
expressions in backticks, setting them in monospace.
The lone "5" could be left as is or wrapped as `5`. Spell it out as
"five" instead -- this generally looks better anyway for small numbers
in the middle of text like this.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
f0fd0dc5c5 (submodule foreach: document '$sm_path' instead of '$path',
2018-05-08) updated the documentation to advise callers to favor
$sm_path over the deprecated synonym $path. However, the example in
that section still uses $path. Update it to use $sm_path.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since grep learned to recurse into submodules in 0281e487fd
(grep: optionally recurse into submodules, 2016-12-16),
using --recurse-submodules along with --no-index makes Git
die().
This is unfortunate because if submodule.recurse is set in a user's
~/.gitconfig, invoking `git grep --no-index` either inside or outside
a Git repository results in
fatal: option not supported with --recurse-submodules
Let's allow using these options together, so that setting submodule.recurse
globally does not prevent using `git grep --no-index`.
Using `--recurse-submodules` should not have any effect if `--no-index`
is used inside a repository, as Git will recurse into the checked out
submodule directories just like into regular directories.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users in a wide variety of situations find themselves with HTTP push
problems. Oftentimes these issues are due to antivirus software,
filtering proxies, or other man-in-the-middle situations; other times,
they are due to simple unreliability of the network.
However, a common solution to HTTP push problems found online is to
increase http.postBuffer. This works for none of the aforementioned
situations and is only useful in a small, highly restricted number of
cases: essentially, when the connection does not properly support
HTTP/1.1.
Document when raising this value is appropriate and what it actually
does, and discourage people from using it as a general solution for push
problems, since it is not effective there.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is quite common for users to want to ignore the changes to a file
that Git tracks. Common scenarios for this case are IDE settings and
configuration files, which should generally not be tracked and possibly
generated from tracked files using a templating mechanism.
However, users learn about the assume-unchanged and skip-worktree bits
and try to use them to do this anyway. This is problematic, because
when these bits are set, many operations behave as the user expects, but
they usually do not help when git checkout needs to replace a file.
There is no sensible behavior in this case, because sometimes the data
is precious, such as certain configuration files, and sometimes it is
irrelevant data that the user would be happy to discard.
Since this is not a supported configuration and users are prone to
misuse the existing features for unintended purposes, causing general
sadness and confusion, let's document the existing behavior and the
pitfalls in the documentation for git update-index so that users know
they should explore alternate solutions.
In addition, let's provide a recommended solution to dealing with the
common case of configuration files, since there are well-known
approaches used successfully in many environments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a frequent misconception that the user.name variable controls
authentication in some way, and as a result, beginning users frequently
attempt to change it when they're having authentication troubles.
Document that the convention is that this variable represents some form
of a human's personal name, although that is not required. In addition,
address concerns about whether Unicode is supported.
Use the term "personal name" as this is likely to draw the intended
contrast, be applicable across cultures which may have different naming
conventions, and be easily understandable to people who do not speak
English as their first language. Indicate that "some form" is
conventionally used, as people may use a nickname or preferred name
instead of a full legal name.
Point users who may be confused about authentication to an appropriate
configuration option instead. Provide a shortened form of this
information in the configuration option description.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the section on setting author and committer information, we omit the
author.* and committer.* variables, so mention them for completeness.
In addition, guide users to the typical case: simply setting user.name
and user.email, which are recommended if one does not need complex
configuration.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at one time it made perfect sense to store information about
configuring author and committer information in the documentation for
git commit-tree, in modern Git that operation is seldom used. Most
users will use git commit and expect to find comprehensive documentation
about its use in the manual page for that command.
Considering that there is significant confusion about how one is to use
the user.name and user.email variables, let's put as much documentation
as possible into an obvious place where users will be more likely to
find it.
In addition, expand the environment variables section to describe their
use more fully. Even though we now describe all of the options there
and in the configuration settings documentation, preserve the existing
text in git-commit.txt so that people can easily reason about the
ordering of the various options they can use. Explain the use of the
author.* and committer.* options as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many languages, the adverb with the root "actual" means "at the
present time." However, this usage is considered dated or even archaic
in English, and for referring to events occurring at the present time,
we usually prefer "currently" or "presently". "Actually" is commonly
used in modern English only for the meaning of "in fact" or to express a
contrast with what is expected.
Since the documentation refers to the available options at the present
time (that is, at the time of writing) instead of drawing a contrast,
let's switch to "currently," which both is commonly used and sounds less
formal than "presently."
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prevent long blocking time during a 'git fetch' call, a user
may want to set up a schedule for background 'git fetch' processes.
However, these runs will update the refs/remotes branches due to
the default refspec set in the config when Git adds a remote.
Hence the user will not notice when remote refs are updated during
their foreground fetches. In fact, they may _want_ those refs to
stay put so they can work with the refs from their last foreground
fetch call.
This can be accomplished by overriding the configured refspec using
'--refmap=' along with a custom refspec:
git fetch --refmap='' <remote> +refs/heads/*:refs/hidden/<remote>/*
to populate a custom ref space and download a pack of the new
reachable objects. This kind of call allows a few things to happen:
1. We download a new pack if refs have updated.
2. Since the refs/hidden branches exist, GC will not remove the
newly-downloaded data.
3. With fetch.writeCommitGraph enabled, the refs/hidden refs are
used to update the commit-graph file.
To avoid the refs/hidden directory from filling without bound, the
--prune option can be included. When providing a refspec like this,
the --prune option does not delete remote refs and instead only
deletes refs in the target refspace.
Update the documentation to clarify how '--refmap=""' works and
create tests to guarantee this behavior remains in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 5d9324e0f4210bb7d52bcb79efe3935703083f72, reversing
changes made to c58ae96fc4bb11916b62a96940bb70bb85ea5992.
The topic turns out to be too buggy for real use.
cf. <f2fe7437-8a48-3315-4d3f-8d51fe4bb8f1@gmail.com>
|
|
Documentation markup fix.
* ma/config-advice-markup-fix:
config/advice.txt: fix description list separator
|
|
The whole submoduleAlternateErrorStrategyDie item is interpreted as
being part of the supporting content of the preceding item. This is
because we don't give a double-colon "::" for the separator, but just a
single colon, ":". Let's fix that.
There are a few other matches for [^:]:\s*$ in Documentation/config, but
I didn't spot any similar bugs among them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* tm/doc-submodule-absorb-fix:
doc: submodule: fix typo for command absorbgitdirs
|
|
Doc update.
* pm/am-in-body-header-doc-update:
am: document that Date: can appear as an in-body header
|
|
Typofix.
* jb/doc-multi-pack-idx-fix:
multi-pack-index: correct configuration in documentation
|
|
In 328c6cb853 (doc: promote "git switch", 2019-03-29), an example
was changed to use "git switch" rather than "git checkout" but an
instance of "git checkout" in the explanatory text preceding the
example was overlooked. Fix this oversight.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* ds/sparse-cone:
Documentation/git-sparse-checkout.txt: fix a typo
sparse-checkout: use extern for global variables
|
|
"git sparse-checkout list" subcommand learned to give its output in
a more concise form when the "cone" mode is in effect.
* ds/sparse-list-in-cone-mode:
sparse-checkout: document interactions with submodules
sparse-checkout: list directories in cone mode
|
|
Doc update.
* pb/clarify-line-log-doc:
doc: log, gitk: line-log arguments must exist in starting revision
doc: log, gitk: document accepted line-log diff formats
|
|
The sentence wants to talk about the superproject's possesive, not plural form.
Signed-off-by: Thomas Menzel <dev@tomsit.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to "From:" and "Subject:" already mentioned in the
documentation, "Date:" can also appear as an in-body header
to override the value in the e-mail headers. Document it.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Jeff King
Johannes Berg
Martin Ågren
Masaya Suzuki
Kyle Meyer
Philippe Blain
brian m. carlson
Derrick Stolee
Heba Waly
Thomas Menzel
Paul Menzel